Provided by: erlang-manpages_25.2.3+dfsg-1_all 
NAME
snmpm - Interface functions to the SNMP toolkit manager
DESCRIPTION
The module snmpm contains interface functions to the SNMP manager.
COMMON DATA TYPES
The following data types are used in the functions below:
oid() = [byte()] - The oid() type is used to represent an ASN.1 OBJECT IDENTIFIER
snmp_reply() = {error_status(), error_index(), varbinds()}
error_status() = noError | atom()
error_index() = integer()
varbinds() = [varbind()]
atl_type() = read | write | read_write
target_name() = string() - Is a unique *non-empty* string
vars_and_vals() = [var_and_val()]
var_and_val() = {oid(), value_type(), value()} | {oid(), value()}
value_type() = o ('OBJECT IDENTIFIER') |
i ('INTEGER') |
u ('Unsigned32') |
g ('Unsigned32') |
s ('OCTET SRING') |
b ('BITS') |
ip ('IpAddress') |
op ('Opaque') |
c32 ('Counter32') |
c64 ('Counter64') |
tt ('TimeTicks')
value() = term()
community() = string()
sec_model() = any | v1 | v2c | usm
sec_name() = string()
sec_level() = noAuthNoPriv | authNoPriv | authPriv
See also the data types in snmpa_conf.
EXPORTS
monitor() -> Ref
Types:
Ref = reference()
Monitor the SNMP manager. In case of a crash, the calling (monitoring) process will
get a 'DOWN' message (see the erlang module for more info).
demonitor(Ref) -> void()
Types:
Ref = reference()
Turn off monitoring of the SNMP manager.
notify_started(Timeout) -> Pid
Types:
Timeout = integer()
Pid = pid()
Request a notification (message) when the SNMP manager has started.
The Timeout is the time the request is valid. The value has to be greater then
zero.
The Pid is the process handling the supervision of the SNMP manager start. When the
manager has started a completion message will be sent to the client from this
process: {snmpm_started, Pid}. If the SNMP manager was not started in time, a
timeout message will be sent to the client: {snmpm_start_timeout, Pid}.
A client application that is dependent on the SNMP manager will use this function
in order to be notified of when the manager has started. There are two situations
when this is useful:
* During the start of a system, when a client application could start prior to
the SNMP manager but is dependent upon it, and therefore has to wait for it to
start.
* When the SNMP manager has crashed, the dependent client application has to wait
for the SNMP manager to be restarted before it can reconnect.
The function returns the pid() of a handler process, that does the supervision on
behalf of the client application. Note that the client application is linked to
this handler.
This function is used in conjunction with the monitor function.
cancel_notify_started(Pid) -> void()
Types:
Pid = pid()
Cancel a previous request to be notified of SNMP manager start.
register_user(Id, Module, Data) -> ok | {error, Reason}
register_user(Id, Module, Data, DefaultAgentConfig) -> ok | {error, Reason}
Types:
Id = term()
Module = snmpm_user()
Data = term()
DefaultAgentConfig = [default_agent_config()]
default_agent_config() = {Item, Val}
Item = community | timeout | max_message_size | version | sec_model | sec_name |
sec_level
Val = term()
Reason = term()
snmpm_user() = Module implementing the snmpm_user behaviour
Register the manager entity (=user) responsible for specific agent(s).
Module is the callback module (snmpm_user behaviour) which will be called whenever
something happens (detected agent, incoming reply or incoming trap/notification).
Note that this could have already been done as a consequence of the node config.
(see users.conf).
The argument DefaultAgentConfig is used as default values when this user register
agents.
The type of Val depends on Item:
community = string()
timeout = integer() | snmp_timer()
max_message_size = integer()
version = v1 | v2 | v3
sec_model = any | v1 | v2c | usm
sec_name = string()
sec_level = noAuthNoPriv | authNoPriv | authPriv
register_user_monitor(Id, Module, Data) -> ok | {error, Reason}
register_user_monitor(Id, Module, Data, DefaultAgentConfig) -> ok | {error, Reason}
Types:
Id = term()
Module = snmpm_user()
DefaultAgentConfig = [default_agent_config()]
default_agent_config() = {Item, Val}
Item = community | timeout | max_message_size | version | sec_model | sec_name |
sec_level
Val = term()
Data = term()
Reason = term()
snmpm_user() = Module implementing the snmpm_user behaviour
Register the monitored manager entity (=user) responsible for specific agent(s).
The process performing the registration will be monitored. Which means that if that
process should die, all agents registered by that user process will be
unregistered. All outstanding requests will be canceled.
