Provided by: tcl8.6-doc_8.6.13+dfsg-2_all 
NAME
format - Format a string in the style of sprintf
SYNOPSIS
format formatString ?arg arg ...?
_________________________________________________________________________________________________
INTRODUCTION
This command generates a formatted string in a fashion similar to the ANSI C sprintf
procedure. FormatString indicates how to format the result, using % conversion specifiers
as in sprintf, and the additional arguments, if any, provide values to be substituted into
the result. The return value from format is the formatted string.
DETAILS ON FORMATTING
The command operates by scanning formatString from left to right. Each character from the
format string is appended to the result string unless it is a percent sign. If the
character is a % then it is not copied to the result string. Instead, the characters
following the % character are treated as a conversion specifier. The conversion specifier
controls the conversion of the next successive arg to a particular format and the result
is appended to the result string in place of the conversion specifier. If there are
multiple conversion specifiers in the format string, then each one controls the conversion
of one additional arg. The format command must be given enough args to meet the needs of
all of the conversion specifiers in formatString.
Each conversion specifier may contain up to six different parts: an XPG3 position
specifier, a set of flags, a minimum field width, a precision, a size modifier, and a
conversion character. Any of these fields may be omitted except for the conversion
character. The fields that are present must appear in the order given above. The
paragraphs below discuss each of these fields in turn.
OPTIONAL POSITIONAL SPECIFIER
If the % is followed by a decimal number and a $, as in “%2$d”, then the value to convert
is not taken from the next sequential argument. Instead, it is taken from the argument
indicated by the number, where 1 corresponds to the first arg. If the conversion
specifier requires multiple arguments because of * characters in the specifier then
successive arguments are used, starting with the argument given by the number. This
follows the XPG3 conventions for positional specifiers. If there are any positional
specifiers in formatString then all of the specifiers must be positional.
OPTIONAL FLAGS
The second portion of a conversion specifier may contain any of the following flag
characters, in any order:
- Specifies that the converted argument should be left-justified in its field
(numbers are normally right-justified with leading spaces if needed).
+ Specifies that a number should always be printed with a sign, even if positive.
space Specifies that a space should be added to the beginning of the number if the
first character is not a sign.
0 Specifies that the number should be padded on the left with zeroes instead of
spaces.
# Requests an alternate output form. For o conversions it guarantees that the
first digit is always 0. For x or X conversions, 0x or 0X (respectively) will
be added to the beginning of the result unless it is zero. For b conversions,
0b will be added to the beginning of the result unless it is zero. For all
floating-point conversions (e, E, f, g, and G) it guarantees that the result
always has a decimal point. For g and G conversions it specifies that trailing
zeroes should not be removed.
OPTIONAL FIELD WIDTH
The third portion of a conversion specifier is a decimal number giving a minimum field
width for this conversion. It is typically used to make columns line up in tabular
printouts. If the converted argument contains fewer characters than the minimum field
width then it will be padded so that it is as wide as the minimum field width. Padding
normally occurs by adding extra spaces on the left of the converted argument, but the 0
and - flags may be used to specify padding with zeroes on the left or with spaces on the
right, respectively. If the minimum field width is specified as * rather than a number,
then the next argument to the format command determines the minimum field width; it must
be an integer value.
OPTIONAL PRECISION/BOUND
The fourth portion of a conversion specifier is a precision, which consists of a period
followed by a number. The number is used in different ways for different conversions.
For e, E, and f conversions it specifies the number of digits to appear to the right of
the decimal point. For g and G conversions it specifies the total number of digits to
appear, including those on both sides of the decimal point (however, trailing zeroes after
the decimal point will still be omitted unless the # flag has been specified). For
integer conversions, it specifies a minimum number of digits to print (leading zeroes will
be added if necessary). For s conversions it specifies the maximum number of characters
to be printed; if the string is longer than this then the trailing characters will be
dropped. If the precision is specified with * rather than a number then the next argument
to the format command determines the precision; it must be a numeric string.
