Provided by: liblapack-doc_3.11.0-2_all 
NAME
realOTHERauxiliary - real
SYNOPSIS
Functions
integer function ilaslc (M, N, A, LDA)
ILASLC scans a matrix for its last non-zero column.
integer function ilaslr (M, N, A, LDA)
ILASLR scans a matrix for its last non-zero row.
subroutine slabrd (M, N, NB, A, LDA, D, E, TAUQ, TAUP, X, LDX, Y, LDY)
SLABRD reduces the first nb rows and columns of a general matrix to a bidiagonal form.
subroutine slacn2 (N, V, X, ISGN, EST, KASE, ISAVE)
SLACN2 estimates the 1-norm of a square matrix, using reverse communication for
evaluating matrix-vector products.
subroutine slacon (N, V, X, ISGN, EST, KASE)
SLACON estimates the 1-norm of a square matrix, using reverse communication for
evaluating matrix-vector products.
subroutine sladiv (A, B, C, D, P, Q)
SLADIV performs complex division in real arithmetic, avoiding unnecessary overflow.
subroutine sladiv1 (A, B, C, D, P, Q)
real function sladiv2 (A, B, C, D, R, T)
subroutine slaein (RIGHTV, NOINIT, N, H, LDH, WR, WI, VR, VI, B, LDB, WORK, EPS3, SMLNUM,
BIGNUM, INFO)
SLAEIN computes a specified right or left eigenvector of an upper Hessenberg matrix by
inverse iteration.
subroutine slaexc (WANTQ, N, T, LDT, Q, LDQ, J1, N1, N2, WORK, INFO)
SLAEXC swaps adjacent diagonal blocks of a real upper quasi-triangular matrix in Schur
canonical form, by an orthogonal similarity transformation.
subroutine slag2 (A, LDA, B, LDB, SAFMIN, SCALE1, SCALE2, WR1, WR2, WI)
SLAG2 computes the eigenvalues of a 2-by-2 generalized eigenvalue problem, with
scaling as necessary to avoid over-/underflow.
subroutine slags2 (UPPER, A1, A2, A3, B1, B2, B3, CSU, SNU, CSV, SNV, CSQ, SNQ)
SLAGS2 computes 2-by-2 orthogonal matrices U, V, and Q, and applies them to matrices A
and B such that the rows of the transformed A and B are parallel.
subroutine slagtm (TRANS, N, NRHS, ALPHA, DL, D, DU, X, LDX, BETA, B, LDB)
SLAGTM performs a matrix-matrix product of the form C = αAB+βC, where A is a
tridiagonal matrix, B and C are rectangular matrices, and α and β are scalars, which
may be 0, 1, or -1.
subroutine slagv2 (A, LDA, B, LDB, ALPHAR, ALPHAI, BETA, CSL, SNL, CSR, SNR)
SLAGV2 computes the Generalized Schur factorization of a real 2-by-2 matrix pencil
(A,B) where B is upper triangular.
subroutine slahqr (WANTT, WANTZ, N, ILO, IHI, H, LDH, WR, WI, ILOZ, IHIZ, Z, LDZ, INFO)
SLAHQR computes the eigenvalues and Schur factorization of an upper Hessenberg matrix,
using the double-shift/single-shift QR algorithm.
subroutine slahr2 (N, K, NB, A, LDA, TAU, T, LDT, Y, LDY)
SLAHR2 reduces the specified number of first columns of a general rectangular matrix A
so that elements below the specified subdiagonal are zero, and returns auxiliary
matrices which are needed to apply the transformation to the unreduced part of A.
subroutine slaic1 (JOB, J, X, SEST, W, GAMMA, SESTPR, S, C)
SLAIC1 applies one step of incremental condition estimation.
subroutine slaln2 (LTRANS, NA, NW, SMIN, CA, A, LDA, D1, D2, B, LDB, WR, WI, X, LDX,
SCALE, XNORM, INFO)
SLALN2 solves a 1-by-1 or 2-by-2 linear system of equations of the specified form.
real function slangt (NORM, N, DL, D, DU)
SLANGT returns the value of the 1-norm, Frobenius norm, infinity-norm, or the largest
absolute value of any element of a general tridiagonal matrix.
real function slanhs (NORM, N, A, LDA, WORK)
SLANHS returns the value of the 1-norm, Frobenius norm, infinity-norm, or the largest
absolute value of any element of an upper Hessenberg matrix.
real function slansb (NORM, UPLO, N, K, AB, LDAB, WORK)
SLANSB returns the value of the 1-norm, or the Frobenius norm, or the infinity norm,
or the element of largest absolute value of a symmetric band matrix.
real function slansp (NORM, UPLO, N, AP, WORK)
SLANSP returns the value of the 1-norm, or the Frobenius norm, or the infinity norm,
or the element of largest absolute value of a symmetric matrix supplied in packed
form.
real function slantb (NORM, UPLO, DIAG, N, K, AB, LDAB, WORK)
SLANTB returns the value of the 1-norm, or the Frobenius norm, or the infinity norm,
or the element of largest absolute value of a triangular band matrix.
real function slantp (NORM, UPLO, DIAG, N, AP, WORK)
SLANTP returns the value of the 1-norm, or the Frobenius norm, or the infinity norm,
or the element of largest absolute value of a triangular matrix supplied in packed
form.
real function slantr (NORM, UPLO, DIAG, M, N, A, LDA, WORK)
SLANTR returns the value of the 1-norm, or the Frobenius norm, or the infinity norm,
or the element of largest absolute value of a trapezoidal or triangular matrix.
subroutine slanv2 (A, B, C, D, RT1R, RT1I, RT2R, RT2I, CS, SN)
SLANV2 computes the Schur factorization of a real 2-by-2 nonsymmetric matrix in
standard form.
subroutine slapll (N, X, INCX, Y, INCY, SSMIN)
SLAPLL measures the linear dependence of two vectors.
subroutine slapmr (FORWRD, M, N, X, LDX, K)
SLAPMR rearranges rows of a matrix as specified by a permutation vector.
subroutine slapmt (FORWRD, M, N, X, LDX, K)
SLAPMT performs a forward or backward permutation of the columns of a matrix.
subroutine slaqp2 (M, N, OFFSET, A, LDA, JPVT, TAU, VN1, VN2, WORK)
SLAQP2 computes a QR factorization with column pivoting of the matrix block.
subroutine slaqps (M, N, OFFSET, NB, KB, A, LDA, JPVT, TAU, VN1, VN2, AUXV, F, LDF)
SLAQPS computes a step of QR factorization with column pivoting of a real m-by-n
matrix A by using BLAS level 3.
subroutine slaqr0 (WANTT, WANTZ, N, ILO, IHI, H, LDH, WR, WI, ILOZ, IHIZ, Z, LDZ, WORK,
LWORK, INFO)
SLAQR0 computes the eigenvalues of a Hessenberg matrix, and optionally the matrices
from the Schur decomposition.
subroutine slaqr1 (N, H, LDH, SR1, SI1, SR2, SI2, V)
SLAQR1 sets a scalar multiple of the first column of the product of 2-by-2 or 3-by-3
matrix H and specified shifts.
subroutine slaqr2 (WANTT, WANTZ, N, KTOP, KBOT, NW, H, LDH, ILOZ, IHIZ, Z, LDZ, NS, ND,
SR, SI, V, LDV, NH, T, LDT, NV, WV, LDWV, WORK, LWORK)
SLAQR2 performs the orthogonal similarity transformation of a Hessenberg matrix to
detect and deflate fully converged eigenvalues from a trailing principal submatrix
(aggressive early deflation).
subroutine slaqr3 (WANTT, WANTZ, N, KTOP, KBOT, NW, H, LDH, ILOZ, IHIZ, Z, LDZ, NS, ND,
SR, SI, V, LDV, NH, T, LDT, NV, WV, LDWV, WORK, LWORK)
SLAQR3 performs the orthogonal similarity transformation of a Hessenberg matrix to
detect and deflate fully converged eigenvalues from a trailing principal submatrix
(aggressive early deflation).
subroutine slaqr4 (WANTT, WANTZ, N, ILO, IHI, H, LDH, WR, WI, ILOZ, IHIZ, Z, LDZ, WORK,
LWORK, INFO)
SLAQR4 computes the eigenvalues of a Hessenberg matrix, and optionally the matrices
from the Schur decomposition.
subroutine slaqr5 (WANTT, WANTZ, KACC22, N, KTOP, KBOT, NSHFTS, SR, SI, H, LDH, ILOZ,
IHIZ, Z, LDZ, V, LDV, U, LDU, NV, WV, LDWV, NH, WH, LDWH)
SLAQR5 performs a single small-bulge multi-shift QR sweep.
subroutine slaqsb (UPLO, N, KD, AB, LDAB, S, SCOND, AMAX, EQUED)
SLAQSB scales a symmetric/Hermitian band matrix, using scaling factors computed by
spbequ.
subroutine slaqsp (UPLO, N, AP, S, SCOND, AMAX, EQUED)
SLAQSP scales a symmetric/Hermitian matrix in packed storage, using scaling factors
computed by sppequ.
subroutine slaqtr (LTRAN, LREAL, N, T, LDT, B, W, SCALE, X, WORK, INFO)
SLAQTR solves a real quasi-triangular system of equations, or a complex quasi-
triangular system of special form, in real arithmetic.
subroutine slar1v (N, B1, BN, LAMBDA, D, L, LD, LLD, PIVMIN, GAPTOL, Z, WANTNC, NEGCNT,
ZTZ, MINGMA, R, ISUPPZ, NRMINV, RESID, RQCORR, WORK)
SLAR1V computes the (scaled) r-th column of the inverse of the submatrix in rows b1
through bn of the tridiagonal matrix LDLT - λI.
subroutine slar2v (N, X, Y, Z, INCX, C, S, INCC)
SLAR2V applies a vector of plane rotations with real cosines and real sines from both
sides to a sequence of 2-by-2 symmetric/Hermitian matrices.
subroutine slarf (SIDE, M, N, V, INCV, TAU, C, LDC, WORK)
SLARF applies an elementary reflector to a general rectangular matrix.
subroutine slarfb (SIDE, TRANS, DIRECT, STOREV, M, N, K, V, LDV, T, LDT, C, LDC, WORK,
LDWORK)
SLARFB applies a block reflector or its transpose to a general rectangular matrix.
subroutine slarfg (N, ALPHA, X, INCX, TAU)
SLARFG generates an elementary reflector (Householder matrix).
subroutine slarfgp (N, ALPHA, X, INCX, TAU)
SLARFGP generates an elementary reflector (Householder matrix) with non-negative beta.
subroutine slarft (DIRECT, STOREV, N, K, V, LDV, TAU, T, LDT)
SLARFT forms the triangular factor T of a block reflector H = I - vtvH
subroutine slarfx (SIDE, M, N, V, TAU, C, LDC, WORK)
SLARFX applies an elementary reflector to a general rectangular matrix, with loop
unrolling when the reflector has order ≤ 10.
subroutine slarfy (UPLO, N, V, INCV, TAU, C, LDC, WORK)
SLARFY
subroutine slargv (N, X, INCX, Y, INCY, C, INCC)
SLARGV generates a vector of plane rotations with real cosines and real sines.
subroutine slarrv (N, VL, VU, D, L, PIVMIN, ISPLIT, M, DOL, DOU, MINRGP, RTOL1, RTOL2, W,
WERR, WGAP, IBLOCK, INDEXW, GERS, Z, LDZ, ISUPPZ, WORK, IWORK, INFO)
SLARRV computes the eigenvectors of the tridiagonal matrix T = L D LT given L, D and
the eigenvalues of L D LT.
subroutine slartv (N, X, INCX, Y, INCY, C, S, INCC)
SLARTV applies a vector of plane rotations with real cosines and real sines to the
elements of a pair of vectors.
subroutine slaswp (N, A, LDA, K1, K2, IPIV, INCX)
SLASWP performs a series of row interchanges on a general rectangular matrix.
subroutine slatbs (UPLO, TRANS, DIAG, NORMIN, N, KD, AB, LDAB, X, SCALE, CNORM, INFO)
SLATBS solves a triangular banded system of equations.
subroutine slatdf (IJOB, N, Z, LDZ, RHS, RDSUM, RDSCAL, IPIV, JPIV)
SLATDF uses the LU factorization of the n-by-n matrix computed by sgetc2 and computes
a contribution to the reciprocal Dif-estimate.
subroutine slatps (UPLO, TRANS, DIAG, NORMIN, N, AP, X, SCALE, CNORM, INFO)
SLATPS solves a triangular system of equations with the matrix held in packed storage.
subroutine slatrs (UPLO, TRANS, DIAG, NORMIN, N, A, LDA, X, SCALE, CNORM, INFO)
SLATRS solves a triangular system of equations with the scale factor set to prevent
overflow.
subroutine slauu2 (UPLO, N, A, LDA, INFO)
SLAUU2 computes the product UUH or LHL, where U and L are upper or lower triangular
matrices (unblocked algorithm).
subroutine slauum (UPLO, N, A, LDA, INFO)
SLAUUM computes the product UUH or LHL, where U and L are upper or lower triangular
matrices (blocked algorithm).
subroutine srscl (N, SA, SX, INCX)
SRSCL multiplies a vector by the reciprocal of a real scalar.
subroutine stprfb (SIDE, TRANS, DIRECT, STOREV, M, N, K, L, V, LDV, T, LDT, A, LDA, B,
LDB, WORK, LDWORK)
STPRFB applies a real 'triangular-pentagonal' block reflector to a real matrix, which
is composed of two blocks.
Detailed Description
This is the group of real other auxiliary routines
Function Documentation
integer function ilaslc (integer M, integer N, real, dimension( lda, * ) A, integer LDA)
ILASLC scans a matrix for its last non-zero column.
Purpose:
ILASLC scans A for its last non-zero column.
Parameters
M
M is INTEGER
The number of rows of the matrix A.
N
N is INTEGER
The number of columns of the matrix A.
A
A is REAL array, dimension (LDA,N)
The m by n matrix A.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,M).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
integer function ilaslr (integer M, integer N, real, dimension( lda, * ) A, integer LDA)
ILASLR scans a matrix for its last non-zero row.
Purpose:
ILASLR scans A for its last non-zero row.
Parameters
M
M is INTEGER
The number of rows of the matrix A.
N
N is INTEGER
The number of columns of the matrix A.
A
A is REAL array, dimension (LDA,N)
The m by n matrix A.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,M).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slabrd (integer M, integer N, integer NB, real, dimension( lda, * ) A, integer LDA,
real, dimension( * ) D, real, dimension( * ) E, real, dimension( * ) TAUQ, real,
dimension( * ) TAUP, real, dimension( ldx, * ) X, integer LDX, real, dimension( ldy, * )
Y, integer LDY)
SLABRD reduces the first nb rows and columns of a general matrix to a bidiagonal form.
Purpose:
SLABRD reduces the first NB rows and columns of a real general
m by n matrix A to upper or lower bidiagonal form by an orthogonal
transformation Q**T * A * P, and returns the matrices X and Y which
are needed to apply the transformation to the unreduced part of A.
If m >= n, A is reduced to upper bidiagonal form; if m < n, to lower
bidiagonal form.
This is an auxiliary routine called by SGEBRD
Parameters
M
M is INTEGER
The number of rows in the matrix A.
N
N is INTEGER
The number of columns in the matrix A.
NB
NB is INTEGER
The number of leading rows and columns of A to be reduced.
A
A is REAL array, dimension (LDA,N)
On entry, the m by n general matrix to be reduced.
On exit, the first NB rows and columns of the matrix are
overwritten; the rest of the array is unchanged.
If m >= n, elements on and below the diagonal in the first NB
columns, with the array TAUQ, represent the orthogonal
matrix Q as a product of elementary reflectors; and
elements above the diagonal in the first NB rows, with the
array TAUP, represent the orthogonal matrix P as a product
of elementary reflectors.
If m < n, elements below the diagonal in the first NB
columns, with the array TAUQ, represent the orthogonal
matrix Q as a product of elementary reflectors, and
elements on and above the diagonal in the first NB rows,
with the array TAUP, represent the orthogonal matrix P as
a product of elementary reflectors.
See Further Details.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,M).
D
D is REAL array, dimension (NB)
The diagonal elements of the first NB rows and columns of
the reduced matrix. D(i) = A(i,i).
E
E is REAL array, dimension (NB)
The off-diagonal elements of the first NB rows and columns of
the reduced matrix.
TAUQ
TAUQ is REAL array, dimension (NB)
The scalar factors of the elementary reflectors which
represent the orthogonal matrix Q. See Further Details.
TAUP
TAUP is REAL array, dimension (NB)
The scalar factors of the elementary reflectors which
represent the orthogonal matrix P. See Further Details.
X
X is REAL array, dimension (LDX,NB)
The m-by-nb matrix X required to update the unreduced part
of A.
LDX
LDX is INTEGER
The leading dimension of the array X. LDX >= max(1,M).
Y
Y is REAL array, dimension (LDY,NB)
The n-by-nb matrix Y required to update the unreduced part
of A.
LDY
LDY is INTEGER
The leading dimension of the array Y. LDY >= max(1,N).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
The matrices Q and P are represented as products of elementary
reflectors:
Q = H(1) H(2) . . . H(nb) and P = G(1) G(2) . . . G(nb)
Each H(i) and G(i) has the form:
H(i) = I - tauq * v * v**T and G(i) = I - taup * u * u**T
where tauq and taup are real scalars, and v and u are real vectors.
If m >= n, v(1:i-1) = 0, v(i) = 1, and v(i:m) is stored on exit in
A(i:m,i); u(1:i) = 0, u(i+1) = 1, and u(i+1:n) is stored on exit in
A(i,i+1:n); tauq is stored in TAUQ(i) and taup in TAUP(i).
If m < n, v(1:i) = 0, v(i+1) = 1, and v(i+1:m) is stored on exit in
A(i+2:m,i); u(1:i-1) = 0, u(i) = 1, and u(i:n) is stored on exit in
A(i,i+1:n); tauq is stored in TAUQ(i) and taup in TAUP(i).
The elements of the vectors v and u together form the m-by-nb matrix
V and the nb-by-n matrix U**T which are needed, with X and Y, to apply
the transformation to the unreduced part of the matrix, using a block
update of the form: A := A - V*Y**T - X*U**T.
The contents of A on exit are illustrated by the following examples
with nb = 2:
m = 6 and n = 5 (m > n): m = 5 and n = 6 (m < n):
( 1 1 u1 u1 u1 ) ( 1 u1 u1 u1 u1 u1 )
( v1 1 1 u2 u2 ) ( 1 1 u2 u2 u2 u2 )
( v1 v2 a a a ) ( v1 1 a a a a )
( v1 v2 a a a ) ( v1 v2 a a a a )
( v1 v2 a a a ) ( v1 v2 a a a a )
( v1 v2 a a a )
where a denotes an element of the original matrix which is unchanged,
vi denotes an element of the vector defining H(i), and ui an element
of the vector defining G(i).
subroutine slacn2 (integer N, real, dimension( * ) V, real, dimension( * ) X, integer,
dimension( * ) ISGN, real EST, integer KASE, integer, dimension( 3 ) ISAVE)
SLACN2 estimates the 1-norm of a square matrix, using reverse communication for evaluating
matrix-vector products.
Purpose:
SLACN2 estimates the 1-norm of a square, real matrix A.
Reverse communication is used for evaluating matrix-vector products.
Parameters
N
N is INTEGER
The order of the matrix. N >= 1.
V
V is REAL array, dimension (N)
On the final return, V = A*W, where EST = norm(V)/norm(W)
(W is not returned).
X
X is REAL array, dimension (N)
On an intermediate return, X should be overwritten by
A * X, if KASE=1,
A**T * X, if KASE=2,
and SLACN2 must be re-called with all the other parameters
unchanged.
ISGN
ISGN is INTEGER array, dimension (N)
EST
EST is REAL
On entry with KASE = 1 or 2 and ISAVE(1) = 3, EST should be
unchanged from the previous call to SLACN2.
On exit, EST is an estimate (a lower bound) for norm(A).
KASE
KASE is INTEGER
On the initial call to SLACN2, KASE should be 0.
On an intermediate return, KASE will be 1 or 2, indicating
whether X should be overwritten by A * X or A**T * X.
On the final return from SLACN2, KASE will again be 0.
ISAVE
ISAVE is INTEGER array, dimension (3)
ISAVE is used to save variables between calls to SLACN2
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Originally named SONEST, dated March 16, 1988.
This is a thread safe version of SLACON, which uses the array ISAVE
in place of a SAVE statement, as follows:
SLACON SLACN2
JUMP ISAVE(1)
J ISAVE(2)
ITER ISAVE(3)
Contributors:
Nick Higham, University of Manchester
References:
N.J. Higham, 'FORTRAN codes for estimating the one-norm of
a real or complex matrix, with applications to condition estimation', ACM Trans.
Math. Soft., vol. 14, no. 4, pp. 381-396, December 1988.
subroutine slacon (integer N, real, dimension( * ) V, real, dimension( * ) X, integer,
dimension( * ) ISGN, real EST, integer KASE)
SLACON estimates the 1-norm of a square matrix, using reverse communication for evaluating
matrix-vector products.
Purpose:
SLACON estimates the 1-norm of a square, real matrix A.
Reverse communication is used for evaluating matrix-vector products.
Parameters
N
N is INTEGER
The order of the matrix. N >= 1.
V
V is REAL array, dimension (N)
On the final return, V = A*W, where EST = norm(V)/norm(W)
(W is not returned).
X
X is REAL array, dimension (N)
On an intermediate return, X should be overwritten by
A * X, if KASE=1,
A**T * X, if KASE=2,
and SLACON must be re-called with all the other parameters
unchanged.
ISGN
ISGN is INTEGER array, dimension (N)
EST
EST is REAL
On entry with KASE = 1 or 2 and JUMP = 3, EST should be
unchanged from the previous call to SLACON.
