Provided by: perl-doc_5.36.0-7_all 
NAME
Test2::Transition - Transition notes when upgrading to Test2
DESCRIPTION
This is where gotchas and breakages related to the Test2 upgrade are documented. The
upgrade causes Test::Builder to defer to Test2 under the hood. This transition is mostly
transparent, but there are a few cases that can trip you up.
THINGS THAT BREAK
This is the list of scenarios that break with the new internals.
Test::Builder1.5/2 conditionals
The Problem
a few years back there were two attempts to upgrade/replace Test::Builder. Confusingly
these were called Test::Builder2 and Test::Builder1.5, in that order. Many people put
conditionals in their code to check the Test::Builder version number and adapt their code
accordingly.
The Test::Builder2/1.5 projects both died out. Now the conditional code people added has
become a mine field. A vast majority of modules broken by Test2 fall into this category.
The Fix
The fix is to remove all Test::Builder1.5/2 related code. Either use the legacy
Test::Builder API, or use Test2 directly.
Replacing the Test::Builder singleton
The Problem
Some test modules would replace the Test::Builder singleton instance with their own
instance or subclass. This was usually done to intercept or modify results as they
happened.
The Test::Builder singleton is now a simple compatibility wrapper around Test2. The
Test::Builder singleton is no longer the central place for results. Many results bypass
the Test::Builder singleton completely, which breaks and behavior intended when replacing
the singleton.
The Fix
If you simply want to intercept all results instead of letting them go to TAP, you should
look at the Test2::API docs and read about pushing a new hub onto the hub stack. Replacing
the hub temporarily is now the correct way to intercept results.
If your goal is purely monitoring of events use the "Test2::Hub->listen()" method exported
by Test::More to watch events as they are fired. If you wish to modify results before they
go to TAP look at the "Test2::Hub->filter()" method.
Directly Accessing Hash Elements
The Problem
Some modules look directly at hash keys on the Test::Builder singleton. The problem here
is that the Test::Builder singleton no longer holds anything important.
The Fix
The fix is to use the API specified in Test2::API to look at or modify state as needed.
Subtest indentation
The Problem
An early change, in fact the change that made Test2 an idea, was a change to the
indentation of the subtest note. It was decided it would be more readable to outdent the
subtest note instead of having it inline with the subtest:
# subtest foo
ok 1 - blah
1..1
ok 1 - subtest foo
The old style indented the note:
# subtest foo
ok 1 - blah
1..1
ok 1 - subtest foo
This breaks tests that do string comparison of TAP output.
The Fix
my $indent = $INC{'Test2/API.pm'} ? '' : ' ';
is(
$subtest_output,
"${indent}# subtest foo",
"Got subtest note"
);
Check if $INC{'Test2/API.pm'} is set, if it is then no indentation should be expected. If
it is not set, then the old Test::Builder is in use, indentation should be expected.
DISTRIBUTIONS THAT BREAK OR NEED TO BE UPGRADED
This is a list of cpan modules that have been known to have been broken by the upgrade at
one point.
WORKS BUT TESTS WILL FAIL
These modules still function correctly, but their test suites will not pass. If you
already have these modules installed then you can continue to use them. If you are trying
to install them after upgrading Test::Builder you will need to force installation, or
bypass the broken tests.
Test::DBIx::Class::Schema
This module has a test that appears to work around a Test::Builder bug. The bug
appears to have been fixed by Test2, which means the workaround causes a failure. This
can be easily updated, but nobody has done so yet.
Known broken in versions: 1.0.9 and older
Device::Chip
Tests break due to subtest indentation.
Known broken in version 0.07. Apparently works fine in 0.06 though. Patch has been
submitted to fix the issue.
UPGRADE SUGGESTED
These are modules that did not break, but had broken test suites that have since been
fixed.
Test::Exception
Old versions work fine, but have a minor test name behavior that breaks with Test2.
Old versions will no longer install because of this. The latest version on CPAN will
install just fine. Upgrading is not required, but is recommended.
