NAME

       libpfm_intel_hswep_unc_pcu  -  support  for  Intel  Haswell-EP Power Controller Unit (PCU)
       uncore PMU

SYNOPSIS

       #include <perfmon/pfmlib.h>

       PMU name: hswep_unc_pcu
       PMU desc: Intel Haswell-EP PCU uncore PMU

DESCRIPTION

       The library supports the Intel Haswell Power Controller Unit uncore PMU.  This  PMU  model
       only exists on Haswell model 63.

MODIFIERS

       The following modifiers are supported on Intel Haswell PCU uncore PMU:

       e      Enable  edge  detection,  i.e., count only when there is a state transition from no
              occurrence of the event to at least one occurrence. This modifier must be  combined
              with  a  threshold  modifier  (t)  with a value greater or equal to one.  This is a
              boolean modifier.

       t      Set the threshold value. When set to a  non-zero  value,  the  counter  counts  the
              number  of  HA cycles in which the number of occurrences of the event is greater or
              equal to the threshold.  This is an integer  modifier  with  values  in  the  range
              [0:15].

       i      Invert  the  meaning of the threshold or edge filter. If set, the event counts when
              strictly less than N occurrences occur per cycle if threshold is  set  to  N.  When
              invert  is  set,  then  threshold  must be set to non-zero value. If set, the event
              counts when the event transitions from occurring to not  occurring  (falling  edge)
              when edge detection is set. This is a boolean modifier

       ff     Enable   frequency   band   filtering.   This   modifier   applies   only   to  the
              UNC_P_FREQ_BANDx_CYCLES events, where x is [0-3].  The modifiers expects an integer
              in  the  range  [0-255].  The  value  is  interpreted  as  a  frequency value to be
              multiplied by 100Mhz. Thus if the value is 32, then all cycles where the  processor
              is running at 3.2GHz and more are counted.

Frequency band filtering

       There    are    3    events    which    support    frequency   band   filtering,   namely,
       UNC_P_FREQ_BAND0_CYCLES,         UNC_P_FREQ_BAND1_CYCLES,         UNC_P_FREQ_BAND2_CYCLES,
       UNC_P_FREQ_BAND3_CYCLES.  The  frequency  filter (available via the ff modifier) is stored
       into a PMU shared register which hold all 4  possible  frequency  bands,  one  per  event.
       However,  the  library  generate  the  encoding  for  each  event  individually because it
       processes events one at a time. The caller or the underlying kernel interface may have  to
       merge the band filter settings to program the filter register properly.

AUTHORS

       Stephane Eranian <eranian@gmail.com>

                                            May, 2015                                   LIBPFM(3)