On exit, EST is an estimate (a lower bound) for norm(A).
KASE
KASE is INTEGER
On the initial call to SLACON, KASE should be 0.
On an intermediate return, KASE will be 1 or 2, indicating
whether X should be overwritten by A * X or A**T * X.
On the final return from SLACON, KASE will again be 0.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
Nick Higham, University of Manchester.
Originally named SONEST, dated March 16, 1988.
References:
N.J. Higham, 'FORTRAN codes for estimating the one-norm of
a real or complex matrix, with applications to condition estimation', ACM Trans.
Math. Soft., vol. 14, no. 4, pp. 381-396, December 1988.
subroutine sladiv (real A, real B, real C, real D, real P, real Q)
SLADIV performs complex division in real arithmetic, avoiding unnecessary overflow.
Purpose:
SLADIV performs complex division in real arithmetic
a + i*b
p + i*q = ---------
c + i*d
The algorithm is due to Michael Baudin and Robert L. Smith
and can be found in the paper
"A Robust Complex Division in Scilab"
Parameters
A
A is REAL
B
B is REAL
C
C is REAL
D
D is REAL
The scalars a, b, c, and d in the above expression.
P
P is REAL
Q
Q is REAL
The scalars p and q in the above expression.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slaein (logical RIGHTV, logical NOINIT, integer N, real, dimension( ldh, * ) H,
integer LDH, real WR, real WI, real, dimension( * ) VR, real, dimension( * ) VI, real,
dimension( ldb, * ) B, integer LDB, real, dimension( * ) WORK, real EPS3, real SMLNUM,
real BIGNUM, integer INFO)
SLAEIN computes a specified right or left eigenvector of an upper Hessenberg matrix by
inverse iteration.
Purpose:
SLAEIN uses inverse iteration to find a right or left eigenvector
corresponding to the eigenvalue (WR,WI) of a real upper Hessenberg
matrix H.
Parameters
RIGHTV
RIGHTV is LOGICAL
= .TRUE. : compute right eigenvector;
= .FALSE.: compute left eigenvector.
NOINIT
NOINIT is LOGICAL
= .TRUE. : no initial vector supplied in (VR,VI).
= .FALSE.: initial vector supplied in (VR,VI).
N
N is INTEGER
The order of the matrix H. N >= 0.
H
H is REAL array, dimension (LDH,N)
The upper Hessenberg matrix H.
LDH
LDH is INTEGER
The leading dimension of the array H. LDH >= max(1,N).
WR
WR is REAL
WI
WI is REAL
The real and imaginary parts of the eigenvalue of H whose
corresponding right or left eigenvector is to be computed.
VR
VR is REAL array, dimension (N)
VI
VI is REAL array, dimension (N)
On entry, if NOINIT = .FALSE. and WI = 0.0, VR must contain
a real starting vector for inverse iteration using the real
eigenvalue WR; if NOINIT = .FALSE. and WI.ne.0.0, VR and VI
must contain the real and imaginary parts of a complex
starting vector for inverse iteration using the complex
eigenvalue (WR,WI); otherwise VR and VI need not be set.
On exit, if WI = 0.0 (real eigenvalue), VR contains the
computed real eigenvector; if WI.ne.0.0 (complex eigenvalue),
VR and VI contain the real and imaginary parts of the
computed complex eigenvector. The eigenvector is normalized
so that the component of largest magnitude has magnitude 1;
here the magnitude of a complex number (x,y) is taken to be
|x| + |y|.
VI is not referenced if WI = 0.0.
B
B is REAL array, dimension (LDB,N)
LDB
LDB is INTEGER
The leading dimension of the array B. LDB >= N+1.
WORK
WORK is REAL array, dimension (N)
EPS3
EPS3 is REAL
A small machine-dependent value which is used to perturb
close eigenvalues, and to replace zero pivots.
SMLNUM
SMLNUM is REAL
A machine-dependent value close to the underflow threshold.
BIGNUM
BIGNUM is REAL
A machine-dependent value close to the overflow threshold.
INFO
INFO is INTEGER
= 0: successful exit
= 1: inverse iteration did not converge; VR is set to the
last iterate, and so is VI if WI.ne.0.0.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slaexc (logical WANTQ, integer N, real, dimension( ldt, * ) T, integer LDT, real,
dimension( ldq, * ) Q, integer LDQ, integer J1, integer N1, integer N2, real, dimension( *
) WORK, integer INFO)
SLAEXC swaps adjacent diagonal blocks of a real upper quasi-triangular matrix in Schur
canonical form, by an orthogonal similarity transformation.
Purpose:
SLAEXC swaps adjacent diagonal blocks T11 and T22 of order 1 or 2 in
an upper quasi-triangular matrix T by an orthogonal similarity
transformation.
T must be in Schur canonical form, that is, block upper triangular
with 1-by-1 and 2-by-2 diagonal blocks; each 2-by-2 diagonal block
has its diagonal elements equal and its off-diagonal elements of
opposite sign.
Parameters
WANTQ
WANTQ is LOGICAL
= .TRUE. : accumulate the transformation in the matrix Q;
= .FALSE.: do not accumulate the transformation.
N
N is INTEGER
The order of the matrix T. N >= 0.
T
T is REAL array, dimension (LDT,N)
On entry, the upper quasi-triangular matrix T, in Schur
canonical form.
On exit, the updated matrix T, again in Schur canonical form.
LDT
LDT is INTEGER
The leading dimension of the array T. LDT >= max(1,N).
Q
Q is REAL array, dimension (LDQ,N)
On entry, if WANTQ is .TRUE., the orthogonal matrix Q.
On exit, if WANTQ is .TRUE., the updated matrix Q.
If WANTQ is .FALSE., Q is not referenced.
LDQ
LDQ is INTEGER
The leading dimension of the array Q.
LDQ >= 1; and if WANTQ is .TRUE., LDQ >= N.
J1
J1 is INTEGER
The index of the first row of the first block T11.
N1
N1 is INTEGER
The order of the first block T11. N1 = 0, 1 or 2.
N2
N2 is INTEGER
The order of the second block T22. N2 = 0, 1 or 2.
WORK
WORK is REAL array, dimension (N)
INFO
INFO is INTEGER
= 0: successful exit
= 1: the transformed matrix T would be too far from Schur
form; the blocks are not swapped and T and Q are
unchanged.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slag2 (real, dimension( lda, * ) A, integer LDA, real, dimension( ldb, * ) B,
integer LDB, real SAFMIN, real SCALE1, real SCALE2, real WR1, real WR2, real WI)
SLAG2 computes the eigenvalues of a 2-by-2 generalized eigenvalue problem, with scaling as
necessary to avoid over-/underflow.
Purpose:
SLAG2 computes the eigenvalues of a 2 x 2 generalized eigenvalue
problem A - w B, with scaling as necessary to avoid over-/underflow.
The scaling factor "s" results in a modified eigenvalue equation
s A - w B
where s is a non-negative scaling factor chosen so that w, w B,
and s A do not overflow and, if possible, do not underflow, either.
Parameters
A
A is REAL array, dimension (LDA, 2)
On entry, the 2 x 2 matrix A. It is assumed that its 1-norm
is less than 1/SAFMIN. Entries less than
sqrt(SAFMIN)*norm(A) are subject to being treated as zero.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= 2.
B
B is REAL array, dimension (LDB, 2)
On entry, the 2 x 2 upper triangular matrix B. It is
assumed that the one-norm of B is less than 1/SAFMIN. The
diagonals should be at least sqrt(SAFMIN) times the largest
element of B (in absolute value); if a diagonal is smaller
than that, then +/- sqrt(SAFMIN) will be used instead of
that diagonal.
LDB
LDB is INTEGER
The leading dimension of the array B. LDB >= 2.
SAFMIN
SAFMIN is REAL
The smallest positive number s.t. 1/SAFMIN does not
overflow. (This should always be SLAMCH('S') -- it is an
argument in order to avoid having to call SLAMCH frequently.)
SCALE1
SCALE1 is REAL
A scaling factor used to avoid over-/underflow in the
eigenvalue equation which defines the first eigenvalue. If
the eigenvalues are complex, then the eigenvalues are
( WR1 +/- WI i ) / SCALE1 (which may lie outside the
exponent range of the machine), SCALE1=SCALE2, and SCALE1
will always be positive. If the eigenvalues are real, then
the first (real) eigenvalue is WR1 / SCALE1 , but this may
overflow or underflow, and in fact, SCALE1 may be zero or
less than the underflow threshold if the exact eigenvalue
is sufficiently large.
SCALE2
SCALE2 is REAL
A scaling factor used to avoid over-/underflow in the
eigenvalue equation which defines the second eigenvalue. If
the eigenvalues are complex, then SCALE2=SCALE1. If the
eigenvalues are real, then the second (real) eigenvalue is
WR2 / SCALE2 , but this may overflow or underflow, and in
fact, SCALE2 may be zero or less than the underflow
threshold if the exact eigenvalue is sufficiently large.
WR1
WR1 is REAL
If the eigenvalue is real, then WR1 is SCALE1 times the
eigenvalue closest to the (2,2) element of A B**(-1). If the
eigenvalue is complex, then WR1=WR2 is SCALE1 times the real
part of the eigenvalues.
WR2
WR2 is REAL
If the eigenvalue is real, then WR2 is SCALE2 times the
other eigenvalue. If the eigenvalue is complex, then
WR1=WR2 is SCALE1 times the real part of the eigenvalues.
WI
WI is REAL
If the eigenvalue is real, then WI is zero. If the
eigenvalue is complex, then WI is SCALE1 times the imaginary
part of the eigenvalues. WI will always be non-negative.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slags2 (logical UPPER, real A1, real A2, real A3, real B1, real B2, real B3, real
CSU, real SNU, real CSV, real SNV, real CSQ, real SNQ)
SLAGS2 computes 2-by-2 orthogonal matrices U, V, and Q, and applies them to matrices A and
B such that the rows of the transformed A and B are parallel.
Purpose:
SLAGS2 computes 2-by-2 orthogonal matrices U, V and Q, such
that if ( UPPER ) then
U**T *A*Q = U**T *( A1 A2 )*Q = ( x 0 )
( 0 A3 ) ( x x )
and
V**T*B*Q = V**T *( B1 B2 )*Q = ( x 0 )
( 0 B3 ) ( x x )
or if ( .NOT.UPPER ) then
U**T *A*Q = U**T *( A1 0 )*Q = ( x x )
( A2 A3 ) ( 0 x )
and
V**T*B*Q = V**T*( B1 0 )*Q = ( x x )
( B2 B3 ) ( 0 x )
The rows of the transformed A and B are parallel, where
U = ( CSU SNU ), V = ( CSV SNV ), Q = ( CSQ SNQ )
( -SNU CSU ) ( -SNV CSV ) ( -SNQ CSQ )
Z**T denotes the transpose of Z.
Parameters
UPPER
UPPER is LOGICAL
= .TRUE.: the input matrices A and B are upper triangular.
= .FALSE.: the input matrices A and B are lower triangular.
A1
A1 is REAL
A2
A2 is REAL
A3
A3 is REAL
On entry, A1, A2 and A3 are elements of the input 2-by-2
upper (lower) triangular matrix A.
B1
B1 is REAL
B2
B2 is REAL
B3
B3 is REAL
On entry, B1, B2 and B3 are elements of the input 2-by-2
upper (lower) triangular matrix B.
CSU
CSU is REAL
SNU
SNU is REAL
The desired orthogonal matrix U.
CSV
CSV is REAL
SNV
SNV is REAL
The desired orthogonal matrix V.
CSQ
CSQ is REAL
SNQ
SNQ is REAL
The desired orthogonal matrix Q.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slagtm (character TRANS, integer N, integer NRHS, real ALPHA, real, dimension( * )
DL, real, dimension( * ) D, real, dimension( * ) DU, real, dimension( ldx, * ) X, integer
LDX, real BETA, real, dimension( ldb, * ) B, integer LDB)
SLAGTM performs a matrix-matrix product of the form C = αAB+βC, where A is a tridiagonal
matrix, B and C are rectangular matrices, and α and β are scalars, which may be 0, 1, or
-1.
Purpose:
SLAGTM performs a matrix-vector product of the form
B := alpha * A * X + beta * B
where A is a tridiagonal matrix of order N, B and X are N by NRHS
matrices, and alpha and beta are real scalars, each of which may be
0., 1., or -1.
Parameters
TRANS
TRANS is CHARACTER*1
Specifies the operation applied to A.
= 'N': No transpose, B := alpha * A * X + beta * B
= 'T': Transpose, B := alpha * A'* X + beta * B
= 'C': Conjugate transpose = Transpose
N
N is INTEGER
The order of the matrix A. N >= 0.
NRHS
NRHS is INTEGER
The number of right hand sides, i.e., the number of columns
of the matrices X and B.
ALPHA
ALPHA is REAL
The scalar alpha. ALPHA must be 0., 1., or -1.; otherwise,
it is assumed to be 0.
DL
DL is REAL array, dimension (N-1)
The (n-1) sub-diagonal elements of T.
D
D is REAL array, dimension (N)
The diagonal elements of T.
DU
DU is REAL array, dimension (N-1)
The (n-1) super-diagonal elements of T.
X
X is REAL array, dimension (LDX,NRHS)
The N by NRHS matrix X.
LDX
LDX is INTEGER
The leading dimension of the array X. LDX >= max(N,1).
BETA
BETA is REAL
The scalar beta. BETA must be 0., 1., or -1.; otherwise,
it is assumed to be 1.
B
B is REAL array, dimension (LDB,NRHS)
On entry, the N by NRHS matrix B.
On exit, B is overwritten by the matrix expression
B := alpha * A * X + beta * B.
LDB
LDB is INTEGER
The leading dimension of the array B. LDB >= max(N,1).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slagv2 (real, dimension( lda, * ) A, integer LDA, real, dimension( ldb, * ) B,
integer LDB, real, dimension( 2 ) ALPHAR, real, dimension( 2 ) ALPHAI, real, dimension( 2
) BETA, real CSL, real SNL, real CSR, real SNR)
SLAGV2 computes the Generalized Schur factorization of a real 2-by-2 matrix pencil (A,B)
where B is upper triangular.
Purpose:
SLAGV2 computes the Generalized Schur factorization of a real 2-by-2
matrix pencil (A,B) where B is upper triangular. This routine
computes orthogonal (rotation) matrices given by CSL, SNL and CSR,
SNR such that
1) if the pencil (A,B) has two real eigenvalues (include 0/0 or 1/0
types), then
[ a11 a12 ] := [ CSL SNL ] [ a11 a12 ] [ CSR -SNR ]
[ 0 a22 ] [ -SNL CSL ] [ a21 a22 ] [ SNR CSR ]
[ b11 b12 ] := [ CSL SNL ] [ b11 b12 ] [ CSR -SNR ]
[ 0 b22 ] [ -SNL CSL ] [ 0 b22 ] [ SNR CSR ],
2) if the pencil (A,B) has a pair of complex conjugate eigenvalues,
then
[ a11 a12 ] := [ CSL SNL ] [ a11 a12 ] [ CSR -SNR ]
[ a21 a22 ] [ -SNL CSL ] [ a21 a22 ] [ SNR CSR ]
[ b11 0 ] := [ CSL SNL ] [ b11 b12 ] [ CSR -SNR ]
[ 0 b22 ] [ -SNL CSL ] [ 0 b22 ] [ SNR CSR ]
where b11 >= b22 > 0.
Parameters
A
A is REAL array, dimension (LDA, 2)
On entry, the 2 x 2 matrix A.
On exit, A is overwritten by the ``A-part'' of the
generalized Schur form.
LDA
LDA is INTEGER
THe leading dimension of the array A. LDA >= 2.
B
B is REAL array, dimension (LDB, 2)
On entry, the upper triangular 2 x 2 matrix B.
On exit, B is overwritten by the ``B-part'' of the
generalized Schur form.
LDB
LDB is INTEGER
THe leading dimension of the array B. LDB >= 2.
ALPHAR
ALPHAR is REAL array, dimension (2)
ALPHAI
ALPHAI is REAL array, dimension (2)
BETA
BETA is REAL array, dimension (2)
(ALPHAR(k)+i*ALPHAI(k))/BETA(k) are the eigenvalues of the
pencil (A,B), k=1,2, i = sqrt(-1). Note that BETA(k) may
be zero.
CSL
CSL is REAL
The cosine of the left rotation matrix.
SNL
SNL is REAL
The sine of the left rotation matrix.
CSR
CSR is REAL
The cosine of the right rotation matrix.
SNR
SNR is REAL
The sine of the right rotation matrix.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
Mark Fahey, Department of Mathematics, Univ. of Kentucky, USA
subroutine slahqr (logical WANTT, logical WANTZ, integer N, integer ILO, integer IHI, real,
dimension( ldh, * ) H, integer LDH, real, dimension( * ) WR, real, dimension( * ) WI,
integer ILOZ, integer IHIZ, real, dimension( ldz, * ) Z, integer LDZ, integer INFO)
SLAHQR computes the eigenvalues and Schur factorization of an upper Hessenberg matrix,
using the double-shift/single-shift QR algorithm.
Purpose:
SLAHQR is an auxiliary routine called by SHSEQR to update the
eigenvalues and Schur decomposition already computed by SHSEQR, by
dealing with the Hessenberg submatrix in rows and columns ILO to
IHI.
Parameters
WANTT
WANTT is LOGICAL
= .TRUE. : the full Schur form T is required;
= .FALSE.: only eigenvalues are required.
WANTZ
WANTZ is LOGICAL
= .TRUE. : the matrix of Schur vectors Z is required;
= .FALSE.: Schur vectors are not required.
N
N is INTEGER
The order of the matrix H. N >= 0.
ILO
ILO is INTEGER
IHI
IHI is INTEGER
It is assumed that H is already upper quasi-triangular in
rows and columns IHI+1:N, and that H(ILO,ILO-1) = 0 (unless
ILO = 1). SLAHQR works primarily with the Hessenberg
submatrix in rows and columns ILO to IHI, but applies
transformations to all of H if WANTT is .TRUE..
1 <= ILO <= max(1,IHI); IHI <= N.
H
H is REAL array, dimension (LDH,N)
On entry, the upper Hessenberg matrix H.
On exit, if INFO is zero and if WANTT is .TRUE., H is upper
quasi-triangular in rows and columns ILO:IHI, with any
2-by-2 diagonal blocks in standard form. If INFO is zero
and WANTT is .FALSE., the contents of H are unspecified on
exit. The output state of H if INFO is nonzero is given
below under the description of INFO.
LDH
LDH is INTEGER
The leading dimension of the array H. LDH >= max(1,N).
WR
WR is REAL array, dimension (N)
WI
WI is REAL array, dimension (N)
The real and imaginary parts, respectively, of the computed
eigenvalues ILO to IHI are stored in the corresponding
elements of WR and WI. If two eigenvalues are computed as a
complex conjugate pair, they are stored in consecutive
elements of WR and WI, say the i-th and (i+1)th, with
WI(i) > 0 and WI(i+1) < 0. If WANTT is .TRUE., the
eigenvalues are stored in the same order as on the diagonal
of the Schur form returned in H, with WR(i) = H(i,i), and, if
H(i:i+1,i:i+1) is a 2-by-2 diagonal block,
WI(i) = sqrt(H(i+1,i)*H(i,i+1)) and WI(i+1) = -WI(i).
ILOZ
ILOZ is INTEGER
IHIZ
IHIZ is INTEGER
Specify the rows of Z to which transformations must be
applied if WANTZ is .TRUE..
1 <= ILOZ <= ILO; IHI <= IHIZ <= N.
Z
Z is REAL array, dimension (LDZ,N)
If WANTZ is .TRUE., on entry Z must contain the current
matrix Z of transformations accumulated by SHSEQR, and on
exit Z has been updated; transformations are applied only to
the submatrix Z(ILOZ:IHIZ,ILO:IHI).
If WANTZ is .FALSE., Z is not referenced.
LDZ
LDZ is INTEGER
The leading dimension of the array Z. LDZ >= max(1,N).
INFO
INFO is INTEGER
= 0: successful exit
> 0: If INFO = i, SLAHQR failed to compute all the
eigenvalues ILO to IHI in a total of 30 iterations
per eigenvalue; elements i+1:ihi of WR and WI
contain those eigenvalues which have been
successfully computed.
If INFO > 0 and WANTT is .FALSE., then on exit,
the remaining unconverged eigenvalues are the
eigenvalues of the upper Hessenberg matrix rows
and columns ILO through INFO of the final, output
value of H.
If INFO > 0 and WANTT is .TRUE., then on exit
(*) (initial value of H)*U = U*(final value of H)
where U is an orthogonal matrix. The final
value of H is upper Hessenberg and triangular in
rows and columns INFO+1 through IHI.
If INFO > 0 and WANTZ is .TRUE., then on exit
(final value of Z) = (initial value of Z)*U
where U is the orthogonal matrix in (*)
(regardless of the value of WANTT.)
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
02-96 Based on modifications by
David Day, Sandia National Laboratory, USA
12-04 Further modifications by
Ralph Byers, University of Kansas, USA
This is a modified version of SLAHQR from LAPACK version 3.0.
It is (1) more robust against overflow and underflow and
(2) adopts the more conservative Ahues & Tisseur stopping
criterion (LAWN 122, 1997).
subroutine slahr2 (integer N, integer K, integer NB, real, dimension( lda, * ) A, integer LDA,
real, dimension( nb ) TAU, real, dimension( ldt, nb ) T, integer LDT, real, dimension(
ldy, nb ) Y, integer LDY)
SLAHR2 reduces the specified number of first columns of a general rectangular matrix A so
that elements below the specified subdiagonal are zero, and returns auxiliary matrices
which are needed to apply the transformation to the unreduced part of A.