Fixed in version: 0.43
Data::Peek
Some tests depended on $! and $? being modified in subtle ways. A patch was applied to
correct things that changed.
The module itself works fine, there is no need to upgrade.
Fixed in version: 0.45
circular::require
Some tests were fragile and required base.pm to be loaded at a late stage. Test2 was
loading base.pm too early. The tests were updated to fix this.
The module itself never broke, you do not need to upgrade.
Fixed in version: 0.12
Test::Module::Used
A test worked around a now-fixed planning bug. There is no need to upgrade if you have
an old version installed. New versions install fine if you want them.
Fixed in version: 0.2.5
Test::Moose::More
Some tests were fragile, but have been fixed. The actual breakage was from the subtest
comment indentation change.
No need to upgrade, old versions work fine. Only new versions will install.
Fixed in version: 0.025
Test::FITesque
This was broken by a bugfix to how planning is done. The test was updated after the
bugfix.
Fixed in version: 0.04
Test::Kit
Old versions work fine, but would not install because Test::Aggregate was in the
dependency chain. An upgrade should not be needed.
Fixed in version: 2.15
autouse
A test broke because it depended on Scalar::Util not being loaded. Test2 loads
Scalar::Util. The test was updated to load Test2 after checking Scalar::Util's load
status.
There is no need to upgrade if you already have it installed.
Fixed in version: 1.11
NEED TO UPGRADE
Test::SharedFork
Old versions need to directly access Test::Builder singleton hash elements. The latest
version on CPAN will still do this on old Test::Builder, but will defer to Test2::IPC
on Test2.
Fixed in version: 0.35
Test::Builder::Clutch
This works by doing overriding methods on the singleton, and directly accessing hash
values on the singleton. A new version has been released that uses the Test2 API to
accomplish the same result in a saner way.
Fixed in version: 0.07
Test::Dist::VersionSync
This had Test::Builder2 conditionals. This was fixed by removing the conditionals.
Fixed in version: 1.1.4
Test::Modern
This relied on "Test::Builder->_try()" which was a private method, documented as
something nobody should use. This was fixed by using a different tool.
Fixed in version: 0.012
Test::UseAllModules
Version 0.14 relied on "Test::Builder->history" which was available in Test::Builder
1.5. Versions 0.12 and 0.13 relied on other Test::Builder internals.
Fixed in version: 0.15
Test::More::Prefix
Worked by applying a role that wrapped "Test::Builder->_print_comment". Fixed by
adding an event filter that modifies the message instead when running under Test2.
Fixed in version: 0.007
STILL BROKEN
Test::Aggregate
This distribution directly accesses the hash keys in the Test::Builder singleton. It
also approaches the problem from the wrong angle, please consider using
Test2::Aggregate for similar functionality and Test2::Harness which allows module
preloading at the harness level.
Still broken as of version: 0.373
Test::Wrapper
This module directly uses hash keys in the Test::Builder singleton. This module is
also obsolete thanks to the benefits of Test2. Use "intercept()" from Test2::API to
achieve a similar result.
Still broken as of version: 0.3.0
Test::ParallelSubtest
This module overrides "Test::Builder::subtest()" and "Test::Builder::done_testing()".
It also directly accesses hash elements of the singleton. It has not yet been fixed.
Alternatives: Test2::AsyncSubtest and Test2::Workflow (not stable).
Still broken as of version: 0.05
Test::Pretty
See https://github.com/tokuhirom/Test-Pretty/issues/25
The author admits the module is crazy, and he is awaiting a stable release of
something new (Test2) to completely rewrite it in a sane way.
Still broken as of version: 0.32
Net::BitTorrent
The tests for this module directly access Test::Builder hash keys. Most, if not all of
these hash keys have public API methods that could be used instead to avoid the
problem.
Still broken in version: 0.052
Test::Group
It monkeypatches Test::Builder, and calls it "black magic" in the code.
