Provided by: zoneminder_1.36.32+dfsg1-1_amd64 
NAME
ONVIF::Media::Interfaces::Media::MediaPort - SOAP Interface for the Media Web Service
SYNOPSIS
use ONVIF::Media::Interfaces::Media::MediaPort;
my $interface = ONVIF::Media::Interfaces::Media::MediaPort->new();
my $response;
$response = $interface->GetServiceCapabilities();
$response = $interface->GetVideoSources();
$response = $interface->GetAudioSources();
$response = $interface->GetAudioOutputs();
$response = $interface->CreateProfile();
$response = $interface->GetProfile();
$response = $interface->GetProfiles();
$response = $interface->AddVideoEncoderConfiguration();
$response = $interface->AddVideoSourceConfiguration();
$response = $interface->AddAudioEncoderConfiguration();
$response = $interface->AddAudioSourceConfiguration();
$response = $interface->AddPTZConfiguration();
$response = $interface->AddVideoAnalyticsConfiguration();
$response = $interface->AddMetadataConfiguration();
$response = $interface->AddAudioOutputConfiguration();
$response = $interface->AddAudioDecoderConfiguration();
$response = $interface->RemoveVideoEncoderConfiguration();
$response = $interface->RemoveVideoSourceConfiguration();
$response = $interface->RemoveAudioEncoderConfiguration();
$response = $interface->RemoveAudioSourceConfiguration();
$response = $interface->RemovePTZConfiguration();
$response = $interface->RemoveVideoAnalyticsConfiguration();
$response = $interface->RemoveMetadataConfiguration();
$response = $interface->RemoveAudioOutputConfiguration();
$response = $interface->RemoveAudioDecoderConfiguration();
$response = $interface->DeleteProfile();
$response = $interface->GetVideoSourceConfigurations();
$response = $interface->GetVideoEncoderConfigurations();
$response = $interface->GetAudioSourceConfigurations();
$response = $interface->GetAudioEncoderConfigurations();
$response = $interface->GetVideoAnalyticsConfigurations();
$response = $interface->GetMetadataConfigurations();
$response = $interface->GetAudioOutputConfigurations();
$response = $interface->GetAudioDecoderConfigurations();
$response = $interface->GetVideoSourceConfiguration();
$response = $interface->GetVideoEncoderConfiguration();
$response = $interface->GetAudioSourceConfiguration();
$response = $interface->GetAudioEncoderConfiguration();
$response = $interface->GetVideoAnalyticsConfiguration();
$response = $interface->GetMetadataConfiguration();
$response = $interface->GetAudioOutputConfiguration();
$response = $interface->GetAudioDecoderConfiguration();
$response = $interface->GetCompatibleVideoEncoderConfigurations();
$response = $interface->GetCompatibleVideoSourceConfigurations();
$response = $interface->GetCompatibleAudioEncoderConfigurations();
$response = $interface->GetCompatibleAudioSourceConfigurations();
$response = $interface->GetCompatibleVideoAnalyticsConfigurations();
$response = $interface->GetCompatibleMetadataConfigurations();
$response = $interface->GetCompatibleAudioOutputConfigurations();
$response = $interface->GetCompatibleAudioDecoderConfigurations();
$response = $interface->SetVideoSourceConfiguration();
$response = $interface->SetVideoEncoderConfiguration();
$response = $interface->SetAudioSourceConfiguration();
$response = $interface->SetAudioEncoderConfiguration();
$response = $interface->SetVideoAnalyticsConfiguration();
$response = $interface->SetMetadataConfiguration();
$response = $interface->SetAudioOutputConfiguration();
$response = $interface->SetAudioDecoderConfiguration();
$response = $interface->GetVideoSourceConfigurationOptions();
$response = $interface->GetVideoEncoderConfigurationOptions();
$response = $interface->GetAudioSourceConfigurationOptions();
$response = $interface->GetAudioEncoderConfigurationOptions();
$response = $interface->GetMetadataConfigurationOptions();
$response = $interface->GetAudioOutputConfigurationOptions();
$response = $interface->GetAudioDecoderConfigurationOptions();
$response = $interface->GetGuaranteedNumberOfVideoEncoderInstances();
$response = $interface->GetStreamUri();
$response = $interface->StartMulticastStreaming();
$response = $interface->StopMulticastStreaming();
$response = $interface->SetSynchronizationPoint();
$response = $interface->GetSnapshotUri();
$response = $interface->GetVideoSourceModes();
$response = $interface->SetVideoSourceMode();
$response = $interface->GetOSDs();
$response = $interface->GetOSD();
$response = $interface->GetOSDOptions();
$response = $interface->SetOSD();
$response = $interface->CreateOSD();
$response = $interface->DeleteOSD();
DESCRIPTION
SOAP Interface for the Media web service located at http://www.examples.com/Media/.
SERVICE Media
Port MediaPort
METHODS
General methods
new
Constructor.
All arguments are forwarded to SOAP::WSDL::Client.
SOAP Service methods
Method synopsis is displayed with hash refs as parameters.
The commented class names in the method's parameters denote that objects of the
corresponding class can be passed instead of the marked hash ref.
You may pass any combination of objects, hash and list refs to these methods, as long as
you meet the structure.
List items (i.e. multiple occurrences) are not displayed in the synopsis. You may
generally pass a list ref of hash refs (or objects) instead of a hash ref - this may
result in invalid XML if used improperly, though. Note that SOAP::WSDL always expects list
references at maximum depth position.
XML attributes are not displayed in this synopsis and cannot be set using hash refs. See
the respective class' documentation for additional information.
GetServiceCapabilities
Returns the capabilities of the media service. The result is returned in a typed answer.
Returns a ONVIF::Media::Elements::GetServiceCapabilitiesResponse object.
$response = $interface->GetServiceCapabilities( {
},,
);
GetVideoSources
This command lists all available physical video inputs of the device.