Purpose:
SLAHR2 reduces the first NB columns of A real general n-BY-(n-k+1)
matrix A so that elements below the k-th subdiagonal are zero. The
reduction is performed by an orthogonal similarity transformation
Q**T * A * Q. The routine returns the matrices V and T which determine
Q as a block reflector I - V*T*V**T, and also the matrix Y = A * V * T.
This is an auxiliary routine called by SGEHRD.
Parameters
N
N is INTEGER
The order of the matrix A.
K
K is INTEGER
The offset for the reduction. Elements below the k-th
subdiagonal in the first NB columns are reduced to zero.
K < N.
NB
NB is INTEGER
The number of columns to be reduced.
A
A is REAL array, dimension (LDA,N-K+1)
On entry, the n-by-(n-k+1) general matrix A.
On exit, the elements on and above the k-th subdiagonal in
the first NB columns are overwritten with the corresponding
elements of the reduced matrix; the elements below the k-th
subdiagonal, with the array TAU, represent the matrix Q as a
product of elementary reflectors. The other columns of A are
unchanged. See Further Details.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,N).
TAU
TAU is REAL array, dimension (NB)
The scalar factors of the elementary reflectors. See Further
Details.
T
T is REAL array, dimension (LDT,NB)
The upper triangular matrix T.
LDT
LDT is INTEGER
The leading dimension of the array T. LDT >= NB.
Y
Y is REAL array, dimension (LDY,NB)
The n-by-nb matrix Y.
LDY
LDY is INTEGER
The leading dimension of the array Y. LDY >= N.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
The matrix Q is represented as a product of nb elementary reflectors
Q = H(1) H(2) . . . H(nb).
Each H(i) has the form
H(i) = I - tau * v * v**T
where tau is a real scalar, and v is a real vector with
v(1:i+k-1) = 0, v(i+k) = 1; v(i+k+1:n) is stored on exit in
A(i+k+1:n,i), and tau in TAU(i).
The elements of the vectors v together form the (n-k+1)-by-nb matrix
V which is needed, with T and Y, to apply the transformation to the
unreduced part of the matrix, using an update of the form:
A := (I - V*T*V**T) * (A - Y*V**T).
The contents of A on exit are illustrated by the following example
with n = 7, k = 3 and nb = 2:
( a a a a a )
( a a a a a )
( a a a a a )
( h h a a a )
( v1 h a a a )
( v1 v2 a a a )
( v1 v2 a a a )
where a denotes an element of the original matrix A, h denotes a
modified element of the upper Hessenberg matrix H, and vi denotes an
element of the vector defining H(i).
This subroutine is a slight modification of LAPACK-3.0's SLAHRD
incorporating improvements proposed by Quintana-Orti and Van de
Gejin. Note that the entries of A(1:K,2:NB) differ from those
returned by the original LAPACK-3.0's SLAHRD routine. (This
subroutine is not backward compatible with LAPACK-3.0's SLAHRD.)
References:
Gregorio Quintana-Orti and Robert van de Geijn, 'Improving the
performance of reduction to Hessenberg form,' ACM Transactions on Mathematical
Software, 32(2):180-194, June 2006.
subroutine slaic1 (integer JOB, integer J, real, dimension( j ) X, real SEST, real, dimension(
j ) W, real GAMMA, real SESTPR, real S, real C)
SLAIC1 applies one step of incremental condition estimation.
Purpose:
SLAIC1 applies one step of incremental condition estimation in
its simplest version:
Let x, twonorm(x) = 1, be an approximate singular vector of an j-by-j
lower triangular matrix L, such that
twonorm(L*x) = sest
Then SLAIC1 computes sestpr, s, c such that
the vector
[ s*x ]
xhat = [ c ]
is an approximate singular vector of
[ L 0 ]
Lhat = [ w**T gamma ]
in the sense that
twonorm(Lhat*xhat) = sestpr.
Depending on JOB, an estimate for the largest or smallest singular
value is computed.
Note that [s c]**T and sestpr**2 is an eigenpair of the system
diag(sest*sest, 0) + [alpha gamma] * [ alpha ]
[ gamma ]
where alpha = x**T*w.
Parameters
JOB
JOB is INTEGER
= 1: an estimate for the largest singular value is computed.
= 2: an estimate for the smallest singular value is computed.
J
J is INTEGER
Length of X and W
X
X is REAL array, dimension (J)
The j-vector x.
SEST
SEST is REAL
Estimated singular value of j by j matrix L
W
W is REAL array, dimension (J)
The j-vector w.
GAMMA
GAMMA is REAL
The diagonal element gamma.
SESTPR
SESTPR is REAL
Estimated singular value of (j+1) by (j+1) matrix Lhat.
S
S is REAL
Sine needed in forming xhat.
C
C is REAL
Cosine needed in forming xhat.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slaln2 (logical LTRANS, integer NA, integer NW, real SMIN, real CA, real,
dimension( lda, * ) A, integer LDA, real D1, real D2, real, dimension( ldb, * ) B, integer
LDB, real WR, real WI, real, dimension( ldx, * ) X, integer LDX, real SCALE, real XNORM,
integer INFO)
SLALN2 solves a 1-by-1 or 2-by-2 linear system of equations of the specified form.
Purpose:
SLALN2 solves a system of the form (ca A - w D ) X = s B
or (ca A**T - w D) X = s B with possible scaling ("s") and
perturbation of A. (A**T means A-transpose.)
A is an NA x NA real matrix, ca is a real scalar, D is an NA x NA
real diagonal matrix, w is a real or complex value, and X and B are
NA x 1 matrices -- real if w is real, complex if w is complex. NA
may be 1 or 2.
If w is complex, X and B are represented as NA x 2 matrices,
the first column of each being the real part and the second
being the imaginary part.
"s" is a scaling factor (<= 1), computed by SLALN2, which is
so chosen that X can be computed without overflow. X is further
scaled if necessary to assure that norm(ca A - w D)*norm(X) is less
than overflow.
If both singular values of (ca A - w D) are less than SMIN,
SMIN*identity will be used instead of (ca A - w D). If only one
singular value is less than SMIN, one element of (ca A - w D) will be
perturbed enough to make the smallest singular value roughly SMIN.
If both singular values are at least SMIN, (ca A - w D) will not be
perturbed. In any case, the perturbation will be at most some small
multiple of max( SMIN, ulp*norm(ca A - w D) ). The singular values
are computed by infinity-norm approximations, and thus will only be
correct to a factor of 2 or so.
Note: all input quantities are assumed to be smaller than overflow
by a reasonable factor. (See BIGNUM.)
Parameters
LTRANS
LTRANS is LOGICAL
=.TRUE.: A-transpose will be used.
=.FALSE.: A will be used (not transposed.)
NA
NA is INTEGER
The size of the matrix A. It may (only) be 1 or 2.
NW
NW is INTEGER
1 if "w" is real, 2 if "w" is complex. It may only be 1
or 2.
SMIN
SMIN is REAL
The desired lower bound on the singular values of A. This
should be a safe distance away from underflow or overflow,
say, between (underflow/machine precision) and (machine
precision * overflow ). (See BIGNUM and ULP.)
CA
CA is REAL
The coefficient c, which A is multiplied by.
A
A is REAL array, dimension (LDA,NA)
The NA x NA matrix A.
LDA
LDA is INTEGER
The leading dimension of A. It must be at least NA.
D1
D1 is REAL
The 1,1 element in the diagonal matrix D.
D2
D2 is REAL
The 2,2 element in the diagonal matrix D. Not used if NA=1.
B
B is REAL array, dimension (LDB,NW)
The NA x NW matrix B (right-hand side). If NW=2 ("w" is
complex), column 1 contains the real part of B and column 2
contains the imaginary part.
LDB
LDB is INTEGER
The leading dimension of B. It must be at least NA.
WR
WR is REAL
The real part of the scalar "w".
WI
WI is REAL
The imaginary part of the scalar "w". Not used if NW=1.
X
X is REAL array, dimension (LDX,NW)
The NA x NW matrix X (unknowns), as computed by SLALN2.
If NW=2 ("w" is complex), on exit, column 1 will contain
the real part of X and column 2 will contain the imaginary
part.
LDX
LDX is INTEGER
The leading dimension of X. It must be at least NA.
SCALE
SCALE is REAL
The scale factor that B must be multiplied by to insure
that overflow does not occur when computing X. Thus,
(ca A - w D) X will be SCALE*B, not B (ignoring
perturbations of A.) It will be at most 1.
XNORM
XNORM is REAL
The infinity-norm of X, when X is regarded as an NA x NW
real matrix.
INFO
INFO is INTEGER
An error flag. It will be set to zero if no error occurs,
a negative number if an argument is in error, or a positive
number if ca A - w D had to be perturbed.
The possible values are:
= 0: No error occurred, and (ca A - w D) did not have to be
perturbed.
= 1: (ca A - w D) had to be perturbed to make its smallest
(or only) singular value greater than SMIN.
NOTE: In the interests of speed, this routine does not
check the inputs for errors.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
real function slangt (character NORM, integer N, real, dimension( * ) DL, real, dimension( * )
D, real, dimension( * ) DU)
SLANGT returns the value of the 1-norm, Frobenius norm, infinity-norm, or the largest
absolute value of any element of a general tridiagonal matrix.
Purpose:
SLANGT returns the value of the one norm, or the Frobenius norm, or
the infinity norm, or the element of largest absolute value of a
real tridiagonal matrix A.
Returns
SLANGT
SLANGT = ( max(abs(A(i,j))), NORM = 'M' or 'm'
(
( norm1(A), NORM = '1', 'O' or 'o'
(
( normI(A), NORM = 'I' or 'i'
(
( normF(A), NORM = 'F', 'f', 'E' or 'e'
where norm1 denotes the one norm of a matrix (maximum column sum),
normI denotes the infinity norm of a matrix (maximum row sum) and
normF denotes the Frobenius norm of a matrix (square root of sum of
squares). Note that max(abs(A(i,j))) is not a consistent matrix norm.
Parameters
NORM
NORM is CHARACTER*1
Specifies the value to be returned in SLANGT as described
above.
N
N is INTEGER
The order of the matrix A. N >= 0. When N = 0, SLANGT is
set to zero.
DL
DL is REAL array, dimension (N-1)
The (n-1) sub-diagonal elements of A.
D
D is REAL array, dimension (N)
The diagonal elements of A.
DU
DU is REAL array, dimension (N-1)
The (n-1) super-diagonal elements of A.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
real function slanhs (character NORM, integer N, real, dimension( lda, * ) A, integer LDA,
real, dimension( * ) WORK)
SLANHS returns the value of the 1-norm, Frobenius norm, infinity-norm, or the largest
absolute value of any element of an upper Hessenberg matrix.
Purpose:
SLANHS returns the value of the one norm, or the Frobenius norm, or
the infinity norm, or the element of largest absolute value of a
Hessenberg matrix A.
Returns
SLANHS
SLANHS = ( max(abs(A(i,j))), NORM = 'M' or 'm'
(
( norm1(A), NORM = '1', 'O' or 'o'
(
( normI(A), NORM = 'I' or 'i'
(
( normF(A), NORM = 'F', 'f', 'E' or 'e'
where norm1 denotes the one norm of a matrix (maximum column sum),
normI denotes the infinity norm of a matrix (maximum row sum) and
normF denotes the Frobenius norm of a matrix (square root of sum of
squares). Note that max(abs(A(i,j))) is not a consistent matrix norm.
Parameters
NORM
NORM is CHARACTER*1
Specifies the value to be returned in SLANHS as described
above.
N
N is INTEGER
The order of the matrix A. N >= 0. When N = 0, SLANHS is
set to zero.
A
A is REAL array, dimension (LDA,N)
The n by n upper Hessenberg matrix A; the part of A below the
first sub-diagonal is not referenced.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(N,1).
WORK
WORK is REAL array, dimension (MAX(1,LWORK)),
where LWORK >= N when NORM = 'I'; otherwise, WORK is not
referenced.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
real function slansb (character NORM, character UPLO, integer N, integer K, real, dimension(
ldab, * ) AB, integer LDAB, real, dimension( * ) WORK)
SLANSB returns the value of the 1-norm, or the Frobenius norm, or the infinity norm, or
the element of largest absolute value of a symmetric band matrix.
Purpose:
SLANSB returns the value of the one norm, or the Frobenius norm, or
the infinity norm, or the element of largest absolute value of an
n by n symmetric band matrix A, with k super-diagonals.
Returns
SLANSB
SLANSB = ( max(abs(A(i,j))), NORM = 'M' or 'm'
(
( norm1(A), NORM = '1', 'O' or 'o'
(
( normI(A), NORM = 'I' or 'i'
(
( normF(A), NORM = 'F', 'f', 'E' or 'e'
where norm1 denotes the one norm of a matrix (maximum column sum),
normI denotes the infinity norm of a matrix (maximum row sum) and
normF denotes the Frobenius norm of a matrix (square root of sum of
squares). Note that max(abs(A(i,j))) is not a consistent matrix norm.
Parameters
NORM
NORM is CHARACTER*1
Specifies the value to be returned in SLANSB as described
above.
UPLO
UPLO is CHARACTER*1
Specifies whether the upper or lower triangular part of the
band matrix A is supplied.
= 'U': Upper triangular part is supplied
= 'L': Lower triangular part is supplied
N
N is INTEGER
The order of the matrix A. N >= 0. When N = 0, SLANSB is
set to zero.
K
K is INTEGER
The number of super-diagonals or sub-diagonals of the
band matrix A. K >= 0.
AB
AB is REAL array, dimension (LDAB,N)
The upper or lower triangle of the symmetric band matrix A,
stored in the first K+1 rows of AB. The j-th column of A is
stored in the j-th column of the array AB as follows:
if UPLO = 'U', AB(k+1+i-j,j) = A(i,j) for max(1,j-k)<=i<=j;
if UPLO = 'L', AB(1+i-j,j) = A(i,j) for j<=i<=min(n,j+k).
LDAB
LDAB is INTEGER
The leading dimension of the array AB. LDAB >= K+1.
WORK
WORK is REAL array, dimension (MAX(1,LWORK)),
where LWORK >= N when NORM = 'I' or '1' or 'O'; otherwise,
WORK is not referenced.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
real function slansp (character NORM, character UPLO, integer N, real, dimension( * ) AP,
real, dimension( * ) WORK)
SLANSP returns the value of the 1-norm, or the Frobenius norm, or the infinity norm, or
the element of largest absolute value of a symmetric matrix supplied in packed form.
Purpose:
SLANSP returns the value of the one norm, or the Frobenius norm, or
the infinity norm, or the element of largest absolute value of a
real symmetric matrix A, supplied in packed form.
Returns
SLANSP
SLANSP = ( max(abs(A(i,j))), NORM = 'M' or 'm'
(
( norm1(A), NORM = '1', 'O' or 'o'
(
( normI(A), NORM = 'I' or 'i'
(
( normF(A), NORM = 'F', 'f', 'E' or 'e'
where norm1 denotes the one norm of a matrix (maximum column sum),
normI denotes the infinity norm of a matrix (maximum row sum) and
normF denotes the Frobenius norm of a matrix (square root of sum of
squares). Note that max(abs(A(i,j))) is not a consistent matrix norm.
Parameters
NORM
NORM is CHARACTER*1
Specifies the value to be returned in SLANSP as described
above.
UPLO
UPLO is CHARACTER*1
Specifies whether the upper or lower triangular part of the
symmetric matrix A is supplied.
= 'U': Upper triangular part of A is supplied
= 'L': Lower triangular part of A is supplied
N
N is INTEGER
The order of the matrix A. N >= 0. When N = 0, SLANSP is
set to zero.
AP
AP is REAL array, dimension (N*(N+1)/2)
The upper or lower triangle of the symmetric matrix A, packed
columnwise in a linear array. The j-th column of A is stored
in the array AP as follows:
if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
WORK
WORK is REAL array, dimension (MAX(1,LWORK)),
where LWORK >= N when NORM = 'I' or '1' or 'O'; otherwise,
WORK is not referenced.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
real function slantb (character NORM, character UPLO, character DIAG, integer N, integer K,
real, dimension( ldab, * ) AB, integer LDAB, real, dimension( * ) WORK)
SLANTB returns the value of the 1-norm, or the Frobenius norm, or the infinity norm, or
the element of largest absolute value of a triangular band matrix.
Purpose:
SLANTB returns the value of the one norm, or the Frobenius norm, or
the infinity norm, or the element of largest absolute value of an
n by n triangular band matrix A, with ( k + 1 ) diagonals.
Returns
SLANTB
SLANTB = ( max(abs(A(i,j))), NORM = 'M' or 'm'
(
( norm1(A), NORM = '1', 'O' or 'o'
(
( normI(A), NORM = 'I' or 'i'
(
( normF(A), NORM = 'F', 'f', 'E' or 'e'
where norm1 denotes the one norm of a matrix (maximum column sum),
normI denotes the infinity norm of a matrix (maximum row sum) and
normF denotes the Frobenius norm of a matrix (square root of sum of
squares). Note that max(abs(A(i,j))) is not a consistent matrix norm.
Parameters
NORM
NORM is CHARACTER*1
Specifies the value to be returned in SLANTB as described
above.
UPLO
UPLO is CHARACTER*1
Specifies whether the matrix A is upper or lower triangular.
= 'U': Upper triangular
= 'L': Lower triangular
DIAG
DIAG is CHARACTER*1
Specifies whether or not the matrix A is unit triangular.
= 'N': Non-unit triangular
= 'U': Unit triangular
N
N is INTEGER
The order of the matrix A. N >= 0. When N = 0, SLANTB is
set to zero.
K
K is INTEGER
The number of super-diagonals of the matrix A if UPLO = 'U',
or the number of sub-diagonals of the matrix A if UPLO = 'L'.
K >= 0.
AB
AB is REAL array, dimension (LDAB,N)
The upper or lower triangular band matrix A, stored in the
first k+1 rows of AB. The j-th column of A is stored
in the j-th column of the array AB as follows:
if UPLO = 'U', AB(k+1+i-j,j) = A(i,j) for max(1,j-k)<=i<=j;
if UPLO = 'L', AB(1+i-j,j) = A(i,j) for j<=i<=min(n,j+k).
Note that when DIAG = 'U', the elements of the array AB
corresponding to the diagonal elements of the matrix A are
not referenced, but are assumed to be one.
LDAB
LDAB is INTEGER
The leading dimension of the array AB. LDAB >= K+1.
WORK
WORK is REAL array, dimension (MAX(1,LWORK)),
where LWORK >= N when NORM = 'I'; otherwise, WORK is not
referenced.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
real function slantp (character NORM, character UPLO, character DIAG, integer N, real,
dimension( * ) AP, real, dimension( * ) WORK)
SLANTP returns the value of the 1-norm, or the Frobenius norm, or the infinity norm, or
the element of largest absolute value of a triangular matrix supplied in packed form.
Purpose:
SLANTP returns the value of the one norm, or the Frobenius norm, or
the infinity norm, or the element of largest absolute value of a
triangular matrix A, supplied in packed form.
Returns
SLANTP
SLANTP = ( max(abs(A(i,j))), NORM = 'M' or 'm'
(
( norm1(A), NORM = '1', 'O' or 'o'
(
( normI(A), NORM = 'I' or 'i'
(
( normF(A), NORM = 'F', 'f', 'E' or 'e'
where norm1 denotes the one norm of a matrix (maximum column sum),
normI denotes the infinity norm of a matrix (maximum row sum) and
normF denotes the Frobenius norm of a matrix (square root of sum of
squares). Note that max(abs(A(i,j))) is not a consistent matrix norm.
Parameters
NORM
NORM is CHARACTER*1
Specifies the value to be returned in SLANTP as described
above.
UPLO
UPLO is CHARACTER*1
Specifies whether the matrix A is upper or lower triangular.
= 'U': Upper triangular
= 'L': Lower triangular
DIAG
DIAG is CHARACTER*1
Specifies whether or not the matrix A is unit triangular.
= 'N': Non-unit triangular
= 'U': Unit triangular
N
N is INTEGER
The order of the matrix A. N >= 0. When N = 0, SLANTP is
set to zero.
AP
AP is REAL array, dimension (N*(N+1)/2)
The upper or lower triangular matrix A, packed columnwise in
a linear array. The j-th column of A is stored in the array
AP as follows:
if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
Note that when DIAG = 'U', the elements of the array AP
corresponding to the diagonal elements of the matrix A are
not referenced, but are assumed to be one.
WORK
WORK is REAL array, dimension (MAX(1,LWORK)),
where LWORK >= N when NORM = 'I'; otherwise, WORK is not
referenced.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
real function slantr (character NORM, character UPLO, character DIAG, integer M, integer N,
real, dimension( lda, * ) A, integer LDA, real, dimension( * ) WORK)
SLANTR returns the value of the 1-norm, or the Frobenius norm, or the infinity norm, or
the element of largest absolute value of a trapezoidal or triangular matrix.
Purpose:
SLANTR returns the value of the one norm, or the Frobenius norm, or
the infinity norm, or the element of largest absolute value of a
trapezoidal or triangular matrix A.
Returns
SLANTR
SLANTR = ( max(abs(A(i,j))), NORM = 'M' or 'm'
(
( norm1(A), NORM = '1', 'O' or 'o'
(
( normI(A), NORM = 'I' or 'i'
(
( normF(A), NORM = 'F', 'f', 'E' or 'e'
where norm1 denotes the one norm of a matrix (maximum column sum),
normI denotes the infinity norm of a matrix (maximum row sum) and
normF denotes the Frobenius norm of a matrix (square root of sum of
squares). Note that max(abs(A(i,j))) is not a consistent matrix norm.
Parameters
NORM
NORM is CHARACTER*1
Specifies the value to be returned in SLANTR as described
above.
UPLO
UPLO is CHARACTER*1
Specifies whether the matrix A is upper or lower trapezoidal.
