Provided by: tklib_0.8~20230222-1_all 
NAME
canvas::edit::points - Editing a cloud of points on a canvas
SYNOPSIS
package require Tcl 8.5
package require Tk 8.5
package require canvas::edit::points ?0.3?
::canvas::edit points objectName canvas options...
objectName destroy
objectName enable
objectName disable
objectName active
objectName add x y
objectName clear
activeCmd editorObj id
createCmd canvas x y
dataCmd add editorObj id x y
dataCmd remove editorObj id
dataCmd move start editorObj id
dataCmd move delta editorObj id x y dx dy
dataCmd move done editorObj id
_________________________________________________________________________________________________
DESCRIPTION
This package provides a class whose instances handle editing a cloud of point markers on a
canvas. Instances can be configured with regard to the visual appearance of markers. Note
that instances do not store the edited points themselves, but delegate this to a
configurable object.
INTERACTION
The default bindings enable the creation, removal and dragging of point (markers) using
the mouse buttons 1, 2, and 3. Specifically:
[1] Clicking anywhere with button 1 adds a new point.
[2] Clicking on a point with button 2 removes that point.
[3] Clicking on a point with button 3 starts a drag operation ending with the release
of the button.
The option -drag-point can be used to change the button used to initiate drag operations.
Note that the option value may not only contain the button number, but also modifier
prefix separated from the button by a dash "-". The recognized modifiers are Control,
Shift, and Alt.
The option -add-remove-point can be used to change the button used to add/remove points.
This works because removal is an item binding, while adding is canvas global. The option
recognizes the same syntax for button as -drag-point.
In the standard configuration the canvas item representing a point is a circle configured
using the appearance options -color, -hilit-color, and -radius. Their defaults are
Skyblue2, red, and 3, repsectively.
The option -kind can be used to slightly customize the canvas item to any kind accepting
the item options -width, -outline, -fill, and -activefill.
For more extensive customization its is necessary to configure a creation callback using
option -create-cmd. The callback takes the canvas and x. y coordinates as arguments, in
this order, and is expected to return a list of the canvas items representing the point.
Note the plural. With the callback it is possible to visualize a point using a group of
items.
Further note that when the callback return an empty list no point is created. In other
words, the callback can also be used to perform checks if a point at the given location is
desirable, or not. This can be combined with the default creation behaviour as the option
can be queried, and its default value is the callback for the default behaviour.
Keeping with the callback for a bit, the option -active-cmd sets a callback invoked
whenever the mouse is over one of the created points, i.e. active. This can be used to
drive derived displays. For example highlighting the point's entry in a table or other
widget.
The last option of importance is -tag. Its value is the name of the canvas tag used to
mark all the items owned, i.e. created and managed by an. The default is POINT.
When attaching multiple instances of this behaviour to the same canvas each instance has
to be configured with a unique tag, to prevent them from interfering with each other.
CLASS API
::canvas::edit points objectName canvas options...
This, the class command, creates and configures a new instance of a point cloud
editor, named objectName. The instance will be connected to the specified canvas
widget.
The result of the command is the fully qualified name of the instance command.
The options accepted here, and their values, are explained in the section Options.
INSTANCE API
Instances of the point cloud editors provide the following API:
objectName destroy
This method destroys the point cloud editor and releases all its internal
resources.
Note that this operation does not destroy the items of the point markers the editor
managed on the attached canvas, nor the canvas itself.
The result of the method is an empty string.
objectName enable
This method activates editing of the point cloud on the canvas. This is the default
after instance creation. A call is ignored if the editor is already active.
The result of the method is an empty string.
The complementary method is disable. The interogatory method for the current state
is active.
objectName disable
This method disables editing of the point cloud on the canvas. A call is ignored if
the editor is already disabled.
The result of the method is an empty string.
The complementary method is enable. The interogatory method for the current state
is active.
objectName active
This method queries the editor state.
The result of the method is a boolean value, true if the editor is active, and
false otherwise, i.e. disabled.
The methods to change the state are enable and disable.
objectName add x y
This method programmatically creates a point at the specified location.
The result of the method is an empty string.
Note that this method goes through the whole set of callbacks invoked when the user
interactively creates a point, i.e. -create-cmd, and, more importantly, -data-cmd.
This is the method through which to load pre-existing points into an editor
instance.
objectName clear
This method programmatically removes all points from the editor.
The result of the method is an empty string.
Note that this method goes through the same callback invoked when the user
interactively removes a point, i.e. -data-cmd.