Returns a ONVIF::Media::Elements::GetVideoSourcesResponse object.
$response = $interface->GetVideoSources( {
},,
);
GetAudioSources
This command lists all available physical audio inputs of the device.
Returns a ONVIF::Media::Elements::GetAudioSourcesResponse object.
$response = $interface->GetAudioSources( {
},,
);
GetAudioOutputs
This command lists all available physical audio outputs of the device.
Returns a ONVIF::Media::Elements::GetAudioOutputsResponse object.
$response = $interface->GetAudioOutputs( {
},,
);
CreateProfile
This operation creates a new empty media profile. The media profile shall be created in
the device and shall be persistent (remain after reboot). A created profile shall be
deletable and a device shall set the "fixed" attribute to false in the returned Profile.
Returns a ONVIF::Media::Elements::CreateProfileResponse object.
$response = $interface->CreateProfile( {
Name => $some_value, # Name
Token => $some_value, # ReferenceToken
},,
);
GetProfile
If the profile token is already known, a profile can be fetched through the GetProfile
command.
Returns a ONVIF::Media::Elements::GetProfileResponse object.
$response = $interface->GetProfile( {
ProfileToken => $some_value, # ReferenceToken
},,
);
GetProfiles
Any endpoint can ask for the existing media profiles of a device using the GetProfiles
command. Pre-configured or dynamically configured profiles can be retrieved using this
command. This command lists all configured profiles in a device. The client does not need
to know the media profile in order to use the command.
Returns a ONVIF::Media::Elements::GetProfilesResponse object.
$response = $interface->GetProfiles( {
},,
);
AddVideoEncoderConfiguration
This operation adds a VideoEncoderConfiguration to an existing media profile. If a
configuration exists in the media profile, it will be replaced. The change shall be
persistent. A device shall support adding a compatible VideoEncoderConfiguration to a
Profile containing a VideoSourceConfiguration and shall support streaming video data of
such a profile.
Returns a ONVIF::Media::Elements::AddVideoEncoderConfigurationResponse object.
$response = $interface->AddVideoEncoderConfiguration( {
ProfileToken => $some_value, # ReferenceToken
ConfigurationToken => $some_value, # ReferenceToken
},,
);
AddVideoSourceConfiguration
This operation adds a VideoSourceConfiguration to an existing media profile. If such a
configuration exists in the media profile, it will be replaced. The change shall be
persistent.
Returns a ONVIF::Media::Elements::AddVideoSourceConfigurationResponse object.
$response = $interface->AddVideoSourceConfiguration( {
ProfileToken => $some_value, # ReferenceToken
ConfigurationToken => $some_value, # ReferenceToken
},,
);
AddAudioEncoderConfiguration
This operation adds an AudioEncoderConfiguration to an existing media profile. If a
configuration exists in the media profile, it will be replaced. The change shall be
persistent. A device shall support adding a compatible AudioEncoderConfiguration to a
profile containing an AudioSourceConfiguration and shall support streaming audio data of
such a profile.
Returns a ONVIF::Media::Elements::AddAudioEncoderConfigurationResponse object.
$response = $interface->AddAudioEncoderConfiguration( {
ProfileToken => $some_value, # ReferenceToken
ConfigurationToken => $some_value, # ReferenceToken
},,
);
AddAudioSourceConfiguration
This operation adds an AudioSourceConfiguration to an existing media profile. If a
configuration exists in the media profile, it will be replaced. The change shall be
persistent.
Returns a ONVIF::Media::Elements::AddAudioSourceConfigurationResponse object.
$response = $interface->AddAudioSourceConfiguration( {
ProfileToken => $some_value, # ReferenceToken
ConfigurationToken => $some_value, # ReferenceToken
},,
);
AddPTZConfiguration
This operation adds a PTZConfiguration to an existing media profile. If a configuration
exists in the media profile, it will be replaced. The change shall be persistent. Adding a
PTZConfiguration to a media profile means that streams using that media profile can
contain PTZ status (in the metadata), and that the media profile can be used for
controlling PTZ movement.
Returns a ONVIF::Media::Elements::AddPTZConfigurationResponse object.
$response = $interface->AddPTZConfiguration( {
ProfileToken => $some_value, # ReferenceToken
ConfigurationToken => $some_value, # ReferenceToken
},,
);
AddVideoAnalyticsConfiguration
This operation adds a VideoAnalytics configuration to an existing media profile. If a
configuration exists in the media profile, it will be replaced. The change shall be
persistent. Adding a VideoAnalyticsConfiguration to a media profile means that streams
using that media profile can contain video analytics data (in the metadata) as defined by
the submitted configuration reference. A profile containing only a video analytics
configuration but no video source configuration is incomplete. Therefore, a client should
first add a video source configuration to a profile before adding a video analytics
configuration. The device can deny adding of a video analytics configuration before a
video source configuration.
Returns a ONVIF::Media::Elements::AddVideoAnalyticsConfigurationResponse object.
$response = $interface->AddVideoAnalyticsConfiguration( {
ProfileToken => $some_value, # ReferenceToken
ConfigurationToken => $some_value, # ReferenceToken
},,
);
AddMetadataConfiguration
This operation adds a Metadata configuration to an existing media profile. If a
configuration exists in the media profile, it will be replaced. The change shall be
persistent. Adding a MetadataConfiguration to a Profile means that streams using that
profile contain metadata. Metadata can consist of events, PTZ status, and/or video
analytics data.
Returns a ONVIF::Media::Elements::AddMetadataConfigurationResponse object.
$response = $interface->AddMetadataConfiguration( {
ProfileToken => $some_value, # ReferenceToken
ConfigurationToken => $some_value, # ReferenceToken
},,
);
AddAudioOutputConfiguration
This operation adds an AudioOutputConfiguration to an existing media profile. If a
configuration exists in the media profile, it will be replaced. The change shall be
persistent.
Returns a ONVIF::Media::Elements::AddAudioOutputConfigurationResponse object.
