Provided by: libpmemobj-dev_1.12.1-2_amd64 
NAME
pmemobj_ctl_get(), pmemobj_ctl_set(), pmemobj_ctl_exec() - Query and modify libpmemobj
internal behavior (EXPERIMENTAL)
SYNOPSIS
#include <libpmemobj.h>
int pmemobj_ctl_get(PMEMobjpool *pop, const char *name, void *arg); (EXPERIMENTAL)
int pmemobj_ctl_set(PMEMobjpool *pop, const char *name, void *arg); (EXPERIMENTAL)
int pmemobj_ctl_exec(PMEMobjpool *pop, const char *name, void *arg); (EXPERIMENTAL)
DESCRIPTION
The pmemobj_ctl_get(), pmemobj_ctl_set() and pmemobj_ctl_exec() functions provide a
uniform interface for querying and modifying the internal behavior of libpmemobj(7)
through the control (CTL) namespace.
The name argument specifies an entry point as defined in the CTL namespace specification.
The entry point description specifies whether the extra arg is required. Those two
parameters together create a CTL query. The functions and the entry points are
thread-safe unless indicated otherwise below. If there are special conditions for calling
an entry point, they are explicitly stated in its description. The functions propagate
the return value of the entry point. If either name or arg is invalid, -1 is returned.
If the provided ctl query is valid, the CTL functions will always return 0 on success and
-1 on failure, unless otherwise specified in the entry point description.
See more in pmem_ctl(5) man page.
CTL NAMESPACE
prefault.at_create | rw | global | int | int | - | boolean
If set, every page of the pool will be touched and written to when the pool is created, in
order to trigger page allocation and minimize the performance impact of pagefaults.
Affects only the pmemobj_create() function.
prefault.at_open | rw | global | int | int | - | boolean
If set, every page of the pool will be touched and written to when the pool is opened, in
order to trigger page allocation and minimize the performance impact of pagefaults.
Affects only the pmemobj_open() function.
sds.at_create | rw | global | int | int | - | boolean
If set, force-enables or force-disables SDS feature during pool creation. Affects only
the pmemobj_create() function. See pmempool_feature_query(3) for information about SDS
(SHUTDOWN_STATE) feature.
copy_on_write.at_open | rw | global | int | int | - | boolean
If set, pool is mapped in such a way that modifications don't reach the underlying medium.
From the user's perspective this means that when the pool is closed all changes are
reverted. This feature is not supported for pools located on Device DAX.
tx.debug.skip_expensive_checks | rw | - | int | int | - | boolean
Turns off some expensive checks performed by the transaction module in “debug” builds.
Ignored in “release” builds.
tx.debug.verify_user_buffers | rw | - | int | int | - | boolean
Enables verification of user buffers provided by pmemobj_tx_log_append_buffer(3) API. For
now the only verified aspect is whether the same buffer is used simultaneously in 2 or
more transactions or more than once in the same transaction. This value should not be
modified at runtime if any transaction for the current pool is in progress.
tx.cache.size | rw | - | long long | long long | - | integer
Size in bytes of the transaction snapshot cache. In a larger cache the frequency of
persistent allocations is lower, but with higher fixed cost.
This should be set to roughly the sum of sizes of the snapshotted regions in an average
transaction in the pool.
This entry point is not thread safe and should not be modified if there are any
transactions currently running.
This value must be a in a range between 0 and PMEMOBJ_MAX_ALLOC_SIZE, otherwise this entry
point will fail.
tx.cache.threshold | rw | - | long long | long long | - | integer
This entry point is deprecated. All snapshots, regardless of the size, use the
transactional cache.
tx.post_commit.queue_depth | rw | - | int | int | - | integer
This entry point is deprecated.
tx.post_commit.worker | r- | - | void * | - | - | -
This entry point is deprecated.
tx.post_commit.stop | r- | - | void * | - | - | -
This entry point is deprecated.
heap.narenas.automatic | r- | - | unsigned | - | - | -
Reads the number of arenas used in automatic scheduling of memory operations for threads.
By default, this value is equal to the number of available processors. An arena is a
memory management structure which enables concurrency by taking exclusive ownership of
parts of the heap and allowing associated threads to allocate without contention.
heap.narenas.total | r- | - | unsigned | - | - | -
Reads the number of all created arenas. It includes automatic arenas created by default
and arenas created using heap.arena.create CTL.
heap.narenas.max | rw- | - | unsigned | unsigned | - | -
Reads or writes the maximum number of arenas that can be created. This entry point is not
thread-safe with regards to heap operations (allocations, frees, reallocs).
heap.arena.[arena_id].size | r- | - | uint64_t | - | - | -
Reads the total amount of memory in bytes which is currently exclusively owned by the
arena. Large differences in this value between arenas might indicate an uneven scheduling
of memory resources. The arena id cannot be 0.
heap.thread.arena_id | rw- | - | unsigned | unsigned | - | -
Reads the index of the arena assigned to the current thread or assigns arena with specific
id to the current thread. The arena id cannot be 0.
heap.arena.create | –x | - | - | - | unsigned | -
Creates and initializes one new arena in the heap. This entry point reads an id of the
new created arena.
