Provided by: libmojolicious-perl_9.31+dfsg-1_all 
NAME
Mojolicious::Guides::Cookbook - Cooking with Mojolicious
OVERVIEW
This document contains many fun recipes for cooking with Mojolicious.
CONCEPTS
Essentials every Mojolicious developer should know.
Blocking and non-blocking operations
A blocking operation is a subroutine that blocks the execution of the calling subroutine
until the subroutine is finished.
sub foo {
my $result = blocking_subroutine();
...
}
A non-blocking operation on the other hand lets the calling subroutine continue execution
even though the subroutine is not yet finished. Instead of waiting, the calling subroutine
passes along a callback to be executed once the subroutine is finished, this is called
continuation-passing style.
sub foo {
non_blocking_subroutine(sub ($result) {
...
});
...
}
While Mojolicious has been designed from the ground up for non-blocking I/O and event
loops, it is not possible to magically make Perl code non-blocking. You have to use
specialized non-blocking code available through modules like Mojo::IOLoop and
Mojo::UserAgent, or third-party event loops. You can wrap your blocking code in
subprocesses though to prevent it from interfering with your non-blocking code.
Event loops
An event loop is basically a loop that continually tests for external events and executes
the appropriate callbacks to handle them, it is often the main loop in a program. Non-
blocking tests for readability/writability of file descriptors and timers are commonly
used events for highly scalable network servers, because they allow a single process to
handle thousands of client connections concurrently.
while (1) {
my @readable = test_fds_for_readability();
handle_readable_fds(@readable);
my @writable = test_fds_for_writability();
handle_writable_fds(@writable);
my @expired = test_timers();
handle_timers(@expired);
}
In Mojolicious this event loop is Mojo::IOLoop.
Reverse proxy
A reverse proxy architecture is a deployment technique used in many production
environments, where a reverse proxy server is put in front of your application to act as
the endpoint accessible by external clients. It can provide a lot of benefits, like
terminating SSL connections from the outside, limiting the number of concurrent open
sockets towards the Mojolicious application (or even using Unix sockets), balancing load
across multiple instances, or supporting several applications through the same IP/port.
..........................................
: :
+--------+ : +-----------+ +---------------+ :
| |-------->| | | | :
| client | : | reverse |----->| Mojolicious | :
| |<--------| proxy | | application | :
+--------+ : | |<-----| | :
: +-----------+ +---------------+ :
: :
.. system boundary (e.g. same host) ......
This setup introduces some problems, though: the application will receive requests from
the reverse proxy instead of the original client; the address/hostname where your
application lives internally will be different from the one visible from the outside; and
if terminating SSL, the reverse proxy exposes services via HTTPS while using HTTP towards
the Mojolicious application.
As an example, compare a sample request from the client and what the Mojolicious
application receives:
client reverse proxy Mojolicious app
__|__ _______________|______________ ____|____
/ \ / \ / \
1.2.3.4 --HTTPS--> api.example.com 10.20.30.39 --HTTP--> 10.20.30.40
GET /foo/1 HTTP/1.1 | GET /foo/1 HTTP/1.1
Host: api.example.com | Host: 10.20.30.40
User-Agent: Firefox | User-Agent: ShinyProxy/1.2
... | ...
However, now the client address is no longer available (which might be useful for
analytics, or Geo-IP) and URLs generated via "url_for" in Mojolicious::Controller will
look like this:
http://10.20.30.40/bar/2
instead of something meaningful for the client, like this:
https://api.example.com/bar/2
To solve these problems, you can configure your reverse proxy to send the missing data
(see "Nginx" and "Apache/mod_proxy") and tell your application about it by setting the
environment variable "MOJO_REVERSE_PROXY". In more complex situations, usually involving
multiple proxies or proxies that live outside your network, it can be necessary to tell
the application from which ip addresses to expect proxy requests by setting
"MOJO_TRUSTED_PROXIES" to a list of comma separated addresses or CIDR networks. For even
finer control, "Rewriting" includes examples of how the changes could be implemented
manually.
DEPLOYMENT
Getting Mojolicious and Mojolicious::Lite applications running on different platforms.
Note that many real-time web features are based on the Mojo::IOLoop event loop, and
therefore require one of the built-in web servers to be able to use them to their full
potential.
Built-in web server
Mojolicious contains a very portable non-blocking I/O HTTP and WebSocket server with
Mojo::Server::Daemon. It is usually used during development and in the construction of
more advanced web servers, but is solid and fast enough for small to mid sized
applications.
$ ./script/my_app daemon
Web application available at http://127.0.0.1:3000
It is available to every application through the command Mojolicious::Command::daemon,
which has many configuration options and is known to work on every platform Perl works on
with its single-process architecture.
$ ./script/my_app daemon -h
...List of available options...
Another huge advantage is that it supports TLS and WebSockets out of the box, a
development certificate for testing purposes is built right in, so it just works, but you
can specify all listen locations supported by "listen" in Mojo::Server::Daemon.
$ ./script/my_app daemon -l https://[::]:3000
Web application available at https://[::]:3000
To manage the web server with systemd, you can use a unit configuration file like this.
[Unit]
Description=My Mojolicious application
After=network.target
[Service]
Type=simple
User=sri
ExecStart=/home/sri/myapp/script/my_app daemon -m production -l http://*:8080
[Install]
WantedBy=multi-user.target
Pre-forking
For bigger applications Mojolicious contains the UNIX optimized pre-forking web server
Mojo::Server::Prefork, which can take advantage of multiple CPU cores and copy-on-write
memory management to scale up to thousands of concurrent client connections.
Mojo::Server::Prefork
|- Mojo::Server::Daemon [1]
|- Mojo::Server::Daemon [2]
|- Mojo::Server::Daemon [3]
+- Mojo::Server::Daemon [4]
It is based on Mojo::Server::Daemon and available to every application through the command
Mojolicious::Command::prefork.
$ ./script/my_app prefork
Web application available at http://127.0.0.1:3000
Since all built-in web servers are based on the Mojo::IOLoop event loop, they scale best
with non-blocking operations. But if your application for some reason needs to perform
many blocking operations, you can improve performance by increasing the number of worker
processes and decreasing the number of concurrent connections each worker is allowed to
handle (often as low as 1).
$ ./script/my_app prefork -m production -w 10 -c 1
Web application available at http://127.0.0.1:3000
During startup your application is preloaded in the manager process, which does not run an
event loop, so you can use "next_tick" in Mojo::IOLoop to run code whenever a new worker
process has been forked and its event loop gets started.
use Mojolicious::Lite;
Mojo::IOLoop->next_tick(sub ($ioloop) {
app->log->info("Worker $$ star...ALL GLORY TO THE HYPNOTOAD!");
});
get '/' => {text => 'Hello Wor...ALL GLORY TO THE HYPNOTOAD!'};
app->start;
And to manage the pre-forking web server with systemd, you can use a unit configuration
file like this.
[Unit]
Description=My Mojolicious application
After=network.target
[Service]
Type=simple
User=sri
ExecStart=/home/sri/myapp/script/my_app prefork -m production -l http://*:8080
[Install]
WantedBy=multi-user.target
Morbo
After reading the Mojolicious::Guides::Tutorial, you should already be familiar with
Mojo::Server::Morbo.
Mojo::Server::Morbo
+- Mojo::Server::Daemon
It is basically a restarter that forks a new Mojo::Server::Daemon web server whenever a
file in your project changes, and should therefore only be used during development. To
start applications with it you can use the morbo script.