$response = $interface->AddAudioOutputConfiguration( {
ProfileToken => $some_value, # ReferenceToken
ConfigurationToken => $some_value, # ReferenceToken
},,
);
AddAudioDecoderConfiguration
This operation adds an AudioDecoderConfiguration to an existing media profile. If a
configuration exists in the media profile, it shall be replaced. The change shall be
persistent.
Returns a ONVIF::Media::Elements::AddAudioDecoderConfigurationResponse object.
$response = $interface->AddAudioDecoderConfiguration( {
ProfileToken => $some_value, # ReferenceToken
ConfigurationToken => $some_value, # ReferenceToken
},,
);
RemoveVideoEncoderConfiguration
This operation removes a VideoEncoderConfiguration from an existing media profile. If the
media profile does not contain a VideoEncoderConfiguration, the operation has no effect.
The removal shall be persistent.
Returns a ONVIF::Media::Elements::RemoveVideoEncoderConfigurationResponse object.
$response = $interface->RemoveVideoEncoderConfiguration( {
ProfileToken => $some_value, # ReferenceToken
},,
);
RemoveVideoSourceConfiguration
This operation removes a VideoSourceConfiguration from an existing media profile. If the
media profile does not contain a VideoSourceConfiguration, the operation has no effect.
The removal shall be persistent. Video source configurations should only be removed after
removing a VideoEncoderConfiguration from the media profile.
Returns a ONVIF::Media::Elements::RemoveVideoSourceConfigurationResponse object.
$response = $interface->RemoveVideoSourceConfiguration( {
ProfileToken => $some_value, # ReferenceToken
},,
);
RemoveAudioEncoderConfiguration
This operation removes an AudioEncoderConfiguration from an existing media profile. If the
media profile does not contain an AudioEncoderConfiguration, the operation has no effect.
The removal shall be persistent.
Returns a ONVIF::Media::Elements::RemoveAudioEncoderConfigurationResponse object.
$response = $interface->RemoveAudioEncoderConfiguration( {
ProfileToken => $some_value, # ReferenceToken
},,
);
RemoveAudioSourceConfiguration
This operation removes an AudioSourceConfiguration from an existing media profile. If the
media profile does not contain an AudioSourceConfiguration, the operation has no effect.
The removal shall be persistent. Audio source configurations should only be removed after
removing an AudioEncoderConfiguration from the media profile.
Returns a ONVIF::Media::Elements::RemoveAudioSourceConfigurationResponse object.
$response = $interface->RemoveAudioSourceConfiguration( {
ProfileToken => $some_value, # ReferenceToken
},,
);
RemovePTZConfiguration
This operation removes a PTZConfiguration from an existing media profile. If the media
profile does not contain a PTZConfiguration, the operation has no effect. The removal
shall be persistent.
Returns a ONVIF::Media::Elements::RemovePTZConfigurationResponse object.
$response = $interface->RemovePTZConfiguration( {
ProfileToken => $some_value, # ReferenceToken
},,
);
RemoveVideoAnalyticsConfiguration
This operation removes a VideoAnalyticsConfiguration from an existing media profile. If
the media profile does not contain a VideoAnalyticsConfiguration, the operation has no
effect. The removal shall be persistent.
Returns a ONVIF::Media::Elements::RemoveVideoAnalyticsConfigurationResponse object.
$response = $interface->RemoveVideoAnalyticsConfiguration( {
ProfileToken => $some_value, # ReferenceToken
},,
);
RemoveMetadataConfiguration
This operation removes a MetadataConfiguration from an existing media profile. If the
media profile does not contain a MetadataConfiguration, the operation has no effect. The
removal shall be persistent.
Returns a ONVIF::Media::Elements::RemoveMetadataConfigurationResponse object.
$response = $interface->RemoveMetadataConfiguration( {
ProfileToken => $some_value, # ReferenceToken
},,
);
RemoveAudioOutputConfiguration
This operation removes an AudioOutputConfiguration from an existing media profile. If the
media profile does not contain an AudioOutputConfiguration, the operation has no effect.
The removal shall be persistent.
Returns a ONVIF::Media::Elements::RemoveAudioOutputConfigurationResponse object.
$response = $interface->RemoveAudioOutputConfiguration( {
ProfileToken => $some_value, # ReferenceToken
},,
);
RemoveAudioDecoderConfiguration
This operation removes an AudioDecoderConfiguration from an existing media profile. If the
media profile does not contain an AudioDecoderConfiguration, the operation has no effect.
The removal shall be persistent.
Returns a ONVIF::Media::Elements::RemoveAudioDecoderConfigurationResponse object.
$response = $interface->RemoveAudioDecoderConfiguration( {
ProfileToken => $some_value, # ReferenceToken
},,
);
DeleteProfile
This operation deletes a profile. This change shall always be persistent. Deletion of a
profile is only possible for non-fixed profiles
Returns a ONVIF::Media::Elements::DeleteProfileResponse object.
$response = $interface->DeleteProfile( {
ProfileToken => $some_value, # ReferenceToken
},,
);
GetVideoSourceConfigurations
This operation lists all existing video source configurations for a device. The client
need not know anything about the video source configurations in order to use the command.
Returns a ONVIF::Media::Elements::GetVideoSourceConfigurationsResponse object.
$response = $interface->GetVideoSourceConfigurations( {
},,
);
GetVideoEncoderConfigurations
This operation lists all existing video encoder configurations of a device. This command
lists all configured video encoder configurations in a device. The client need not know
anything apriori about the video encoder configurations in order to use the command.
Returns a ONVIF::Media::Elements::GetVideoEncoderConfigurationsResponse object.
$response = $interface->GetVideoEncoderConfigurations( {
},,
);
GetAudioSourceConfigurations
This operation lists all existing audio source configurations of a device. This command
lists all audio source configurations in a device. The client need not know anything
apriori about the audio source configurations in order to use the command.