OPTIONS
The class command accepts the following options
-active-cmd command-prefix
The value of this option is a command prefix the editor will invoke when the mouse
enters or leaves a point managed by the instance.
If not specified it defaults to an empty command which does nothing.
The signature of this command prefix is
activeCmd editorObj id
The id identifies the point within the editor.
An empty id indicates that the last entered point was left.
The result of this method is ignored.
-add-remove-point eventspec
The value of this option is an event specification (without bracketing angles)
declaring which event will trigger adding and removing a point.
This option can only be set at construction time.
The default setup uses different events for adding and removing points,
ButtonPress-1 and ButtonPress-2 respectively.
When using this option the same event is used for both operations. This is no
problem because adding is bound as canvas-global event while removal is bound to
the relevant canvas items.
-color colorspec
The value of this option is the fill color for the default item created when adding
a point, and no -create-cmd is specified.
The default value is SkyBlue2.
-create-cmd command-prefix
The value of this option is a command prefix the editor will invoke when it has to
create a new point.
While this option can be set after construction, it is recommended to use this
feature only as a means of inserting custom processing to be done at creation time
which remembers and calls the previous value of the option.
If not specified it defaults to a command which will create a black-bordered blue
circle of radius 3 centered on the location of the new point.
The signature of this command prefix is
createCmd canvas x y
The result of the command prefix must be a list of the canvas items it
created to represent the marker. Note here that the visual representation of
a "point" may consist of multiple canvas items in an arbitrary shape.
The returned list of items is allowed to be empty, and such is taken as
signal that the callback vetoed the creation of the point.
-data-cmd command-prefix
The value of this option is a command prefix the editor will invoke when a point
was edited in some way. This is how the editor delegates the actual storage of
point information to an outside object.
This option can only be set at construction time.
If not specified it defaults to an empty string and is ignored by the editor, i.e.
not invoked.
The signatures of this command prefix are
dataCmd add editorObj id x y
This callback is invoked when a new point was added to the instance, either
interactively, or programmatically. See instance method add for the latter.
The id identifies the point within the editor and will be used by the two
other callbacks to specify which point to modify.
The last two arguments x and y specify the location of the new point in
canvas coordinates.
The result of this method is ignored.
dataCmd remove editorObj id
This callback is invoked when a point removed from the editor instance.
The id identifies the removed point within the editor.
The result of this method is ignored.
dataCmd move start editorObj id
This callback is invoked when the movement of a point in the editor instance
has started.
The id identifies the point within the editor about to be moved.
The result of this method is ignored.
dataCmd move delta editorObj id x y dx dy
This callback is invoked when the point moved in the editor instance.
The id identifies the moved point within the editor, and the remaining
arguments x, y, dx, and dy provide the new absolute location of the point,
and full delta to the original location.
At the time of the calls the system is not committed to the move yet. Only
after method move done was invoked and has accepted or rejected the last
position will the editor update its internal data structures, either
committing to the new location, or rolling the move back to the original
one.
Given this the location data provided here should be saved only in temporary
storage until then.
The result of this method is ignored.
dataCmd move done editorObj id
This callback is invoked when the movement of a point in the editor instance
is complete.
The id identifies the moved point within the editor.
The result of this method must be a boolean value. If the method returns
false the move is vetoed and rollbed back.
-drag-point eventspec
The value of this option is an event specification (without bracketing angles)
declaring which event will trigger a drag action on points.
This option can only be set at construction time.
The default specification is ButtonPress-3.
-hilit-color colorspec
The value of this option is the highlight color for the default item created when
adding a point, and no -highlight-cmd is specified.
The default value is red.
-kind name
The value of this option is the canvas item type for the default item created when
adding a point, and no -create-cmd is specified. Only item types specified through
a bounding box are suitable.
The default value is oval.
-radius int
The value of this option is the radius for the default item created when adding a
point, and no -create-cmd is specified.
The default value is 3.
-tag string
The value of this option is the name of the canvas tag with which to identify all
items of all points managed by the editor.
This option can only be set at construction time.
If not specified it defaults to POINT
BUGS, IDEAS, FEEDBACK
This document, and the package it describes, will undoubtedly contain bugs and other
problems. Please report such in the category canvas of the Tklib Trackers
[http://core.tcl.tk/tklib/reportlist]. Please also report any ideas for enhancements you
may have for either package and/or documentation.
KEYWORDS
canvas, editing, point cloud, points