Provided by: libswitch-perl_2.17-3_all 
NAME
Switch - A switch statement for Perl, do not use if you can use given/when
SYNOPSIS
use Switch;
switch ($val) {
case 1 { print "number 1" }
case "a" { print "string a" }
case [1..10,42] { print "number in list" }
case (\@array) { print "number in list" }
case /\w+/ { print "pattern" }
case qr/\w+/ { print "pattern" }
case (\%hash) { print "entry in hash" }
case (\&sub) { print "arg to subroutine" }
else { print "previous case not true" }
}
BACKGROUND
[Skip ahead to "DESCRIPTION" if you don't care about the whys and wherefores of this
control structure]
In seeking to devise a "Swiss Army" case mechanism suitable for Perl, it is useful to
generalize this notion of distributed conditional testing as far as possible.
Specifically, the concept of "matching" between the switch value and the various case
values need not be restricted to numeric (or string or referential) equality, as it is in
other languages. Indeed, as Table 1 illustrates, Perl offers at least eighteen different
ways in which two values could generate a match.
Table 1: Matching a switch value ($s) with a case value ($c)
Switch Case Type of Match Implied Matching Code
Value Value
====== ===== ===================== =============
number same numeric or referential match if $s == $c;
or ref equality
object method result of method call match if $s->$c();
ref name match if defined $s->$c();
or ref
other other string equality match if $s eq $c;
non-ref non-ref
scalar scalar
string regexp pattern match match if $s =~ /$c/;
array scalar array entry existence match if 0<=$c && $c<@$s;
ref array entry definition match if defined $s->[$c];
array entry truth match if $s->[$c];
array array array intersection match if intersects(@$s, @$c);
ref ref (apply this table to
all pairs of elements
$s->[$i] and
$c->[$j])
array regexp array grep match if grep /$c/, @$s;
ref
hash scalar hash entry existence match if exists $s->{$c};
ref hash entry definition match if defined $s->{$c};
hash entry truth match if $s->{$c};
hash regexp hash grep match if grep /$c/, keys %$s;
ref
sub scalar return value defn match if defined $s->($c);
ref return value truth match if $s->($c);
sub array return value defn match if defined $s->(@$c);
ref ref return value truth match if $s->(@$c);
In reality, Table 1 covers 31 alternatives, because only the equality and intersection
tests are commutative; in all other cases, the roles of the $s and $c variables could be
reversed to produce a different test. For example, instead of testing a single hash for
the existence of a series of keys ("match if exists $s->{$c}"), one could test for the
existence of a single key in a series of hashes ("match if exists $c->{$s}").
DESCRIPTION
The Switch.pm module implements a generalized case mechanism that covers most (but not
all) of the numerous possible combinations of switch and case values described above.
The module augments the standard Perl syntax with two new control statements: "switch" and
"case". The "switch" statement takes a single scalar argument of any type, specified in
parentheses. "switch" stores this value as the current switch value in a (localized)
control variable. The value is followed by a block which may contain one or more Perl
statements (including the "case" statement described below). The block is unconditionally
executed once the switch value has been cached.
A "case" statement takes a single scalar argument (in mandatory parentheses if it's a
variable; otherwise the parens are optional) and selects the appropriate type of matching
between that argument and the current switch value. The type of matching used is
determined by the respective types of the switch value and the "case" argument, as
specified in Table 1. If the match is successful, the mandatory block associated with the
"case" statement is executed.
In most other respects, the "case" statement is semantically identical to an "if"
statement. For example, it can be followed by an "else" clause, and can be used as a
postfix statement qualifier.
However, when a "case" block has been executed control is automatically transferred to the
statement after the immediately enclosing "switch" block, rather than to the next
statement within the block. In other words, the success of any "case" statement prevents
other cases in the same scope from executing. But see "Allowing fall-through" below.