Returns a ONVIF::Media::Elements::GetAudioSourceConfigurationsResponse object.
$response = $interface->GetAudioSourceConfigurations( {
},,
);
GetAudioEncoderConfigurations
This operation lists all existing device audio encoder configurations. The client need not
know anything apriori about the audio encoder configurations in order to use the command.
Returns a ONVIF::Media::Elements::GetAudioEncoderConfigurationsResponse object.
$response = $interface->GetAudioEncoderConfigurations( {
},,
);
GetVideoAnalyticsConfigurations
This operation lists all video analytics configurations of a device. This command lists
all configured video analytics in a device. The client need not know anything apriori
about the video analytics in order to use the command.
Returns a ONVIF::Media::Elements::GetVideoAnalyticsConfigurationsResponse object.
$response = $interface->GetVideoAnalyticsConfigurations( {
},,
);
GetMetadataConfigurations
This operation lists all existing metadata configurations. The client need not know
anything apriori about the metadata in order to use the command.
Returns a ONVIF::Media::Elements::GetMetadataConfigurationsResponse object.
$response = $interface->GetMetadataConfigurations( {
},,
);
GetAudioOutputConfigurations
This command lists all existing AudioOutputConfigurations of a device. The NVC need not
know anything apriori about the audio configurations to use this command.
Returns a ONVIF::Media::Elements::GetAudioOutputConfigurationsResponse object.
$response = $interface->GetAudioOutputConfigurations( {
},,
);
GetAudioDecoderConfigurations
This command lists all existing AudioDecoderConfigurations of a device. The NVC need not
know anything apriori about the audio decoder configurations in order to use this command.
Returns a ONVIF::Media::Elements::GetAudioDecoderConfigurationsResponse object.
$response = $interface->GetAudioDecoderConfigurations( {
},,
);
GetVideoSourceConfiguration
If the video source configuration token is already known, the video source configuration
can be fetched through the GetVideoSourceConfiguration command.
Returns a ONVIF::Media::Elements::GetVideoSourceConfigurationResponse object.
$response = $interface->GetVideoSourceConfiguration( {
ConfigurationToken => $some_value, # ReferenceToken
},,
);
GetVideoEncoderConfiguration
If the video encoder configuration token is already known, the encoder configuration can
be fetched through the GetVideoEncoderConfiguration command.
Returns a ONVIF::Media::Elements::GetVideoEncoderConfigurationResponse object.
$response = $interface->GetVideoEncoderConfiguration( {
ConfigurationToken => $some_value, # ReferenceToken
},,
);
GetAudioSourceConfiguration
The GetAudioSourceConfiguration command fetches the audio source configurations if the
audio source configuration token is already known. An
Returns a ONVIF::Media::Elements::GetAudioSourceConfigurationResponse object.
$response = $interface->GetAudioSourceConfiguration( {
ConfigurationToken => $some_value, # ReferenceToken
},,
);
GetAudioEncoderConfiguration
The GetAudioEncoderConfiguration command fetches the encoder configuration if the audio
encoder configuration token is known.
Returns a ONVIF::Media::Elements::GetAudioEncoderConfigurationResponse object.
$response = $interface->GetAudioEncoderConfiguration( {
ConfigurationToken => $some_value, # ReferenceToken
},,
);
GetVideoAnalyticsConfiguration
The GetVideoAnalyticsConfiguration command fetches the video analytics configuration if
the video analytics token is known.
Returns a ONVIF::Media::Elements::GetVideoAnalyticsConfigurationResponse object.
$response = $interface->GetVideoAnalyticsConfiguration( {
ConfigurationToken => $some_value, # ReferenceToken
},,
);
GetMetadataConfiguration
The GetMetadataConfiguration command fetches the metadata configuration if the metadata
token is known.
Returns a ONVIF::Media::Elements::GetMetadataConfigurationResponse object.
$response = $interface->GetMetadataConfiguration( {
ConfigurationToken => $some_value, # ReferenceToken
},,
);
GetAudioOutputConfiguration
If the audio output configuration token is already known, the output configuration can be
fetched through the GetAudioOutputConfiguration command.
Returns a ONVIF::Media::Elements::GetAudioOutputConfigurationResponse object.
$response = $interface->GetAudioOutputConfiguration( {
ConfigurationToken => $some_value, # ReferenceToken
},,
);
GetAudioDecoderConfiguration
If the audio decoder configuration token is already known, the decoder configuration can
be fetched through the GetAudioDecoderConfiguration command.
Returns a ONVIF::Media::Elements::GetAudioDecoderConfigurationResponse object.
$response = $interface->GetAudioDecoderConfiguration( {
ConfigurationToken => $some_value, # ReferenceToken
},,
);
GetCompatibleVideoEncoderConfigurations
This operation lists all the video encoder configurations of the device that are
compatible with a certain media profile. Each of the returned configurations shall be a
valid input parameter for the AddVideoEncoderConfiguration command on the media profile.
The result will vary depending on the capabilities, configurations and settings in the
device.
Returns a ONVIF::Media::Elements::GetCompatibleVideoEncoderConfigurationsResponse object.
$response = $interface->GetCompatibleVideoEncoderConfigurations( {
ProfileToken => $some_value, # ReferenceToken
},,
);
GetCompatibleVideoSourceConfigurations
This operation requests all the video source configurations of the device that are
compatible with a certain media profile. Each of the returned configurations shall be a
valid input parameter for the AddVideoSourceConfiguration command on the media profile.
The result will vary depending on the capabilities, configurations and settings in the
device.
Returns a ONVIF::Media::Elements::GetCompatibleVideoSourceConfigurationsResponse object.
$response = $interface->GetCompatibleVideoSourceConfigurations( {
ProfileToken => $some_value, # ReferenceToken
},,
);
GetCompatibleAudioEncoderConfigurations
This operation requests all audio encoder configurations of a device that are compatible
with a certain media profile. Each of the returned configurations shall be a valid input
parameter for the AddAudioSourceConfiguration command on the media profile. The result
varies depending on the capabilities, configurations and settings in the device.