= 'U': Upper trapezoidal
= 'L': Lower trapezoidal
Note that A is triangular instead of trapezoidal if M = N.
DIAG
DIAG is CHARACTER*1
Specifies whether or not the matrix A has unit diagonal.
= 'N': Non-unit diagonal
= 'U': Unit diagonal
M
M is INTEGER
The number of rows of the matrix A. M >= 0, and if
UPLO = 'U', M <= N. When M = 0, SLANTR is set to zero.
N
N is INTEGER
The number of columns of the matrix A. N >= 0, and if
UPLO = 'L', N <= M. When N = 0, SLANTR is set to zero.
A
A is REAL array, dimension (LDA,N)
The trapezoidal matrix A (A is triangular if M = N).
If UPLO = 'U', the leading m by n upper trapezoidal part of
the array A contains the upper trapezoidal matrix, and the
strictly lower triangular part of A is not referenced.
If UPLO = 'L', the leading m by n lower trapezoidal part of
the array A contains the lower trapezoidal matrix, and the
strictly upper triangular part of A is not referenced. Note
that when DIAG = 'U', the diagonal elements of A are not
referenced and are assumed to be one.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(M,1).
WORK
WORK is REAL array, dimension (MAX(1,LWORK)),
where LWORK >= M when NORM = 'I'; otherwise, WORK is not
referenced.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slanv2 (real A, real B, real C, real D, real RT1R, real RT1I, real RT2R, real RT2I,
real CS, real SN)
SLANV2 computes the Schur factorization of a real 2-by-2 nonsymmetric matrix in standard
form.
Purpose:
SLANV2 computes the Schur factorization of a real 2-by-2 nonsymmetric
matrix in standard form:
[ A B ] = [ CS -SN ] [ AA BB ] [ CS SN ]
[ C D ] [ SN CS ] [ CC DD ] [-SN CS ]
where either
1) CC = 0 so that AA and DD are real eigenvalues of the matrix, or
2) AA = DD and BB*CC < 0, so that AA + or - sqrt(BB*CC) are complex
conjugate eigenvalues.
Parameters
A
A is REAL
B
B is REAL
C
C is REAL
D
D is REAL
On entry, the elements of the input matrix.
On exit, they are overwritten by the elements of the
standardised Schur form.
RT1R
RT1R is REAL
RT1I
RT1I is REAL
RT2R
RT2R is REAL
RT2I
RT2I is REAL
The real and imaginary parts of the eigenvalues. If the
eigenvalues are a complex conjugate pair, RT1I > 0.
CS
CS is REAL
SN
SN is REAL
Parameters of the rotation matrix.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Modified by V. Sima, Research Institute for Informatics, Bucharest,
Romania, to reduce the risk of cancellation errors,
when computing real eigenvalues, and to ensure, if possible, that
abs(RT1R) >= abs(RT2R).
subroutine slapll (integer N, real, dimension( * ) X, integer INCX, real, dimension( * ) Y,
integer INCY, real SSMIN)
SLAPLL measures the linear dependence of two vectors.
Purpose:
Given two column vectors X and Y, let
A = ( X Y ).
The subroutine first computes the QR factorization of A = Q*R,
and then computes the SVD of the 2-by-2 upper triangular matrix R.
The smaller singular value of R is returned in SSMIN, which is used
as the measurement of the linear dependency of the vectors X and Y.
Parameters
N
N is INTEGER
The length of the vectors X and Y.
X
X is REAL array,
dimension (1+(N-1)*INCX)
On entry, X contains the N-vector X.
On exit, X is overwritten.
INCX
INCX is INTEGER
The increment between successive elements of X. INCX > 0.
Y
Y is REAL array,
dimension (1+(N-1)*INCY)
On entry, Y contains the N-vector Y.
On exit, Y is overwritten.
INCY
INCY is INTEGER
The increment between successive elements of Y. INCY > 0.
SSMIN
SSMIN is REAL
The smallest singular value of the N-by-2 matrix A = ( X Y ).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slapmr (logical FORWRD, integer M, integer N, real, dimension( ldx, * ) X, integer
LDX, integer, dimension( * ) K)
SLAPMR rearranges rows of a matrix as specified by a permutation vector.
Purpose:
SLAPMR rearranges the rows of the M by N matrix X as specified
by the permutation K(1),K(2),...,K(M) of the integers 1,...,M.
If FORWRD = .TRUE., forward permutation:
X(K(I),*) is moved X(I,*) for I = 1,2,...,M.
If FORWRD = .FALSE., backward permutation:
X(I,*) is moved to X(K(I),*) for I = 1,2,...,M.
Parameters
FORWRD
FORWRD is LOGICAL
= .TRUE., forward permutation
= .FALSE., backward permutation
M
M is INTEGER
The number of rows of the matrix X. M >= 0.
N
N is INTEGER
The number of columns of the matrix X. N >= 0.
X
X is REAL array, dimension (LDX,N)
On entry, the M by N matrix X.
On exit, X contains the permuted matrix X.
LDX
LDX is INTEGER
The leading dimension of the array X, LDX >= MAX(1,M).
K
K is INTEGER array, dimension (M)
On entry, K contains the permutation vector. K is used as
internal workspace, but reset to its original value on
output.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slapmt (logical FORWRD, integer M, integer N, real, dimension( ldx, * ) X, integer
LDX, integer, dimension( * ) K)
SLAPMT performs a forward or backward permutation of the columns of a matrix.
Purpose:
SLAPMT rearranges the columns of the M by N matrix X as specified
by the permutation K(1),K(2),...,K(N) of the integers 1,...,N.
If FORWRD = .TRUE., forward permutation:
X(*,K(J)) is moved X(*,J) for J = 1,2,...,N.
If FORWRD = .FALSE., backward permutation:
X(*,J) is moved to X(*,K(J)) for J = 1,2,...,N.
Parameters
FORWRD
FORWRD is LOGICAL
= .TRUE., forward permutation
= .FALSE., backward permutation
M
M is INTEGER
The number of rows of the matrix X. M >= 0.
N
N is INTEGER
The number of columns of the matrix X. N >= 0.
X
X is REAL array, dimension (LDX,N)
On entry, the M by N matrix X.
On exit, X contains the permuted matrix X.
LDX
LDX is INTEGER
The leading dimension of the array X, LDX >= MAX(1,M).
K
K is INTEGER array, dimension (N)
On entry, K contains the permutation vector. K is used as
internal workspace, but reset to its original value on
output.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slaqp2 (integer M, integer N, integer OFFSET, real, dimension( lda, * ) A, integer
LDA, integer, dimension( * ) JPVT, real, dimension( * ) TAU, real, dimension( * ) VN1,
real, dimension( * ) VN2, real, dimension( * ) WORK)
SLAQP2 computes a QR factorization with column pivoting of the matrix block.
Purpose:
SLAQP2 computes a QR factorization with column pivoting of
the block A(OFFSET+1:M,1:N).
The block A(1:OFFSET,1:N) is accordingly pivoted, but not factorized.
Parameters
M
M is INTEGER
The number of rows of the matrix A. M >= 0.
N
N is INTEGER
The number of columns of the matrix A. N >= 0.
OFFSET
OFFSET is INTEGER
The number of rows of the matrix A that must be pivoted
but no factorized. OFFSET >= 0.
A
A is REAL array, dimension (LDA,N)
On entry, the M-by-N matrix A.
On exit, the upper triangle of block A(OFFSET+1:M,1:N) is
the triangular factor obtained; the elements in block
A(OFFSET+1:M,1:N) below the diagonal, together with the
array TAU, represent the orthogonal matrix Q as a product of
elementary reflectors. Block A(1:OFFSET,1:N) has been
accordingly pivoted, but no factorized.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,M).
JPVT
JPVT is INTEGER array, dimension (N)
On entry, if JPVT(i) .ne. 0, the i-th column of A is permuted
to the front of A*P (a leading column); if JPVT(i) = 0,
the i-th column of A is a free column.
On exit, if JPVT(i) = k, then the i-th column of A*P
was the k-th column of A.
TAU
TAU is REAL array, dimension (min(M,N))
The scalar factors of the elementary reflectors.
VN1
VN1 is REAL array, dimension (N)
The vector with the partial column norms.
VN2
VN2 is REAL array, dimension (N)
The vector with the exact column norms.
WORK
WORK is REAL array, dimension (N)
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
G. Quintana-Orti, Depto. de Informatica, Universidad Jaime I, Spain X. Sun, Computer
Science Dept., Duke University, USA
Partial column norm updating strategy modified on April 2011 Z. Drmac and Z.
Bujanovic, Dept. of Mathematics, University of Zagreb, Croatia.
References:
LAPACK Working Note 176
subroutine slaqps (integer M, integer N, integer OFFSET, integer NB, integer KB, real,
dimension( lda, * ) A, integer LDA, integer, dimension( * ) JPVT, real, dimension( * )
TAU, real, dimension( * ) VN1, real, dimension( * ) VN2, real, dimension( * ) AUXV, real,
dimension( ldf, * ) F, integer LDF)
SLAQPS computes a step of QR factorization with column pivoting of a real m-by-n matrix A
by using BLAS level 3.
Purpose:
SLAQPS computes a step of QR factorization with column pivoting
of a real M-by-N matrix A by using Blas-3. It tries to factorize
NB columns from A starting from the row OFFSET+1, and updates all
of the matrix with Blas-3 xGEMM.
In some cases, due to catastrophic cancellations, it cannot
factorize NB columns. Hence, the actual number of factorized
columns is returned in KB.
Block A(1:OFFSET,1:N) is accordingly pivoted, but not factorized.
Parameters
M
M is INTEGER
The number of rows of the matrix A. M >= 0.
N
N is INTEGER
The number of columns of the matrix A. N >= 0
OFFSET
OFFSET is INTEGER
The number of rows of A that have been factorized in
previous steps.
NB
NB is INTEGER
The number of columns to factorize.
KB
KB is INTEGER
The number of columns actually factorized.
A
A is REAL array, dimension (LDA,N)
On entry, the M-by-N matrix A.
On exit, block A(OFFSET+1:M,1:KB) is the triangular
factor obtained and block A(1:OFFSET,1:N) has been
accordingly pivoted, but no factorized.
The rest of the matrix, block A(OFFSET+1:M,KB+1:N) has
been updated.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,M).
JPVT
JPVT is INTEGER array, dimension (N)
JPVT(I) = K <==> Column K of the full matrix A has been
permuted into position I in AP.
TAU
TAU is REAL array, dimension (KB)
The scalar factors of the elementary reflectors.
VN1
VN1 is REAL array, dimension (N)
The vector with the partial column norms.
VN2
VN2 is REAL array, dimension (N)
The vector with the exact column norms.
AUXV
AUXV is REAL array, dimension (NB)
Auxiliary vector.
F
F is REAL array, dimension (LDF,NB)
Matrix F**T = L*Y**T*A.
LDF
LDF is INTEGER
The leading dimension of the array F. LDF >= max(1,N).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
G. Quintana-Orti, Depto. de Informatica, Universidad Jaime I, Spain X. Sun, Computer
Science Dept., Duke University, USA
Partial column norm updating strategy modified on April 2011 Z. Drmac and Z. Bujanovic,
Dept. of Mathematics, University of Zagreb, Croatia.
References:
LAPACK Working Note 176
subroutine slaqr0 (logical WANTT, logical WANTZ, integer N, integer ILO, integer IHI, real,
dimension( ldh, * ) H, integer LDH, real, dimension( * ) WR, real, dimension( * ) WI,
integer ILOZ, integer IHIZ, real, dimension( ldz, * ) Z, integer LDZ, real, dimension( * )
WORK, integer LWORK, integer INFO)
SLAQR0 computes the eigenvalues of a Hessenberg matrix, and optionally the matrices from
the Schur decomposition.
Purpose:
SLAQR0 computes the eigenvalues of a Hessenberg matrix H
and, optionally, the matrices T and Z from the Schur decomposition
H = Z T Z**T, where T is an upper quasi-triangular matrix (the
Schur form), and Z is the orthogonal matrix of Schur vectors.
Optionally Z may be postmultiplied into an input orthogonal
matrix Q so that this routine can give the Schur factorization
of a matrix A which has been reduced to the Hessenberg form H
by the orthogonal matrix Q: A = Q*H*Q**T = (QZ)*T*(QZ)**T.
Parameters
WANTT
WANTT is LOGICAL
= .TRUE. : the full Schur form T is required;
= .FALSE.: only eigenvalues are required.
WANTZ
WANTZ is LOGICAL
= .TRUE. : the matrix of Schur vectors Z is required;
= .FALSE.: Schur vectors are not required.
N
N is INTEGER
The order of the matrix H. N >= 0.
ILO
ILO is INTEGER
IHI
IHI is INTEGER
It is assumed that H is already upper triangular in rows
and columns 1:ILO-1 and IHI+1:N and, if ILO > 1,
H(ILO,ILO-1) is zero. ILO and IHI are normally set by a
previous call to SGEBAL, and then passed to SGEHRD when the
matrix output by SGEBAL is reduced to Hessenberg form.
Otherwise, ILO and IHI should be set to 1 and N,
respectively. If N > 0, then 1 <= ILO <= IHI <= N.
If N = 0, then ILO = 1 and IHI = 0.
H
H is REAL array, dimension (LDH,N)
On entry, the upper Hessenberg matrix H.
On exit, if INFO = 0 and WANTT is .TRUE., then H contains
the upper quasi-triangular matrix T from the Schur
decomposition (the Schur form); 2-by-2 diagonal blocks
(corresponding to complex conjugate pairs of eigenvalues)
are returned in standard form, with H(i,i) = H(i+1,i+1)
and H(i+1,i)*H(i,i+1) < 0. If INFO = 0 and WANTT is
.FALSE., then the contents of H are unspecified on exit.
(The output value of H when INFO > 0 is given under the
description of INFO below.)
This subroutine may explicitly set H(i,j) = 0 for i > j and
j = 1, 2, ... ILO-1 or j = IHI+1, IHI+2, ... N.
LDH
LDH is INTEGER
The leading dimension of the array H. LDH >= max(1,N).
WR
WR is REAL array, dimension (IHI)
WI
WI is REAL array, dimension (IHI)
The real and imaginary parts, respectively, of the computed
eigenvalues of H(ILO:IHI,ILO:IHI) are stored in WR(ILO:IHI)
and WI(ILO:IHI). If two eigenvalues are computed as a
complex conjugate pair, they are stored in consecutive
elements of WR and WI, say the i-th and (i+1)th, with
WI(i) > 0 and WI(i+1) < 0. If WANTT is .TRUE., then
the eigenvalues are stored in the same order as on the
diagonal of the Schur form returned in H, with
WR(i) = H(i,i) and, if H(i:i+1,i:i+1) is a 2-by-2 diagonal
block, WI(i) = sqrt(-H(i+1,i)*H(i,i+1)) and
WI(i+1) = -WI(i).
ILOZ
ILOZ is INTEGER
IHIZ
IHIZ is INTEGER
Specify the rows of Z to which transformations must be
applied if WANTZ is .TRUE..
1 <= ILOZ <= ILO; IHI <= IHIZ <= N.
Z
Z is REAL array, dimension (LDZ,IHI)
If WANTZ is .FALSE., then Z is not referenced.
If WANTZ is .TRUE., then Z(ILO:IHI,ILOZ:IHIZ) is
replaced by Z(ILO:IHI,ILOZ:IHIZ)*U where U is the
orthogonal Schur factor of H(ILO:IHI,ILO:IHI).
(The output value of Z when INFO > 0 is given under
the description of INFO below.)
LDZ
LDZ is INTEGER
The leading dimension of the array Z. if WANTZ is .TRUE.
then LDZ >= MAX(1,IHIZ). Otherwise, LDZ >= 1.
WORK
WORK is REAL array, dimension LWORK
On exit, if LWORK = -1, WORK(1) returns an estimate of
the optimal value for LWORK.
LWORK
LWORK is INTEGER
The dimension of the array WORK. LWORK >= max(1,N)
is sufficient, but LWORK typically as large as 6*N may
be required for optimal performance. A workspace query
to determine the optimal workspace size is recommended.
If LWORK = -1, then SLAQR0 does a workspace query.
In this case, SLAQR0 checks the input parameters and
estimates the optimal workspace size for the given
values of N, ILO and IHI. The estimate is returned
in WORK(1). No error message related to LWORK is
issued by XERBLA. Neither H nor Z are accessed.
INFO
INFO is INTEGER
= 0: successful exit
> 0: if INFO = i, SLAQR0 failed to compute all of
the eigenvalues. Elements 1:ilo-1 and i+1:n of WR
and WI contain those eigenvalues which have been
successfully computed. (Failures are rare.)
If INFO > 0 and WANT is .FALSE., then on exit,
the remaining unconverged eigenvalues are the eigen-
values of the upper Hessenberg matrix rows and
columns ILO through INFO of the final, output
value of H.
If INFO > 0 and WANTT is .TRUE., then on exit
(*) (initial value of H)*U = U*(final value of H)
where U is an orthogonal matrix. The final
value of H is upper Hessenberg and quasi-triangular
in rows and columns INFO+1 through IHI.
If INFO > 0 and WANTZ is .TRUE., then on exit
(final value of Z(ILO:IHI,ILOZ:IHIZ)
= (initial value of Z(ILO:IHI,ILOZ:IHIZ)*U
where U is the orthogonal matrix in (*) (regard-
less of the value of WANTT.)
If INFO > 0 and WANTZ is .FALSE., then Z is not
accessed.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
Karen Braman and Ralph Byers, Department of Mathematics, University of Kansas, USA
References:
K. Braman, R. Byers and R. Mathias, The Multi-Shift QR
Algorithm Part I: Maintaining Well Focused Shifts, and Level 3
Performance, SIAM Journal of Matrix Analysis, volume 23, pages
929--947, 2002.
K. Braman, R. Byers and R. Mathias, The Multi-Shift QR Algorithm Part II: Aggressive
Early Deflation, SIAM Journal of Matrix Analysis, volume 23, pages 948--973, 2002.
subroutine slaqr1 (integer N, real, dimension( ldh, * ) H, integer LDH, real SR1, real SI1,
real SR2, real SI2, real, dimension( * ) V)
SLAQR1 sets a scalar multiple of the first column of the product of 2-by-2 or 3-by-3
matrix H and specified shifts.
Purpose:
Given a 2-by-2 or 3-by-3 matrix H, SLAQR1 sets v to a
scalar multiple of the first column of the product
(*) K = (H - (sr1 + i*si1)*I)*(H - (sr2 + i*si2)*I)
scaling to avoid overflows and most underflows. It
is assumed that either
1) sr1 = sr2 and si1 = -si2
or
2) si1 = si2 = 0.
This is useful for starting double implicit shift bulges
in the QR algorithm.
Parameters
N
N is INTEGER
Order of the matrix H. N must be either 2 or 3.
H
H is REAL array, dimension (LDH,N)
The 2-by-2 or 3-by-3 matrix H in (*).
LDH
LDH is INTEGER
The leading dimension of H as declared in
the calling procedure. LDH >= N
SR1
SR1 is REAL
SI1
SI1 is REAL
SR2
SR2 is REAL
SI2
SI2 is REAL
The shifts in (*).
V
V is REAL array, dimension (N)
A scalar multiple of the first column of the
matrix K in (*).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
Karen Braman and Ralph Byers, Department of Mathematics, University of Kansas, USA
subroutine slaqr2 (logical WANTT, logical WANTZ, integer N, integer KTOP, integer KBOT,
integer NW, real, dimension( ldh, * ) H, integer LDH, integer ILOZ, integer IHIZ, real,
dimension( ldz, * ) Z, integer LDZ, integer NS, integer ND, real, dimension( * ) SR, real,
dimension( * ) SI, real, dimension( ldv, * ) V, integer LDV, integer NH, real, dimension(
ldt, * ) T, integer LDT, integer NV, real, dimension( ldwv, * ) WV, integer LDWV, real,
dimension( * ) WORK, integer LWORK)
SLAQR2 performs the orthogonal similarity transformation of a Hessenberg matrix to detect
and deflate fully converged eigenvalues from a trailing principal submatrix (aggressive
early deflation).
Purpose:
SLAQR2 is identical to SLAQR3 except that it avoids
recursion by calling SLAHQR instead of SLAQR4.
Aggressive early deflation:
This subroutine accepts as input an upper Hessenberg matrix
H and performs an orthogonal similarity transformation
designed to detect and deflate fully converged eigenvalues from
a trailing principal submatrix. On output H has been over-
written by a new Hessenberg matrix that is a perturbation of
an orthogonal similarity transformation of H. It is to be
hoped that the final version of H has many zero subdiagonal
entries.
Parameters
WANTT
WANTT is LOGICAL
If .TRUE., then the Hessenberg matrix H is fully updated
so that the quasi-triangular Schur factor may be
computed (in cooperation with the calling subroutine).
If .FALSE., then only enough of H is updated to preserve
the eigenvalues.
WANTZ
WANTZ is LOGICAL
If .TRUE., then the orthogonal matrix Z is updated so
so that the orthogonal Schur factor may be computed
(in cooperation with the calling subroutine).
If .FALSE., then Z is not referenced.
N
N is INTEGER
The order of the matrix H and (if WANTZ is .TRUE.) the
order of the orthogonal matrix Z.
KTOP
KTOP is INTEGER
It is assumed that either KTOP = 1 or H(KTOP,KTOP-1)=0.
KBOT and KTOP together determine an isolated block
along the diagonal of the Hessenberg matrix.
KBOT
KBOT is INTEGER
It is assumed without a check that either
KBOT = N or H(KBOT+1,KBOT)=0. KBOT and KTOP together
determine an isolated block along the diagonal of the
Hessenberg matrix.
NW
NW is INTEGER
Deflation window size. 1 <= NW <= (KBOT-KTOP+1).
