Provided by: avr-libc_2.0.0+Atmel3.6.2-3_all 
NAME
install_tools - Building and Installing the GNU Tool Chain
This chapter shows how to build and install, from source code, a complete development
environment for the AVR processors using the GNU toolset. There are two main sections, one
for Linux, FreeBSD, and other Unix-like operating systems, and another section for
Windows.
Building and Installing under Linux, FreeBSD, and Others
The default behaviour for most of these tools is to install every thing under the
/usr/local directory. In order to keep the AVR tools separate from the base system, it is
usually better to install everything into /usr/local/avr. If the /usr/local/avr directory
does not exist, you should create it before trying to install anything. You will need root
access to install there. If you don't have root access to the system, you can
alternatively install in your home directory, for example, in $HOME/local/avr. Where you
install is a completely arbitrary decision, but should be consistent for all the tools.
You specify the installation directory by using the --prefix=dir option with the configure
script. It is important to install all the AVR tools in the same directory or some of the
tools will not work correctly. To ensure consistency and simplify the discussion, we will
use $PREFIX to refer to whatever directory you wish to install in. You can set this as an
environment variable if you wish as such (using a Bourne-like shell):
$ PREFIX=$HOME/local/avr
$ export PREFIX
Note
Be sure that you have your PATH environment variable set to search the directory you
install everything in before you start installing anything. For example, if you use
--prefix=$PREFIX, you must have $PREFIX/bin in your exported PATH. As such:
$ PATH=$PATH:$PREFIX/bin
$ export PATH
Warning
If you have CC set to anything other than avr-gcc in your environment, this will cause
the configure script to fail. It is best to not have CC set at all.
Note
It is usually the best to use the latest released version of each of the tools.
Required Tools
• GNU Binutils
http://sources.redhat.com/binutils/
Installation
• GCC
http://gcc.gnu.org/
Installation
• AVR LibC
http://savannah.gnu.org/projects/avr-libc/
Installation
Optional Tools
You can develop programs for AVR devices without the following tools. They may or may not
be of use for you.
• AVRDUDE
http://savannah.nongnu.org/projects/avrdude/
Installation
Usage Notes
• GDB
http://sources.redhat.com/gdb/
Installation
• SimulAVR
http://savannah.gnu.org/projects/simulavr/
Installation
• AVaRICE
http://avarice.sourceforge.net/
Installation
GNU Binutils for the AVR target
The binutils package provides all the low-level utilities needed in building and
manipulating object files. Once installed, your environment will have an AVR assembler
(avr-as), linker (avr-ld), and librarian (avr-ar and avr-ranlib). In addition, you get
tools which extract data from object files (avr-objcopy), dissassemble object file
information (avr-objdump), and strip information from object files (avr-strip). Before we
can build the C compiler, these tools need to be in place.
Download and unpack the source files:
$ bunzip2 -c binutils-<version>.tar.bz2 | tar xf -
$ cd binutils-<version>
Note
Replace <version> with the version of the package you downloaded.
If you obtained a gzip compressed file (.gz), use gunzip instead of bunzip2.
It is usually a good idea to configure and build binutils in a subdirectory so as not to
pollute the source with the compiled files. This is recommended by the binutils
developers.
$ mkdir obj-avr
$ cd obj-avr
The next step is to configure and build the tools. This is done by supplying arguments to
the configure script that enable the AVR-specific options.
$ ../configure --prefix=$PREFIX --target=avr --disable-nls
If you don't specify the --prefix option, the tools will get installed in the /usr/local
hierarchy (i.e. the binaries will get installed in /usr/local/bin, the info pages get
installed in /usr/local/info, etc.) Since these tools are changing frequently, It is
preferrable to put them in a location that is easily removed.
When configure is run, it generates a lot of messages while it determines what is
available on your operating system. When it finishes, it will have created several
Makefiles that are custom tailored to your platform. At this point, you can build the
project.
$ make
Note
BSD users should note that the project's Makefile uses GNU make syntax. This means
FreeBSD users may need to build the tools by using gmake.
