Ubuntu Manpage: mlx5dv_wr_set_dc_addr - Attach a DC info to the last work request

Provided by: libibverbs-dev_44.0-2_amd64

NAME

       mlx5dv_wr_set_dc_addr - Attach a DC info to the last work request

       mlx5dv_wr_raw_wqe - Build a raw work request

       mlx5dv_wr_memcpy - Build a DMA memcpy work request

SYNOPSIS

              #include <infiniband/mlx5dv.h>

              static inline void mlx5dv_wr_set_dc_addr(struct mlx5dv_qp_ex *mqp,
                                                       struct ibv_ah *ah,
                                                       uint32_t remote_dctn,
                                                       uint64_t remote_dc_key);

              static inline void mlx5dv_wr_set_dc_addr_stream(struct mlx5dv_qp_ex *mqp,
                                      struct ibv_ah *ah,
                                      uint32_t remote_dctn,
                                      uint64_t remote_dc_key,
                                      uint16_t stream_id);

              struct mlx5dv_mr_interleaved {
                  uint64_t        addr;
                  uint32_t        bytes_count;
                  uint32_t        bytes_skip;
                  uint32_t        lkey;
              };

              static inline void mlx5dv_wr_mr_interleaved(struct mlx5dv_qp_ex *mqp,
                                      struct mlx5dv_mkey *mkey,
                                      uint32_t access_flags, /* use enum ibv_access_flags */
                                      uint32_t repeat_count,
                                      uint16_t num_interleaved,
                                      struct mlx5dv_mr_interleaved *data);

              static inline void mlx5dv_wr_mr_list(struct mlx5dv_qp_ex *mqp,
                                    struct mlx5dv_mkey *mkey,
                                    uint32_t access_flags, /* use enum ibv_access_flags */
                                    uint16_t num_sges,
                                    struct ibv_sge *sge);

              static inline int mlx5dv_wr_raw_wqe(struct mlx5dv_qp_ex *mqp, const void *wqe);

              static inline void mlx5dv_wr_memcpy(struct mlx5dv_qp_ex *mqp_ex,
                                  uint32_t dest_lkey, uint64_t dest_addr,
                                  uint32_t src_lkey, uint64_t src_addr,
                                  size_t length)

DESCRIPTION

       The  MLX5DV  work  request  APIs  (mlx5dv_wr_*)  is  an extension for IBV work request API
       (ibv_wr_*) with mlx5 specific features for send work request.  This may be  used  together
       with or without ibv_wr_* calls.

USAGE

To use these APIs a QP must be created using mlx5dv_create_qp() with send_ops_flags of
struct ibv_qp_init_attr_ex set.

If the QP does not support all the requested work request types then QP creation will
fail.

The mlx5dv_qp_ex is extracted from the IBV_QP by ibv_qp_to_qp_ex() and
mlx5dv_qp_ex_from_ibv_qp_ex(). This should be used to apply the mlx5 specific features on
the posted WR.

A work request creation requires to use the ibv_qp_ex as described in the man for
ibv_wr_post and mlx5dv_qp with its available builders and setters.

QP Specific builders
RC QPs mlx5dv_wr_mr_interleaved()

registers an interleaved memory layout by using an indirect mkey and some
interleaved data. The layout of the memory pointed by the mkey after its
registration will be the data representation for the num_interleaved entries. This
single layout representation is repeated by repeat_count.

The data as described by struct mlx5dv_mr_interleaved will hold real data defined
by bytes_count and then a padding of bytes_skip. Post a successful registration,
RDMA operations can use this mkey. The hardware will scatter the data according to
the pattern. The mkey should be used in a zero-based mode. The addr field in its
ibv_sge is an offset in the total data. To create this mkey mlx5dv_create_mkey()
should be used.

Current implementation requires the IBV_SEND_INLINE option to be on in
ibv_qp_ex->wr_flags field. To be able to have more than 3 num_interleaved entries,
the QP should be created with a larger WQE size that may fit it. This should be
done using the max_inline_data attribute of struct ibv_qp_cap upon its creation.

As one entry will be consumed for strided header, the mkey should be created with
one more entry than the required num_interleaved.

In case ibv_qp_ex->wr_flags turns on IBV_SEND_SIGNALED, the reported WC opcode will
be MLX5DV_WC_UMR. Unregister the mkey to enable another pattern registration
should be done via ibv_post_send with IBV_WR_LOCAL_INV opcode.
mlx5dv_wr_mr_list()

registers a memory layout based on list of ibv_sge. The layout of the memory
pointed by the mkey after its registration will be based on the list of sge counted
by num_sges. Post a successful registration RDMA operations can use this mkey, the
hardware will scatter the data according to the pattern. The mkey should be used
in a zero-based mode, the addr field in its ibv_sge is an offset in the total data.