Module is the callback module (snmpm_user behaviour) which will be called whenever
something happens (detected agent, incoming reply or incoming trap/notification).
Note that this could have already been done as a consequence of the node config.
(see users.conf).
The argument DefaultAgentConfig is used as default values when this user register
agents.
The type of Val depends on Item:
community = string()
timeout = integer() | snmp_timer()
max_message_size = integer()
version = v1 | v2 | v3
sec_model = any | v1 | v2c | usm
sec_name = string()
sec_level = noAuthNoPriv | authNoPriv | authPriv
unregister_user(Id) -> ok | {error, Reason}
Types:
Id = term()
Unregister the user.
which_users() -> Users
Types:
Users = [UserId]
UserId = term()
Get a list of the identities of all registered users.
register_agent(UserId, TargetName, Config) -> ok | {error, Reason}
Types:
UserId = term()
TargetName = target_name()
Config = [agent_config()]
agent_config() = {Item, Val}
Item = engine_id | address | port | community | timeout | max_message_size |
version | sec_model | sec_name | sec_level | tdomain
Val = term()
Reason = term()
Explicitly instruct the manager to handle this agent, with UserId as the
responsible user.
Called to instruct the manager that this agent shall be handled. This function is
used when the user knows in advance which agents the manager shall handle. Note
that there is an alternate way to do the same thing: Add the agent to the manager
config files (see agents.conf).
TargetName is a non-empty string, uniquely identifying the agent.
The type of Val depends on Item:
[mandatory] engine_id = string()
[mandatory] tadress = transportAddress() % Depends on tdomain
[optional] port = inet:port_number()
[optional] tdomain = transportDomain()
[optional] community = string()
[optional] timeout = integer() | snmp_timer()
[optional] max_message_size = integer()
[optional] version = v1 | v2 | v3
[optional] sec_model = any | v1 | v2c | usm
[optional] sec_name = string()
[optional] sec_level = noAuthNoPriv | authNoPriv | authPriv
Note that if no tdomain is given, the default value, transportDomainUdpIpv4, is
used.
Note that if no port is given and if taddress does not contain a port number, the
default value is used.
unregister_agent(UserId, TargetName) -> ok | {error, Reason}
Types:
UserId = term()
TargetName = target_name()
Unregister the agent.
agent_info(TargetName, Item) -> {ok, Val} | {error, Reason}
Types:
TargetName = target_name()
Item = atom()
Reason = term()
Retrieve agent config.
update_agent_info(UserId, TargetName, Info) -> ok | {error, Reason}
update_agent_info(UserId, TargetName, Item, Val) -> ok | {error, Reason}
Types:
UserId = term()
TargetName = target_name()
Info = [{item(), item_value()}]
Item = item()
item() = atom()
Val = item_value()
item_value() = term()
Reason = term()
Update agent config. The function update_agent_info/3 should be used when several
values needs to be updated atomically.
See function register_agent for more info about what kind of items are allowed.
which_agents() -> Agents
which_agents(UserId) -> Agents
Types:
UserId = term()
Agents = [TargetName]
TargetName = target_name()
Get a list of all registered agents or all agents registered by a specific user.
register_usm_user(EngineID, UserName, Conf) -> ok | {error, Reason}
Types:
EngineID = string()
UserName = string()
Conf = [usm_config()]
usm_config() = {Item, Val}
Item = sec_name | auth | auth_key | priv | priv_key
Val = term()
Reason = term()
Explicitly instruct the manager to handle this USM user. Note that there is an
alternate way to do the same thing: Add the usm user to the manager config files
(see usm.conf).
The type of Val depends on Item:
sec_name = string()
auth = usmNoAuthProtocol | usmHMACMD5AuthProtocol | usmHMACSHAAuthProtocol | usmHMAC128SHA224AuthProtocol | usmHMAC192SH256AuthProtocol | usmHMAC256SHA384AuthProtocol | usmHMAC384SHA512AuthProtocol
auth_key = [integer()] (length 16 if auth = usmHMACMD5AuthProtocol,
length 20 if auth = usmHMACSHAAuthProtocol,
length 28 if auth = usmHMAC128SHA224AuthProtocol,
length 32 if auth = usmHMAC192SHA256AuthProtocol,
length 48 if auth = usmHMAC256SHA384AuthProtocol,
length 64 if auth = usmHMAC384SHA512AuthProtocol)
priv = usmNoPrivProtocol | usmDESPrivProtocol | usmAesCfb128Protocol
priv_key = [integer()] (length is 16 if priv = usmDESPrivProtocol | usmAesCfb128Protocol).