H
H is REAL array, dimension (LDH,N)
On input the initial N-by-N section of H stores the
Hessenberg matrix undergoing aggressive early deflation.
On output H has been transformed by an orthogonal
similarity transformation, perturbed, and the returned
to Hessenberg form that (it is to be hoped) has some
zero subdiagonal entries.
LDH
LDH is INTEGER
Leading dimension of H just as declared in the calling
subroutine. N <= LDH
ILOZ
ILOZ is INTEGER
IHIZ
IHIZ is INTEGER
Specify the rows of Z to which transformations must be
applied if WANTZ is .TRUE.. 1 <= ILOZ <= IHIZ <= N.
Z
Z is REAL array, dimension (LDZ,N)
IF WANTZ is .TRUE., then on output, the orthogonal
similarity transformation mentioned above has been
accumulated into Z(ILOZ:IHIZ,ILOZ:IHIZ) from the right.
If WANTZ is .FALSE., then Z is unreferenced.
LDZ
LDZ is INTEGER
The leading dimension of Z just as declared in the
calling subroutine. 1 <= LDZ.
NS
NS is INTEGER
The number of unconverged (ie approximate) eigenvalues
returned in SR and SI that may be used as shifts by the
calling subroutine.
ND
ND is INTEGER
The number of converged eigenvalues uncovered by this
subroutine.
SR
SR is REAL array, dimension (KBOT)
SI
SI is REAL array, dimension (KBOT)
On output, the real and imaginary parts of approximate
eigenvalues that may be used for shifts are stored in
SR(KBOT-ND-NS+1) through SR(KBOT-ND) and
SI(KBOT-ND-NS+1) through SI(KBOT-ND), respectively.
The real and imaginary parts of converged eigenvalues
are stored in SR(KBOT-ND+1) through SR(KBOT) and
SI(KBOT-ND+1) through SI(KBOT), respectively.
V
V is REAL array, dimension (LDV,NW)
An NW-by-NW work array.
LDV
LDV is INTEGER
The leading dimension of V just as declared in the
calling subroutine. NW <= LDV
NH
NH is INTEGER
The number of columns of T. NH >= NW.
T
T is REAL array, dimension (LDT,NW)
LDT
LDT is INTEGER
The leading dimension of T just as declared in the
calling subroutine. NW <= LDT
NV
NV is INTEGER
The number of rows of work array WV available for
workspace. NV >= NW.
WV
WV is REAL array, dimension (LDWV,NW)
LDWV
LDWV is INTEGER
The leading dimension of W just as declared in the
calling subroutine. NW <= LDV
WORK
WORK is REAL array, dimension (LWORK)
On exit, WORK(1) is set to an estimate of the optimal value
of LWORK for the given values of N, NW, KTOP and KBOT.
LWORK
LWORK is INTEGER
The dimension of the work array WORK. LWORK = 2*NW
suffices, but greater efficiency may result from larger
values of LWORK.
If LWORK = -1, then a workspace query is assumed; SLAQR2
only estimates the optimal workspace size for the given
values of N, NW, KTOP and KBOT. The estimate is returned
in WORK(1). No error message related to LWORK is issued
by XERBLA. Neither H nor Z are accessed.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
Karen Braman and Ralph Byers, Department of Mathematics, University of Kansas, USA
subroutine slaqr3 (logical WANTT, logical WANTZ, integer N, integer KTOP, integer KBOT,
integer NW, real, dimension( ldh, * ) H, integer LDH, integer ILOZ, integer IHIZ, real,
dimension( ldz, * ) Z, integer LDZ, integer NS, integer ND, real, dimension( * ) SR, real,
dimension( * ) SI, real, dimension( ldv, * ) V, integer LDV, integer NH, real, dimension(
ldt, * ) T, integer LDT, integer NV, real, dimension( ldwv, * ) WV, integer LDWV, real,
dimension( * ) WORK, integer LWORK)
SLAQR3 performs the orthogonal similarity transformation of a Hessenberg matrix to detect
and deflate fully converged eigenvalues from a trailing principal submatrix (aggressive
early deflation).
Purpose:
Aggressive early deflation:
SLAQR3 accepts as input an upper Hessenberg matrix
H and performs an orthogonal similarity transformation
designed to detect and deflate fully converged eigenvalues from
a trailing principal submatrix. On output H has been over-
written by a new Hessenberg matrix that is a perturbation of
an orthogonal similarity transformation of H. It is to be
hoped that the final version of H has many zero subdiagonal
entries.
Parameters
WANTT
WANTT is LOGICAL
If .TRUE., then the Hessenberg matrix H is fully updated
so that the quasi-triangular Schur factor may be
computed (in cooperation with the calling subroutine).
If .FALSE., then only enough of H is updated to preserve
the eigenvalues.
WANTZ
WANTZ is LOGICAL
If .TRUE., then the orthogonal matrix Z is updated so
so that the orthogonal Schur factor may be computed
(in cooperation with the calling subroutine).
If .FALSE., then Z is not referenced.
N
N is INTEGER
The order of the matrix H and (if WANTZ is .TRUE.) the
order of the orthogonal matrix Z.
KTOP
KTOP is INTEGER
It is assumed that either KTOP = 1 or H(KTOP,KTOP-1)=0.
KBOT and KTOP together determine an isolated block
along the diagonal of the Hessenberg matrix.
KBOT
KBOT is INTEGER
It is assumed without a check that either
KBOT = N or H(KBOT+1,KBOT)=0. KBOT and KTOP together
determine an isolated block along the diagonal of the
Hessenberg matrix.
NW
NW is INTEGER
Deflation window size. 1 <= NW <= (KBOT-KTOP+1).
H
H is REAL array, dimension (LDH,N)
On input the initial N-by-N section of H stores the
Hessenberg matrix undergoing aggressive early deflation.
On output H has been transformed by an orthogonal
similarity transformation, perturbed, and the returned
to Hessenberg form that (it is to be hoped) has some
zero subdiagonal entries.
LDH
LDH is INTEGER
Leading dimension of H just as declared in the calling
subroutine. N <= LDH
ILOZ
ILOZ is INTEGER
IHIZ
IHIZ is INTEGER
Specify the rows of Z to which transformations must be
applied if WANTZ is .TRUE.. 1 <= ILOZ <= IHIZ <= N.
Z
Z is REAL array, dimension (LDZ,N)
IF WANTZ is .TRUE., then on output, the orthogonal
similarity transformation mentioned above has been
accumulated into Z(ILOZ:IHIZ,ILOZ:IHIZ) from the right.
If WANTZ is .FALSE., then Z is unreferenced.
LDZ
LDZ is INTEGER
The leading dimension of Z just as declared in the
calling subroutine. 1 <= LDZ.
NS
NS is INTEGER
The number of unconverged (ie approximate) eigenvalues
returned in SR and SI that may be used as shifts by the
calling subroutine.
ND
ND is INTEGER
The number of converged eigenvalues uncovered by this
subroutine.
SR
SR is REAL array, dimension (KBOT)
SI
SI is REAL array, dimension (KBOT)
On output, the real and imaginary parts of approximate
eigenvalues that may be used for shifts are stored in
SR(KBOT-ND-NS+1) through SR(KBOT-ND) and
SI(KBOT-ND-NS+1) through SI(KBOT-ND), respectively.
The real and imaginary parts of converged eigenvalues
are stored in SR(KBOT-ND+1) through SR(KBOT) and
SI(KBOT-ND+1) through SI(KBOT), respectively.
V
V is REAL array, dimension (LDV,NW)
An NW-by-NW work array.
LDV
LDV is INTEGER
The leading dimension of V just as declared in the
calling subroutine. NW <= LDV
NH
NH is INTEGER
The number of columns of T. NH >= NW.
T
T is REAL array, dimension (LDT,NW)
LDT
LDT is INTEGER
The leading dimension of T just as declared in the
calling subroutine. NW <= LDT
NV
NV is INTEGER
The number of rows of work array WV available for
workspace. NV >= NW.
WV
WV is REAL array, dimension (LDWV,NW)
LDWV
LDWV is INTEGER
The leading dimension of W just as declared in the
calling subroutine. NW <= LDV
WORK
WORK is REAL array, dimension (LWORK)
On exit, WORK(1) is set to an estimate of the optimal value
of LWORK for the given values of N, NW, KTOP and KBOT.
LWORK
LWORK is INTEGER
The dimension of the work array WORK. LWORK = 2*NW
suffices, but greater efficiency may result from larger
values of LWORK.
If LWORK = -1, then a workspace query is assumed; SLAQR3
only estimates the optimal workspace size for the given
values of N, NW, KTOP and KBOT. The estimate is returned
in WORK(1). No error message related to LWORK is issued
by XERBLA. Neither H nor Z are accessed.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
Karen Braman and Ralph Byers, Department of Mathematics, University of Kansas, USA
subroutine slaqr4 (logical WANTT, logical WANTZ, integer N, integer ILO, integer IHI, real,
dimension( ldh, * ) H, integer LDH, real, dimension( * ) WR, real, dimension( * ) WI,
integer ILOZ, integer IHIZ, real, dimension( ldz, * ) Z, integer LDZ, real, dimension( * )
WORK, integer LWORK, integer INFO)
SLAQR4 computes the eigenvalues of a Hessenberg matrix, and optionally the matrices from
the Schur decomposition.
Purpose:
SLAQR4 implements one level of recursion for SLAQR0.
It is a complete implementation of the small bulge multi-shift
QR algorithm. It may be called by SLAQR0 and, for large enough
deflation window size, it may be called by SLAQR3. This
subroutine is identical to SLAQR0 except that it calls SLAQR2
instead of SLAQR3.
SLAQR4 computes the eigenvalues of a Hessenberg matrix H
and, optionally, the matrices T and Z from the Schur decomposition
H = Z T Z**T, where T is an upper quasi-triangular matrix (the
Schur form), and Z is the orthogonal matrix of Schur vectors.
Optionally Z may be postmultiplied into an input orthogonal
matrix Q so that this routine can give the Schur factorization
of a matrix A which has been reduced to the Hessenberg form H
by the orthogonal matrix Q: A = Q*H*Q**T = (QZ)*T*(QZ)**T.
Parameters
WANTT
WANTT is LOGICAL
= .TRUE. : the full Schur form T is required;
= .FALSE.: only eigenvalues are required.
WANTZ
WANTZ is LOGICAL
= .TRUE. : the matrix of Schur vectors Z is required;
= .FALSE.: Schur vectors are not required.
N
N is INTEGER
The order of the matrix H. N >= 0.
ILO
ILO is INTEGER
IHI
IHI is INTEGER
It is assumed that H is already upper triangular in rows
and columns 1:ILO-1 and IHI+1:N and, if ILO > 1,
H(ILO,ILO-1) is zero. ILO and IHI are normally set by a
previous call to SGEBAL, and then passed to SGEHRD when the
matrix output by SGEBAL is reduced to Hessenberg form.
Otherwise, ILO and IHI should be set to 1 and N,
respectively. If N > 0, then 1 <= ILO <= IHI <= N.
If N = 0, then ILO = 1 and IHI = 0.
H
H is REAL array, dimension (LDH,N)
On entry, the upper Hessenberg matrix H.
On exit, if INFO = 0 and WANTT is .TRUE., then H contains
the upper quasi-triangular matrix T from the Schur
decomposition (the Schur form); 2-by-2 diagonal blocks
(corresponding to complex conjugate pairs of eigenvalues)
are returned in standard form, with H(i,i) = H(i+1,i+1)
and H(i+1,i)*H(i,i+1) < 0. If INFO = 0 and WANTT is
.FALSE., then the contents of H are unspecified on exit.
(The output value of H when INFO > 0 is given under the
description of INFO below.)
This subroutine may explicitly set H(i,j) = 0 for i > j and
j = 1, 2, ... ILO-1 or j = IHI+1, IHI+2, ... N.
LDH
LDH is INTEGER
The leading dimension of the array H. LDH >= max(1,N).
WR
WR is REAL array, dimension (IHI)
WI
WI is REAL array, dimension (IHI)
The real and imaginary parts, respectively, of the computed
eigenvalues of H(ILO:IHI,ILO:IHI) are stored in WR(ILO:IHI)
and WI(ILO:IHI). If two eigenvalues are computed as a
complex conjugate pair, they are stored in consecutive
elements of WR and WI, say the i-th and (i+1)th, with
WI(i) > 0 and WI(i+1) < 0. If WANTT is .TRUE., then
the eigenvalues are stored in the same order as on the
diagonal of the Schur form returned in H, with
WR(i) = H(i,i) and, if H(i:i+1,i:i+1) is a 2-by-2 diagonal
block, WI(i) = sqrt(-H(i+1,i)*H(i,i+1)) and
WI(i+1) = -WI(i).
ILOZ
ILOZ is INTEGER
IHIZ
IHIZ is INTEGER
Specify the rows of Z to which transformations must be
applied if WANTZ is .TRUE..
1 <= ILOZ <= ILO; IHI <= IHIZ <= N.
Z
Z is REAL array, dimension (LDZ,IHI)
If WANTZ is .FALSE., then Z is not referenced.
If WANTZ is .TRUE., then Z(ILO:IHI,ILOZ:IHIZ) is
replaced by Z(ILO:IHI,ILOZ:IHIZ)*U where U is the
orthogonal Schur factor of H(ILO:IHI,ILO:IHI).
(The output value of Z when INFO > 0 is given under
the description of INFO below.)
LDZ
LDZ is INTEGER
The leading dimension of the array Z. if WANTZ is .TRUE.
then LDZ >= MAX(1,IHIZ). Otherwise, LDZ >= 1.
WORK
WORK is REAL array, dimension LWORK
On exit, if LWORK = -1, WORK(1) returns an estimate of
the optimal value for LWORK.
LWORK
LWORK is INTEGER
The dimension of the array WORK. LWORK >= max(1,N)
is sufficient, but LWORK typically as large as 6*N may
be required for optimal performance. A workspace query
to determine the optimal workspace size is recommended.
If LWORK = -1, then SLAQR4 does a workspace query.
In this case, SLAQR4 checks the input parameters and
estimates the optimal workspace size for the given
values of N, ILO and IHI. The estimate is returned
in WORK(1). No error message related to LWORK is
issued by XERBLA. Neither H nor Z are accessed.
INFO
INFO is INTEGER
batim
INFO is INTEGER
= 0: successful exit
> 0: if INFO = i, SLAQR4 failed to compute all of
the eigenvalues. Elements 1:ilo-1 and i+1:n of WR
and WI contain those eigenvalues which have been
successfully computed. (Failures are rare.)
If INFO > 0 and WANT is .FALSE., then on exit,
the remaining unconverged eigenvalues are the eigen-
values of the upper Hessenberg matrix rows and
columns ILO through INFO of the final, output
value of H.
If INFO > 0 and WANTT is .TRUE., then on exit
(*) (initial value of H)*U = U*(final value of H)
where U is a orthogonal matrix. The final
value of H is upper Hessenberg and triangular in
rows and columns INFO+1 through IHI.
If INFO > 0 and WANTZ is .TRUE., then on exit
(final value of Z(ILO:IHI,ILOZ:IHIZ)
= (initial value of Z(ILO:IHI,ILOZ:IHIZ)*U
where U is the orthogonal matrix in (*) (regard-
less of the value of WANTT.)
If INFO > 0 and WANTZ is .FALSE., then Z is not
accessed.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
Karen Braman and Ralph Byers, Department of Mathematics, University of Kansas, USA
References:
K. Braman, R. Byers and R. Mathias, The Multi-Shift QR
Algorithm Part I: Maintaining Well Focused Shifts, and Level 3
Performance, SIAM Journal of Matrix Analysis, volume 23, pages
929--947, 2002.
K. Braman, R. Byers and R. Mathias, The Multi-Shift QR Algorithm Part II: Aggressive
Early Deflation, SIAM Journal of Matrix Analysis, volume 23, pages 948--973, 2002.
subroutine slaqr5 (logical WANTT, logical WANTZ, integer KACC22, integer N, integer KTOP,
integer KBOT, integer NSHFTS, real, dimension( * ) SR, real, dimension( * ) SI, real,
dimension( ldh, * ) H, integer LDH, integer ILOZ, integer IHIZ, real, dimension( ldz, * )
Z, integer LDZ, real, dimension( ldv, * ) V, integer LDV, real, dimension( ldu, * ) U,
integer LDU, integer NV, real, dimension( ldwv, * ) WV, integer LDWV, integer NH, real,
dimension( ldwh, * ) WH, integer LDWH)
SLAQR5 performs a single small-bulge multi-shift QR sweep.
Purpose:
SLAQR5, called by SLAQR0, performs a
single small-bulge multi-shift QR sweep.
Parameters
WANTT
WANTT is LOGICAL
WANTT = .true. if the quasi-triangular Schur factor
is being computed. WANTT is set to .false. otherwise.
WANTZ
WANTZ is LOGICAL
WANTZ = .true. if the orthogonal Schur factor is being
computed. WANTZ is set to .false. otherwise.
KACC22
KACC22 is INTEGER with value 0, 1, or 2.
Specifies the computation mode of far-from-diagonal
orthogonal updates.
= 0: SLAQR5 does not accumulate reflections and does not
use matrix-matrix multiply to update far-from-diagonal
matrix entries.
= 1: SLAQR5 accumulates reflections and uses matrix-matrix
multiply to update the far-from-diagonal matrix entries.
= 2: Same as KACC22 = 1. This option used to enable exploiting
the 2-by-2 structure during matrix multiplications, but
this is no longer supported.
N
N is INTEGER
N is the order of the Hessenberg matrix H upon which this
subroutine operates.
KTOP
KTOP is INTEGER
KBOT
KBOT is INTEGER
These are the first and last rows and columns of an
isolated diagonal block upon which the QR sweep is to be
applied. It is assumed without a check that
either KTOP = 1 or H(KTOP,KTOP-1) = 0
and
either KBOT = N or H(KBOT+1,KBOT) = 0.
NSHFTS
NSHFTS is INTEGER
NSHFTS gives the number of simultaneous shifts. NSHFTS
must be positive and even.
SR
SR is REAL array, dimension (NSHFTS)
SI
SI is REAL array, dimension (NSHFTS)
SR contains the real parts and SI contains the imaginary
parts of the NSHFTS shifts of origin that define the
multi-shift QR sweep. On output SR and SI may be
reordered.
H
H is REAL array, dimension (LDH,N)
On input H contains a Hessenberg matrix. On output a
multi-shift QR sweep with shifts SR(J)+i*SI(J) is applied
to the isolated diagonal block in rows and columns KTOP
through KBOT.
LDH
LDH is INTEGER
LDH is the leading dimension of H just as declared in the
calling procedure. LDH >= MAX(1,N).
ILOZ
ILOZ is INTEGER
IHIZ
IHIZ is INTEGER
Specify the rows of Z to which transformations must be
applied if WANTZ is .TRUE.. 1 <= ILOZ <= IHIZ <= N
Z
Z is REAL array, dimension (LDZ,IHIZ)
If WANTZ = .TRUE., then the QR Sweep orthogonal
similarity transformation is accumulated into
Z(ILOZ:IHIZ,ILOZ:IHIZ) from the right.
If WANTZ = .FALSE., then Z is unreferenced.
LDZ
LDZ is INTEGER
LDA is the leading dimension of Z just as declared in
the calling procedure. LDZ >= N.
V
V is REAL array, dimension (LDV,NSHFTS/2)
LDV
LDV is INTEGER
LDV is the leading dimension of V as declared in the
calling procedure. LDV >= 3.
U
U is REAL array, dimension (LDU,2*NSHFTS)
LDU
LDU is INTEGER
LDU is the leading dimension of U just as declared in the
in the calling subroutine. LDU >= 2*NSHFTS.
NV
NV is INTEGER
NV is the number of rows in WV agailable for workspace.
NV >= 1.
WV
WV is REAL array, dimension (LDWV,2*NSHFTS)
LDWV
LDWV is INTEGER
LDWV is the leading dimension of WV as declared in the
in the calling subroutine. LDWV >= NV.
NH
NH is INTEGER
NH is the number of columns in array WH available for
workspace. NH >= 1.
WH
WH is REAL array, dimension (LDWH,NH)
LDWH
LDWH is INTEGER
Leading dimension of WH just as declared in the
calling procedure. LDWH >= 2*NSHFTS.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
Karen Braman and Ralph Byers, Department of Mathematics, University of Kansas, USA
Lars Karlsson, Daniel Kressner, and Bruno Lang
Thijs Steel, Department of Computer science, KU Leuven, Belgium
References:
K. Braman, R. Byers and R. Mathias, The Multi-Shift QR Algorithm Part I: Maintaining
Well Focused Shifts, and Level 3 Performance, SIAM Journal of Matrix Analysis, volume
23, pages 929--947, 2002.
Lars Karlsson, Daniel Kressner, and Bruno Lang, Optimally packed chains of bulges in
multishift QR algorithms. ACM Trans. Math. Softw. 40, 2, Article 12 (February 2014).
subroutine slaqsb (character UPLO, integer N, integer KD, real, dimension( ldab, * ) AB,
integer LDAB, real, dimension( * ) S, real SCOND, real AMAX, character EQUED)
SLAQSB scales a symmetric/Hermitian band matrix, using scaling factors computed by spbequ.
Purpose:
SLAQSB equilibrates a symmetric band matrix A using the scaling
factors in the vector S.
Parameters
UPLO
UPLO is CHARACTER*1
Specifies whether the upper or lower triangular part of the
symmetric matrix A is stored.
= 'U': Upper triangular
= 'L': Lower triangular
N
N is INTEGER
The order of the matrix A. N >= 0.
KD
KD is INTEGER
The number of super-diagonals of the matrix A if UPLO = 'U',
or the number of sub-diagonals if UPLO = 'L'. KD >= 0.