OPTIONAL SIZE MODIFIER
The fifth part of a conversion specifier is a size modifier, which must be ll, h, or l.
If it is ll it specifies that an integer value is taken without truncation for conversion
to a formatted substring. If it is h it specifies that an integer value is truncated to a
16-bit range before converting. This option is rarely useful. If it is l it specifies
that the integer value is truncated to the same range as that produced by the wide()
function of the expr command (at least a 64-bit range). If neither h nor l are present,
the integer value is truncated to the same range as that produced by the int() function of
the expr command (at least a 32-bit range, but determined by the value of the wordSize
element of the tcl_platform array).
MANDATORY CONVERSION TYPE
The last thing in a conversion specifier is an alphabetic character that determines what
kind of conversion to perform. The following conversion characters are currently
supported:
d Convert integer to signed decimal string.
u Convert integer to unsigned decimal string.
i Convert integer to signed decimal string (equivalent to d).
o Convert integer to unsigned octal string.
x or X Convert integer to unsigned hexadecimal string, using digits “0123456789abcdef”
for x and “0123456789ABCDEF” for X).
b Convert integer to unsigned binary string, using digits 0 and 1.
c Convert integer to the Unicode character it represents.
s No conversion; just insert string.
f Convert number to signed decimal string of the form xx.yyy, where the number of
y's is determined by the precision (default: 6). If the precision is 0 then no
decimal point is output.
e or E Convert number to scientific notation in the form x.yyye±zz, where the number of
y's is determined by the precision (default: 6). If the precision is 0 then no
decimal point is output. If the E form is used then E is printed instead of e.
g or G If the exponent is less than -4 or greater than or equal to the precision, then
convert number as for %e or %E. Otherwise convert as for %f. Trailing zeroes
and a trailing decimal point are omitted.
% No conversion: just insert %.
DIFFERENCES FROM ANSI SPRINTF
The behavior of the format command is the same as the ANSI C sprintf procedure except for
the following differences:
[1] Tcl guarantees that it will be working with UNICODE characters.
[2] %p and %n specifiers are not supported.
[3] For %c conversions the argument must be an integer value, which will then be
converted to the corresponding character value.
[4] The size modifiers are ignored when formatting floating-point values. The ll
modifier has no sprintf counterpart. The b specifier has no sprintf counterpart.
EXAMPLES
Convert the numeric value of a UNICODE character to the character itself:
set value 120
set char [format %c $value]
Convert the output of time into seconds to an accuracy of hundredths of a second:
set us [lindex [time $someTclCode] 0]
puts [format "%.2f seconds to execute" [expr {$us / 1e6}]]
Create a packed X11 literal color specification:
# Each color-component should be in range (0..255)
set color [format "#%02x%02x%02x" $r $g $b]
Use XPG3 format codes to allow reordering of fields (a technique that is often used in
localized message catalogs; see msgcat) without reordering the data values passed to
format:
set fmt1 "Today, %d shares in %s were bought at $%.2f each"
puts [format $fmt1 123 "Global BigCorp" 19.37]
set fmt2 "Bought %2\$s equity ($%3$.2f x %1\$d) today"
puts [format $fmt2 123 "Global BigCorp" 19.37]
Print a small table of powers of three:
# Set up the column widths
set w1 5
set w2 10
# Make a nice header (with separator) for the table first
set sep +-[string repeat - $w1]-+-[string repeat - $w2]-+
puts $sep
puts [format "| %-*s | %-*s |" $w1 "Index" $w2 "Power"]
puts $sep
# Print the contents of the table
set p 1
for {set i 0} {$i<=20} {incr i} {
puts [format "| %*d | %*ld |" $w1 $i $w2 $p]
set p [expr {wide($p) * 3}]
}
# Finish off by printing the separator again
puts $sep
SEE ALSO
scan(3tcl), sprintf(3), string(3tcl)
KEYWORDS
conversion specifier, format, sprintf, string, substitution