Newly created arenas by this CTL are inactive, which means that the arena will not be used
in the automatic scheduling of memory requests. To activate the new arena, use
heap.arena.[arena_id].automatic CTL.
Arena created using this CTL can be used for allocation by explicitly specifying the
arena_id for POBJ_ARENA_ID(id) flag in
pmemobj_tx_xalloc()/pmemobj_xalloc()/pmemobj_xreserve() functions.
By default, the number of arenas is limited to 1024.
heap.arena.[arena_id].automatic | rw- | - | boolean | boolean | - | -
Reads or modifies the state of the arena. If set, the arena is used in automatic
scheduling of memory operations for threads. This should be set to false if the
application wants to manually manage allocator scalability through explicitly assigning
arenas to threads by using heap.thread.arena_id. The arena id cannot be 0 and at least
one automatic arena must exist.
heap.arenas_assignment_type | rw | global | enum pobj_arenas_assignment_type |
enum pobj_arenas_assignment_type | - | string
Reads or modifies the behavior of arenas assignment for threads. By default, each thread
is assigned its own arena from the pool of automatic arenas (described earlier). This
consumes one TLS key from the OS for every open pool. Applications that wish to avoid
this behavior can instead rely on one global arena assignment per pool. This might limits
scalability if not using arenas explicitly.
The argument for this CTL is an enum with the following types:
• POBJ_ARENAS_ASSIGNMENT_THREAD_KEY, string value: thread. Default, threads use
individually assigned arenas.
• POBJ_ARENAS_ASSIGNMENT_GLOBAL, string value: global. Threads use one global arena.
Changing this value has no impact on already open pools. It should typically be set at
the beginning of the application, before any pools are opened or created.
heap.arenas_default_max | rw- | global | unsigned | unsigned | - | integer
Reads or writes the number of arenas that are created by default on startup of the heap's
runtime state. This value by default is equal to the number of online CPUs available on
the platform, but can be decreased or increased depending on application's scalability
requirements.
heap.alloc_class.[class_id].desc | rw | - | struct pobj_alloc_class_desc |
struct pobj_alloc_class_desc | - | integer, integer, integer, string
Describes an allocation class. Allows one to create or view the internal data structures
of the allocator.
Creating custom allocation classes can be beneficial for both raw allocation throughput,
scalability and, most importantly, fragmentation. By carefully constructing allocation
classes that match the application workload, one can entirely eliminate external and
internal fragmentation. For example, it is possible to easily construct a slab-like
allocation mechanism for any data structure.
The [class_id] is an index field. Only values between 0-254 are valid. If setting an
allocation class, but the class_id is already taken, the function will return -1. The
values between 0-127 are reserved for the default allocation classes of the library and
can be used only for reading.
The recommended method for retrieving information about all allocation classes is to call
this entry point for all class ids between 0 and 254 and discard those results for which
the function returns an error.
This entry point takes a complex argument.
struct pobj_alloc_class_desc {
size_t unit_size;
size_t alignment;
unsigned units_per_block;
enum pobj_header_type header_type;
unsigned class_id;
};
The first field, unit_size, is an 8-byte unsigned integer that defines the allocation
class size. While theoretically limited only by PMEMOBJ_MAX_ALLOC_SIZE, for most
workloads this value should be between 8 bytes and 2 megabytes.
The alignment field specifies the user data alignment of objects allocated using the
class. If set, must be a power of two and an even divisor of unit size. Alignment is
limited to maximum of 2 megabytes. All objects have default alignment of 64 bytes, but
the user data alignment is affected by the size of the chosen header.
The units_per_block field defines how many units a single block of memory contains. This
value will be adjusted to match the internal size of the block (256 kilobytes or a
multiple thereof). For example, given a class with a unit_size of 512 bytes and a
units_per_block of 1000, a single block of memory for that class will have 512 kilobytes.
This is relevant because the bigger the block size, the less frequently blocks need to be
fetched, resulting in lower contention on global heap state. If the CTL call is being
done at runtime, the units_per_block variable of the provided alloc class structure is
modified to match the actual value.
The header_type field defines the header of objects from the allocation class. There are
three types:
• POBJ_HEADER_LEGACY, string value: legacy. Used for allocation classes prior to version
1.3 of the library. Not recommended for use. Incurs a 64 byte metadata overhead for
every object. Fully supports all features.
• POBJ_HEADER_COMPACT, string value: compact. Used as default for all predefined
allocation classes. Incurs a 16 byte metadata overhead for every object. Fully
supports all features.