Returns a ONVIF::Media::Elements::GetCompatibleAudioEncoderConfigurationsResponse object.
$response = $interface->GetCompatibleAudioEncoderConfigurations( {
ProfileToken => $some_value, # ReferenceToken
},,
);
GetCompatibleAudioSourceConfigurations
This operation requests all audio source configurations of the device that are compatible
with a certain media profile. Each of the returned configurations shall be a valid input
parameter for the AddAudioEncoderConfiguration command on the media profile. The result
varies depending on the capabilities, configurations and settings in the device.
Returns a ONVIF::Media::Elements::GetCompatibleAudioSourceConfigurationsResponse object.
$response = $interface->GetCompatibleAudioSourceConfigurations( {
ProfileToken => $some_value, # ReferenceToken
},,
);
GetCompatibleVideoAnalyticsConfigurations
This operation requests all video analytic configurations of the device that are
compatible with a certain media profile. Each of the returned configurations shall be a
valid input parameter for the AddVideoAnalyticsConfiguration command on the media profile.
The result varies depending on the capabilities, configurations and settings in the
device.
Returns a ONVIF::Media::Elements::GetCompatibleVideoAnalyticsConfigurationsResponse
object.
$response = $interface->GetCompatibleVideoAnalyticsConfigurations( {
ProfileToken => $some_value, # ReferenceToken
},,
);
GetCompatibleMetadataConfigurations
This operation requests all the metadata configurations of the device that are compatible
with a certain media profile. Each of the returned configurations shall be a valid input
parameter for the AddMetadataConfiguration command on the media profile. The result varies
depending on the capabilities, configurations and settings in the device.
Returns a ONVIF::Media::Elements::GetCompatibleMetadataConfigurationsResponse object.
$response = $interface->GetCompatibleMetadataConfigurations( {
ProfileToken => $some_value, # ReferenceToken
},,
);
GetCompatibleAudioOutputConfigurations
This command lists all audio output configurations of a device that are compatible with a
certain media profile. Each returned configuration shall be a valid input for the
AddAudioOutputConfiguration command.
Returns a ONVIF::Media::Elements::GetCompatibleAudioOutputConfigurationsResponse object.
$response = $interface->GetCompatibleAudioOutputConfigurations( {
ProfileToken => $some_value, # ReferenceToken
},,
);
GetCompatibleAudioDecoderConfigurations
This operation lists all the audio decoder configurations of the device that are
compatible with a certain media profile. Each of the returned configurations shall be a
valid input parameter for the AddAudioDecoderConfiguration command on the media profile.
Returns a ONVIF::Media::Elements::GetCompatibleAudioDecoderConfigurationsResponse object.
$response = $interface->GetCompatibleAudioDecoderConfigurations( {
ProfileToken => $some_value, # ReferenceToken
},,
);
SetVideoSourceConfiguration
This operation modifies a video source configuration. The ForcePersistence flag indicates
if the changes shall remain after reboot of the device. Running streams using this
configuration may be immediately updated according to the new settings. The changes are
not guaranteed to take effect unless the client requests a new stream URI and restarts any
affected stream. NVC methods for changing a running stream are out of scope for this
specification.
Returns a ONVIF::Media::Elements::SetVideoSourceConfigurationResponse object.
$response = $interface->SetVideoSourceConfiguration( {
Configuration => { # ONVIF::Media::Types::VideoSourceConfiguration
SourceToken => $some_value, # ReferenceToken
Bounds => ,
Extension => { # ONVIF::Media::Types::VideoSourceConfigurationExtension
Rotate => { # ONVIF::Media::Types::Rotate
Mode => $some_value, # RotateMode
Degree => $some_value, # int
Extension => { # ONVIF::Media::Types::RotateExtension
},
},
Extension => { # ONVIF::Media::Types::VideoSourceConfigurationExtension2
},
},
},
ForcePersistence => $some_value, # boolean
},,
);
SetVideoEncoderConfiguration
SessionTimeout is provided as a hint for keeping rtsp session by a device. If necessary
the device may adapt parameter values for SessionTimeout elements without returning an
error. For the time between keep alive calls the client shall adhere to the timeout value
signaled via RTSP.
Returns a ONVIF::Media::Elements::SetVideoEncoderConfigurationResponse object.
$response = $interface->SetVideoEncoderConfiguration( {
Configuration => { # ONVIF::Media::Types::VideoEncoderConfiguration
Encoding => $some_value, # VideoEncoding
Resolution => { # ONVIF::Media::Types::VideoResolution
Width => $some_value, # int
Height => $some_value, # int
},
Quality => $some_value, # float
RateControl => { # ONVIF::Media::Types::VideoRateControl
FrameRateLimit => $some_value, # int
EncodingInterval => $some_value, # int
BitrateLimit => $some_value, # int
},
MPEG4 => { # ONVIF::Media::Types::Mpeg4Configuration
GovLength => $some_value, # int
Mpeg4Profile => $some_value, # Mpeg4Profile
},
H264 => { # ONVIF::Media::Types::H264Configuration
GovLength => $some_value, # int
H264Profile => $some_value, # H264Profile
},
Multicast => { # ONVIF::Media::Types::MulticastConfiguration
Address => { # ONVIF::Media::Types::IPAddress
Type => $some_value, # IPType
IPv4Address => $some_value, # IPv4Address
IPv6Address => $some_value, # IPv6Address
},
Port => $some_value, # int
TTL => $some_value, # int
AutoStart => $some_value, # boolean
},
SessionTimeout => $some_value, # duration
},
ForcePersistence => $some_value, # boolean
},,
);
SetAudioSourceConfiguration
This operation modifies an audio source configuration. The ForcePersistence flag indicates
if the changes shall remain after reboot of the device. Running streams using this
configuration may be immediately updated according to the new settings. The changes are
not guaranteed to take effect unless the client requests a new stream URI and restarts any
affected stream NVC methods for changing a running stream are out of scope for this
specification.