$ morbo ./script/my_app
Web application available at http://127.0.0.1:3000
Containers
There are many ways to go cloud-native with Mojolicious. To get you started with
containerizing your web applications we will explore one of them in this recipe. First,
you will need to declare the CPAN dependencies of your application, for example in a
"Makefile.PL" file. This should always include at the very least Mojolicious itself.
use strict;
use warnings;
use ExtUtils::MakeMaker;
WriteMakefile(
VERSION => '0.01',
PREREQ_PM => {
'Mojolicious' => '8.65',
'Mojolicious::Plugin::Status' => '1.12'
},
test => {TESTS => 't/*.t'}
);
The helper command Mojolicious::Command::Author::generate::makefile can also generate a
minimal "Makefile.PL" for you.
$ ./myapp.pl generate makefile
...
And then we are going to need a "Dockerfile" describing the container. A very simple one
will do for now.
FROM perl
WORKDIR /opt/myapp
COPY . .
RUN cpanm --installdeps -n .
EXPOSE 3000
CMD ./myapp.pl prefork
It uses the latest Perl container <https://hub.docker.com/_/perl> from Docker Hub, copies
all the contents of your application directory into the container, installs CPAN
dependencies with App::cpanminus, and then starts the application on port 3000 with the
pre-forking web server. With Mojolicious::Command::Author::generate::dockerfile there is
also a helper command to generate a minimal "Dockerfile" for you.
$ ./myapp.pl generate dockerfile
...
To build and deploy our container there are also many options available, here we will
simply use Docker.
$ docker build -t myapp_image .
...
$ docker run -d -p 3000:3000 --name myapp_container myapp_image
...
And now your web application should be deployed as a container under
"http://127.0.0.1:3000". For more information and many more container deployment options
we recommend the Docker <https://docs.docker.com/> and Kubernetes
<https://kubernetes.io/docs/> documentation.
Hypnotoad
Hypnotoad is based on the Mojo::Server::Prefork web server, and adds some features
especially optimized for high availability non-containerized production environments. To
start applications with it you can use the hypnotoad script, which listens on port 8080,
automatically daemonizes the server process and defaults to "production" mode for
Mojolicious and Mojolicious::Lite applications.
$ hypnotoad ./script/my_app
Many configuration settings can be tweaked right from within your application with
"config" in Mojolicious, for a full list see "SETTINGS" in Mojo::Server::Hypnotoad.
use Mojolicious::Lite;
app->config(hypnotoad => {listen => ['http://*:80']});
get '/' => {text => 'Hello Wor...ALL GLORY TO THE HYPNOTOAD!'};
app->start;
Or just add a "hypnotoad" section to your Mojolicious::Plugin::Config,
Mojolicious::Plugin::JSONConfig or Mojolicious::Plugin::NotYAMLConfig configuration file.
# myapp.conf
{
hypnotoad => {
listen => ['https://*:443?cert=/etc/server.crt&key=/etc/server.key'],
workers => 10
}
};
But one of its biggest advantages is the support for effortless zero downtime software
upgrades (hot deployment). That means you can upgrade Mojolicious, Perl or even system
libraries at runtime without ever stopping the server or losing a single incoming
connection, just by running the command above again.
$ hypnotoad ./script/my_app
Starting hot deployment for Hypnotoad server 31841.
You might also want to enable proxy support if you're using Hypnotoad behind a reverse
proxy. This allows Mojolicious to automatically pick up the "X-Forwarded-For" and
"X-Forwarded-Proto" headers.
# myapp.conf
{hypnotoad => {proxy => 1}};
To manage Hypnotoad with systemd, you can use a unit configuration file like this.
[Unit]
Description=My Mojolicious application
After=network.target
[Service]
Type=forking
User=sri
PIDFile=/home/sri/myapp/script/hypnotoad.pid
ExecStart=/path/to/hypnotoad /home/sri/myapp/script/my_app
ExecReload=/path/to/hypnotoad /home/sri/myapp/script/my_app
KillMode=process
[Install]
WantedBy=multi-user.target
Zero downtime software upgrades
Hypnotoad makes zero downtime software upgrades (hot deployment) very simple, as you can
see above, but on modern operating systems that support the "SO_REUSEPORT" socket option,
there is also another method available that works with all built-in web servers.
$ ./script/my_app prefork -P /tmp/first.pid -l http://*:8080?reuse=1
Web application available at http://127.0.0.1:8080
All you have to do, is to start a second web server listening to the same port, and stop
the first web server gracefully afterwards.
$ ./script/my_app prefork -P /tmp/second.pid -l http://*:8080?reuse=1
Web application available at http://127.0.0.1:8080
$ kill -s TERM `cat /tmp/first.pid`
Just remember that both web servers need to be started with the "reuse" parameter.
Nginx
One of the most popular setups these days is Hypnotoad behind an Nginx <https://nginx.org>
reverse proxy, which even supports WebSockets in newer versions.
upstream myapp {
server 127.0.0.1:8080;
}
server {
listen 80;
server_name localhost;
location / {
proxy_pass http://myapp;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
proxy_set_header Host $host;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
}
}
Apache/mod_proxy
Another good reverse proxy is Apache <https://httpd.apache.org> with "mod_proxy", the
configuration looks quite similar to the Nginx one above. And if you need WebSocket
support, newer versions come with "mod_proxy_wstunnel".
<VirtualHost *:80>
ServerName localhost
<Proxy *>
Require all granted
</Proxy>
ProxyRequests Off
ProxyPreserveHost On
ProxyPass /echo ws://localhost:8080/echo
ProxyPass / http://localhost:8080/ keepalive=On
ProxyPassReverse / http://localhost:8080/
RequestHeader set X-Forwarded-Proto "http"
</VirtualHost>
Apache/CGI
"CGI" is supported out of the box and your Mojolicious application will automatically
detect that it is executed as a "CGI" script. Its use in production environments is
discouraged though, because as a result of how "CGI" works, it is very slow and many web
servers are making it exceptionally hard to configure properly. Additionally, many real-
time web features, such as WebSockets, are not available.
ScriptAlias / /home/sri/my_app/script/my_app/
Envoy
Mojolicious applications can be deployed on cloud-native environments that use Envoy
<https://www.envoyproxy.io>, such as with this reverse proxy configuration similar to the
Apache and Nginx ones above.
static_resources:
listeners:
- name: listener_0
address:
socket_address: { address: 0.0.0.0, port_value: 80 }
filter_chains:
- filters:
- name: envoy.filters.network.http_connection_manager
typed_config:
"@type": type.googleapis.com/envoy.extensions.filters.network.http_connection_manager.v3.HttpConnectionManager
codec_type: auto
stat_prefix: index_http
route_config:
name: local_route
virtual_hosts:
- name: service
domains: ["*"]
routes:
- match:
prefix: "/"
route:
cluster: local_service
upgrade_configs:
- upgrade_type: websocket
http_filters:
- name: envoy.filters.http.router
typed_config:
clusters:
- name: local_service
connect_timeout: 0.25s
type: strict_dns
lb_policy: round_robin
load_assignment:
cluster_name: local_service
endpoints:
- lb_endpoints:
- endpoint:
address:
socket_address: { address: mojo, port_value: 8080 }
While this configuration works for simple applications, Envoy's typical use case is for
implementing proxies of applications as a "service mesh" providing advanced filtering,
load balancing, and observability features, such as seen in Istio
<https://istio.io/latest/docs/ops/deployment/architecture/>. For more examples, visit the
Envoy documentation <https://www.envoyproxy.io/docs/envoy/latest/start/start>.
PSGI/Plack
PSGI is an interface between Perl web frameworks and web servers, and Plack is a Perl
module and toolkit that contains PSGI middleware, helpers and adapters to web servers.
PSGI and Plack are inspired by Python's WSGI and Ruby's Rack. Mojolicious applications are
ridiculously simple to deploy with Plack, but be aware that many real-time web features,
such as WebSockets, are not available.
$ plackup ./script/my_app
Plack provides many server and protocol adapters for you to choose from, such as "FCGI",
"uWSGI" and "mod_perl".