If the tools compiled cleanly, you're ready to install them. If you specified a
destination that isn't owned by your account, you'll need root access to install them. To
install:
$ make install
You should now have the programs from binutils installed into $PREFIX/bin. Don't forget to
set your PATH environment variable before going to build avr-gcc.
GCC for the AVR target
Warning
You must install avr-binutils and make sure your path is set properly before
installing avr-gcc.
The steps to build avr-gcc are essentially same as for binutils:
$ bunzip2 -c gcc-<version>.tar.bz2 | tar xf -
$ cd gcc-<version>
$ mkdir obj-avr
$ cd obj-avr
$ ../configure --prefix=$PREFIX --target=avr --enable-languages=c,c++ --disable-nls --disable-libssp --with-dwarf2
$ make
$ make install
To save your self some download time, you can alternatively download only the gcc-
core-<version>.tar.bz2 and gcc-c++-<version>.tar.bz2 parts of the gcc. Also, if you don't
need C++ support, you only need the core part and should only enable the C language
support. (Starting with GCC 4.7 releases, these split files are no longer available
though.)
Note
Early versions of these tools did not support C++.
The stdc++ libs are not included with C++ for AVR due to the size limitations of the
devices.
AVR LibC
Warning
You must install avr-binutils, avr-gcc and make sure your path is set properly before
installing avr-libc.
Note
If you have obtained the latest avr-libc from cvs, you will have to run the bootstrap
script before using either of the build methods described below.
To build and install avr-libc:
$ gunzip -c avr-libc-<version>.tar.gz | tar xf -
$ cd avr-libc-<version>
$ ./configure --prefix=$PREFIX --build=`./config.guess` --host=avr
$ make
$ make install
Optionally, generation of debug information can be requested with:
$ gunzip -c avr-libc-<version>.tar.gz | tar xf -
$ cd avr-libc-<version>
$ ./configure --prefix=$PREFIX --build=`./config.guess` --host=avr --with-debug-info=DEBUG_INFO
$ make
$ make install
where DEBUG_INFO can be one of stabs, dwarf-2, or dwarf-4.
The default is to not generate any debug information, which is suitable for binary
distributions of avr-libc, where the user does not have the source code installed the
debug information would refer to.
AVRDUDE
Note
It has been ported to windows (via MinGW or cygwin), Linux and Solaris. Other Unix
systems should be trivial to port to.
avrdude is part of the FreeBSD ports system. To install it, simply do the following:
# cd /usr/ports/devel/avrdude
# make install
Note
Installation into the default location usually requires root permissions. However,
running the program only requires access permissions to the appropriate ppi(4) device.
Building and installing on other systems should use the configure system, as such:
$ gunzip -c avrdude-<version>.tar.gz | tar xf -
$ cd avrdude-<version>
$ mkdir obj-avr
$ cd obj-avr
$ ../configure --prefix=$PREFIX
$ make
$ make install
GDB for the AVR target
GDB also uses the configure system, so to build and install:
$ bunzip2 -c gdb-<version>.tar.bz2 | tar xf -
$ cd gdb-<version>
$ mkdir obj-avr
$ cd obj-avr
$ ../configure --prefix=$PREFIX --target=avr
$ make
$ make install
Note
If you are planning on using avr-gdb, you will probably want to install either
simulavr or avarice since avr-gdb needs one of these to run as a a remote target
backend.
SimulAVR
SimulAVR also uses the configure system, so to build and install:
$ gunzip -c simulavr-<version>.tar.gz | tar xf -
$ cd simulavr-<version>
$ mkdir obj-avr
$ cd obj-avr
$ ../configure --prefix=$PREFIX
$ make
$ make install
Note
You might want to have already installed avr-binutils, avr-gcc and avr-libc if you
want to have the test programs built in the simulavr source.
AVaRICE
Note
These install notes are not applicable to avarice-1.5 or older. You probably don't
want to use anything that old anyways since there have been many improvements and bug
fixes since the 1.5 release.