Still broken as of version: 0.20
Test::Flatten
This modifies the Test::Builder internals in many ways. A better was to accomplish the
goal of this module is to write your own subtest function.
Still broken as of version: 0.11
Log::Dispatch::Config::TestLog
Modifies Test::Builder internals.
Still broken as of version: 0.02
Test::Able
Modifies Test::Builder internals.
Still broken as of version: 0.11
MAKE ASSERTIONS -> SEND EVENTS
LEGACY
use Test::Builder;
# A majority of tools out there do this:
# my $TB = Test::Builder->new;
# This works, but has always been wrong, forcing Test::Builder to implement
# subtests as a horrific hack. It also causes problems for tools that try
# to replace the singleton (also discouraged).
sub my_ok($;$) {
my ($bool, $name) = @_;
my $TB = Test::Builder->new;
$TB->ok($bool, $name);
}
sub my_diag($) {
my ($msg) = @_;
my $TB = Test::Builder->new;
$TB->diag($msg);
}
TEST2
use Test2::API qw/context/;
sub my_ok($;$) {
my ($bool, $name) = @_;
my $ctx = context();
$ctx->ok($bool, $name);
$ctx->release;
}
sub my_diag($) {
my ($msg) = @_;
my $ctx = context();
$ctx->diag($msg);
$ctx->release;
}
The context object has API compatible implementations of the following methods:
ok($bool, $name)
diag(@messages)
note(@messages)
subtest($name, $code)
If you are looking for helpers with "is", "like", and others, see Test2::Suite.
WRAP EXISTING TOOLS
LEGACY
use Test::More;
sub exclusive_ok {
my ($bool1, $bool2, $name) = @_;
# Ensure errors are reported 1 level higher
local $Test::Builder::Level = $Test::Builder::Level + 1;
$ok = $bool1 || $bool2;
$ok &&= !($bool1 && $bool2);
ok($ok, $name);
return $bool;
}
Every single tool in the chain from this, to "ok", to anything "ok" calls needs to
increment the $Level variable. When an error occurs Test::Builder will do a trace to the
stack frame determined by $Level, and report that file+line as the one where the error
occurred. If you or any other tool you use forgets to set $Level then errors will be
reported to the wrong place.
TEST2
use Test::More;
sub exclusive_ok {
my ($bool1, $bool2, $name) = @_;
# Grab and store the context, even if you do not need to use it
# directly.
my $ctx = context();
$ok = $bool1 || $bool2;
$ok &&= !($bool1 && $bool2);
ok($ok, $name);
$ctx->release;
return $bool;
}
Instead of using $Level to perform a backtrace, Test2 uses a context object. In this
sample you create a context object and store it. This locks the context (errors report 1
level up from here) for all wrapped tools to find. You do not need to use the context
object, but you do need to store it in a variable. Once the sub ends the $ctx variable is
destroyed which lets future tools find their own.
USING UTF8
LEGACY
# Set the mode BEFORE anything loads Test::Builder
use open ':std', ':encoding(utf8)';
use Test::More;
Or
# Modify the filehandles
my $builder = Test::More->builder;
binmode $builder->output, ":encoding(utf8)";
binmode $builder->failure_output, ":encoding(utf8)";
binmode $builder->todo_output, ":encoding(utf8)";
TEST2
use Test2::API qw/test2_stack/;
test2_stack->top->format->encoding('utf8');
Though a much better way is to use the Test2::Plugin::UTF8 plugin, which is part of
Test2::Suite.
AUTHORS, CONTRIBUTORS AND REVIEWERS
The following people have all contributed to this document in some way, even if only for
review.
Chad Granum (EXODIST) <exodist@cpan.org>
SOURCE
The source code repository for Test2 can be found at
http://github.com/Test-More/test-more/.
MAINTAINER
Chad Granum <exodist@cpan.org>
COPYRIGHT
Copyright 2020 Chad Granum <exodist@cpan.org>.
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
See http://www.perl.com/perl/misc/Artistic.html