$ plackup ./script/my_app -s FCGI -l /tmp/myapp.sock
The "MOJO_REVERSE_PROXY" environment variable can be used to enable proxy support, this
allows Mojolicious to automatically pick up the "X-Forwarded-For" and "X-Forwarded-Proto"
headers.
$ MOJO_REVERSE_PROXY=1 plackup ./script/my_app
If an older server adapter is unable to correctly detect the application home directory,
you can simply use the "MOJO_HOME" environment variable.
$ MOJO_HOME=/home/sri/my_app plackup ./script/my_app
There is no need for a ".psgi" file, just point the server adapter at your application
script, it will automatically act like one if it detects the presence of a "PLACK_ENV"
environment variable.
Plack middleware
Wrapper scripts like "myapp.fcgi" are a great way to separate deployment and application
logic.
#!/usr/bin/env plackup -s FCGI
use Plack::Builder;
builder {
enable 'Deflater';
require './script/my_app';
};
Mojo::Server::PSGI can be used directly to load and customize applications in the wrapper
script.
#!/usr/bin/env plackup -s FCGI
use Mojo::Server::PSGI;
use Plack::Builder;
builder {
enable 'Deflater';
my $server = Mojo::Server::PSGI->new;
$server->load_app('./script/my_app');
$server->app->config(foo => 'bar');
$server->to_psgi_app;
};
But you could even use middleware right in your application.
use Mojolicious::Lite -signatures;
use Plack::Builder;
get '/welcome' => sub ($c) {
$c->render(text => 'Hello Mojo!');
};
builder {
enable 'Deflater';
app->start;
};
Rewriting
Sometimes you might have to deploy your application in a blackbox environment where you
can't just change the server configuration or behind a reverse proxy that passes along
additional information with "X-Forwarded-*" headers. In such cases you can use the hook
"before_dispatch" in Mojolicious to rewrite incoming requests.
# Change scheme if "X-Forwarded-HTTPS" header is set
$app->hook(before_dispatch => sub ($c) {
$c->req->url->base->scheme('https')
if $c->req->headers->header('X-Forwarded-HTTPS');
});
Since reverse proxies generally don't pass along information about path prefixes your
application might be deployed under, rewriting the base path of incoming requests is also
quite common. This allows "url_for" in Mojolicious::Controller for example, to generate
portable URLs based on the current environment.
# Move first part and slash from path to base path in production mode
$app->hook(before_dispatch => sub ($c) {
push @{$c->req->url->base->path->trailing_slash(1)},
shift @{$c->req->url->path->leading_slash(0)};
}) if $app->mode eq 'production';
Mojo::URL objects are very easy to manipulate, just make sure that the URL
("foo/bar?baz=yada"), which represents the routing destination, is always relative to the
base URL ("http://example.com/myapp/"), which represents the deployment location of your
application.
Deployment specific plugins
Deployment specific 3rd party plugins such as Mojolicious::Plugin::SetUserGroup do not
need to be included in your application code. They can also be loaded later on via the
reserved "plugins" value for Mojolicious applications that are using any one of the built-
in configuration plugins Mojolicious::Plugin::Config, Mojolicious::Plugin::JSONConfig or
Mojolicious::Plugin::NotYAMLConfig.
# myapp.conf
{
plugins => [
{SetUserGroup => {user => 'sri', group => 'staff'}}
]
};
Application embedding
From time to time you might want to reuse parts of Mojolicious applications like
configuration files, database connection or helpers for other scripts, with this little
Mojo::Server based mock server you can just embed them.
use Mojo::Server;
# Load application with mock server
my $server = Mojo::Server->new;
my $app = $server->load_app('./myapp.pl');
# Access fully initialized application
say for @{$app->static->paths};
say $app->config->{secret_identity};
say $app->dumper({just => 'a helper test'});
say $app->build_controller->render_to_string(template => 'foo');
The plugin Mojolicious::Plugin::Mount uses this functionality to allow you to combine
multiple applications into one and deploy them together.
use Mojolicious::Lite;
app->config(hypnotoad => {listen => ['http://*:80']});
plugin Mount => {'test1.example.com' => '/home/sri/myapp1.pl'};
plugin Mount => {'test2.example.com' => '/home/sri/myapp2.pl'};
app->start;
Web server embedding
You can also use "one_tick" in Mojo::IOLoop to embed the built-in web server
Mojo::Server::Daemon into alien environments like foreign event loops that for some reason
can't just be integrated with a new reactor backend.
use Mojolicious::Lite;
use Mojo::IOLoop;
use Mojo::Server::Daemon;
# Normal action
get '/' => {text => 'Hello World!'};
# Connect application with web server and start accepting connections
my $daemon = Mojo::Server::Daemon->new(app => app, listen => ['http://*:8080']);
$daemon->start;
# Call "one_tick" repeatedly from the alien environment
Mojo::IOLoop->one_tick while 1;
REAL-TIME WEB
The real-time web is a collection of technologies that include Comet (long polling),
EventSource and WebSockets, which allow content to be pushed to consumers with long-lived
connections as soon as it is generated, instead of relying on the more traditional pull
model. All built-in web servers use non-blocking I/O and are based on the Mojo::IOLoop
event loop, which provides many very powerful features that allow real-time web
applications to scale up to thousands of concurrent client connections.
Backend web services
Since Mojo::UserAgent is also based on the Mojo::IOLoop event loop, it won't block the
built-in web servers when used non-blocking, even for high latency backend web services.
use Mojolicious::Lite -signatures;
# Search MetaCPAN for "mojolicious"
get '/' => sub ($c) {
$c->ua->get('fastapi.metacpan.org/v1/module/_search?q=mojolicious' => sub ($ua, $tx) {
$c->render('metacpan', hits => $tx->result->json->{hits}{hits});
});
};
app->start;
__DATA__
@@ metacpan.html.ep
<!DOCTYPE html>
<html>
<head><title>MetaCPAN results for "mojolicious"</title></head>
<body>
% for my $hit (@$hits) {
<p><%= $hit->{_source}{release} %></p>
% }
</body>
</html>
The callback passed to "get" in Mojo::UserAgent will be executed once the request to the
backend web service has been finished, this is called continuation-passing style.
Synchronizing non-blocking operations
Multiple non-blocking operations, such as concurrent requests, can be easily synchronized
with promises and "all" in Mojo::Promise. You create Mojo::Promise objects manually or use
methods like "get_p" in Mojo::UserAgent that create them for you.
use Mojolicious::Lite -signatures;
use Mojo::Promise;
use Mojo::URL;
# Search MetaCPAN for "mojo" and "minion"
get '/' => sub ($c) {
# Create two promises
my $url = Mojo::URL->new('http://fastapi.metacpan.org/v1/module/_search');
my $mojo = $c->ua->get_p($url->clone->query({q => 'mojo'}));
my $minion = $c->ua->get_p($url->clone->query({q => 'minion'}));
# Render a response once both promises have been resolved
Mojo::Promise->all($mojo, $minion)->then(sub ($mojo, $minion) {
$c->render(json => {
mojo => $mojo->[0]->result->json('/hits/hits/0/_source/release'),
minion => $minion->[0]->result->json('/hits/hits/0/_source/release')
});
})->catch(sub ($err) {
$c->reply->exception($err);
})->wait;
};
app->start;
To create promises manually you just wrap your continuation-passing style APIs in
functions that return promises. Here's an example for how "get_p" in Mojo::UserAgent
works internally.
use Mojo::UserAgent;
use Mojo::Promise;
# Wrap a user agent method with a promise
my $ua = Mojo::UserAgent->new;
sub get_p {
my $promise = Mojo::Promise->new;
$ua->get(@_ => sub ($ua, $tx) {
my $err = $tx->error;
$promise->resolve($tx) if !$err || $err->{code};
$promise->reject($err->{message});
});
return $promise;
}
# Use our new promise generating function
get_p('https://mojolicious.org')->then(sub ($tx) {
say $tx->result->dom->at('title')->text;
})->wait;
Promises have three states, they start out as "pending" and you call "resolve" in
Mojo::Promise to transition them to "fulfilled", or "reject" in Mojo::Promise to
transition them to "rejected".
async/await
And if you have Future::AsyncAwait installed you can make using promises even easier. The
"async" and "await" keywords are enabled with the "-async_await" flag of Mojo::Base, and
make the use of closures with promises completely optional.
use Mojo::Base -strict, -async_await;
The "async" keyword is placed before the "sub" keyword, and means that this function
always returns a promise. Returned values that are not Mojo::Promise objects will be
wrapped in a resolved promise automatically. And if an exception gets thrown in the
function it will result in a rejected promise.
use Mojo::Base -strict, -async_await;
async sub hello_p {
return 'Hello Mojo!';
}
hello_p()->then(sub { say @_ })->wait;
The "await" keyword on the other hand makes Perl wait for the promise to be settled. It
then returns the fulfillment values or throws an exception with the rejection reason.