Together these two new statements provide a fully generalized case mechanism:
use Switch;
# AND LATER...
%special = ( woohoo => 1, d'oh => 1 );
while (<>) {
chomp;
switch ($_) {
case (%special) { print "homer\n"; } # if $special{$_}
case /[a-z]/i { print "alpha\n"; } # if $_ =~ /a-z/i
case [1..9] { print "small num\n"; } # if $_ in [1..9]
case { $_[0] >= 10 } { print "big num\n"; } # if $_ >= 10
print "must be punctuation\n" case /\W/; # if $_ ~= /\W/
}
}
Note that "switch"es can be nested within "case" (or any other) blocks, and a series of
"case" statements can try different types of matches -- hash membership, pattern match,
array intersection, simple equality, etc. -- against the same switch value.
The use of intersection tests against an array reference is particularly useful for
aggregating integral cases:
sub classify_digit
{
switch ($_[0]) { case 0 { return 'zero' }
case [2,4,6,8] { return 'even' }
case [1,3,5,7,9] { return 'odd' }
case /[A-F]/i { return 'hex' }
}
}
Allowing fall-through
Fall-though (trying another case after one has already succeeded) is usually a Bad Idea in
a switch statement. However, this is Perl, not a police state, so there is a way to do it,
if you must.
If a "case" block executes an untargeted "next", control is immediately transferred to the
statement after the "case" statement (i.e. usually another case), rather than out of the
surrounding "switch" block.
For example:
switch ($val) {
case 1 { handle_num_1(); next } # and try next case...
case "1" { handle_str_1(); next } # and try next case...
case [0..9] { handle_num_any(); } # and we're done
case /\d/ { handle_dig_any(); next } # and try next case...
case /.*/ { handle_str_any(); next } # and try next case...
}
If $val held the number 1, the above "switch" block would call the first three
"handle_..." subroutines, jumping to the next case test each time it encountered a "next".
After the third "case" block was executed, control would jump to the end of the enclosing
"switch" block.
On the other hand, if $val held 10, then only the last two "handle_..." subroutines would
be called.
Note that this mechanism allows the notion of conditional fall-through. For example:
switch ($val) {
case [0..9] { handle_num_any(); next if $val < 7; }
case /\d/ { handle_dig_any(); }
}
If an untargeted "last" statement is executed in a case block, this immediately transfers
control out of the enclosing "switch" block (in other words, there is an implicit "last"
at the end of each normal "case" block). Thus the previous example could also have been
written:
switch ($val) {
case [0..9] { handle_num_any(); last if $val >= 7; next; }
case /\d/ { handle_dig_any(); }
}
Automating fall-through
In situations where case fall-through should be the norm, rather than an exception, an
endless succession of terminal "next"s is tedious and ugly. Hence, it is possible to
reverse the default behaviour by specifying the string "fallthrough" when importing the
module. For example, the following code is equivalent to the first example in "Allowing
fall-through":
use Switch 'fallthrough';
switch ($val) {
case 1 { handle_num_1(); }
case "1" { handle_str_1(); }
case [0..9] { handle_num_any(); last }
case /\d/ { handle_dig_any(); }
case /.*/ { handle_str_any(); }
}
Note the explicit use of a "last" to preserve the non-fall-through behaviour of the third
case.
Alternative syntax
Perl 6 will provide a built-in switch statement with essentially the same semantics as
those offered by Switch.pm, but with a different pair of keywords. In Perl 6 "switch" will
be spelled "given", and "case" will be pronounced "when". In addition, the "when"
statement will not require switch or case values to be parenthesized.
This future syntax is also (largely) available via the Switch.pm module, by importing it
with the argument "Perl6". For example:
use Switch 'Perl6';
given ($val) {
when 1 { handle_num_1(); }
when ($str1) { handle_str_1(); }
when [0..9] { handle_num_any(); last }
when /\d/ { handle_dig_any(); }
when /.*/ { handle_str_any(); }
default { handle anything else; }
}
Note that scalars still need to be parenthesized, since they would be ambiguous in Perl 5.