• POBJ_HEADER_NONE, string value: none. Header type that incurs no metadata overhead
beyond a single bitmap entry. Can be used for very small allocation classes or when
objects must be adjacent to each other. This header type does not support type numbers
(type number is always
0) or allocations that span more than one unit.
The class_id field is an optional, runtime-only variable that allows the user to retrieve
the identifier of the class. This will be equivalent to the provided [class_id]. This
field cannot be set from a config file.
The allocation classes are a runtime state of the library and must be created after every
open. It is highly recommended to use the configuration file to store the classes.
This structure is declared in the libpmemobj/ctl.h header file. Please refer to this file
for an in-depth explanation of the allocation classes and relevant algorithms.
Allocation classes constructed in this way can be leveraged by explicitly specifying the
class using POBJ_CLASS_ID(id) flag in pmemobj_tx_xalloc()/pmemobj_xalloc() functions.
Example of a valid alloc class query string:
heap.alloc_class.128.desc=500,0,1000,compact
This query, if executed, will create an allocation class with an id of 128 that has a unit
size of 500 bytes, has at least 1000 units per block and uses a compact header.
For reading, function returns 0 if successful, if the allocation class does not exist it
sets the errno to ENOENT and returns -1;
This entry point can fail if any of the parameters of the allocation class is invalid or
if exactly the same class already exists.
heap.alloc_class.new.desc | -w | - | - | struct pobj_alloc_class_desc | - | integer,
integer, integer, string
Same as heap.alloc_class.[class_id].desc, but instead of requiring the user to provide the
class_id, it automatically creates the allocation class with the first available
identifier.
This should be used when it's impossible to guarantee unique allocation class naming in
the application (e.g. when writing a library that uses libpmemobj).
The required class identifier will be stored in the class_id field of the
struct pobj_alloc_class_desc.
stats.enabled | rw | - | enum pobj_stats_enabled | enum pobj_stats_enabled | - | string
Enables or disables runtime collection of statistics. There are two types of statistics:
persistent and transient ones. Persistent statistics survive pool restarts, whereas
transient ones don't. Statistics are not recalculated after enabling; any operations that
occur between disabling and re-enabling will not be reflected in subsequent values.
Only transient statistics are enabled by default. Enabling persistent statistics may have
non-trivial performance impact.
stats.heap.curr_allocated | r- | - | uint64_t | - | - | -
Reads the number of bytes currently allocated in the heap. If statistics were disabled at
any time in the lifetime of the heap, this value may be inaccurate.
This is a persistent statistic.
stats.heap.run_allocated | r- | - | uint64_t | - | - | -
Reads the number of bytes currently allocated using run-based allocation classes, i.e.,
huge allocations are not accounted for in this statistic. This is useful for comparison
against stats.heap.run_active to estimate the ratio between active and allocated memory.
This is a transient statistic and is rebuilt every time the pool is opened.
stats.heap.run_active | r- | - | uint64_t | - | - | -
Reads the number of bytes currently occupied by all run memory blocks, including both
allocated and free space, i.e., this is all the all space that's not occupied by huge
allocations.
This value is a sum of all allocated and free run memory. In systems where memory is
efficiently used, run_active should closely track run_allocated, and the amount of active,
but free, memory should be minimal.
A large relative difference between active memory and allocated memory is indicative of
heap fragmentation. This information can be used to make a decision to call
pmemobj_defrag()(3) if the fragmentation looks to be high.
However, for small heaps run_active might be disproportionately higher than run_allocated
because the allocator typically activates a significantly larger amount of memory than is
required to satisfy a single request in the anticipation of future needs. For example,
the first allocation of 100 bytes in a heap will trigger activation of 256 kilobytes of
space.
This is a transient statistic and is rebuilt lazily every time the pool is opened.
heap.size.granularity | rw- | - | uint64_t | uint64_t | - | long long
Reads or modifies the granularity with which the heap grows when OOM. Valid only if the
poolset has been defined with directories.
A granularity of 0 specifies that the pool will not grow automatically.
This entry point can fail if the granularity value is non-zero and smaller than
PMEMOBJ_MIN_PART.
heap.size.extend | –x | - | - | - | uint64_t | -
Extends the heap by the given size. Must be larger than PMEMOBJ_MIN_PART.
This entry point can fail if the pool does not support extend functionality or if there's
not enough space left on the device.
debug.heap.alloc_pattern | rw | - | int | int | - | -
Single byte pattern that is used to fill new uninitialized memory allocation. If the
value is negative, no pattern is written. This is intended for debugging, and is disabled
by default.
CTL EXTERNAL CONFIGURATION
In addition to direct function call, each write entry point can also be set using two
alternative methods.
The first method is to load a configuration directly from the PMEMOBJ_CONF environment
variable.
The second method of loading an external configuration is to set the PMEMOBJ_CONF_FILE
environment variable to point to a file that contains a sequence of ctl queries.
See more in pmem_ctl(5) man page.
SEE ALSO
libpmemobj(7), pmem_ctl(5) and <https://pmem.io>