While waiting, the event loop is free to perform other tasks however, so no resources are
wasted.
use Mojo::Base -strict, -signatures, -async_await;
use Mojo::UserAgent;
use Mojo::URL;
my $ua = Mojo::UserAgent->new;
# Search MetaCPAN non-blocking for multiple terms sequentially
async sub search_cpan_p ($terms) {
my $cpan = Mojo::URL->new('http://fastapi.metacpan.org/v1/module/_search');
my @urls = map { $cpan->clone->query(q => $_) } @$terms;
for my $url (@urls) {
my $tx = await $ua->get_p($url);
say $tx->result->json('/hits/hits/0/_source/release');
}
}
search_cpan_p(['mojo', 'minion'])->wait;
The loop above performs all requests sequentially, awaiting a result before sending the
next request. But you can also perform those requests concurrently instead, by using
methods like "all" in Mojo::Promise to combine multiple promises before awaiting the
results.
use Mojo::Base -strict, -signatures, -async_await;
use Mojo::Promise;
use Mojo::UserAgent;
use Mojo::URL;
my $ua = Mojo::UserAgent->new;
# Search MetaCPAN non-blocking for multiple terms concurrently
async sub search_cpan_p ($terms) {
my $cpan = Mojo::URL->new('http://fastapi.metacpan.org/v1/module/_search');
my @urls = map { $cpan->clone->query(q => $_) } @$terms;
my @promises = map { $ua->get_p($_) } @urls;
my @results = await Mojo::Promise->all(@promises);
for my $result (@results) {
say $result->[0]->result->json('/hits/hits/0/_source/release');
}
}
search_cpan_p(['mojo', 'minion'])->wait;
All of this also means that you can use normal Perl exception handling again. Even many
3rd party exception handling modules from CPAN work just fine.
use Mojo::Base -strict, -async_await;
use Mojo::Promise;
# Catch a non-blocking exception
async sub hello_p {
eval { await Mojo::Promise->reject('This is an exception') };
if (my $err = $@) { warn "Error: $err" }
}
hello_p()->wait;
And it works just the same in Mojolicious and Mojolicious::Lite applications. Just declare
your actions with the "async" keyword and use "await" to wait for promises to be
"fulfilled" or "rejected".
use Mojolicious::Lite -signatures, -async_await;
# Request HTML titles from two sites non-blocking
get '/' => async sub ($c) {
my $mojo_tx = await $c->ua->get_p('https://mojolicious.org');
my $mojo_title = $mojo_tx->result->dom->at('title')->text;
my $cpan_tx = await $c->ua->get_p('https://metacpan.org');
my $cpan_title = $cpan_tx->result->dom->at('title')->text;
$c->render(json => {mojo => $mojo_title, cpan => $cpan_title});
};
app->start;
Promises returned by actions will automatically get the default Mojolicious exception
handler attached. Making it much harder to ever miss a non-blocking exception again, even
if you forgot to handle it yourself.
Timers
Timers, another primary feature of the event loop, are created with "timer" in
Mojo::IOLoop and can, for example, be used to delay rendering of a response, and unlike
"sleep", won't block any other requests that might be processed concurrently.
use Mojolicious::Lite -signatures;
use Mojo::IOLoop;
# Wait 3 seconds before rendering a response
get '/' => sub ($c) {
Mojo::IOLoop->timer(3 => sub ($ioloop) {
$c->render(text => 'Delayed by 3 seconds!');
});
};
app->start;
Recurring timers created with "recurring" in Mojo::IOLoop are slightly more powerful, but
need to be stopped manually, or they would just keep getting emitted.
use Mojolicious::Lite -signatures;
use Mojo::IOLoop;
# Count to 5 in 1 second steps
get '/' => sub ($c) {
# Start recurring timer
my $i = 1;
my $id = Mojo::IOLoop->recurring(1 => sub ($ioloop) {
$c->write_chunk($i);
$c->finish if $i++ == 5;
});
# Stop recurring timer
$c->on(finish => sub ($c) { Mojo::IOLoop->remove($id) });
};
app->start;
Timers are not tied to a specific request or connection, and can even be created at
startup time.
use Mojolicious::Lite -signatures;
use Mojo::IOLoop;
# Check title in the background every 10 seconds
my $title = 'Got no title yet.';
Mojo::IOLoop->recurring(10 => sub ($ioloop) {
app->ua->get('https://mojolicious.org' => sub ($ua, $tx) {
$title = $tx->result->dom->at('title')->text;
});
});
# Show current title
get '/' => sub ($c) {
$c->render(json => {title => $title});
};
app->start;
Just remember that all these non-blocking operations are processed cooperatively, so your
callbacks shouldn't block for too long.
Subprocesses
You can also use subprocesses, created with "subprocess" in Mojo::IOLoop, to perform
computationally expensive operations without blocking the event loop.
use Mojolicious::Lite -signatures;
use Mojo::IOLoop;
# Operation that would block the event loop for 5 seconds
get '/' => sub ($c) {
Mojo::IOLoop->subprocess->run_p(sub {
sleep 5;
return '♥', 'Mojolicious';
})->then(sub (@results) {
$c->render(text => "I $results[0] $results[1]!");
})->catch(sub ($err) {
$c->reply->exception($err);
});
};
app->start;
The callback passed to "run_p" in Mojo::IOLoop::Subprocess will be executed in a child
process, without blocking the event loop of the parent process. The results of the
callback will then be shared between both processes, and the promise fulfilled or rejected
in the parent process.
Exceptions in non-blocking operations
Since timers and other non-blocking operations are running solely in the event loop,
outside of the application, exceptions that get thrown in callbacks can't get caught and
handled automatically. But you can handle them manually by subscribing to the event
"error" in Mojo::Reactor or catching them inside the callback.
use Mojolicious::Lite -signatures;
use Mojo::IOLoop;
# Forward error messages to the application log
Mojo::IOLoop->singleton->reactor->on(error => sub ($reactor, $err) {
app->log->error($err);
});
# Exception only gets logged (and connection times out)
get '/connection_times_out' => sub ($c) {
Mojo::IOLoop->timer(2 => sub ($ioloop) {
die 'This request will not be getting a response';
});
};
# Exception gets caught and handled
get '/catch_exception' => sub ($c) {
Mojo::IOLoop->timer(2 => sub ($ioloop) {
eval { die 'This request will be getting a response' };
$c->reply->exception($@) if $@;
});
};
app->start;
A default subscriber that turns all errors into warnings will usually be added by
Mojo::IOLoop as a fallback.
Mojo::IOLoop->singleton->reactor->unsubscribe('error');
During development or for applications where crashing is simply preferable, you can also
make every exception that gets thrown in a callback fatal by removing all of its
subscribers.