AVaRICE also uses the configure system, so to build and install:
$ gunzip -c avarice-<version>.tar.gz | tar xf -
$ cd avarice-<version>
$ mkdir obj-avr
$ cd obj-avr
$ ../configure --prefix=$PREFIX
$ make
$ make install
Note
AVaRICE uses the BFD library for accessing various binary file formats. You may need
to tell the configure script where to find the lib and headers for the link to work.
This is usually done by invoking the configure script like this (Replace <hdr_path>
with the path to the bfd.h file on your system. Replace <lib_path> with the path to
libbfd.a on your system.):
$ CPPFLAGS=-I<hdr_path> LDFLAGS=-L<lib_path> ../configure --prefix=$PREFIX
Building and Installing under Windows
Building and installing the toolchain under Windows requires more effort because all of
the tools required for building, and the programs themselves, are mainly designed for
running under a POSIX environment such as Unix and Linux. Windows does not natively
provide such an environment.
There are two projects available that provide such an environment, Cygwin and MinGW. There
are advantages and disadvantages to both. Cygwin provides a very complete POSIX
environment that allows one to build many Linux based tools from source with very little
or no source modifications. However, POSIX functionality is provided in the form of a DLL
that is linked to the application. This DLL has to be redistributed with your application
and there are issues if the Cygwin DLL already exists on the installation system and
different versions of the DLL. On the other hand, MinGW can compile code as native Win32
applications. However, this means that programs designed for Unix and Linux (i.e. that use
POSIX functionality) will not compile as MinGW does not provide that POSIX layer for you.
Therefore most programs that compile on both types of host systems, usually must provide
some sort of abstraction layer to allow an application to be built cross-platform.
MinGW does provide somewhat of a POSIX environment, called MSYS, that allows you to build
Unix and Linux applications as they woud normally do, with a configure step and a make
step. Cygwin also provides such an environment. This means that building the AVR toolchain
is very similar to how it is built in Linux, described above. The main differences are in
what the PATH environment variable gets set to, pathname differences, and the tools that
are required to build the projects under Windows. We'll take a look at the tools next.
Tools Required for Building the Toolchain for Windows
These are the tools that are currently used to build an AVR tool chain. This list may
change, either the version of the tools, or the tools themselves, as improvements are
made.
• MinGW
Download the MinGW Automated Installer, 20100909 (or later)
http://sourceforge.net/projects/mingw/files/Automated%20MinGW%20Installer/mingw-get-
inst/mingw-get-inst-20100909/mingw-get-inst-20100909.exe/download
• Run mingw-get-inst-20100909.exe
• In the installation wizard, keep the default values and press the 'Next' button for
all installer pages except for the pages explicitly listed below.
• In the installer page 'Repository Catalogues', select the 'Download latest
repository catalogues' radio button, and press the 'Next' button
• In the installer page 'License Agreement', select the 'I accept the agreement' radio
button, and press the 'Next' button
• In the installer page 'Select Components', be sure to select these items:
• C compiler (default checked)
• C++ compiler
• Ada compiler
• MinGW Developer Toolkit (which includes 'MSYS Basic System').
• Install.
• Install Cygwin
• Install everything, all users, UNIX line endings. This will take a *long* time. A fat
internet pipe is highly recommended. It is also recommended that you download all to a
directory first, and then install from that directory to your machine.
Note
GMP, MPFR, and MPC are required to build GCC.
GMP is a prequisite for building MPFR. Build GMP first.
MPFR is a prerequisite for building MPC. Build MPFR second.
• Build GMP for MinGW
• Latest Version
• http://gmplib.org/
• Build script:
./configure 2>&1 | tee gmp-configure.log
make 2>&1 | tee gmp-make.log
make check 2>&1 | tee gmp-make-check.log
make install 2>&1 | tee gmp-make-install.log
• GMP headers will be installed under /usr/local/include and library installed under
/usr/local/lib.
• Build MPFR for MinGW
• Latest Version
• http://www.mpfr.org/
• Build script:
./configure --with-gmp=/usr/local --disable-shared 2>&1 | tee mpfr-configure.log
make 2>&1 | tee mpfr-make.log
make check 2>&1 | tee mpfr-make-check.log
make install 2>&1 | tee mpfr-make-install.log
• MPFR headers will be installed under /usr/local/include and library installed under
/usr/local/lib.