Note too that you can mix and match both syntaxes by importing the module with:
use Switch 'Perl5', 'Perl6';
Higher-order Operations
One situation in which "switch" and "case" do not provide a good substitute for a cascaded
"if", is where a switch value needs to be tested against a series of conditions. For
example:
sub beverage {
switch (shift) {
case { $_[0] < 10 } { return 'milk' }
case { $_[0] < 20 } { return 'coke' }
case { $_[0] < 30 } { return 'beer' }
case { $_[0] < 40 } { return 'wine' }
case { $_[0] < 50 } { return 'malt' }
case { $_[0] < 60 } { return 'Moet' }
else { return 'milk' }
}
}
(This is equivalent to writing "case (sub { $_[0] < 10 })", etc.; $_[0] is the argument to
the anonymous subroutine.)
The need to specify each condition as a subroutine block is tiresome. To overcome this,
when importing Switch.pm, a special "placeholder" subroutine named "__" [sic] may also be
imported. This subroutine converts (almost) any expression in which it appears to a
reference to a higher-order function. That is, the expression:
use Switch '__';
__ < 2
is equivalent to:
sub { $_[0] < 2 }
With "__", the previous ugly case statements can be rewritten:
case __ < 10 { return 'milk' }
case __ < 20 { return 'coke' }
case __ < 30 { return 'beer' }
case __ < 40 { return 'wine' }
case __ < 50 { return 'malt' }
case __ < 60 { return 'Moet' }
else { return 'milk' }
The "__" subroutine makes extensive use of operator overloading to perform its magic. All
operations involving __ are overloaded to produce an anonymous subroutine that implements
a lazy version of the original operation.
The only problem is that operator overloading does not allow the boolean operators "&&"
and "||" to be overloaded. So a case statement like this:
case 0 <= __ && __ < 10 { return 'digit' }
doesn't act as expected, because when it is executed, it constructs two higher order
subroutines and then treats the two resulting references as arguments to "&&":
sub { 0 <= $_[0] } && sub { $_[0] < 10 }
This boolean expression is inevitably true, since both references are non-false.
Fortunately, the overloaded 'bool' operator catches this situation and flags it as an
error.
DEPENDENCIES
The module is implemented using Filter::Util::Call and Text::Balanced and requires both
these modules to be installed.
AUTHOR
Damian Conway (damian@conway.org). This module is now maintained by Alexandr Ciornii
(alexchorny@gmail.com). Previously was maintained by Rafael Garcia-Suarez and perl5
porters.
BUGS
There are undoubtedly serious bugs lurking somewhere in code this funky :-) Bug reports
and other feedback are most welcome.
May create syntax errors in other parts of code.
On perl 5.10.x may cause syntax error if "case" is present inside heredoc.
In general, use given/when instead. It were introduced in perl 5.10.0. Perl 5.10.0 was
released in 2007.
LIMITATIONS
Due to the heuristic nature of Switch.pm's source parsing, the presence of regexes with
embedded newlines that are specified with raw "/.../" delimiters and don't have a modifier
"//x" are indistinguishable from code chunks beginning with the division operator "/". As
a workaround you must use "m/.../" or "m?...?" for such patterns. Also, the presence of
regexes specified with raw "?...?" delimiters may cause mysterious errors. The workaround
is to use "m?...?" instead.
Due to the way source filters work in Perl, you can't use Switch inside an string "eval".
May not work if sub prototypes are used (RT#33988).
Regex captures in when are not available to code.
If your source file is longer then 1 million characters and you have a switch statement
that crosses the 1 million (or 2 million, etc.) character boundary you will get
mysterious errors. The workaround is to use smaller source files.
COPYRIGHT
Copyright (c) 1997-2008, Damian Conway. All Rights Reserved.
This module is free software. It may be used, redistributed
and/or modified under the same terms as Perl itself.