WebSocket web service
The WebSocket protocol offers full bi-directional low-latency communication channels
between clients and servers. Receive messages just by subscribing to events such as
"message" in Mojo::Transaction::WebSocket with "on" in Mojolicious::Controller and return
them with "send" in Mojolicious::Controller.
use Mojolicious::Lite -signatures;
# Template with browser-side code
get '/' => 'index';
# WebSocket echo service
websocket '/echo' => sub ($c) {
# Opened
$c->app->log->debug('WebSocket opened');
# Increase inactivity timeout for connection a bit
$c->inactivity_timeout(300);
# Incoming message
$c->on(message => sub ($c, $msg) {
$c->send("echo: $msg");
});
# Closed
$c->on(finish => sub ($c, $code, $reason = undef) {
$c->app->log->debug("WebSocket closed with status $code");
});
};
app->start;
__DATA__
@@ index.html.ep
<!DOCTYPE html>
<html>
<head><title>Echo</title></head>
<body>
<script>
const ws = new WebSocket('<%= url_for('echo')->to_abs %>');
// Incoming messages
ws.onmessage = function (event) {
document.body.innerHTML += event.data + '<br/>';
};
// Outgoing messages
ws.onopen = function (event) {
window.setInterval(function () { ws.send('Hello Mojo!') }, 1000);
};
</script>
</body>
</html>
The event "finish" in Mojo::Transaction::WebSocket will be emitted right after the
WebSocket connection has been closed.
$c->tx->with_compression;
You can activate "permessage-deflate" compression with "with_compression" in
Mojo::Transaction::WebSocket, this can result in much better performance, but also
increases memory usage by up to 300KiB per connection.
my $proto = $c->tx->with_protocols('v2.proto', 'v1.proto');
You can also use "with_protocols" in Mojo::Transaction::WebSocket to negotiate a
subprotocol.
EventSource web service
EventSource is a special form of long polling where you can use "write" in
Mojolicious::Controller to directly send DOM events from servers to clients. It is uni-
directional, that means you will have to use Ajax requests for sending data from clients
to servers, the advantage however is low infrastructure requirements, since it reuses the
HTTP protocol for transport.
use Mojolicious::Lite -signatures;
# Template with browser-side code
get '/' => 'index';
# EventSource for log messages
get '/events' => sub ($c) {
# Increase inactivity timeout for connection a bit
$c->inactivity_timeout(300);
# Change content type and finalize response headers
$c->res->headers->content_type('text/event-stream');
$c->write;
# Subscribe to "message" event and forward "log" events to browser
my $cb = $c->app->log->on(message => sub ($log, $level, @lines) {
$c->write("event:log\ndata: [$level] @lines\n\n");
});
# Unsubscribe from "message" event again once we are done
$c->on(finish => sub ($c) {
$c->app->log->unsubscribe(message => $cb);
});
};
app->start;
__DATA__
@@ index.html.ep
<!DOCTYPE html>
<html>
<head><title>LiveLog</title></head>
<body>
<script>
const events = new EventSource('<%= url_for 'events' %>');
// Subscribe to "log" event
events.addEventListener('log', function (event) {
document.body.innerHTML += event.data + '<br/>';
}, false);
</script>
</body>
</html>
The event "message" in Mojo::Log will be emitted for every new log message and the event
"finish" in Mojo::Transaction right after the transaction has been finished.
Streaming multipart uploads
Mojolicious contains a very sophisticated event system based on Mojo::EventEmitter, with
ready-to-use events on almost all layers, and which can be combined to solve some of the
hardest problems in web development.
use Mojolicious::Lite -signatures;
use Scalar::Util qw(weaken);
# Intercept multipart uploads and log each chunk received
hook after_build_tx => sub ($tx, $app) {
# Subscribe to "upgrade" event to identify multipart uploads
weaken $tx;
$tx->req->content->on(upgrade => sub ($single, $multi) {
return unless $tx->req->url->path->contains('/upload');
# Subscribe to "part" event to find the right one
$multi->on(part => sub ($multi, $single) {
# Subscribe to "body" event of part to make sure we have all headers
$single->on(body => sub ($single) {
# Make sure we have the right part and replace "read" event
return unless $single->headers->content_disposition =~ /example/;
$single->unsubscribe('read')->on(read => sub ($single, $bytes) {
# Log size of every chunk we receive
$app->log->debug(length($bytes) . ' bytes uploaded');
});
});
});
});
};
# Upload form in DATA section
get '/' => 'index';
# Streaming multipart upload
post '/upload' => {text => 'Upload was successful.'};
app->start;
__DATA__
@@ index.html.ep
<!DOCTYPE html>
<html>
<head><title>Streaming multipart upload</title></head>
<body>
%= form_for upload => (enctype => 'multipart/form-data') => begin
%= file_field 'example'
%= submit_button 'Upload'
% end
</body>
</html>
More event loops
Internally, the Mojo::IOLoop event loop can use multiple reactor backends, EV for example,
will be automatically used if possible. Which in turn allows other event loops like
AnyEvent to just work.
use Mojolicious::Lite -signatures;
use EV;
use AnyEvent;
# Wait 3 seconds before rendering a response
get '/' => sub ($c) {
my $w;
$w = AE::timer 3, 0, sub {
$c->render(text => 'Delayed by 3 seconds!');
undef $w;
};
};
app->start;
USER AGENT
When we say Mojolicious is a web framework we actually mean it, with Mojo::UserAgent
there's a full featured HTTP and WebSocket user agent built right in.
REST web services
Requests can be performed very comfortably with methods like "get" in Mojo::UserAgent, and
always result in a Mojo::Transaction::HTTP object, which has many useful attributes and
methods. You can check for connection errors with "result" in Mojo::Transaction, or access
HTTP request and response information directly through "req" in Mojo::Transaction and
"res" in Mojo::Transaction.
use Mojo::UserAgent;
# Request a resource and make sure there were no connection errors
my $ua = Mojo::UserAgent->new;
my $tx = $ua->get('https://docs.mojolicious.org/Mojo' => {Accept => 'text/plain'});
my $res = $tx->result;
# Decide what to do with its representation
if ($res->is_success) { say $res->body }
elsif ($res->is_error) { say $res->message }
elsif ($res->code == 301) { say $res->headers->location }
else { say 'Whatever...' }
While methods like "is_success" in Mojo::Message::Response and "is_error" in
Mojo::Message::Response serve as building blocks for more sophisticated REST clients.
Web scraping
Scraping information from websites has never been this much fun before. The built-in
HTML/XML parser Mojo::DOM is accessible through "dom" in Mojo::Message and supports all
CSS selectors that make sense for a standalone parser, it can be a very powerful tool
especially for testing web application.
use Mojo::UserAgent;
# Fetch website
my $ua = Mojo::UserAgent->new;
my $res = $ua->get('https://docs.mojolicious.org')->result;
# Extract title
say 'Title: ', $res->dom->at('head > title')->text;
# Extract headings
$res->dom('h1, h2, h3')->each(sub ($dom, $i) {
say 'Heading: ', $dom->all_text;
});
# Visit all nodes recursively to extract more than just text
for my $n ($res->dom->descendant_nodes->each) {
# Text or CDATA node
print $n->content if $n->type eq 'text' || $n->type eq 'cdata';
# Also include alternate text for images
print $n->{alt} if $n->type eq 'tag' && $n->tag eq 'img';
}
For a full list of available CSS selectors see "SELECTORS" in Mojo::DOM::CSS.