unregister_usm_user(EngineID, UserName) -> ok | {error, Reason}
Types:
EngineID = string()
UserName = string()
Reason = term()
Unregister this USM user.
usm_user_info(EngineID, UserName, Item) -> {ok, Val} | {error, Reason}
Types:
EngineID = string()
UsmName = string()
Item = sec_name | auth | auth_key | priv | priv_key
Reason = term()
Retrieve usm user config.
update_usm_user_info(EngineID, UserName, Item, Val) -> ok | {error, Reason}
Types:
EngineID = string()
UsmName = string()
Item = sec_name | auth | auth_key | priv | priv_key
Val = term()
Reason = term()
Update usm user config.
which_usm_users() -> UsmUsers
Types:
UsmUsers = [{EngineID,UserName}]
EngineID = string()
UsmName = string()
Get a list of all registered usm users.
which_usm_users(EngineID) -> UsmUsers
Types:
UsmUsers = [UserName]
UserName = string()
Get a list of all registered usm users with engine-id EngineID.
sync_get2(UserId, TargetName, Oids) -> {ok, SnmpReply, Remaining} | {error, Reason}
sync_get2(UserId, TargetName, Oids, SendOpts) -> {ok, SnmpReply, Remaining} | {error,
Reason}
Types:
UserId = term()
TargetName = target_name()
Oids = [oid()]
SendOpts = send_opts()
send_opts() = [send_opt()]
send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} |
{community, community()} | {sec_model, sec_model()} | {sec_name, string()} |
{sec_level, sec_level()} | {max_message_size, pos_integer()}
SnmpReply = snmp_reply()
Remaining = integer()
Reason = {send_failed, ReqId, ActualReason} | {invalid_sec_info, SecInfo,
SnmpInfo} | term()
ReqId = term()
ActualReason = term()
SecInfo = [sec_info()]
sec_info() = {sec_tag(), ExpectedValue, ReceivedValue}
sec_tag() = atom()
ExpectedValue = ReceivedValue = term()
SnmpInfo = term()
Synchronous get-request.
Remaining is the remaining time of the given (or default) timeout time.
When Reason is {send_failed, ...} it means that the net_if process failed to send
the message. This could happen because of any number of reasons, i.e. encoding
error. ActualReason is the actual reason in this case.
The send option extra specifies an opaque data structure passed on to the net-if
process. The net-if process included in this application makes, with one exception,
no use of this info, so the only use for it in such a option (when using the built
in net-if) would be tracing. The one usage exception is: Any tuple with
snmpm_extra_info_tag as its first element is reserved for internal use.
Some of the send options (community, sec_model, sec_name, sec_level and
max_message_size) are override options. That is, for this request, they override
any configuration done when the agent was registered.
For SnmpInfo, see the user callback function handle_report.
async_get2(UserId, TargetName, Oids) -> {ok, ReqId} | {error, Reason}
async_get2(UserId, TargetName, Oids, SendOpts) -> {ok, ReqId} | {error, Reason}
Types:
UserId = term()
TargetName = target_name()
Oids = [oid()]
SendOpts = send_opts()
send_opts() = [send_opt()]
send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} |
{community, community()} | {sec_model, sec_model()} | {sec_name, string()} |
{sec_level, sec_level()} | {max_message_size, pos_integer()}
ReqId = term()
Reason = term()
Asynchronous get-request.
The reply, if it arrives, will be delivered to the user through a call to the
snmpm_user callback function handle_pdu.
The send option timeout specifies for how long the request is valid (after which
the manager is free to delete it).
The send option extra specifies an opaque data structure passed on to the net-if
process. The net-if process included in this application makes, with one exception,
no use of this info, so the only use for it in such a option (when using the built
in net-if) would be tracing. The one usage exception is: Any tuple with
snmpm_extra_info_tag as its first element is reserved for internal use.
Some of the send options (community, sec_model, sec_name, sec_level and
max_message_size) are override options. That is, for this request, they override
any configuration done when the agent was registered.
sync_get_next2(UserId, TargetName, Oids) -> {ok, SnmpReply, Remaining} | {error, Reason}
sync_get_next2(UserId, TargetName, Oids, SendOpts) -> {ok, SnmpReply, Remaining} | {error,
Reason}
Types:
UserId = term()
TargetName = target_name()
Oids = [oid()]
SendOpts = send_opts()
send_opts() = [send_opt()]
send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} |
{community, community()} | {sec_model, sec_model()} | {sec_name, string()} |
{sec_level, sec_level()} | {max_message_size, pos_integer()}
SnmpReply = snmp_reply()
Remaining = integer()
Reason = {send_failed, ReqId, ActualReason} | {invalid_sec_info, SecInfo,
SnmpInfo} | term()
ReqId = term()
ActualReason = term()
SecInfo = [sec_info()]
sec_info() = {sec_tag(), ExpectedValue, ReceivedValue}
sec_tag() = atom()
ExpectedValue = ReceivedValue = term()
SnmpInfo = term()
Synchronous get-next-request.