AB
AB is REAL array, dimension (LDAB,N)
On entry, the upper or lower triangle of the symmetric band
matrix A, stored in the first KD+1 rows of the array. The
j-th column of A is stored in the j-th column of the array AB
as follows:
if UPLO = 'U', AB(kd+1+i-j,j) = A(i,j) for max(1,j-kd)<=i<=j;
if UPLO = 'L', AB(1+i-j,j) = A(i,j) for j<=i<=min(n,j+kd).
On exit, if INFO = 0, the triangular factor U or L from the
Cholesky factorization A = U**T*U or A = L*L**T of the band
matrix A, in the same storage format as A.
LDAB
LDAB is INTEGER
The leading dimension of the array AB. LDAB >= KD+1.
S
S is REAL array, dimension (N)
The scale factors for A.
SCOND
SCOND is REAL
Ratio of the smallest S(i) to the largest S(i).
AMAX
AMAX is REAL
Absolute value of largest matrix entry.
EQUED
EQUED is CHARACTER*1
Specifies whether or not equilibration was done.
= 'N': No equilibration.
= 'Y': Equilibration was done, i.e., A has been replaced by
diag(S) * A * diag(S).
Internal Parameters:
THRESH is a threshold value used to decide if scaling should be done
based on the ratio of the scaling factors. If SCOND < THRESH,
scaling is done.
LARGE and SMALL are threshold values used to decide if scaling should
be done based on the absolute size of the largest matrix element.
If AMAX > LARGE or AMAX < SMALL, scaling is done.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slaqsp (character UPLO, integer N, real, dimension( * ) AP, real, dimension( * ) S,
real SCOND, real AMAX, character EQUED)
SLAQSP scales a symmetric/Hermitian matrix in packed storage, using scaling factors
computed by sppequ.
Purpose:
SLAQSP equilibrates a symmetric matrix A using the scaling factors
in the vector S.
Parameters
UPLO
UPLO is CHARACTER*1
Specifies whether the upper or lower triangular part of the
symmetric matrix A is stored.
= 'U': Upper triangular
= 'L': Lower triangular
N
N is INTEGER
The order of the matrix A. N >= 0.
AP
AP is REAL array, dimension (N*(N+1)/2)
On entry, the upper or lower triangle of the symmetric matrix
A, packed columnwise in a linear array. The j-th column of A
is stored in the array AP as follows:
if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
On exit, the equilibrated matrix: diag(S) * A * diag(S), in
the same storage format as A.
S
S is REAL array, dimension (N)
The scale factors for A.
SCOND
SCOND is REAL
Ratio of the smallest S(i) to the largest S(i).
AMAX
AMAX is REAL
Absolute value of largest matrix entry.
EQUED
EQUED is CHARACTER*1
Specifies whether or not equilibration was done.
= 'N': No equilibration.
= 'Y': Equilibration was done, i.e., A has been replaced by
diag(S) * A * diag(S).
Internal Parameters:
THRESH is a threshold value used to decide if scaling should be done
based on the ratio of the scaling factors. If SCOND < THRESH,
scaling is done.
LARGE and SMALL are threshold values used to decide if scaling should
be done based on the absolute size of the largest matrix element.
If AMAX > LARGE or AMAX < SMALL, scaling is done.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slaqtr (logical LTRAN, logical LREAL, integer N, real, dimension( ldt, * ) T,
integer LDT, real, dimension( * ) B, real W, real SCALE, real, dimension( * ) X, real,
dimension( * ) WORK, integer INFO)
SLAQTR solves a real quasi-triangular system of equations, or a complex quasi-triangular
system of special form, in real arithmetic.
Purpose:
SLAQTR solves the real quasi-triangular system
op(T)*p = scale*c, if LREAL = .TRUE.
or the complex quasi-triangular systems
op(T + iB)*(p+iq) = scale*(c+id), if LREAL = .FALSE.
in real arithmetic, where T is upper quasi-triangular.
If LREAL = .FALSE., then the first diagonal block of T must be
1 by 1, B is the specially structured matrix
B = [ b(1) b(2) ... b(n) ]
[ w ]
[ w ]
[ . ]
[ w ]
op(A) = A or A**T, A**T denotes the transpose of
matrix A.
On input, X = [ c ]. On output, X = [ p ].
[ d ] [ q ]
This subroutine is designed for the condition number estimation
in routine STRSNA.
Parameters
LTRAN
LTRAN is LOGICAL
On entry, LTRAN specifies the option of conjugate transpose:
= .FALSE., op(T+i*B) = T+i*B,
= .TRUE., op(T+i*B) = (T+i*B)**T.
LREAL
LREAL is LOGICAL
On entry, LREAL specifies the input matrix structure:
= .FALSE., the input is complex
= .TRUE., the input is real
N
N is INTEGER
On entry, N specifies the order of T+i*B. N >= 0.
T
T is REAL array, dimension (LDT,N)
On entry, T contains a matrix in Schur canonical form.
If LREAL = .FALSE., then the first diagonal block of T must
be 1 by 1.
LDT
LDT is INTEGER
The leading dimension of the matrix T. LDT >= max(1,N).
B
B is REAL array, dimension (N)
On entry, B contains the elements to form the matrix
B as described above.
If LREAL = .TRUE., B is not referenced.
W
W is REAL
On entry, W is the diagonal element of the matrix B.
If LREAL = .TRUE., W is not referenced.
SCALE
SCALE is REAL
On exit, SCALE is the scale factor.
X
X is REAL array, dimension (2*N)
On entry, X contains the right hand side of the system.
On exit, X is overwritten by the solution.
WORK
WORK is REAL array, dimension (N)
INFO
INFO is INTEGER
On exit, INFO is set to
0: successful exit.
1: the some diagonal 1 by 1 block has been perturbed by
a small number SMIN to keep nonsingularity.
2: the some diagonal 2 by 2 block has been perturbed by
a small number in SLALN2 to keep nonsingularity.
NOTE: In the interests of speed, this routine does not
check the inputs for errors.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slar1v (integer N, integer B1, integer BN, real LAMBDA, real, dimension( * ) D,
real, dimension( * ) L, real, dimension( * ) LD, real, dimension( * ) LLD, real PIVMIN,
real GAPTOL, real, dimension( * ) Z, logical WANTNC, integer NEGCNT, real ZTZ, real
MINGMA, integer R, integer, dimension( * ) ISUPPZ, real NRMINV, real RESID, real RQCORR,
real, dimension( * ) WORK)
SLAR1V computes the (scaled) r-th column of the inverse of the submatrix in rows b1
through bn of the tridiagonal matrix LDLT - λI.
Purpose:
SLAR1V computes the (scaled) r-th column of the inverse of
the sumbmatrix in rows B1 through BN of the tridiagonal matrix
L D L**T - sigma I. When sigma is close to an eigenvalue, the
computed vector is an accurate eigenvector. Usually, r corresponds
to the index where the eigenvector is largest in magnitude.
The following steps accomplish this computation :
(a) Stationary qd transform, L D L**T - sigma I = L(+) D(+) L(+)**T,
(b) Progressive qd transform, L D L**T - sigma I = U(-) D(-) U(-)**T,
(c) Computation of the diagonal elements of the inverse of
L D L**T - sigma I by combining the above transforms, and choosing
r as the index where the diagonal of the inverse is (one of the)
largest in magnitude.
(d) Computation of the (scaled) r-th column of the inverse using the
twisted factorization obtained by combining the top part of the
the stationary and the bottom part of the progressive transform.
Parameters
N
N is INTEGER
The order of the matrix L D L**T.
B1
B1 is INTEGER
First index of the submatrix of L D L**T.
BN
BN is INTEGER
Last index of the submatrix of L D L**T.
LAMBDA
LAMBDA is REAL
The shift. In order to compute an accurate eigenvector,
LAMBDA should be a good approximation to an eigenvalue
of L D L**T.
L
L is REAL array, dimension (N-1)
The (n-1) subdiagonal elements of the unit bidiagonal matrix
L, in elements 1 to N-1.
D
D is REAL array, dimension (N)
The n diagonal elements of the diagonal matrix D.
LD
LD is REAL array, dimension (N-1)
The n-1 elements L(i)*D(i).
LLD
LLD is REAL array, dimension (N-1)
The n-1 elements L(i)*L(i)*D(i).
PIVMIN
PIVMIN is REAL
The minimum pivot in the Sturm sequence.
GAPTOL
GAPTOL is REAL
Tolerance that indicates when eigenvector entries are negligible
w.r.t. their contribution to the residual.
Z
Z is REAL array, dimension (N)
On input, all entries of Z must be set to 0.
On output, Z contains the (scaled) r-th column of the
inverse. The scaling is such that Z(R) equals 1.
WANTNC
WANTNC is LOGICAL
Specifies whether NEGCNT has to be computed.
NEGCNT
NEGCNT is INTEGER
If WANTNC is .TRUE. then NEGCNT = the number of pivots < pivmin
in the matrix factorization L D L**T, and NEGCNT = -1 otherwise.
ZTZ
ZTZ is REAL
The square of the 2-norm of Z.
MINGMA
MINGMA is REAL
The reciprocal of the largest (in magnitude) diagonal
element of the inverse of L D L**T - sigma I.
R
R is INTEGER
The twist index for the twisted factorization used to
compute Z.
On input, 0 <= R <= N. If R is input as 0, R is set to
the index where (L D L**T - sigma I)^{-1} is largest
in magnitude. If 1 <= R <= N, R is unchanged.
On output, R contains the twist index used to compute Z.
Ideally, R designates the position of the maximum entry in the
eigenvector.
ISUPPZ
ISUPPZ is INTEGER array, dimension (2)
The support of the vector in Z, i.e., the vector Z is
nonzero only in elements ISUPPZ(1) through ISUPPZ( 2 ).
NRMINV
NRMINV is REAL
NRMINV = 1/SQRT( ZTZ )
RESID
RESID is REAL
The residual of the FP vector.
RESID = ABS( MINGMA )/SQRT( ZTZ )
RQCORR
RQCORR is REAL
The Rayleigh Quotient correction to LAMBDA.
RQCORR = MINGMA*TMP
WORK
WORK is REAL array, dimension (4*N)
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
Beresford Parlett, University of California, Berkeley, USA
Jim Demmel, University of California, Berkeley, USA
Inderjit Dhillon, University of Texas, Austin, USA
Osni Marques, LBNL/NERSC, USA
Christof Voemel, University of California, Berkeley, USA
subroutine slar2v (integer N, real, dimension( * ) X, real, dimension( * ) Y, real, dimension(
* ) Z, integer INCX, real, dimension( * ) C, real, dimension( * ) S, integer INCC)
SLAR2V applies a vector of plane rotations with real cosines and real sines from both
sides to a sequence of 2-by-2 symmetric/Hermitian matrices.
Purpose:
SLAR2V applies a vector of real plane rotations from both sides to
a sequence of 2-by-2 real symmetric matrices, defined by the elements
of the vectors x, y and z. For i = 1,2,...,n
( x(i) z(i) ) := ( c(i) s(i) ) ( x(i) z(i) ) ( c(i) -s(i) )
( z(i) y(i) ) ( -s(i) c(i) ) ( z(i) y(i) ) ( s(i) c(i) )
Parameters
N
N is INTEGER
The number of plane rotations to be applied.
X
X is REAL array,
dimension (1+(N-1)*INCX)
The vector x.
Y
Y is REAL array,
dimension (1+(N-1)*INCX)
The vector y.
Z
Z is REAL array,
dimension (1+(N-1)*INCX)
The vector z.
INCX
INCX is INTEGER
The increment between elements of X, Y and Z. INCX > 0.
C
C is REAL array, dimension (1+(N-1)*INCC)
The cosines of the plane rotations.
S
S is REAL array, dimension (1+(N-1)*INCC)
The sines of the plane rotations.
INCC
INCC is INTEGER
The increment between elements of C and S. INCC > 0.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slarf (character SIDE, integer M, integer N, real, dimension( * ) V, integer INCV,
real TAU, real, dimension( ldc, * ) C, integer LDC, real, dimension( * ) WORK)
SLARF applies an elementary reflector to a general rectangular matrix.
Purpose:
SLARF applies a real elementary reflector H to a real m by n matrix
C, from either the left or the right. H is represented in the form
H = I - tau * v * v**T
where tau is a real scalar and v is a real vector.
If tau = 0, then H is taken to be the unit matrix.
Parameters
SIDE
SIDE is CHARACTER*1
= 'L': form H * C
= 'R': form C * H
M
M is INTEGER
The number of rows of the matrix C.
N
N is INTEGER
The number of columns of the matrix C.
V
V is REAL array, dimension
(1 + (M-1)*abs(INCV)) if SIDE = 'L'
or (1 + (N-1)*abs(INCV)) if SIDE = 'R'
The vector v in the representation of H. V is not used if
TAU = 0.
INCV
INCV is INTEGER
The increment between elements of v. INCV <> 0.
TAU
TAU is REAL
The value tau in the representation of H.
C
C is REAL array, dimension (LDC,N)
On entry, the m by n matrix C.
On exit, C is overwritten by the matrix H * C if SIDE = 'L',
or C * H if SIDE = 'R'.
LDC
LDC is INTEGER
The leading dimension of the array C. LDC >= max(1,M).
WORK
WORK is REAL array, dimension
(N) if SIDE = 'L'
or (M) if SIDE = 'R'
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slarfb (character SIDE, character TRANS, character DIRECT, character STOREV,
integer M, integer N, integer K, real, dimension( ldv, * ) V, integer LDV, real,
dimension( ldt, * ) T, integer LDT, real, dimension( ldc, * ) C, integer LDC, real,
dimension( ldwork, * ) WORK, integer LDWORK)
SLARFB applies a block reflector or its transpose to a general rectangular matrix.
Purpose:
SLARFB applies a real block reflector H or its transpose H**T to a
real m by n matrix C, from either the left or the right.
Parameters
SIDE
SIDE is CHARACTER*1
= 'L': apply H or H**T from the Left
= 'R': apply H or H**T from the Right
TRANS
TRANS is CHARACTER*1
= 'N': apply H (No transpose)
= 'T': apply H**T (Transpose)
DIRECT
DIRECT is CHARACTER*1
Indicates how H is formed from a product of elementary
reflectors
= 'F': H = H(1) H(2) . . . H(k) (Forward)
= 'B': H = H(k) . . . H(2) H(1) (Backward)
STOREV
STOREV is CHARACTER*1
Indicates how the vectors which define the elementary
reflectors are stored:
= 'C': Columnwise
= 'R': Rowwise
M
M is INTEGER
The number of rows of the matrix C.
N
N is INTEGER
The number of columns of the matrix C.
K
K is INTEGER
The order of the matrix T (= the number of elementary
reflectors whose product defines the block reflector).
If SIDE = 'L', M >= K >= 0;
if SIDE = 'R', N >= K >= 0.
V
V is REAL array, dimension
(LDV,K) if STOREV = 'C'
(LDV,M) if STOREV = 'R' and SIDE = 'L'
(LDV,N) if STOREV = 'R' and SIDE = 'R'
The matrix V. See Further Details.
LDV
LDV is INTEGER
The leading dimension of the array V.
If STOREV = 'C' and SIDE = 'L', LDV >= max(1,M);
if STOREV = 'C' and SIDE = 'R', LDV >= max(1,N);
if STOREV = 'R', LDV >= K.
T
T is REAL array, dimension (LDT,K)
The triangular k by k matrix T in the representation of the
block reflector.
LDT
LDT is INTEGER
The leading dimension of the array T. LDT >= K.
C
C is REAL array, dimension (LDC,N)
On entry, the m by n matrix C.
On exit, C is overwritten by H*C or H**T*C or C*H or C*H**T.
LDC
LDC is INTEGER
The leading dimension of the array C. LDC >= max(1,M).
WORK
WORK is REAL array, dimension (LDWORK,K)
LDWORK
LDWORK is INTEGER
The leading dimension of the array WORK.
If SIDE = 'L', LDWORK >= max(1,N);
if SIDE = 'R', LDWORK >= max(1,M).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
The shape of the matrix V and the storage of the vectors which define
the H(i) is best illustrated by the following example with n = 5 and
k = 3. The elements equal to 1 are not stored; the corresponding
array elements are modified but restored on exit. The rest of the
array is not used.
DIRECT = 'F' and STOREV = 'C': DIRECT = 'F' and STOREV = 'R':
V = ( 1 ) V = ( 1 v1 v1 v1 v1 )
( v1 1 ) ( 1 v2 v2 v2 )
( v1 v2 1 ) ( 1 v3 v3 )
( v1 v2 v3 )
( v1 v2 v3 )
DIRECT = 'B' and STOREV = 'C': DIRECT = 'B' and STOREV = 'R':
V = ( v1 v2 v3 ) V = ( v1 v1 1 )
( v1 v2 v3 ) ( v2 v2 v2 1 )
( 1 v2 v3 ) ( v3 v3 v3 v3 1 )
( 1 v3 )
( 1 )
subroutine slarfg (integer N, real ALPHA, real, dimension( * ) X, integer INCX, real TAU)
SLARFG generates an elementary reflector (Householder matrix).
Purpose:
SLARFG generates a real elementary reflector H of order n, such
that
H * ( alpha ) = ( beta ), H**T * H = I.
( x ) ( 0 )
where alpha and beta are scalars, and x is an (n-1)-element real
vector. H is represented in the form
H = I - tau * ( 1 ) * ( 1 v**T ) ,
( v )
where tau is a real scalar and v is a real (n-1)-element
vector.
If the elements of x are all zero, then tau = 0 and H is taken to be
the unit matrix.
Otherwise 1 <= tau <= 2.
Parameters
N
N is INTEGER
The order of the elementary reflector.
ALPHA
ALPHA is REAL
On entry, the value alpha.
On exit, it is overwritten with the value beta.
X
X is REAL array, dimension
(1+(N-2)*abs(INCX))
On entry, the vector x.
On exit, it is overwritten with the vector v.
INCX
INCX is INTEGER
The increment between elements of X. INCX > 0.
TAU
TAU is REAL
The value tau.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slarfgp (integer N, real ALPHA, real, dimension( * ) X, integer INCX, real TAU)
SLARFGP generates an elementary reflector (Householder matrix) with non-negative beta.
Purpose:
SLARFGP generates a real elementary reflector H of order n, such
that
H * ( alpha ) = ( beta ), H**T * H = I.
( x ) ( 0 )
where alpha and beta are scalars, beta is non-negative, and x is
an (n-1)-element real vector. H is represented in the form
H = I - tau * ( 1 ) * ( 1 v**T ) ,
( v )
where tau is a real scalar and v is a real (n-1)-element
vector.
If the elements of x are all zero, then tau = 0 and H is taken to be
the unit matrix.
Parameters
N
N is INTEGER
The order of the elementary reflector.
ALPHA
ALPHA is REAL
On entry, the value alpha.
On exit, it is overwritten with the value beta.
X
X is REAL array, dimension
(1+(N-2)*abs(INCX))
On entry, the vector x.
On exit, it is overwritten with the vector v.
INCX
INCX is INTEGER
The increment between elements of X. INCX > 0.
TAU
TAU is REAL
The value tau.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slarft (character DIRECT, character STOREV, integer N, integer K, real, dimension(
ldv, * ) V, integer LDV, real, dimension( * ) TAU, real, dimension( ldt, * ) T, integer
LDT)
SLARFT forms the triangular factor T of a block reflector H = I - vtvH
Purpose:
SLARFT forms the triangular factor T of a real block reflector H
of order n, which is defined as a product of k elementary reflectors.
If DIRECT = 'F', H = H(1) H(2) . . . H(k) and T is upper triangular;
If DIRECT = 'B', H = H(k) . . . H(2) H(1) and T is lower triangular.
If STOREV = 'C', the vector which defines the elementary reflector
H(i) is stored in the i-th column of the array V, and
H = I - V * T * V**T
If STOREV = 'R', the vector which defines the elementary reflector
H(i) is stored in the i-th row of the array V, and
H = I - V**T * T * V
Parameters
DIRECT
DIRECT is CHARACTER*1
Specifies the order in which the elementary reflectors are
multiplied to form the block reflector:
= 'F': H = H(1) H(2) . . . H(k) (Forward)
= 'B': H = H(k) . . . H(2) H(1) (Backward)
STOREV
STOREV is CHARACTER*1
Specifies how the vectors which define the elementary
reflectors are stored (see also Further Details):
= 'C': columnwise
= 'R': rowwise
N
N is INTEGER
The order of the block reflector H. N >= 0.
K
K is INTEGER
The order of the triangular factor T (= the number of
elementary reflectors). K >= 1.
V
V is REAL array, dimension
(LDV,K) if STOREV = 'C'
(LDV,N) if STOREV = 'R'
The matrix V. See further details.
LDV
LDV is INTEGER
The leading dimension of the array V.
If STOREV = 'C', LDV >= max(1,N); if STOREV = 'R', LDV >= K.
TAU
TAU is REAL array, dimension (K)
TAU(i) must contain the scalar factor of the elementary
reflector H(i).
T
T is REAL array, dimension (LDT,K)
The k by k triangular factor T of the block reflector.
If DIRECT = 'F', T is upper triangular; if DIRECT = 'B', T is
lower triangular. The rest of the array is not used.
LDT
LDT is INTEGER
The leading dimension of the array T. LDT >= K.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
The shape of the matrix V and the storage of the vectors which define
the H(i) is best illustrated by the following example with n = 5 and
k = 3. The elements equal to 1 are not stored.