JSON web services
Most web services these days are based on the JSON data-interchange format. That's why
Mojolicious comes with the possibly fastest pure-Perl implementation Mojo::JSON built
right in, which is accessible through "json" in Mojo::Message.
use Mojo::UserAgent;
use Mojo::URL;
# Fresh user agent
my $ua = Mojo::UserAgent->new;
# Search MetaCPAN for "mojolicious" and list latest releases
my $url = Mojo::URL->new('http://fastapi.metacpan.org/v1/release/_search');
$url->query({q => 'mojolicious', sort => 'date:desc'});
for my $hit (@{$ua->get($url)->result->json->{hits}{hits}}) {
say "$hit->{_source}{name} ($hit->{_source}{author})";
}
Basic authentication
You can just add username and password to the URL, an "Authorization" header will be
automatically generated.
use Mojo::UserAgent;
my $ua = Mojo::UserAgent->new;
say $ua->get('https://sri:secret@example.com/hideout')->result->body;
If you're using Mojo::URL to build the URL, be aware that the userinfo part will not be
included if the object is stringified. You'll have to pass the object itself to
Mojo::UserAgent or use "to_unsafe_string" in Mojo::URL.
use Mojo::UserAgent;
use Mojo::URL;
my $ua = Mojo::UserAgent->new;
my $url = Mojo::URL->new('https://example.com/hideout')->userinfo('sri:secret');
say $ua->get($url)->result->body;
Decorating follow-up requests
Mojo::UserAgent can automatically follow redirects, the event "start" in Mojo::UserAgent
allows you direct access to each transaction right after they have been initialized and
before a connection gets associated with them.
use Mojo::UserAgent;
# User agent following up to 10 redirects
my $ua = Mojo::UserAgent->new(max_redirects => 10);
# Add a witty header to every request
$ua->on(start => sub ($ua, $tx) {
$tx->req->headers->header('X-Bender' => 'Bite my shiny metal ass!');
say 'Request: ', $tx->req->url->clone->to_abs;
});
# Request that will most likely get redirected
say 'Title: ', $ua->get('google.com')->result->dom->at('head > title')->text;
This even works for proxy "CONNECT" requests.
Content generators
Content generators can be registered with "add_generator" in Mojo::UserAgent::Transactor
to generate the same type of content repeatedly for multiple requests.
use Mojo::UserAgent;
use Mojo::Asset::File;
# Add "stream" generator
my $ua = Mojo::UserAgent->new;
$ua->transactor->add_generator(stream => sub ($transactor, $tx, $path) {
$tx->req->content->asset(Mojo::Asset::File->new(path => $path));
});
# Send multiple files streaming via PUT and POST
$ua->put('http://example.com/upload' => stream => '/home/sri/mojo.png');
$ua->post('http://example.com/upload' => stream => '/home/sri/minion.png');
The "json", "form" and "multipart" content generators are always available.
use Mojo::UserAgent;
# Send "application/json" content via PATCH
my $ua = Mojo::UserAgent->new;
my $tx = $ua->patch('http://api.example.com' => json => {foo => 'bar'});
# Send query parameters via GET
my $tx2 = $ua->get('search.example.com' => form => {q => 'test'});
# Send "application/x-www-form-urlencoded" content via POST
my $tx3 = $ua->post('http://search.example.com' => form => {q => 'test'});
# Send "multipart/form-data" content via PUT
my $tx4 = $ua->put('upload.example.com' => form => {test => {content => 'Hello World!'}});
# Send custom multipart content via PUT
my $tx5 = $ua->put('api.example.com' => multipart => ['Hello', 'World!']);
For more information about available content generators see also "tx" in
Mojo::UserAgent::Transactor.
Large file downloads
When downloading large files with Mojo::UserAgent you don't have to worry about memory
usage at all, because it will automatically stream everything above 250KiB into a
temporary file, which can then be moved into a permanent file with "save_to" in
Mojo::Message.
use Mojo::UserAgent;
# Fetch the latest Mojolicious tarball
my $ua = Mojo::UserAgent->new(max_redirects => 5);
my $tx = $ua->get('https://www.github.com/mojolicious/mojo/tarball/main');
$tx->result->save_to('mojo.tar.gz');
To protect you from excessively large files there is also a limit of 2GiB by default,
which you can tweak with the attribute "max_response_size" in Mojo::UserAgent.
# Increase limit to 10GiB
$ua->max_response_size(10737418240);
Large file upload
Uploading a large file is even easier.
use Mojo::UserAgent;
# Upload file via POST and "multipart/form-data"
my $ua = Mojo::UserAgent->new;
$ua->post('example.com/upload' => form => {image => {file => '/home/sri/hello.png'}});
And once again you don't have to worry about memory usage, all data will be streamed
directly from the file.
Streaming response
Receiving a streaming response can be really tricky in most HTTP clients, but
Mojo::UserAgent makes it actually easy.
use Mojo::UserAgent;
# Accept responses of indefinite size
my $ua = Mojo::UserAgent->new(max_response_size => 0);
# Build a normal transaction
my $tx = $ua->build_tx(GET => 'http://example.com');
# Replace "read" events to disable default content parser
$tx->res->content->unsubscribe('read')->on(read => sub ($content, $bytes) {
say "Streaming: $bytes";
});
# Process transaction
$tx = $ua->start($tx);
The event "read" in Mojo::Content will be emitted for every chunk of data that is
received, even chunked transfer encoding and gzip content encoding will be handled
transparently if necessary.
Streaming request
Sending a streaming request is almost just as easy.
use Mojo::UserAgent;
# Build a normal transaction
my $ua = Mojo::UserAgent->new;
my $tx = $ua->build_tx(GET => 'http://example.com');
# Prepare body
my $body = 'Hello World!';
$tx->req->headers->content_length(length $body);
# Start writing directly with a drain callback
my $drain = sub ($content) {
my $chunk = substr $body, 0, 1, '';
$content->write($chunk, length $body ? __SUB__ : undef);
};
$tx->req->content->$drain;
# Process transaction
$tx = $ua->start($tx);
The drain callback passed to "write" in Mojo::Content will be executed whenever the entire
previous chunk of data has actually been written.
Non-blocking
Mojo::UserAgent has been designed from the ground up to be non-blocking, the whole
blocking API is just a simple convenience wrapper. Especially for high latency tasks like
web crawling this can be extremely useful, because you can keep many concurrent
connections active at the same time.
use Mojo::UserAgent;
use Mojo::IOLoop;
# Concurrent non-blocking requests
my $ua = Mojo::UserAgent->new;
$ua->get('https://metacpan.org/search?q=mojo' => sub ($ua, $mojo) {
say $mojo->result->dom->at('title')->text;
});
$ua->get('https://metacpan.org/search?q=minion' => sub ($ua, $minion) {
say $minion->result->dom->at('title')->text;
});
# Start event loop if necessary
Mojo::IOLoop->start unless Mojo::IOLoop->is_running;
But don't try to open too many connections to one server at the same time, it might get
overwhelmed. Better use a queue to process requests in smaller batches.
use Mojo::Promise;
use Mojo::UserAgent;
my @urls = (
'https://docs.mojolicious.org/Mojo/DOM', 'https://docs.mojolicious.org/Mojo',
'https://docs.mojolicious.org/Mojo/File', 'https://docs.mojolicious.org/Mojo/URL'
);
# User agent with a custom name, following up to 5 redirects
my $ua = Mojo::UserAgent->new(max_redirects => 5);
$ua->transactor->name('MyParallelCrawler 1.0');
# Use a promise to keep the event loop running until we are done
my $promise = Mojo::Promise->new;
my $count = 0;
my $fetch = sub {
# Stop if there are no more URLs
return unless my $url = shift @urls;
# Fetch the next title
$ua->get($url => sub ($ua, $tx) {
say "$url: ", $tx->result->dom->at('title')->text;
# Next request
__SUB__->();
$promise->resolve if --$count == 0;
});
$count++;
};
# Process two requests at a time
$fetch->() for 1 .. 2;
$promise->wait;
It is also strongly recommended to respect every sites "robots.txt" file as well as terms
of service, and to wait a little before reopening connections to the same host, or the
operators might be forced to block your access.