Current implementation requires the IBV_SEND_INLINE option to be on in
ibv_qp_ex->wr_flags field. To be able to have more than 4 num_sge entries, the QP
should be created with a larger WQE size that may fit it. This should be done
using the max_inline_data attribute of struct ibv_qp_cap upon its creation.

In case ibv_qp_ex->wr_flags turns on IBV_SEND_SIGNALED, the reported WC opcode will
be MLX5DV_WC_UMR. Unregister the mkey to enable other pattern registration should
be done via ibv_post_send with IBV_WR_LOCAL_INV opcode.

RC or DCI QPs
mlx5dv_wr_memcpy()

Builds a DMA memcpy work request to copy data of length length from src_addr to
dest_addr. The copy operation will be done using the DMA MMO functionality of the
device to copy data on PCI bus.

The MLX5DV_QP_EX_WITH_MEMCPY flag in mlx5dv_qp_init_attr.send_ops_flags needs to be
set during QP creation. If the device or QP doesn’t support it then QP creation
will fail. The maximum memcpy length that is supported by the device is reported
in mlx5dv_context->max_wr_memcpy_length. A zero value in
mlx5dv_context->max_wr_memcpy_length means the device doesn’t support memcpy
operations.

IBV_SEND_FENCE indicator should be used on a following send request which is
dependent on dest_addr of the memcpy operation.

In case ibv_qp_ex->wr_flags turns on IBV_SEND_SIGNALED, the reported WC opcode will
be MLX5DV_WC_MEMCPY.

Raw WQE builders
mlx5dv_wr_raw_wqe()
It is used to build a custom work request (WQE) and post it on a normal QP. The
caller needs to set all details of the WQE (except the “ctrl.wqe_index” and
“ctrl.signature” fields, which is the driver’s responsibility to set). The
MLX5DV_QP_EX_WITH_RAW_WQE flag in mlx5_qp_attr.send_ops_flags needs to be set.

The wr_flags are ignored as it’s the caller’s responsibility to set flags in WQE.

No matter what the send opcode is, the work completion opcode for a raw WQE is
IBV_WC_DRIVER2.

QP Specific setters
DCI QPs
mlx5dv_wr_set_dc_addr() must be called to set the DCI WR properties. The
destination address of the work is specified by ah, the remote DCT number is
specified by remote_dctn and the DC key is specified by remote_dc_key. This setter
is available when the QP transport is DCI and send_ops_flags in struct
ibv_qp_init_attr_ex is set. The available builders and setters for DCI QP are the
same as RC QP. DCI QP created with MLX5DV_QP_INIT_ATTR_MASK_DCI_STREAMS can call
mlx5dv_wr_set_dc_addr_stream() to define the stream_id of the operation to allow HW
to choose one of the multiple concurrent DCI resources. Calls to
mlx5dv_wr_set_dc_addr() are equivalent to using stream_id=0

EXAMPLE

              /* create DC QP type and specify the required send opcodes */
              attr_ex.qp_type = IBV_QPT_DRIVER;
              attr_ex.comp_mask |= IBV_QP_INIT_ATTR_SEND_OPS_FLAGS;
              attr_ex.send_ops_flags |= IBV_QP_EX_WITH_RDMA_WRITE;

              attr_dv.comp_mask |= MLX5DV_QP_INIT_ATTR_MASK_DC;
              attr_dv.dc_init_attr.dc_type = MLX5DV_DCTYPE_DCI;

              ibv_qp *qp = mlx5dv_create_qp(ctx, attr_ex, attr_dv);
              ibv_qp_ex *qpx = ibv_qp_to_qp_ex(qp);
              mlx5dv_qp_ex *mqpx = mlx5dv_qp_ex_from_ibv_qp_ex(qpx);

              ibv_wr_start(qpx);

              /* Use ibv_qp_ex object to set WR generic attributes */
              qpx->wr_id = my_wr_id_1;
              qpx->wr_flags = IBV_SEND_SIGNALED;
              ibv_wr_rdma_write(qpx, rkey, remote_addr_1);
              ibv_wr_set_sge(qpx, lkey, local_addr_1, length_1);

              /* Use mlx5 DC setter using mlx5dv_qp_ex object */
              mlx5dv_wr_set_wr_dc_addr(mqpx, ah, remote_dctn, remote_dc_key);

              ret = ibv_wr_complete(qpx);

AUTHOR