Remaining is the remaining time of the given (or default) timeout time.
When Reason is {send_failed, ...} it means that the net_if process failed to send
the message. This could happen because of any number of reasons, i.e. encoding
error. ActualReason is the actual reason in this case.
The send option extra specifies an opaque data structure passed on to the net-if
process. The net-if process included in this application makes, with one exception,
no use of this info, so the only use for it in such a option (when using the built
in net-if) would be tracing. The one usage exception is: Any tuple with
snmpm_extra_info_tag as its first element is reserved for internal use.
Some of the send options (community, sec_model, sec_name, sec_level and
max_message_size) are override options. That is, for this request, they override
any configuration done when the agent was registered.
For SnmpInfo, see the user callback function handle_report.
async_get_next2(UserId, TargetName, Oids) -> {ok, ReqId} | {error, Reason}
async_get_next2(UserId, TargetName, Oids, SendOpts) -> {ok, ReqId} | {error, Reason}
Types:
UserId = term()
TargetName = target_name()
Oids = [oid()]
send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} |
{community, community()} | {sec_model, sec_model()} | {sec_name, string()} |
{sec_level, sec_level()} | {max_message_size, pos_integer()}
ReqId = integer()
Reason = term()
Asynchronous get-next-request.
The reply will be delivered to the user through a call to the snmpm_user callback
function handle_pdu.
The send option timeout specifies for how long the request is valid (after which
the manager is free to delete it).
The send option extra specifies an opaque data structure passed on to the net-if
process. The net-if process included in this application makes, with one exception,
no use of this info, so the only use for it in such a option (when using the built
in net-if) would be tracing. The one usage exception is: Any tuple with
snmpm_extra_info_tag as its first element is reserved for internal use.
Some of the send options (community, sec_model, sec_name, sec_level and
max_message_size) are override options. That is, for this request, they override
any configuration done when the agent was registered.
sync_set2(UserId, TargetName, VarsAndVals) -> {ok, SnmpReply, Remaining} | {error, Reason}
sync_set2(UserId, TargetName, VarsAndVals, SendOpts) -> {ok, SnmpReply, Remaining} |
{error, Reason}
Types:
UserId = term()
TargetName = target_name()
VarsAndVals = vars_and_vals()
SendOpts = send_opts()
send_opts() = [send_opt()]
send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} |
{community, community()} | {sec_model, sec_model()} | {sec_name, string()} |
{sec_level, sec_level()} | {max_message_size, pos_integer()}
SnmpReply = snmp_reply()
Remaining = integer()
Reason = {send_failed, ReqId, ActualReason} | {invalid_sec_info, SecInfo,
SnmpInfo} | term()
ReqId = term()
ActualReason = term()
SecInfo = [sec_info()]
sec_info() = {sec_tag(), ExpectedValue, ReceivedValue}
sec_tag() = atom()
ExpectedValue = ReceivedValue = term()
SnmpInfo = term()
Synchronous set-request.
Remaining is the remaining time of the given (or default) timeout time.
When Reason is {send_failed, ...} it means that the net_if process failed to send
the message. This could happen because of any number of reasons, i.e. encoding
error. ActualReason is the actual reason in this case.
When var_and_val() is {oid(), value()}, the manager makes an educated guess based
on the loaded mibs.
The send option extra specifies an opaque data structure passed on to the net-if
process. The net-if process included in this application makes, with one exception,
no use of this info, so the only use for it in such a option (when using the built
in net-if) would be tracing. The one usage exception is: Any tuple with
snmpm_extra_info_tag as its first element is reserved for internal use.
Some of the send options (community, sec_model, sec_name, sec_level and
max_message_size) are override options. That is, for this request, they override
any configuration done when the agent was registered.
For SnmpInfo, see the user callback function handle_report.
async_set2(UserId, TargetName, VarsAndVals) -> {ok, ReqId} | {error, Reason}
async_set2(UserId, TargetName, VarsAndVals, SendOpts) -> {ok, ReqId} | {error, Reason}
Types:
UserId = term()
TargetName = target_name()
VarsAndVals = vars_and_vals()
SendOpts = send_opts()
send_opts() = [send_opt()]
send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} |
{community, community()} | {sec_model, sec_model()} | {sec_name, string()} |
{sec_level, sec_level()} | {max_message_size, pos_integer()}
ReqId = term()
Reason = term()
Asynchronous set-request.