DIRECT = 'F' and STOREV = 'C': DIRECT = 'F' and STOREV = 'R':
V = ( 1 ) V = ( 1 v1 v1 v1 v1 )
( v1 1 ) ( 1 v2 v2 v2 )
( v1 v2 1 ) ( 1 v3 v3 )
( v1 v2 v3 )
( v1 v2 v3 )
DIRECT = 'B' and STOREV = 'C': DIRECT = 'B' and STOREV = 'R':
V = ( v1 v2 v3 ) V = ( v1 v1 1 )
( v1 v2 v3 ) ( v2 v2 v2 1 )
( 1 v2 v3 ) ( v3 v3 v3 v3 1 )
( 1 v3 )
( 1 )
subroutine slarfx (character SIDE, integer M, integer N, real, dimension( * ) V, real TAU,
real, dimension( ldc, * ) C, integer LDC, real, dimension( * ) WORK)
SLARFX applies an elementary reflector to a general rectangular matrix, with loop
unrolling when the reflector has order ≤ 10.
Purpose:
SLARFX applies a real elementary reflector H to a real m by n
matrix C, from either the left or the right. H is represented in the
form
H = I - tau * v * v**T
where tau is a real scalar and v is a real vector.
If tau = 0, then H is taken to be the unit matrix
This version uses inline code if H has order < 11.
Parameters
SIDE
SIDE is CHARACTER*1
= 'L': form H * C
= 'R': form C * H
M
M is INTEGER
The number of rows of the matrix C.
N
N is INTEGER
The number of columns of the matrix C.
V
V is REAL array, dimension (M) if SIDE = 'L'
or (N) if SIDE = 'R'
The vector v in the representation of H.
TAU
TAU is REAL
The value tau in the representation of H.
C
C is REAL array, dimension (LDC,N)
On entry, the m by n matrix C.
On exit, C is overwritten by the matrix H * C if SIDE = 'L',
or C * H if SIDE = 'R'.
LDC
LDC is INTEGER
The leading dimension of the array C. LDC >= (1,M).
WORK
WORK is REAL array, dimension
(N) if SIDE = 'L'
or (M) if SIDE = 'R'
WORK is not referenced if H has order < 11.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slarfy (character UPLO, integer N, real, dimension( * ) V, integer INCV, real TAU,
real, dimension( ldc, * ) C, integer LDC, real, dimension( * ) WORK)
SLARFY
Purpose:
SLARFY applies an elementary reflector, or Householder matrix, H,
to an n x n symmetric matrix C, from both the left and the right.
H is represented in the form
H = I - tau * v * v'
where tau is a scalar and v is a vector.
If tau is zero, then H is taken to be the unit matrix.
Parameters
UPLO
UPLO is CHARACTER*1
Specifies whether the upper or lower triangular part of the
symmetric matrix C is stored.
= 'U': Upper triangle
= 'L': Lower triangle
N
N is INTEGER
The number of rows and columns of the matrix C. N >= 0.
V
V is REAL array, dimension
(1 + (N-1)*abs(INCV))
The vector v as described above.
INCV
INCV is INTEGER
The increment between successive elements of v. INCV must
not be zero.
TAU
TAU is REAL
The value tau as described above.
C
C is REAL array, dimension (LDC, N)
On entry, the matrix C.
On exit, C is overwritten by H * C * H'.
LDC
LDC is INTEGER
The leading dimension of the array C. LDC >= max( 1, N ).
WORK
WORK is REAL array, dimension (N)
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slargv (integer N, real, dimension( * ) X, integer INCX, real, dimension( * ) Y,
integer INCY, real, dimension( * ) C, integer INCC)
SLARGV generates a vector of plane rotations with real cosines and real sines.
Purpose:
SLARGV generates a vector of real plane rotations, determined by
elements of the real vectors x and y. For i = 1,2,...,n
( c(i) s(i) ) ( x(i) ) = ( a(i) )
( -s(i) c(i) ) ( y(i) ) = ( 0 )
Parameters
N
N is INTEGER
The number of plane rotations to be generated.
X
X is REAL array,
dimension (1+(N-1)*INCX)
On entry, the vector x.
On exit, x(i) is overwritten by a(i), for i = 1,...,n.
INCX
INCX is INTEGER
The increment between elements of X. INCX > 0.
Y
Y is REAL array,
dimension (1+(N-1)*INCY)
On entry, the vector y.
On exit, the sines of the plane rotations.
INCY
INCY is INTEGER
The increment between elements of Y. INCY > 0.
C
C is REAL array, dimension (1+(N-1)*INCC)
The cosines of the plane rotations.
INCC
INCC is INTEGER
The increment between elements of C. INCC > 0.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slarrv (integer N, real VL, real VU, real, dimension( * ) D, real, dimension( * )
L, real PIVMIN, integer, dimension( * ) ISPLIT, integer M, integer DOL, integer DOU, real
MINRGP, real RTOL1, real RTOL2, real, dimension( * ) W, real, dimension( * ) WERR, real,
dimension( * ) WGAP, integer, dimension( * ) IBLOCK, integer, dimension( * ) INDEXW, real,
dimension( * ) GERS, real, dimension( ldz, * ) Z, integer LDZ, integer, dimension( * )
ISUPPZ, real, dimension( * ) WORK, integer, dimension( * ) IWORK, integer INFO)
SLARRV computes the eigenvectors of the tridiagonal matrix T = L D LT given L, D and the
eigenvalues of L D LT.
Purpose:
SLARRV computes the eigenvectors of the tridiagonal matrix
T = L D L**T given L, D and APPROXIMATIONS to the eigenvalues of L D L**T.
The input eigenvalues should have been computed by SLARRE.
Parameters
N
N is INTEGER
The order of the matrix. N >= 0.
VL
VL is REAL
Lower bound of the interval that contains the desired
eigenvalues. VL < VU. Needed to compute gaps on the left or right
end of the extremal eigenvalues in the desired RANGE.
VU
VU is REAL
Upper bound of the interval that contains the desired
eigenvalues. VL < VU.
Note: VU is currently not used by this implementation of SLARRV, VU is
passed to SLARRV because it could be used compute gaps on the right end
of the extremal eigenvalues. However, with not much initial accuracy in
LAMBDA and VU, the formula can lead to an overestimation of the right gap
and thus to inadequately early RQI 'convergence'. This is currently
prevented this by forcing a small right gap. And so it turns out that VU
is currently not used by this implementation of SLARRV.
D
D is REAL array, dimension (N)
On entry, the N diagonal elements of the diagonal matrix D.
On exit, D may be overwritten.
L
L is REAL array, dimension (N)
On entry, the (N-1) subdiagonal elements of the unit
bidiagonal matrix L are in elements 1 to N-1 of L
(if the matrix is not split.) At the end of each block
is stored the corresponding shift as given by SLARRE.
On exit, L is overwritten.
PIVMIN
PIVMIN is REAL
The minimum pivot allowed in the Sturm sequence.
ISPLIT
ISPLIT is INTEGER array, dimension (N)
The splitting points, at which T breaks up into blocks.
The first block consists of rows/columns 1 to
ISPLIT( 1 ), the second of rows/columns ISPLIT( 1 )+1
through ISPLIT( 2 ), etc.
M
M is INTEGER
The total number of input eigenvalues. 0 <= M <= N.
DOL
DOL is INTEGER
DOU
DOU is INTEGER
If the user wants to compute only selected eigenvectors from all
the eigenvalues supplied, he can specify an index range DOL:DOU.
Or else the setting DOL=1, DOU=M should be applied.
Note that DOL and DOU refer to the order in which the eigenvalues
are stored in W.
If the user wants to compute only selected eigenpairs, then
the columns DOL-1 to DOU+1 of the eigenvector space Z contain the
computed eigenvectors. All other columns of Z are set to zero.
MINRGP
MINRGP is REAL
RTOL1
RTOL1 is REAL
RTOL2
RTOL2 is REAL
Parameters for bisection.
An interval [LEFT,RIGHT] has converged if
RIGHT-LEFT < MAX( RTOL1*GAP, RTOL2*MAX(|LEFT|,|RIGHT|) )
W
W is REAL array, dimension (N)
The first M elements of W contain the APPROXIMATE eigenvalues for
which eigenvectors are to be computed. The eigenvalues
should be grouped by split-off block and ordered from
smallest to largest within the block ( The output array
W from SLARRE is expected here ). Furthermore, they are with
respect to the shift of the corresponding root representation
for their block. On exit, W holds the eigenvalues of the
UNshifted matrix.
WERR
WERR is REAL array, dimension (N)
The first M elements contain the semiwidth of the uncertainty
interval of the corresponding eigenvalue in W
WGAP
WGAP is REAL array, dimension (N)
The separation from the right neighbor eigenvalue in W.
IBLOCK
IBLOCK is INTEGER array, dimension (N)
The indices of the blocks (submatrices) associated with the
corresponding eigenvalues in W; IBLOCK(i)=1 if eigenvalue
W(i) belongs to the first block from the top, =2 if W(i)
belongs to the second block, etc.
INDEXW
INDEXW is INTEGER array, dimension (N)
The indices of the eigenvalues within each block (submatrix);
for example, INDEXW(i)= 10 and IBLOCK(i)=2 imply that the
i-th eigenvalue W(i) is the 10-th eigenvalue in the second block.
GERS
GERS is REAL array, dimension (2*N)
The N Gerschgorin intervals (the i-th Gerschgorin interval
is (GERS(2*i-1), GERS(2*i)). The Gerschgorin intervals should
be computed from the original UNshifted matrix.
Z
Z is REAL array, dimension (LDZ, max(1,M) )
If INFO = 0, the first M columns of Z contain the
orthonormal eigenvectors of the matrix T
corresponding to the input eigenvalues, with the i-th
column of Z holding the eigenvector associated with W(i).
Note: the user must ensure that at least max(1,M) columns are
supplied in the array Z.
LDZ
LDZ is INTEGER
The leading dimension of the array Z. LDZ >= 1, and if
JOBZ = 'V', LDZ >= max(1,N).
ISUPPZ
ISUPPZ is INTEGER array, dimension ( 2*max(1,M) )
The support of the eigenvectors in Z, i.e., the indices
indicating the nonzero elements in Z. The I-th eigenvector
is nonzero only in elements ISUPPZ( 2*I-1 ) through
ISUPPZ( 2*I ).
WORK
WORK is REAL array, dimension (12*N)
IWORK
IWORK is INTEGER array, dimension (7*N)
INFO
INFO is INTEGER
= 0: successful exit
> 0: A problem occurred in SLARRV.
< 0: One of the called subroutines signaled an internal problem.
Needs inspection of the corresponding parameter IINFO
for further information.
=-1: Problem in SLARRB when refining a child's eigenvalues.
=-2: Problem in SLARRF when computing the RRR of a child.
When a child is inside a tight cluster, it can be difficult
to find an RRR. A partial remedy from the user's point of
view is to make the parameter MINRGP smaller and recompile.
However, as the orthogonality of the computed vectors is
proportional to 1/MINRGP, the user should be aware that
he might be trading in precision when he decreases MINRGP.
=-3: Problem in SLARRB when refining a single eigenvalue
after the Rayleigh correction was rejected.
= 5: The Rayleigh Quotient Iteration failed to converge to
full accuracy in MAXITR steps.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Contributors:
Beresford Parlett, University of California, Berkeley, USA
Jim Demmel, University of California, Berkeley, USA
Inderjit Dhillon, University of Texas, Austin, USA
Osni Marques, LBNL/NERSC, USA
Christof Voemel, University of California, Berkeley, USA
subroutine slartv (integer N, real, dimension( * ) X, integer INCX, real, dimension( * ) Y,
integer INCY, real, dimension( * ) C, real, dimension( * ) S, integer INCC)
SLARTV applies a vector of plane rotations with real cosines and real sines to the
elements of a pair of vectors.
Purpose:
SLARTV applies a vector of real plane rotations to elements of the
real vectors x and y. For i = 1,2,...,n
( x(i) ) := ( c(i) s(i) ) ( x(i) )
( y(i) ) ( -s(i) c(i) ) ( y(i) )
Parameters
N
N is INTEGER
The number of plane rotations to be applied.
X
X is REAL array,
dimension (1+(N-1)*INCX)
The vector x.
INCX
INCX is INTEGER
The increment between elements of X. INCX > 0.
Y
Y is REAL array,
dimension (1+(N-1)*INCY)
The vector y.
INCY
INCY is INTEGER
The increment between elements of Y. INCY > 0.
C
C is REAL array, dimension (1+(N-1)*INCC)
The cosines of the plane rotations.
S
S is REAL array, dimension (1+(N-1)*INCC)
The sines of the plane rotations.
INCC
INCC is INTEGER
The increment between elements of C and S. INCC > 0.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slaswp (integer N, real, dimension( lda, * ) A, integer LDA, integer K1, integer
K2, integer, dimension( * ) IPIV, integer INCX)
SLASWP performs a series of row interchanges on a general rectangular matrix.
Purpose:
SLASWP performs a series of row interchanges on the matrix A.
One row interchange is initiated for each of rows K1 through K2 of A.
Parameters
N
N is INTEGER
The number of columns of the matrix A.
A
A is REAL array, dimension (LDA,N)
On entry, the matrix of column dimension N to which the row
interchanges will be applied.
On exit, the permuted matrix.
LDA
LDA is INTEGER
The leading dimension of the array A.
K1
K1 is INTEGER
The first element of IPIV for which a row interchange will
be done.
K2
K2 is INTEGER
(K2-K1+1) is the number of elements of IPIV for which a row
interchange will be done.
IPIV
IPIV is INTEGER array, dimension (K1+(K2-K1)*abs(INCX))
The vector of pivot indices. Only the elements in positions
K1 through K1+(K2-K1)*abs(INCX) of IPIV are accessed.
IPIV(K1+(K-K1)*abs(INCX)) = L implies rows K and L are to be
interchanged.
INCX
INCX is INTEGER
The increment between successive values of IPIV. If INCX
is negative, the pivots are applied in reverse order.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Modified by
R. C. Whaley, Computer Science Dept., Univ. of Tenn., Knoxville, USA
subroutine slatbs (character UPLO, character TRANS, character DIAG, character NORMIN, integer
N, integer KD, real, dimension( ldab, * ) AB, integer LDAB, real, dimension( * ) X, real
SCALE, real, dimension( * ) CNORM, integer INFO)
SLATBS solves a triangular banded system of equations.
Purpose:
SLATBS solves one of the triangular systems
A *x = s*b or A**T*x = s*b
with scaling to prevent overflow, where A is an upper or lower
triangular band matrix. Here A**T denotes the transpose of A, x and b
are n-element vectors, and s is a scaling factor, usually less than
or equal to 1, chosen so that the components of x will be less than
the overflow threshold. If the unscaled problem will not cause
overflow, the Level 2 BLAS routine STBSV is called. If the matrix A
is singular (A(j,j) = 0 for some j), then s is set to 0 and a
non-trivial solution to A*x = 0 is returned.
Parameters
UPLO
UPLO is CHARACTER*1
Specifies whether the matrix A is upper or lower triangular.
= 'U': Upper triangular
= 'L': Lower triangular
TRANS
TRANS is CHARACTER*1
Specifies the operation applied to A.
= 'N': Solve A * x = s*b (No transpose)
= 'T': Solve A**T* x = s*b (Transpose)
= 'C': Solve A**T* x = s*b (Conjugate transpose = Transpose)
DIAG
DIAG is CHARACTER*1
Specifies whether or not the matrix A is unit triangular.
= 'N': Non-unit triangular
= 'U': Unit triangular
NORMIN
NORMIN is CHARACTER*1
Specifies whether CNORM has been set or not.
= 'Y': CNORM contains the column norms on entry
= 'N': CNORM is not set on entry. On exit, the norms will
be computed and stored in CNORM.
N
N is INTEGER
The order of the matrix A. N >= 0.
KD
KD is INTEGER
The number of subdiagonals or superdiagonals in the
triangular matrix A. KD >= 0.
AB
AB is REAL array, dimension (LDAB,N)
The upper or lower triangular band matrix A, stored in the
first KD+1 rows of the array. The j-th column of A is stored
in the j-th column of the array AB as follows:
if UPLO = 'U', AB(kd+1+i-j,j) = A(i,j) for max(1,j-kd)<=i<=j;
if UPLO = 'L', AB(1+i-j,j) = A(i,j) for j<=i<=min(n,j+kd).
LDAB
LDAB is INTEGER
The leading dimension of the array AB. LDAB >= KD+1.
X
X is REAL array, dimension (N)
On entry, the right hand side b of the triangular system.
On exit, X is overwritten by the solution vector x.
SCALE
SCALE is REAL
The scaling factor s for the triangular system
A * x = s*b or A**T* x = s*b.
If SCALE = 0, the matrix A is singular or badly scaled, and
the vector x is an exact or approximate solution to A*x = 0.
CNORM
CNORM is REAL array, dimension (N)
If NORMIN = 'Y', CNORM is an input argument and CNORM(j)
contains the norm of the off-diagonal part of the j-th column
of A. If TRANS = 'N', CNORM(j) must be greater than or equal
to the infinity-norm, and if TRANS = 'T' or 'C', CNORM(j)
must be greater than or equal to the 1-norm.
If NORMIN = 'N', CNORM is an output argument and CNORM(j)
returns the 1-norm of the offdiagonal part of the j-th column
of A.
INFO
INFO is INTEGER
= 0: successful exit
< 0: if INFO = -k, the k-th argument had an illegal value
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
A rough bound on x is computed; if that is less than overflow, STBSV
is called, otherwise, specific code is used which checks for possible
overflow or divide-by-zero at every operation.
A columnwise scheme is used for solving A*x = b. The basic algorithm
if A is lower triangular is
x[1:n] := b[1:n]
for j = 1, ..., n
x(j) := x(j) / A(j,j)
x[j+1:n] := x[j+1:n] - x(j) * A[j+1:n,j]
end
Define bounds on the components of x after j iterations of the loop:
M(j) = bound on x[1:j]
G(j) = bound on x[j+1:n]
Initially, let M(0) = 0 and G(0) = max{x(i), i=1,...,n}.
Then for iteration j+1 we have
M(j+1) <= G(j) / | A(j+1,j+1) |
G(j+1) <= G(j) + M(j+1) * | A[j+2:n,j+1] |
<= G(j) ( 1 + CNORM(j+1) / | A(j+1,j+1) | )
where CNORM(j+1) is greater than or equal to the infinity-norm of
column j+1 of A, not counting the diagonal. Hence
G(j) <= G(0) product ( 1 + CNORM(i) / | A(i,i) | )
1<=i<=j
and
|x(j)| <= ( G(0) / |A(j,j)| ) product ( 1 + CNORM(i) / |A(i,i)| )
1<=i< j
Since |x(j)| <= M(j), we use the Level 2 BLAS routine STBSV if the
reciprocal of the largest M(j), j=1,..,n, is larger than
max(underflow, 1/overflow).
The bound on x(j) is also used to determine when a step in the
columnwise method can be performed without fear of overflow. If
the computed bound is greater than a large constant, x is scaled to
prevent overflow, but if the bound overflows, x is set to 0, x(j) to
1, and scale to 0, and a non-trivial solution to A*x = 0 is found.
Similarly, a row-wise scheme is used to solve A**T*x = b. The basic
algorithm for A upper triangular is
for j = 1, ..., n
x(j) := ( b(j) - A[1:j-1,j]**T * x[1:j-1] ) / A(j,j)
end
We simultaneously compute two bounds
G(j) = bound on ( b(i) - A[1:i-1,i]**T * x[1:i-1] ), 1<=i<=j
M(j) = bound on x(i), 1<=i<=j
The initial values are G(0) = 0, M(0) = max{b(i), i=1,..,n}, and we
add the constraint G(j) >= G(j-1) and M(j) >= M(j-1) for j >= 1.
Then the bound on x(j) is
M(j) <= M(j-1) * ( 1 + CNORM(j) ) / | A(j,j) |
<= M(0) * product ( ( 1 + CNORM(i) ) / |A(i,i)| )
1<=i<=j
and we can safely call STBSV if 1/M(n) and 1/G(n) are both greater
than max(underflow, 1/overflow).
subroutine slatdf (integer IJOB, integer N, real, dimension( ldz, * ) Z, integer LDZ, real,
dimension( * ) RHS, real RDSUM, real RDSCAL, integer, dimension( * ) IPIV, integer,
dimension( * ) JPIV)
SLATDF uses the LU factorization of the n-by-n matrix computed by sgetc2 and computes a
contribution to the reciprocal Dif-estimate.
Purpose:
SLATDF uses the LU factorization of the n-by-n matrix Z computed by
SGETC2 and computes a contribution to the reciprocal Dif-estimate
by solving Z * x = b for x, and choosing the r.h.s. b such that
the norm of x is as large as possible. On entry RHS = b holds the
contribution from earlier solved sub-systems, and on return RHS = x.
The factorization of Z returned by SGETC2 has the form Z = P*L*U*Q,
where P and Q are permutation matrices. L is lower triangular with
unit diagonal elements and U is upper triangular.
Parameters
IJOB
IJOB is INTEGER
IJOB = 2: First compute an approximative null-vector e
of Z using SGECON, e is normalized and solve for
Zx = +-e - f with the sign giving the greater value
of 2-norm(x). About 5 times as expensive as Default.
IJOB .ne. 2: Local look ahead strategy where all entries of
the r.h.s. b is chosen as either +1 or -1 (Default).
N
N is INTEGER
The number of columns of the matrix Z.
Z
Z is REAL array, dimension (LDZ, N)
On entry, the LU part of the factorization of the n-by-n
matrix Z computed by SGETC2: Z = P * L * U * Q
LDZ
LDZ is INTEGER
The leading dimension of the array Z. LDA >= max(1, N).
RHS
RHS is REAL array, dimension N.
On entry, RHS contains contributions from other subsystems.
On exit, RHS contains the solution of the subsystem with
entries according to the value of IJOB (see above).
RDSUM
RDSUM is REAL
On entry, the sum of squares of computed contributions to
the Dif-estimate under computation by STGSYL, where the
scaling factor RDSCAL (see below) has been factored out.
On exit, the corresponding sum of squares updated with the
contributions from the current sub-system.
If TRANS = 'T' RDSUM is not touched.
NOTE: RDSUM only makes sense when STGSY2 is called by STGSYL.