• Build MPC for MinGW
• Latest Version
• http://www.multiprecision.org/
• Build script:
./configure --with-gmp=/usr/local --with-mpfr=/usr/local --disable-shared 2>&1 | tee mpfr-configure.log
make 2>&1 | tee mpfr-make.log
make check 2>&1 | tee mpfr-make-check.log
make install 2>&1 | tee mpfr-make-install.log
• MPFR headers will be installed under /usr/local/include and library installed under
/usr/local/lib.
Note
Doxygen is required to build AVR-LibC documentation.
• Install Doxygen
• Version 1.7.2
• http://www.stack.nl/~dimitri/doxygen/
• Download and install.
NetPBM is required to build graphics in the AVR-LibC documentation.
• Install NetPBM
• Version 10.27.0
• From the GNUWin32 project: http://gnuwin32.sourceforge.net/packages.html
• Download and install.
fig2dev is required to build graphics in the AVR-LibC documentation.
• Install fig2dev
• Version 3.2 patchlevel 5c
• From WinFig 4.62: http://www.schmidt-web-berlin.de/winfig/
• Download the zip file version of WinFig
• Unzip the download file and install fig2dev.exe in a location of your choice,
somewhere in the PATH.
• You may have to unzip and install related DLL files for fig2dev. In the version
above, you have to install QtCore4.dll and QtGui4.dll.
MikTeX is required to build various documentation.
• Install MiKTeX
• Version 2.9
• http://miktex.org/
• Download and install.
Ghostscript is required to build various documentation.
• Install Ghostscript
• Version 9.00
• http://www.ghostscript.com
• Download and install.
• In the \bin subdirectory of the installaion, copy gswin32c.exe to gs.exe.
• Set the TEMP and TMP environment variables to c:\temp or to the short filename
version. This helps to avoid NTVDM errors during building.
Building the Toolchain for Windows
All directories in the PATH enviornment variable should be specified using their short
filename (8.3) version. This will also help to avoid NTVDM errors during building. These
short filenames can be specific to each machine.
Build the tools below in MinGW/MSYS.
• Binutils
• Open source code pacakge and patch as necessary.
• Configure and build in a directory outside of the source code tree.
• Set PATH, in order:
• <MikTex executables>
• <ghostscript executables>
• /usr/local/bin
• /usr/bin
• /bin
• /mingw/bin
• c:/cygwin/bin
• <install directory>/bin
• Configure
CFLAGS=-D__USE_MINGW_ACCESS ../$archivedir/configure --prefix=$installdir --target=avr --disable-nls --enable-doc --datadir=$installdir/doc/binutils --with-gmp=/usr/local --with-mpfr=/usr/local 2>&1 | tee binutils-configure.log
• Make
make all html install install-html 2>&1 | tee binutils-make.log
• Manually change documentation location.
• GCC
• Open source code pacakge and patch as necessary.
• Configure and build in a directory outside of the source code tree.
• Set PATH, in order:
• <MikTex executables>
• <ghostscript executables>
• /usr/local/bin
• /usr/bin
• /bin
• /mingw/bin
• c:/cygwin/bin
• <install directory>/bin
• Configure
LDFLAGS='-L /usr/local/lib -R /usr/local/lib' CFLAGS='-D__USE_MINGW_ACCESS' ../gcc-$version/configure --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --prefix=$installdir --target=$target --enable-languages=c,c++ --with-dwarf2 --enable-doc --with-docdir=$installdir/doc/$project --disable-shared --disable-libada --disable-libssp 2>&1 | tee $project-configure.log
• Make
make all html install 2>&1 | tee $package-make.log
• avr-libc
• Open source code package.
• Configure and build at the top of the source code tree.