Concurrent blocking requests
You might have seen "wait" in Mojo::Promise already in some examples above. It is used to
make non-blocking operations portable, allowing them to work inside an already running
event loop or start one on demand.
use Mojo::UserAgent;
use Mojo::Promise;
# Synchronize non-blocking requests with promises
my $ua = Mojo::UserAgent->new;
my $mojo_promise = $ua->get_p('https://metacpan.org/search?q=mojo');
my $minion_promise = $ua->get_p('https://metacpan.org/search?q=minion');
Mojo::Promise->all($mojo_promise, $minion_promise)->then(sub ($mojo, $minion) {
say $mojo->[0]->result->dom->at('title')->text;
say $minion->[0]->result->dom->at('title')->text;
})->wait;
WebSockets
WebSockets are not just for the server-side, you can use "websocket_p" in Mojo::UserAgent
to open new connections, which are always non-blocking. The WebSocket handshake uses HTTP,
and is a normal "GET" request with a few additional headers. It can even contain cookies,
and is followed by a 101 response from the server, notifying our user agent that the
connection has been established and it can start using the bi-directional WebSocket
protocol.
use Mojo::UserAgent;
use Mojo::Promise;
# Open WebSocket to echo service
my $ua = Mojo::UserAgent->new;
$ua->websocket_p('wss://ws.postman-echo.com/raw')->then(sub ($tx) {
# Prepare a followup promise so we can wait for messages
my $promise = Mojo::Promise->new;
# Wait for WebSocket to be closed
$tx->on(finish => sub ($tx, $code, $reason) {
say "WebSocket closed with status $code.";
$promise->resolve;
});
# Close WebSocket after receiving one message
$tx->on(message => sub ($tx, $msg) {
say "WebSocket message: $msg";
$tx->finish;
});
# Send a message to the server
$tx->send('Hi!');
# Insert a new promise into the promise chain
return $promise;
})->catch(sub ($err) {
# Handle failed WebSocket handshakes and other exceptions
warn "WebSocket error: $err";
})->wait;
UNIX domain sockets
Not just TCP/IP sockets are supported, but also UNIX domain sockets, which can have
significant security and performance benefits when used for inter-process communication.
Instead of "http://" and "ws://" you can use the "http+unix://" and "ws+unix://" schemes,
and pass along a percent encoded path ("/" becomes %2F) instead of a hostname.
use Mojo::UserAgent;
use Mojo::Promise;
# GET request via UNIX domain socket "/tmp/foo.sock"
my $ua = Mojo::UserAgent->new;
say $ua->get('http+unix://%2Ftmp%2Ffoo.sock/index.html')->result->body;
# GET request with HOST header via UNIX domain socket "/tmp/bar.sock"
my $tx = $ua->get('http+unix://%2Ftmp%2Fbar.sock' => {Host => 'example.com'});
say $tx->result->body;
# WebSocket connection via UNIX domain socket "/tmp/baz.sock"
$ua->websocket_p('ws+unix://%2Ftmp%2Fbaz.sock/echo')->then(sub ($tx) {
my $promise = Mojo::Promise->new;
$tx->on(finish => sub ($tx) { $promise->resolve });
$tx->on(message => sub ($tx, $msg) {
say "WebSocket message: $msg";
$tx->finish;
});
$tx->send('Hi!');
return $promise;
})->catch(sub ($err) {
warn "WebSocket error: $err";
})->wait;
You can set the "Host" header manually to pass along a hostname.
Command line
Don't you hate checking huge HTML files from the command line? Thanks to the command
Mojolicious::Command::get that is about to change. You can just pick the parts that
actually matter with the CSS selectors from Mojo::DOM and JSON Pointers from
Mojo::JSON::Pointer.
$ mojo get https://mojolicious.org 'head > title'
How about a list of all id attributes?
$ mojo get https://mojolicious.org '*' attr id
Or the text content of all heading tags?
$ mojo get https://mojolicious.org 'h1, h2, h3' text
Maybe just the text of the third heading?
$ mojo get https://mojolicious.org 'h1, h2, h3' 3 text
You can also extract all text from nested child elements.
$ mojo get https://mojolicious.org '#mojobar' all
The request can be customized as well.
$ mojo get -M POST -H 'X-Bender: Bite my shiny metal ass!' http://google.com
Store response data by redirecting "STDOUT".
$ mojo get mojolicious.org > example.html
Pass request data by redirecting "STDIN".
$ mojo get -M PUT mojolicious.org < example.html
Or use the output of another program.
$ echo 'Hello World' | mojo get -M PUT https://mojolicious.org
Submit forms as "application/x-www-form-urlencoded" content.
$ mojo get -M POST -f 'q=Mojo' -f 'size=5' https://metacpan.org/search
And upload files as "multipart/form-data" content.
$ mojo get -M POST -f 'upload=@example.html' mojolicious.org
You can follow redirects and view the headers for all messages.
$ mojo get -r -v http://google.com 'head > title'
Extract just the information you really need from JSON data structures.
$ mojo get https://fastapi.metacpan.org/v1/author/SRI /name
This can be an invaluable tool for testing your applications.
$ ./myapp.pl get /welcome 'head > title'
One-liners
For quick hacks and especially testing, ojo one-liners are also a great choice.
$ perl -Mojo -E 'say g("mojolicious.org")->dom->at("title")->text'
APPLICATIONS
Fun Mojolicious application hacks for all occasions.
Basic authentication
Basic authentication data will be automatically extracted from the "Authorization" header.
use Mojolicious::Lite -signatures;
use Mojo::Util qw(secure_compare);
get '/' => sub ($c) {
# Check for username "Bender" and password "rocks"
return $c->render(text => 'Hello Bender!') if secure_compare $c->req->url->to_abs->userinfo, 'Bender:rocks';
# Require authentication
$c->res->headers->www_authenticate('Basic');
$c->render(text => 'Authentication required!', status => 401);
};
app->start;
This can be combined with TLS for a secure authentication mechanism.
$ ./myapp.pl daemon -l 'https://*:3000?cert=./server.crt&key=./server.key'
Adding a configuration file
Adding a configuration file to your application is as easy as adding a file to its home
directory and loading the plugin Mojolicious::Plugin::Config. The default name is based on
the value of "moniker" in Mojolicious ("myapp"), appended with a ".conf" extension
("myapp.conf").
$ mkdir myapp
$ cd myapp
$ touch myapp.pl
$ chmod 744 myapp.pl
$ echo '{name => "my Mojolicious application"};' > myapp.conf
Configuration files themselves are just Perl scripts that return a hash reference with
configuration settings of your choice. All those settings are then available through the
method "config" in Mojolicious and the helper "config" in
Mojolicious::Plugin::DefaultHelpers.
use Mojolicious::Lite;
plugin 'Config';
my $name = app->config('name');
app->log->debug("Welcome to $name");
get '/' => 'with_config';
app->start;
__DATA__
@@ with_config.html.ep
<!DOCTYPE html>
<html>
<head><title><%= config 'name' %></title></head>
<body>Welcome to <%= config 'name' %></body>
</html>
Alternatively you can also use configuration files in the JSON format with
Mojolicious::Plugin::JSONConfig.
Adding a plugin to your application
To organize your code better and to prevent helpers from cluttering your application, you
can use application specific plugins.