Returns a ONVIF::Media::Elements::SetAudioSourceConfigurationResponse object.
$response = $interface->SetAudioSourceConfiguration( {
Configuration => { # ONVIF::Media::Types::AudioSourceConfiguration
SourceToken => $some_value, # ReferenceToken
},
ForcePersistence => $some_value, # boolean
},,
);
SetAudioEncoderConfiguration
This operation modifies an audio encoder configuration. The ForcePersistence flag
indicates if the changes shall remain after reboot of the device. Running streams using
this configuration may be immediately updated according to the new settings. The changes
are not guaranteed to take effect unless the client requests a new stream URI and restarts
any affected streams. NVC methods for changing a running stream are out of scope for this
specification.
Returns a ONVIF::Media::Elements::SetAudioEncoderConfigurationResponse object.
$response = $interface->SetAudioEncoderConfiguration( {
Configuration => { # ONVIF::Media::Types::AudioEncoderConfiguration
Encoding => $some_value, # AudioEncoding
Bitrate => $some_value, # int
SampleRate => $some_value, # int
Multicast => { # ONVIF::Media::Types::MulticastConfiguration
Address => { # ONVIF::Media::Types::IPAddress
Type => $some_value, # IPType
IPv4Address => $some_value, # IPv4Address
IPv6Address => $some_value, # IPv6Address
},
Port => $some_value, # int
TTL => $some_value, # int
AutoStart => $some_value, # boolean
},
SessionTimeout => $some_value, # duration
},
ForcePersistence => $some_value, # boolean
},,
);
SetVideoAnalyticsConfiguration
A video analytics configuration is modified using this command. The ForcePersistence flag
indicates if the changes shall remain after reboot of the device or not. Running streams
using this configuration shall be immediately updated according to the new settings.
Otherwise inconsistencies can occur between the scene description processed by the rule
engine and the notifications produced by analytics engine and rule engine which reference
the very same video analytics configuration token.
Returns a ONVIF::Media::Elements::SetVideoAnalyticsConfigurationResponse object.
$response = $interface->SetVideoAnalyticsConfiguration( {
Configuration => { # ONVIF::Media::Types::VideoAnalyticsConfiguration
AnalyticsEngineConfiguration => { # ONVIF::Media::Types::AnalyticsEngineConfiguration
AnalyticsModule => { # ONVIF::Media::Types::Config
Parameters => { # ONVIF::Media::Types::ItemList
SimpleItem => ,
ElementItem => {
},
Extension => { # ONVIF::Media::Types::ItemListExtension
},
},
},
Extension => { # ONVIF::Media::Types::AnalyticsEngineConfigurationExtension
},
},
RuleEngineConfiguration => { # ONVIF::Media::Types::RuleEngineConfiguration
Rule => { # ONVIF::Media::Types::Config
Parameters => { # ONVIF::Media::Types::ItemList
SimpleItem => ,
ElementItem => {
},
Extension => { # ONVIF::Media::Types::ItemListExtension
},
},
},
Extension => { # ONVIF::Media::Types::RuleEngineConfigurationExtension
},
},
},
ForcePersistence => $some_value, # boolean
},,
);
SetMetadataConfiguration
This operation modifies a metadata configuration. The ForcePersistence flag indicates if
the changes shall remain after reboot of the device. Changes in the Multicast settings
shall always be persistent. Running streams using this configuration may be updated
immediately according to the new settings. The changes are not guaranteed to take effect
unless the client requests a new stream URI and restarts any affected streams. NVC methods
for changing a running stream are out of scope for this specification.
Returns a ONVIF::Media::Elements::SetMetadataConfigurationResponse object.
$response = $interface->SetMetadataConfiguration( {
Configuration => { # ONVIF::Media::Types::MetadataConfiguration
PTZStatus => { # ONVIF::Media::Types::PTZFilter
Status => $some_value, # boolean
Position => $some_value, # boolean
},
Analytics => $some_value, # boolean
Multicast => { # ONVIF::Media::Types::MulticastConfiguration
Address => { # ONVIF::Media::Types::IPAddress
Type => $some_value, # IPType
IPv4Address => $some_value, # IPv4Address
IPv6Address => $some_value, # IPv6Address
},
Port => $some_value, # int
TTL => $some_value, # int
AutoStart => $some_value, # boolean
},
SessionTimeout => $some_value, # duration
AnalyticsEngineConfiguration => { # ONVIF::Media::Types::AnalyticsEngineConfiguration
AnalyticsModule => { # ONVIF::Media::Types::Config
Parameters => { # ONVIF::Media::Types::ItemList
SimpleItem => ,
ElementItem => {
},
Extension => { # ONVIF::Media::Types::ItemListExtension
},
},
},
Extension => { # ONVIF::Media::Types::AnalyticsEngineConfigurationExtension
},
},
Extension => { # ONVIF::Media::Types::MetadataConfigurationExtension
},
},
ForcePersistence => $some_value, # boolean
},,
);
SetAudioOutputConfiguration
This operation modifies an audio output configuration. The ForcePersistence flag indicates
if the changes shall remain after reboot of the device.
Returns a ONVIF::Media::Elements::SetAudioOutputConfigurationResponse object.
$response = $interface->SetAudioOutputConfiguration( {
Configuration => { # ONVIF::Media::Types::AudioOutputConfiguration
OutputToken => $some_value, # ReferenceToken
SendPrimacy => $some_value, # anyURI
OutputLevel => $some_value, # int
},
ForcePersistence => $some_value, # boolean
},,
);
SetAudioDecoderConfiguration
This operation modifies an audio decoder configuration. The ForcePersistence flag
indicates if the changes shall remain after reboot of the device.
Returns a ONVIF::Media::Elements::SetAudioDecoderConfigurationResponse object.