• Set PATH, in order:
• /usr/local/bin
• /mingw/bin
• /bin
• <MikTex executables>
• <install directory>/bin
• <Doxygen executables>
• <NetPBM executables>
• <fig2dev executable>
• <Ghostscript executables>
• c:/cygwin/bin
• Configure
./configure --host=avr --prefix=$installdir --enable-doc --disable-versioned-doc --enable-html-doc --enable-xml-doc --enable-pdf-doc --enable-man-doc --mandir=$installdir/man --datadir=$installdir 2>&1 | tee $package-configure.log
• Make
make all install 2>&1 | tee $package-make.log
• Manually change location of man page documentation.
• Move the examples to the top level of the install tree.
• Convert line endings in examples to Windows line endings.
• Convert line endings in header files to Windows line endings.
• AVRDUDE
• Open source code package.
• Configure and build at the top of the source code tree.
• Set PATH, in order:
• <MikTex executables>
• /usr/local/bin
• /usr/bin
• /bin
• /mingw/bin
• c:/cygwin/bin
• <install directory>/bin
• Set location of LibUSB headers and libraries
export CPPFLAGS="-I../../libusb-win32-device-bin-$libusb_version/include"
export CFLAGS="-I../../libusb-win32-device-bin-$libusb_version/include"
export LDFLAGS="-L../../libusb-win32-device-bin-$libusb_version/lib/gcc"
• Configure
./configure --prefix=$installdir --datadir=$installdir --sysconfdir=$installdir/bin --enable-doc --disable-versioned-doc 2>&1 | tee $package-configure.log
• Make
make -k all install 2>&1 | tee $package-make.log
• Convert line endings in avrdude config file to Windows line endings.
• Delete backup copy of avrdude config file in install directory if exists.
• Insight/GDB
• Open source code pacakge and patch as necessary.
• Configure and build in a directory outside of the source code tree.
• Set PATH, in order:
• <MikTex executables>
• /usr/local/bin
• /usr/bin
• /bin
• /mingw/bin
• c:/cygwin/bin
• <install directory>/bin
• Configure
CFLAGS=-D__USE_MINGW_ACCESS LDFLAGS='-static' ../$archivedir/configure --prefix=$installdir --target=avr --with-gmp=/usr/local --with-mpfr=/usr/local --enable-doc 2>&1 | tee insight-configure.log
• Make
make all install 2>&1 | tee $package-make.log
• SRecord
• Open source code package.
• Configure and build at the top of the source code tree.
• Set PATH, in order:
• <MikTex executables>
• /usr/local/bin
• /usr/bin
• /bin
• /mingw/bin
• c:/cygwin/bin
• <install directory>/bin
• Configure
./configure --prefix=$installdir --infodir=$installdir/info --mandir=$installdir/man 2>&1 | tee $package-configure.log
• Make
make all install 2>&1 | tee $package-make.log
Build the tools below in Cygwin.
• AVaRICE
• Open source code package.
• Configure and build in a directory outside of the source code tree.
• Set PATH, in order:
• <MikTex executables>
• /usr/local/bin
• /usr/bin
• /bin
• <install directory>/bin
• Set location of LibUSB headers and libraries
export CPPFLAGS=-I$startdir/libusb-win32-device-bin-$libusb_version/include
export CFLAGS=-I$startdir/libusb-win32-device-bin-$libusb_version/include
export LDFLAGS="-static -L$startdir/libusb-win32-device-bin-$libusb_version/lib/gcc "
• Configure
../$archivedir/configure --prefix=$installdir --datadir=$installdir/doc --mandir=$installdir/man --infodir=$installdir/info 2>&1 | tee avarice-configure.log
• Make
make all install 2>&1 | tee avarice-make.log
• SimulAVR
• Open source code package.
• Configure and build in a directory outside of the source code tree.
• Set PATH, in order:
• <MikTex executables>
• /usr/local/bin
• /usr/bin
• /bin
• <install directory>/bin
• Configure
export LDFLAGS="-static"
../$archivedir/configure --prefix=$installdir --datadir=$installdir --disable-tests --disable-versioned-doc 2>&1 | tee simulavr-configure.log
• Make
make -k all install 2>&1 | tee simulavr-make.log
make pdf install-pdf 2>&1 | tee simulavr-pdf-make.log