Provided by: libperlbal-perl_1.80-4_all 
NAME
Perlbal::Plugin::Throttle - Perlbal plugin that throttles connections from hosts that
connect too frequently.
SYNOPSIS
# in perlbal.conf
LOAD Throttle
CREATE POOL web
POOL web ADD 10.0.0.1:80
CREATE SERVICE throttler
SET role = reverse_proxy
SET listen = 0.0.0.0:80
SET pool = web
# adjust throttler aggressiveness
SET initial_delay = 10
SET max_delay = 60
SET throttle_threshold_seconds = 3
SET max_concurrent = 2
SET ban_threshold = 4
SET ban_expiration = 180
# limit which requests are throttled
SET path_regex = ^/webapp/
SET method_regex = ^GET$
# allow or ban specific addresses or range (requires Net::CIDR::Lite)
SET whitelist_file = conf/whitelist.txt
SET blacklist_file = conf/blacklist.txt
# granular logging (requires Perlbal::Plugin::Syslogger)
SET log_events = ban,unban,throttled,banned
SET log_only = false
# share state between perlbals (requires Cache::Memcached::Async)
SET memcached_servers = 10.0.2.1:11211,10.0.2.2:11211
SET memcached_async_clients = 4
SET instance_name = mywebapp
SET plugins = Throttle
ENABLE throttler
DESCRIPTION
This plugin intercepts HTTP requests to a Perlbal service and slows or drops connections
from IP addresses which are determined to be connecting too fast.
BEHAVIOR
An IP address address may be in one of four states depending on its recent activity; that
state determines how new requests from the IP are handled:
• allowed
An IP begins in the allowed state. When a request is received from an IP in this
state, the request is handled immediately and the IP enters the probation state.
• probation
If no requests are received from an IP in the probation state for
throttle_threshold_seconds, it returns to the allowed state.
When a new request is received from an IP in the probation state, the IP enters the
throttled state and is assigned a delay property initially equal to initial_delay.
Connection to a backend is postponed for delay seconds while perlbal continues to
work. If the connection is still open after the delay, the request is then handled
normally. A dropped connection does not change the IP's delay value.
• throttled
If no requests are received from an IP in the throttled state for delay seconds, it
returns to the probation state.
When a new request is received from an IP in the throttled state, its violations
property is incremented, and its delay property is doubled (up to a maximum of
max_delay). The request is postponed for the new value of delay.
Only after the most recently created connection from a given IP exits the throttled
state do violations and delay reset to 0.
Furthermore, if the violations exceeds ban_threshold, the connection is closed and the
IP moves to the banned state.
IPs in the throttled state may have no more than max_concurrent connections being
delayed at once. Any additional requests received in that circumstance are sent a "503
Too many connections" response. Long-running requests which have already been
connected to a backend do not count towards this limit.
• banned
New connections from IPs in the banned state are immediately closed with a 403 error
response.
An IP leaves the banned state after ban_expiration seconds have elapsed.
FEATURES
• IP whitelist
Connections from IPs/CIDRs listed in the file specified by whitelist_file are always
allowed.
• IP blacklist
Connections from IPs/CIDRs listed in the file specified by blacklist_file immediately
sent a "403 Forbidden" response.
• Flexible attack response
For services where throttling should not normally be enabled, use the default_action
tunable. When default_action is set to "allow", new connections from
non-white/blacklisted IPs will not be throttled.
Furthermore, if throttling should only apply to specific clients, set blacklist_action
to "throttle". Blacklisted connections will then be throttled instead of denied.
• Dynamic configuration
Most service tunables may be updated from the management port, after which the new
values will be respected (although see "CAVEATS"). To reload the whitelist and
blacklist files, issue the throttle reload whitelist or throttle reload blacklist
command to the service.
• Path specificity
Throttling may be restricted to URI paths matching the path_regex regex.
• External shared state
The plugin stores state which IPs have been seen in a memcached(1) instance. This
allows many throttlers to share their state and also minimizes memory use within the
perlbal. If state exceeds the capacity of the memcacheds, the least-recently seen IPs
will be forgotten, effectively resetting them to the allowed state.
Orthogonally, multiple throttlers which need to share memcacheds but not state may
specify distinct instance_name values.
• Logging
If Perlbal::Plugin::Syslogger is installed and registered with the service, Throttle
can use it to send syslog messages regarding actions that are taken. Granular control
for which events are logged is available via the log_events parameter. log_events is
composed of one or more of the following events, separated by commas:
• ban
Log when a temporary local ban is added for an IP address.
• unban
Log when a temporary local ban is removed for an IP address.
• whitelisted
Log when a request is allowed because the source IP is on the whitelist.
• blacklisted
Log when a request is denied or throttled because the source IP is on the
blacklist.
• banned
Log when a request is denied because the source IP is on the temporary ban list
for connecting excessively.
• concurrent
Log when a request is denied because the source IP has too many open connections
waiting to be unthrottled.
• throttled
Log when a request is throttled because the source IP was not on the whitelist or
blacklist.
• all
Enables all the above logging options.
• none
Disables all the above logging options.
CAVEATS
• Dynamic configuration changes
Changes to certain service tunables will not be noticed until the throttle reload
config management command is issued. These include log_events, path_regex, and
method_regex).
Changes to certain other tunables will not be respected after the plugin has been
registered. These include memcached_servers and memcached_async_clients.
• List loading is blocking
The throttle reload whitelist and throttle reload blacklist management commands load
the whitelist and blacklist files synchronously, which will cause the perlbal to hang
until it completes.
• Redirects
If a handled request returns a 30x response code and the redirect URI is also
throttled, then the client's attempt to follow the redirect will necessarily be
delayed by initial_delay. Fixing this would require that the plugin inspect the HTTP
response headers, which would incur a lot of overhead. To workaround, try to have your
backend not return 30x's if both the original and redirect URI are proxied by the same
throttler instance (yes, this is difficult for the case where a backend 302s to add a
trailing / to a directory).
OPTIONAL DEPENDENCIES
• Cache::Memcached::Async
Required for memcached support. This is the supported way to share state between
different perlbal instances.
• Net::CIDR::Lite
Required for blacklist/whitelist support.
• Perlbal::Plugin::Syslogger
Required for event logging support.
SEE ALSO
• List of tunables in Throttle.pm.
TODO
• Fix white/blacklist loading
Load CIDR lists asynchronously (perhaps in the manner of
Perlbal::Pool::_load_nodefile_async).
AUTHOR
Adam Thomason, <athomason@cpan.org>
COPYRIGHT AND LICENSE
Copyright (C) 2007-2011 by Say Media Inc, <cpan@sixapart.com>
This library is free software; you can redistribute it and/or modify it under the same
terms as Perl itself, either Perl version 5.8.6 or, at your option, any later version of
Perl 5 you may have available.