$response = $interface->SetAudioDecoderConfiguration( {
Configuration => { # ONVIF::Media::Types::AudioDecoderConfiguration
},
ForcePersistence => $some_value, # boolean
},,
);
GetVideoSourceConfigurationOptions
This operation returns the available options (supported values and ranges for video source
configuration parameters) when the video source parameters are reconfigured If a video
source configuration is specified, the options shall concern that particular
configuration. If a media profile is specified, the options shall be compatible with that
media profile.
Returns a ONVIF::Media::Elements::GetVideoSourceConfigurationOptionsResponse object.
$response = $interface->GetVideoSourceConfigurationOptions( {
ConfigurationToken => $some_value, # ReferenceToken
ProfileToken => $some_value, # ReferenceToken
},,
);
GetVideoEncoderConfigurationOptions
This response contains the available video encoder configuration options. If a video
encoder configuration is specified, the options shall concern that particular
configuration. If a media profile is specified, the options shall be compatible with that
media profile. If no tokens are specified, the options shall be considered generic for the
device.
Returns a ONVIF::Media::Elements::GetVideoEncoderConfigurationOptionsResponse object.
$response = $interface->GetVideoEncoderConfigurationOptions( {
ConfigurationToken => $some_value, # ReferenceToken
ProfileToken => $some_value, # ReferenceToken
},,
);
GetAudioSourceConfigurationOptions
This operation returns the available options (supported values and ranges for audio source
configuration parameters) when the audio source parameters are reconfigured. If an audio
source configuration is specified, the options shall concern that particular
configuration. If a media profile is specified, the options shall be compatible with that
media profile.
Returns a ONVIF::Media::Elements::GetAudioSourceConfigurationOptionsResponse object.
$response = $interface->GetAudioSourceConfigurationOptions( {
ConfigurationToken => $some_value, # ReferenceToken
ProfileToken => $some_value, # ReferenceToken
},,
);
GetAudioEncoderConfigurationOptions
This operation returns the available options (supported values and ranges for audio
encoder configuration parameters) when the audio encoder parameters are reconfigured.
Returns a ONVIF::Media::Elements::GetAudioEncoderConfigurationOptionsResponse object.
$response = $interface->GetAudioEncoderConfigurationOptions( {
ConfigurationToken => $some_value, # ReferenceToken
ProfileToken => $some_value, # ReferenceToken
},,
);
GetMetadataConfigurationOptions
This operation returns the available options (supported values and ranges for metadata
configuration parameters) for changing the metadata configuration.
Returns a ONVIF::Media::Elements::GetMetadataConfigurationOptionsResponse object.
$response = $interface->GetMetadataConfigurationOptions( {
ConfigurationToken => $some_value, # ReferenceToken
ProfileToken => $some_value, # ReferenceToken
},,
);
GetAudioOutputConfigurationOptions
This operation returns the available options (supported values and ranges for audio output
configuration parameters) for configuring an audio output.
Returns a ONVIF::Media::Elements::GetAudioOutputConfigurationOptionsResponse object.
$response = $interface->GetAudioOutputConfigurationOptions( {
ConfigurationToken => $some_value, # ReferenceToken
ProfileToken => $some_value, # ReferenceToken
},,
);
GetAudioDecoderConfigurationOptions
This command list the audio decoding capabilities for a given profile and configuration of
a device.
Returns a ONVIF::Media::Elements::GetAudioDecoderConfigurationOptionsResponse object.
$response = $interface->GetAudioDecoderConfigurationOptions( {
ConfigurationToken => $some_value, # ReferenceToken
ProfileToken => $some_value, # ReferenceToken
},,
);
GetGuaranteedNumberOfVideoEncoderInstances
The GetGuaranteedNumberOfVideoEncoderInstances command can be used to request the minimum
number of guaranteed video encoder instances (applications) per Video Source
Configuration.
Returns a ONVIF::Media::Elements::GetGuaranteedNumberOfVideoEncoderInstancesResponse
object.
$response = $interface->GetGuaranteedNumberOfVideoEncoderInstances( {
ConfigurationToken => $some_value, # ReferenceToken
},,
);
GetStreamUri
For full compatibility with other ONVIF services a device should not generate Uris longer than 128 octets.
Returns a ONVIF::Media::Elements::GetStreamUriResponse object.
$response = $interface->GetStreamUri( {
StreamSetup => { # ONVIF::Media::Types::StreamSetup
Stream => $some_value, # StreamType
Transport => { # ONVIF::Media::Types::Transport
Protocol => $some_value, # TransportProtocol
},
},
ProfileToken => $some_value, # ReferenceToken
},,
);
StartMulticastStreaming
This command starts multicast streaming using a specified media profile of a device.
Streaming continues until StopMulticastStreaming is called for the same Profile. The
streaming shall continue after a reboot of the device until a StopMulticastStreaming
request is received. The multicast address, port and TTL are configured in the
VideoEncoderConfiguration, AudioEncoderConfiguration and MetadataConfiguration
respectively.
Returns a ONVIF::Media::Elements::StartMulticastStreamingResponse object.
$response = $interface->StartMulticastStreaming( {
ProfileToken => $some_value, # ReferenceToken
},,
);
StopMulticastStreaming
This command stop multicast streaming using a specified media profile of a device
Returns a ONVIF::Media::Elements::StopMulticastStreamingResponse object.
$response = $interface->StopMulticastStreaming( {
ProfileToken => $some_value, # ReferenceToken
},,
);
SetSynchronizationPoint
Synchronization points allow clients to decode and correctly use all data after the
synchronization point. For example, if a video stream is configured with a large I-frame
distance and a client loses a single packet, the client does not display video until the
next I-frame is transmitted. In such cases, the client can request a Synchronization Point
which enforces the device to add an I-Frame as soon as possible. Clients can request
Synchronization Points for profiles. The device shall add synchronization points for all
streams associated with this profile. Similarly, a synchronization point is used to get an
update on full PTZ or event status through the metadata stream. If a video stream is
associated with the profile, an I-frame shall be added to this video stream. If a PTZ
metadata stream is associated to the profile, the PTZ position shall be repeated within
the metadata stream.