RDSCAL
RDSCAL is REAL
On entry, scaling factor used to prevent overflow in RDSUM.
On exit, RDSCAL is updated w.r.t. the current contributions
in RDSUM.
If TRANS = 'T', RDSCAL is not touched.
NOTE: RDSCAL only makes sense when STGSY2 is called by
STGSYL.
IPIV
IPIV is INTEGER array, dimension (N).
The pivot indices; for 1 <= i <= N, row i of the
matrix has been interchanged with row IPIV(i).
JPIV
JPIV is INTEGER array, dimension (N).
The pivot indices; for 1 <= j <= N, column j of the
matrix has been interchanged with column JPIV(j).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
This routine is a further developed implementation of algorithm BSOLVE in [1] using
complete pivoting in the LU factorization.
Contributors:
Bo Kagstrom and Peter Poromaa, Department of Computing Science, Umea University, S-901
87 Umea, Sweden.
References:
[1] Bo Kagstrom and Lars Westin,
Generalized Schur Methods with Condition Estimators for
Solving the Generalized Sylvester Equation, IEEE Transactions
on Automatic Control, Vol. 34, No. 7, July 1989, pp 745-751.
[2] Peter Poromaa,
On Efficient and Robust Estimators for the Separation
between two Regular Matrix Pairs with Applications in
Condition Estimation. Report IMINF-95.05, Departement of
Computing Science, Umea University, S-901 87 Umea, Sweden, 1995.
subroutine slatps (character UPLO, character TRANS, character DIAG, character NORMIN, integer
N, real, dimension( * ) AP, real, dimension( * ) X, real SCALE, real, dimension( * )
CNORM, integer INFO)
SLATPS solves a triangular system of equations with the matrix held in packed storage.
Purpose:
SLATPS solves one of the triangular systems
A *x = s*b or A**T*x = s*b
with scaling to prevent overflow, where A is an upper or lower
triangular matrix stored in packed form. Here A**T denotes the
transpose of A, x and b are n-element vectors, and s is a scaling
factor, usually less than or equal to 1, chosen so that the
components of x will be less than the overflow threshold. If the
unscaled problem will not cause overflow, the Level 2 BLAS routine
STPSV is called. If the matrix A is singular (A(j,j) = 0 for some j),
then s is set to 0 and a non-trivial solution to A*x = 0 is returned.
Parameters
UPLO
UPLO is CHARACTER*1
Specifies whether the matrix A is upper or lower triangular.
= 'U': Upper triangular
= 'L': Lower triangular
TRANS
TRANS is CHARACTER*1
Specifies the operation applied to A.
= 'N': Solve A * x = s*b (No transpose)
= 'T': Solve A**T* x = s*b (Transpose)
= 'C': Solve A**T* x = s*b (Conjugate transpose = Transpose)
DIAG
DIAG is CHARACTER*1
Specifies whether or not the matrix A is unit triangular.
= 'N': Non-unit triangular
= 'U': Unit triangular
NORMIN
NORMIN is CHARACTER*1
Specifies whether CNORM has been set or not.
= 'Y': CNORM contains the column norms on entry
= 'N': CNORM is not set on entry. On exit, the norms will
be computed and stored in CNORM.
N
N is INTEGER
The order of the matrix A. N >= 0.
AP
AP is REAL array, dimension (N*(N+1)/2)
The upper or lower triangular matrix A, packed columnwise in
a linear array. The j-th column of A is stored in the array
AP as follows:
if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
X
X is REAL array, dimension (N)
On entry, the right hand side b of the triangular system.
On exit, X is overwritten by the solution vector x.
SCALE
SCALE is REAL
The scaling factor s for the triangular system
A * x = s*b or A**T* x = s*b.
If SCALE = 0, the matrix A is singular or badly scaled, and
the vector x is an exact or approximate solution to A*x = 0.
CNORM
CNORM is REAL array, dimension (N)
If NORMIN = 'Y', CNORM is an input argument and CNORM(j)
contains the norm of the off-diagonal part of the j-th column
of A. If TRANS = 'N', CNORM(j) must be greater than or equal
to the infinity-norm, and if TRANS = 'T' or 'C', CNORM(j)
must be greater than or equal to the 1-norm.
If NORMIN = 'N', CNORM is an output argument and CNORM(j)
returns the 1-norm of the offdiagonal part of the j-th column
of A.
INFO
INFO is INTEGER
= 0: successful exit
< 0: if INFO = -k, the k-th argument had an illegal value
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
A rough bound on x is computed; if that is less than overflow, STPSV
is called, otherwise, specific code is used which checks for possible
overflow or divide-by-zero at every operation.
A columnwise scheme is used for solving A*x = b. The basic algorithm
if A is lower triangular is
x[1:n] := b[1:n]
for j = 1, ..., n
x(j) := x(j) / A(j,j)
x[j+1:n] := x[j+1:n] - x(j) * A[j+1:n,j]
end
Define bounds on the components of x after j iterations of the loop:
M(j) = bound on x[1:j]
G(j) = bound on x[j+1:n]
Initially, let M(0) = 0 and G(0) = max{x(i), i=1,...,n}.
Then for iteration j+1 we have
M(j+1) <= G(j) / | A(j+1,j+1) |
G(j+1) <= G(j) + M(j+1) * | A[j+2:n,j+1] |
<= G(j) ( 1 + CNORM(j+1) / | A(j+1,j+1) | )
where CNORM(j+1) is greater than or equal to the infinity-norm of
column j+1 of A, not counting the diagonal. Hence
G(j) <= G(0) product ( 1 + CNORM(i) / | A(i,i) | )
1<=i<=j
and
|x(j)| <= ( G(0) / |A(j,j)| ) product ( 1 + CNORM(i) / |A(i,i)| )
1<=i< j
Since |x(j)| <= M(j), we use the Level 2 BLAS routine STPSV if the
reciprocal of the largest M(j), j=1,..,n, is larger than
max(underflow, 1/overflow).
The bound on x(j) is also used to determine when a step in the
columnwise method can be performed without fear of overflow. If
the computed bound is greater than a large constant, x is scaled to
prevent overflow, but if the bound overflows, x is set to 0, x(j) to
1, and scale to 0, and a non-trivial solution to A*x = 0 is found.
Similarly, a row-wise scheme is used to solve A**T*x = b. The basic
algorithm for A upper triangular is
for j = 1, ..., n
x(j) := ( b(j) - A[1:j-1,j]**T * x[1:j-1] ) / A(j,j)
end
We simultaneously compute two bounds
G(j) = bound on ( b(i) - A[1:i-1,i]**T * x[1:i-1] ), 1<=i<=j
M(j) = bound on x(i), 1<=i<=j
The initial values are G(0) = 0, M(0) = max{b(i), i=1,..,n}, and we
add the constraint G(j) >= G(j-1) and M(j) >= M(j-1) for j >= 1.
Then the bound on x(j) is
M(j) <= M(j-1) * ( 1 + CNORM(j) ) / | A(j,j) |
<= M(0) * product ( ( 1 + CNORM(i) ) / |A(i,i)| )
1<=i<=j
and we can safely call STPSV if 1/M(n) and 1/G(n) are both greater
than max(underflow, 1/overflow).
subroutine slatrs (character UPLO, character TRANS, character DIAG, character NORMIN, integer
N, real, dimension( lda, * ) A, integer LDA, real, dimension( * ) X, real SCALE, real,
dimension( * ) CNORM, integer INFO)
SLATRS solves a triangular system of equations with the scale factor set to prevent
overflow.
Purpose:
SLATRS solves one of the triangular systems
A *x = s*b or A**T*x = s*b
with scaling to prevent overflow. Here A is an upper or lower
triangular matrix, A**T denotes the transpose of A, x and b are
n-element vectors, and s is a scaling factor, usually less than
or equal to 1, chosen so that the components of x will be less than
the overflow threshold. If the unscaled problem will not cause
overflow, the Level 2 BLAS routine STRSV is called. If the matrix A
is singular (A(j,j) = 0 for some j), then s is set to 0 and a
non-trivial solution to A*x = 0 is returned.
Parameters
UPLO
UPLO is CHARACTER*1
Specifies whether the matrix A is upper or lower triangular.
= 'U': Upper triangular
= 'L': Lower triangular
TRANS
TRANS is CHARACTER*1
Specifies the operation applied to A.
= 'N': Solve A * x = s*b (No transpose)
= 'T': Solve A**T* x = s*b (Transpose)
= 'C': Solve A**T* x = s*b (Conjugate transpose = Transpose)
DIAG
DIAG is CHARACTER*1
Specifies whether or not the matrix A is unit triangular.
= 'N': Non-unit triangular
= 'U': Unit triangular
NORMIN
NORMIN is CHARACTER*1
Specifies whether CNORM has been set or not.
= 'Y': CNORM contains the column norms on entry
= 'N': CNORM is not set on entry. On exit, the norms will
be computed and stored in CNORM.
N
N is INTEGER
The order of the matrix A. N >= 0.
A
A is REAL array, dimension (LDA,N)
The triangular matrix A. If UPLO = 'U', the leading n by n
upper triangular part of the array A contains the upper
triangular matrix, and the strictly lower triangular part of
A is not referenced. If UPLO = 'L', the leading n by n lower
triangular part of the array A contains the lower triangular
matrix, and the strictly upper triangular part of A is not
referenced. If DIAG = 'U', the diagonal elements of A are
also not referenced and are assumed to be 1.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max (1,N).
X
X is REAL array, dimension (N)
On entry, the right hand side b of the triangular system.
On exit, X is overwritten by the solution vector x.
SCALE
SCALE is REAL
The scaling factor s for the triangular system
A * x = s*b or A**T* x = s*b.
If SCALE = 0, the matrix A is singular or badly scaled, and
the vector x is an exact or approximate solution to A*x = 0.
CNORM
CNORM is REAL array, dimension (N)
If NORMIN = 'Y', CNORM is an input argument and CNORM(j)
contains the norm of the off-diagonal part of the j-th column
of A. If TRANS = 'N', CNORM(j) must be greater than or equal
to the infinity-norm, and if TRANS = 'T' or 'C', CNORM(j)
must be greater than or equal to the 1-norm.
If NORMIN = 'N', CNORM is an output argument and CNORM(j)
returns the 1-norm of the offdiagonal part of the j-th column
of A.
INFO
INFO is INTEGER
= 0: successful exit
< 0: if INFO = -k, the k-th argument had an illegal value
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
A rough bound on x is computed; if that is less than overflow, STRSV
is called, otherwise, specific code is used which checks for possible
overflow or divide-by-zero at every operation.
A columnwise scheme is used for solving A*x = b. The basic algorithm
if A is lower triangular is
x[1:n] := b[1:n]
for j = 1, ..., n
x(j) := x(j) / A(j,j)
x[j+1:n] := x[j+1:n] - x(j) * A[j+1:n,j]
end
Define bounds on the components of x after j iterations of the loop:
M(j) = bound on x[1:j]
G(j) = bound on x[j+1:n]
Initially, let M(0) = 0 and G(0) = max{x(i), i=1,...,n}.
Then for iteration j+1 we have
M(j+1) <= G(j) / | A(j+1,j+1) |
G(j+1) <= G(j) + M(j+1) * | A[j+2:n,j+1] |
<= G(j) ( 1 + CNORM(j+1) / | A(j+1,j+1) | )
where CNORM(j+1) is greater than or equal to the infinity-norm of
column j+1 of A, not counting the diagonal. Hence
G(j) <= G(0) product ( 1 + CNORM(i) / | A(i,i) | )
1<=i<=j
and
|x(j)| <= ( G(0) / |A(j,j)| ) product ( 1 + CNORM(i) / |A(i,i)| )
1<=i< j
Since |x(j)| <= M(j), we use the Level 2 BLAS routine STRSV if the
reciprocal of the largest M(j), j=1,..,n, is larger than
max(underflow, 1/overflow).
The bound on x(j) is also used to determine when a step in the
columnwise method can be performed without fear of overflow. If
the computed bound is greater than a large constant, x is scaled to
prevent overflow, but if the bound overflows, x is set to 0, x(j) to
1, and scale to 0, and a non-trivial solution to A*x = 0 is found.
Similarly, a row-wise scheme is used to solve A**T*x = b. The basic
algorithm for A upper triangular is
for j = 1, ..., n
x(j) := ( b(j) - A[1:j-1,j]**T * x[1:j-1] ) / A(j,j)
end
We simultaneously compute two bounds
G(j) = bound on ( b(i) - A[1:i-1,i]**T * x[1:i-1] ), 1<=i<=j
M(j) = bound on x(i), 1<=i<=j
The initial values are G(0) = 0, M(0) = max{b(i), i=1,..,n}, and we
add the constraint G(j) >= G(j-1) and M(j) >= M(j-1) for j >= 1.
Then the bound on x(j) is
M(j) <= M(j-1) * ( 1 + CNORM(j) ) / | A(j,j) |
<= M(0) * product ( ( 1 + CNORM(i) ) / |A(i,i)| )
1<=i<=j
and we can safely call STRSV if 1/M(n) and 1/G(n) are both greater
than max(underflow, 1/overflow).
subroutine slauu2 (character UPLO, integer N, real, dimension( lda, * ) A, integer LDA,
integer INFO)
SLAUU2 computes the product UUH or LHL, where U and L are upper or lower triangular
matrices (unblocked algorithm).
Purpose:
SLAUU2 computes the product U * U**T or L**T * L, where the triangular
factor U or L is stored in the upper or lower triangular part of
the array A.
If UPLO = 'U' or 'u' then the upper triangle of the result is stored,
overwriting the factor U in A.
If UPLO = 'L' or 'l' then the lower triangle of the result is stored,
overwriting the factor L in A.
This is the unblocked form of the algorithm, calling Level 2 BLAS.
Parameters
UPLO
UPLO is CHARACTER*1
Specifies whether the triangular factor stored in the array A
is upper or lower triangular:
= 'U': Upper triangular
= 'L': Lower triangular
N
N is INTEGER
The order of the triangular factor U or L. N >= 0.
A
A is REAL array, dimension (LDA,N)
On entry, the triangular factor U or L.
On exit, if UPLO = 'U', the upper triangle of A is
overwritten with the upper triangle of the product U * U**T;
if UPLO = 'L', the lower triangle of A is overwritten with
the lower triangle of the product L**T * L.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,N).
INFO
INFO is INTEGER
= 0: successful exit
< 0: if INFO = -k, the k-th argument had an illegal value
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine slauum (character UPLO, integer N, real, dimension( lda, * ) A, integer LDA,
integer INFO)
SLAUUM computes the product UUH or LHL, where U and L are upper or lower triangular
matrices (blocked algorithm).
Purpose:
SLAUUM computes the product U * U**T or L**T * L, where the triangular
factor U or L is stored in the upper or lower triangular part of
the array A.
If UPLO = 'U' or 'u' then the upper triangle of the result is stored,
overwriting the factor U in A.
If UPLO = 'L' or 'l' then the lower triangle of the result is stored,
overwriting the factor L in A.
This is the blocked form of the algorithm, calling Level 3 BLAS.
Parameters
UPLO
UPLO is CHARACTER*1
Specifies whether the triangular factor stored in the array A
is upper or lower triangular:
= 'U': Upper triangular
= 'L': Lower triangular
N
N is INTEGER
The order of the triangular factor U or L. N >= 0.
A
A is REAL array, dimension (LDA,N)
On entry, the triangular factor U or L.
On exit, if UPLO = 'U', the upper triangle of A is
overwritten with the upper triangle of the product U * U**T;
if UPLO = 'L', the lower triangle of A is overwritten with
the lower triangle of the product L**T * L.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,N).
INFO
INFO is INTEGER
= 0: successful exit
< 0: if INFO = -k, the k-th argument had an illegal value
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine srscl (integer N, real SA, real, dimension( * ) SX, integer INCX)
SRSCL multiplies a vector by the reciprocal of a real scalar.
Purpose:
SRSCL multiplies an n-element real vector x by the real scalar 1/a.
This is done without overflow or underflow as long as
the final result x/a does not overflow or underflow.
Parameters
N
N is INTEGER
The number of components of the vector x.
SA
SA is REAL
The scalar a which is used to divide each component of x.
SA must be >= 0, or the subroutine will divide by zero.
SX
SX is REAL array, dimension
(1+(N-1)*abs(INCX))
The n-element vector x.
INCX
INCX is INTEGER
The increment between successive values of the vector SX.
> 0: SX(1) = X(1) and SX(1+(i-1)*INCX) = x(i), 1< i<= n
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine stprfb (character SIDE, character TRANS, character DIRECT, character STOREV,
integer M, integer N, integer K, integer L, real, dimension( ldv, * ) V, integer LDV,
real, dimension( ldt, * ) T, integer LDT, real, dimension( lda, * ) A, integer LDA, real,
dimension( ldb, * ) B, integer LDB, real, dimension( ldwork, * ) WORK, integer LDWORK)
STPRFB applies a real 'triangular-pentagonal' block reflector to a real matrix, which is
composed of two blocks.
Purpose:
STPRFB applies a real "triangular-pentagonal" block reflector H or its
transpose H**T to a real matrix C, which is composed of two
blocks A and B, either from the left or right.
Parameters
SIDE
SIDE is CHARACTER*1
= 'L': apply H or H**T from the Left
= 'R': apply H or H**T from the Right
TRANS
TRANS is CHARACTER*1
= 'N': apply H (No transpose)
= 'T': apply H**T (Transpose)
DIRECT
DIRECT is CHARACTER*1
Indicates how H is formed from a product of elementary
reflectors
= 'F': H = H(1) H(2) . . . H(k) (Forward)
= 'B': H = H(k) . . . H(2) H(1) (Backward)
STOREV
STOREV is CHARACTER*1
Indicates how the vectors which define the elementary
reflectors are stored:
= 'C': Columns
= 'R': Rows
M
M is INTEGER
The number of rows of the matrix B.
M >= 0.
N
N is INTEGER
The number of columns of the matrix B.
N >= 0.
K
K is INTEGER
The order of the matrix T, i.e. the number of elementary
reflectors whose product defines the block reflector.
K >= 0.
L
L is INTEGER
The order of the trapezoidal part of V.
K >= L >= 0. See Further Details.
V
V is REAL array, dimension
(LDV,K) if STOREV = 'C'
(LDV,M) if STOREV = 'R' and SIDE = 'L'
(LDV,N) if STOREV = 'R' and SIDE = 'R'
The pentagonal matrix V, which contains the elementary reflectors
H(1), H(2), ..., H(K). See Further Details.
LDV
LDV is INTEGER
The leading dimension of the array V.
If STOREV = 'C' and SIDE = 'L', LDV >= max(1,M);
if STOREV = 'C' and SIDE = 'R', LDV >= max(1,N);
if STOREV = 'R', LDV >= K.
T
T is REAL array, dimension (LDT,K)
The triangular K-by-K matrix T in the representation of the
block reflector.
LDT
LDT is INTEGER
The leading dimension of the array T.
LDT >= K.
A
A is REAL array, dimension
(LDA,N) if SIDE = 'L' or (LDA,K) if SIDE = 'R'
On entry, the K-by-N or M-by-K matrix A.
On exit, A is overwritten by the corresponding block of
H*C or H**T*C or C*H or C*H**T. See Further Details.
LDA
LDA is INTEGER
The leading dimension of the array A.
If SIDE = 'L', LDA >= max(1,K);
If SIDE = 'R', LDA >= max(1,M).
B
B is REAL array, dimension (LDB,N)
On entry, the M-by-N matrix B.
On exit, B is overwritten by the corresponding block of
H*C or H**T*C or C*H or C*H**T. See Further Details.
LDB
LDB is INTEGER
The leading dimension of the array B.
LDB >= max(1,M).
WORK
WORK is REAL array, dimension
(LDWORK,N) if SIDE = 'L',
(LDWORK,K) if SIDE = 'R'.
LDWORK
LDWORK is INTEGER
The leading dimension of the array WORK.
If SIDE = 'L', LDWORK >= K;
if SIDE = 'R', LDWORK >= M.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
The matrix C is a composite matrix formed from blocks A and B.
The block B is of size M-by-N; if SIDE = 'R', A is of size M-by-K,
and if SIDE = 'L', A is of size K-by-N.
If SIDE = 'R' and DIRECT = 'F', C = [A B].
If SIDE = 'L' and DIRECT = 'F', C = [A]
[B].
If SIDE = 'R' and DIRECT = 'B', C = [B A].
If SIDE = 'L' and DIRECT = 'B', C = [B]
[A].
The pentagonal matrix V is composed of a rectangular block V1 and a
trapezoidal block V2. The size of the trapezoidal block is determined by
the parameter L, where 0<=L<=K. If L=K, the V2 block of V is triangular;
if L=0, there is no trapezoidal block, thus V = V1 is rectangular.
If DIRECT = 'F' and STOREV = 'C': V = [V1]
[V2]
- V2 is upper trapezoidal (first L rows of K-by-K upper triangular)
If DIRECT = 'F' and STOREV = 'R': V = [V1 V2]
- V2 is lower trapezoidal (first L columns of K-by-K lower triangular)
If DIRECT = 'B' and STOREV = 'C': V = [V2]
[V1]
- V2 is lower trapezoidal (last L rows of K-by-K lower triangular)
If DIRECT = 'B' and STOREV = 'R': V = [V2 V1]
- V2 is upper trapezoidal (last L columns of K-by-K upper triangular)
If STOREV = 'C' and SIDE = 'L', V is M-by-K with V2 L-by-K.
If STOREV = 'C' and SIDE = 'R', V is N-by-K with V2 L-by-K.
If STOREV = 'R' and SIDE = 'L', V is K-by-M with V2 K-by-L.
If STOREV = 'R' and SIDE = 'R', V is K-by-N with V2 K-by-L.
Author
Generated automatically by Doxygen for LAPACK from the source code.