$ mkdir -p lib/MyApp/Plugin
$ touch lib/MyApp/Plugin/MyHelpers.pm
They work just like normal plugins and are also subclasses of Mojolicious::Plugin. Nested
helpers with a prefix based on the plugin name are an easy way to avoid conflicts.
package MyApp::Plugin::MyHelpers;
use Mojo::Base 'Mojolicious::Plugin', -signatures;
sub register ($self, $app, $conf) {
$app->helper('my_helpers.render_with_header' => sub ($c, @args) {
$c->res->headers->header('X-Mojo' => 'I <3 Mojolicious!');
$c->render(@args);
});
}
1;
You can have as many application specific plugins as you like, the only difference to
normal plugins is that you load them using their full class name.
use Mojolicious::Lite -signatures;
use lib qw(lib);
plugin 'MyApp::Plugin::MyHelpers';
get '/' => sub ($c) {
$c->my_helpers->render_with_header(text => 'I ♥ Mojolicious!');
};
app->start;
Of course these plugins can contain more than just helpers, take a look at "PLUGINS" in
Mojolicious::Plugins for a few ideas.
Adding commands to Mojolicious
By now you've probably used many of the built-in commands described in
Mojolicious::Commands, but did you know that you can just add new ones and that they will
be picked up automatically by the command line interface if they are placed in a directory
from @INC?
package Mojolicious::Command::spy;
use Mojo::Base 'Mojolicious::Command', -signatures;
has description => 'Spy on application';
has usage => "Usage: APPLICATION spy [TARGET]\n";
sub run ($self, @args) {
# Leak secret passphrases
if ($args[0] eq 'secrets') { say for @{$self->app->secrets} }
# Leak mode
elsif ($args[0] eq 'mode') { say $self->app->mode }
}
1;
Command line arguments are passed right through and there are many useful attributes and
methods in Mojolicious::Command that you can use or overload.
$ mojo spy secrets
HelloWorld
$ ./script/myapp spy secrets
secr3t
And to make your commands application specific, just add a custom namespace to
"namespaces" in Mojolicious::Commands and use a class name like "MyApp::Command::spy"
instead of "Mojolicious::Command::spy".
# Application
package MyApp;
use Mojo::Base 'Mojolicious', -signatures;
sub startup ($self) {
# Add another namespace to load commands from
push @{$self->commands->namespaces}, 'MyApp::Command';
}
1;
The options "-h"/"--help", "--home" and "-m"/"--mode" are handled automatically by
Mojolicious::Commands and are shared by all commands.
$ ./script/myapp spy -m production mode
production
For a full list of shared options see "SYNOPSIS" in Mojolicious::Commands.
Running code against your application
Ever thought about running a quick one-liner against your Mojolicious application to test
something? Thanks to the command Mojolicious::Command::eval you can do just that, the
application object itself can be accessed via "app".
$ mojo generate lite-app myapp.pl
$ ./myapp.pl eval 'say for @{app->static->paths}'
$ ./myapp.pl eval 'say for sort keys %{app->renderer->helpers}'
The "verbose" options will automatically print the return value or returned data structure
to "STDOUT".
$ ./myapp.pl eval -v 'app->static->paths->[0]'
$ ./myapp.pl eval -V 'app->static->paths'
Making your application installable
Ever thought about releasing your Mojolicious application to CPAN? It's actually much
easier than you might think.
$ mojo generate app MyApp
$ cd my_app
$ mv public lib/MyApp/
$ mv templates lib/MyApp/
The trick is to move the "public" and "templates" directories so they can get
automatically installed with the modules. Additionally author commands from the
"Mojolicious::Command::Author" namespace are not usually wanted by an installed
application so they can be excluded.
# Application
package MyApp;
use Mojo::Base 'Mojolicious', -signatures;
use Mojo::File qw(curfile);
use Mojo::Home;
# Every CPAN module needs a version
our $VERSION = '1.0';
sub startup ($self) {
# Switch to installable home directory
$self->home(Mojo::Home->new(curfile->sibling('MyApp')));
# Switch to installable "public" directory
$self->static->paths->[0] = $self->home->child('public');
# Switch to installable "templates" directory
$self->renderer->paths->[0] = $self->home->child('templates');
# Exclude author commands
$self->commands->namespaces(['Mojolicious::Commands']);
my $r = $self->routes;
$r->get('/welcome')->to('example#welcome');
}
1;
Finally there is just one small change to be made to the application script. The shebang
line becomes the recommended "#!perl", which the toolchain can rewrite to the proper
shebang during installation.
#!perl
use strict;
use warnings;
use Mojo::File qw(curfile);
use lib curfile->dirname->sibling('lib')->to_string;
use Mojolicious::Commands;
# Start command line interface for application
Mojolicious::Commands->start_app('MyApp');
That's really everything, now you can package your application like any other CPAN module.
$ ./script/my_app generate makefile
$ perl Makefile.PL
$ make test
$ make manifest
$ make dist
And if you have a PAUSE account (which can be requested at <http://pause.perl.org>) even
upload it.
$ mojo cpanify -u USER -p PASS MyApp-0.01.tar.gz
Proxy
While every Mojolicious application has the built-in user agent "ua" in
Mojolicious::Plugin::DefaultHelpers for you to perform requests to backend web services,
this is not always the most efficient solution. The specialized proxy helpers
"proxy->get_p" in Mojolicious::Plugin::DefaultHelpers and "proxy->start_p" in
Mojolicious::Plugin::DefaultHelpers can stream response content straight to the client, as
soon as a new chunk of data is received from the backend web service. Additionally they
will take care of removing hop-by-hop headers and protect you automatically from
backpressure issues. Which can happen in situations where the connection to the backend
web service is faster than the connection to the client and data forwarding needs to be
throttled. And the best of all, everything happens non-blocking, that means your web
server can process other requests concurrently while waiting for I/O.
use Mojolicious::Lite -signatures;
# Just forward the response
get '/' => sub ($c) {
$c->proxy->get_p('https://mojolicious.org')->catch(sub ($err) {
$c->log->error("Proxy error: $err");
$c->render(text => 'Could not connect to backend web service!', status => 400);
});
};
# Forward response and customize a few things
get '/*docs' => sub ($c) {
# Custom request
my $tx = $c->ua->build_tx(GET => 'https://docs.mojolicious.org');
my $docs = $c->param('docs');
$tx->req->url->path("/$docs");
$tx->req->headers->user_agent('MojoProxy/1.0');
# Start non-blocking request
$c->proxy->start_p($tx)->catch(sub ($err) {
$c->log->error("Proxy error: $err");
$c->render(text => 'Could not connect to backend web service!', status => 400);
});
# Custom response
$tx->res->content->once(body => sub ($content) {
$c->res->headers->server('MojoProxy/1.0');
});
};
app->start;
All proxy helpers return a Mojo::Promise object, which should be used to handle connection
errors to backend web services gracefully. And if you ever need to forward all headers
from the client to the backend web service, make sure to use "dehop" in Mojo::Headers to
remove all hop-by-hop headers.
# Clone and modify request headers
my $headers = $c->req->headers->clone->dehop;
$headers->accept('application/json');
my $tx = $c->ua->build_tx(PUT => 'https://mojolicious.org' => $headers->to_hash);
Hello World
If every byte matters this is the smallest "Hello World" application you can write with
Mojolicious::Lite.
use Mojolicious::Lite;
any {text => 'Hello World!'};
app->start;
It works because all routes without a pattern default to "/" and automatic rendering kicks
in even if no actual code gets executed by the router. The renderer just picks up the
"text" value from the stash and generates a response.
Hello World one-liners
The "Hello World" example above can get even a little bit shorter in an ojo one-liner.
$ perl -Mojo -E 'a({text => "Hello World!"})->start' daemon
And you can use all the commands from Mojolicious::Commands.
$ perl -Mojo -E 'a({text => "Hello World!"})->start' get -v /
MORE
You can continue with Mojolicious::Guides now or take a look at the Mojolicious wiki
<https://github.com/mojolicious/mojo/wiki>, which contains a lot more documentation and
examples by many different authors.
SUPPORT
If you have any questions the documentation might not yet answer, don't hesitate to ask in
the Forum <https://forum.mojolicious.org>, on Matrix
<https://matrix.to/#/#mojo:matrix.org>, or IRC <https://web.libera.chat/#mojo>.