Returns a ONVIF::Media::Elements::SetSynchronizationPointResponse object.
$response = $interface->SetSynchronizationPoint( {
ProfileToken => $some_value, # ReferenceToken
},,
);
GetSnapshotUri
A client uses the GetSnapshotUri command to obtain a JPEG snapshot from the device. The
returned URI shall remain valid indefinitely even if the profile is changed. The
ValidUntilConnect, ValidUntilReboot and Timeout Parameter shall be set accordingly
(ValidUntilConnect=false, ValidUntilReboot=false, timeout=PT0S). The URI can be used for
acquiring a JPEG image through a HTTP GET operation. The image encoding will always be
JPEG regardless of the encoding setting in the media profile. The Jpeg settings (like
resolution or quality) may be taken from the profile if suitable. The provided image will
be updated automatically and independent from calls to GetSnapshotUri.
Returns a ONVIF::Media::Elements::GetSnapshotUriResponse object.
$response = $interface->GetSnapshotUri( {
ProfileToken => $some_value, # ReferenceToken
},,
);
GetVideoSourceModes
A device returns the information for current video source mode and settable video source
modes of specified video source. A device that indicates a capability of VideoSourceModes
shall support this command.
Returns a ONVIF::Media::Elements::GetVideoSourceModesResponse object.
$response = $interface->GetVideoSourceModes( {
VideoSourceToken => $some_value, # ReferenceToken
},,
);
SetVideoSourceMode
SetVideoSourceMode changes the media profile structure relating to video source for the
specified video source mode. A device that indicates a capability of VideoSourceModes
shall support this command. The behavior after changing the mode is not defined in this
specification.
Returns a ONVIF::Media::Elements::SetVideoSourceModeResponse object.
$response = $interface->SetVideoSourceMode( {
VideoSourceToken => $some_value, # ReferenceToken
VideoSourceModeToken => $some_value, # ReferenceToken
},,
);
GetOSDs
Get the OSDs.
Returns a ONVIF::Media::Elements::GetOSDsResponse object.
$response = $interface->GetOSDs( {
ConfigurationToken => $some_value, # ReferenceToken
},,
);
GetOSD
Get the OSD.
Returns a ONVIF::Media::Elements::GetOSDResponse object.
$response = $interface->GetOSD( {
OSDToken => $some_value, # ReferenceToken
},,
);
GetOSDOptions
Get the OSD Options.
Returns a ONVIF::Media::Elements::GetOSDOptionsResponse object.
$response = $interface->GetOSDOptions( {
ConfigurationToken => $some_value, # ReferenceToken
},,
);
SetOSD
Set the OSD
Returns a ONVIF::Media::Elements::SetOSDResponse object.
$response = $interface->SetOSD( {
OSD => { # ONVIF::Media::Types::OSDConfiguration
VideoSourceConfigurationToken => { value => $some_value },
Type => $some_value, # OSDType
Position => { # ONVIF::Media::Types::OSDPosConfiguration
Type => $some_value, # string
Pos => ,
Extension => { # ONVIF::Media::Types::OSDPosConfigurationExtension
},
},
TextString => { # ONVIF::Media::Types::OSDTextConfiguration
Type => $some_value, # string
DateFormat => $some_value, # string
TimeFormat => $some_value, # string
FontSize => $some_value, # int
FontColor => { # ONVIF::Media::Types::OSDColor
Color => ,
},
BackgroundColor => { # ONVIF::Media::Types::OSDColor
Color => ,
},
PlainText => $some_value, # string
Extension => { # ONVIF::Media::Types::OSDTextConfigurationExtension
},
},
Image => { # ONVIF::Media::Types::OSDImgConfiguration
ImgPath => $some_value, # anyURI
Extension => { # ONVIF::Media::Types::OSDImgConfigurationExtension
},
},
Extension => { # ONVIF::Media::Types::OSDConfigurationExtension
},
},
},,
);
CreateOSD
Create the OSD.
Returns a ONVIF::Media::Elements::CreateOSDResponse object.
$response = $interface->CreateOSD( {
OSD => { # ONVIF::Media::Types::OSDConfiguration
VideoSourceConfigurationToken => { value => $some_value },
Type => $some_value, # OSDType
Position => { # ONVIF::Media::Types::OSDPosConfiguration
Type => $some_value, # string
Pos => ,
Extension => { # ONVIF::Media::Types::OSDPosConfigurationExtension
},
},
TextString => { # ONVIF::Media::Types::OSDTextConfiguration
Type => $some_value, # string
DateFormat => $some_value, # string
TimeFormat => $some_value, # string
FontSize => $some_value, # int
FontColor => { # ONVIF::Media::Types::OSDColor
Color => ,
},
BackgroundColor => { # ONVIF::Media::Types::OSDColor
Color => ,
},
PlainText => $some_value, # string
Extension => { # ONVIF::Media::Types::OSDTextConfigurationExtension
},
},
Image => { # ONVIF::Media::Types::OSDImgConfiguration
ImgPath => $some_value, # anyURI
Extension => { # ONVIF::Media::Types::OSDImgConfigurationExtension
},
},
Extension => { # ONVIF::Media::Types::OSDConfigurationExtension
},
},
},,
);
DeleteOSD
Delete the OSD.
Returns a ONVIF::Media::Elements::DeleteOSDResponse object.
$response = $interface->DeleteOSD( {
OSDToken => $some_value, # ReferenceToken
},,
);
AUTHOR
Generated by SOAP::WSDL on Mon Jun 30 13:26:09 2014
perl v5.36.0 2022-1ONVIF::Media::Interfaces::Media::MediaPort(3pm)