The reply will be delivered to the user through a call to the snmpm_user callback
function handle_pdu.
The send option timeout specifies for how long the request is valid (after which
the manager is free to delete it).
When var_and_val() is {oid(), value()}, the manager makes an educated guess based
on the loaded mibs.
The send option extra specifies an opaque data structure passed on to the net-if
process. The net-if process included in this application makes, with one exception,
no use of this info, so the only use for it in such a option (when using the built
in net-if) would be tracing. The one usage exception is: Any tuple with
snmpm_extra_info_tag as its first element is reserved for internal use.
Some of the send options (community, sec_model, sec_name, sec_level and
max_message_size) are override options. That is, for this request, they override
any configuration done when the agent was registered.
sync_get_bulk2(UserId, TragetName, NonRep, MaxRep, Oids) -> {ok, SnmpReply, Remaining} |
{error, Reason}
sync_get_bulk2(UserId, TragetName, NonRep, MaxRep, Oids, SendOpts) -> {ok, SnmpReply,
Remaining} | {error, Reason}
Types:
UserId = term()
TargetName = target_name()
NonRep = integer()
MaxRep = integer()
Oids = [oid()]
SendOpts = send_opts()
send_opts() = [send_opt()]
send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} |
{community, community()} | {sec_model, sec_model()} | {sec_name, string()} |
{sec_level, sec_level()} | {max_message_size, pos_integer()}
SnmpReply = snmp_reply()
Remaining = integer()
Reason = {send_failed, ReqId, ActualReason} | {invalid_sec_info, SecInfo,
SnmpInfo} | term()
ReqId = term()
ActualReason = term()
SecInfo = [sec_info()]
sec_info() = {sec_tag(), ExpectedValue, ReceivedValue}
sec_tag() = atom()
ExpectedValue = ReceivedValue = term()
SnmpInfo = term()
Synchronous get-bulk-request (See RFC1905).
Remaining is the remaining time of the given (or default) timeout time.
When Reason is {send_failed, ...} it means that the net_if process failed to send
the message. This could happen because of any number of reasons, i.e. encoding
error. ActualReason is the actual reason in this case.
The send option extra specifies an opaque data structure passed on to the net-if
process. The net-if process included in this application makes, with one exception,
no use of this info, so the only use for it in such a option (when using the built
in net-if) would be tracing. The one usage exception is: Any tuple with
snmpm_extra_info_tag as its first element is reserved for internal use.
Some of the send options (community, sec_model, sec_name, sec_level and
max_message_size) are override options. That is, for this request, they override
any configuration done when the agent was registered.
For SnmpInfo, see the user callback function handle_report.
async_get_bulk2(UserId, TargetName, NonRep, MaxRep, Oids) -> {ok, ReqId} | {error, Reason}
async_get_bulk2(UserId, TargetName, NonRep, MaxRep, Oids, SendOpts) -> {ok, ReqId} |
{error, Reason}
Types:
UserId = term()
TargetName = target_name()
NonRep = integer()
MaxRep = integer()
Oids = [oid()]
SendOpts = send_opts()
send_opts() = [send_opt()]
send_opt() = {context, string()} | {timeout, pos_integer()} | {extra, term()} |
{community, community()} | {sec_model, sec_model()} | {sec_name, string()} |
{sec_level, sec_level()} | {max_message_size, pos_integer()}
ReqId = integer()
Reason = term()
Asynchronous get-bulk-request (See RFC1905).
The reply will be delivered to the user through a call to the snmpm_user callback
function handle_pdu.
The send option timeout specifies for how long the request is valid (after which
the manager is free to delete it).
The send option extra specifies an opaque data structure passed on to the net-if
process. The net-if process included in this application makes no use of this info,
so the only use for it in such a configuration (when using the built in net-if)
would be tracing.
Some of the send options (community, sec_model, sec_name, sec_level and
max_message_size) are override options. That is, for this request, they override
any configuration done when the agent was registered.
cancel_async_request(UserId, ReqId) -> ok | {error, Reason}
Types:
UserId = term()
ReqId = term()
Reason = term()
Cancel a previous asynchronous request.
log_to_txt(LogDir)
log_to_txt(LogDir, Block | Mibs)
log_to_txt(LogDir, Mibs, Block | OutFile) -> ok | {ok, Cnt} | {error, Reason}
log_to_txt(LogDir, Mibs, OutFile, Block | LogName) -> ok | {ok, Cnt} | {error, Reason}
log_to_txt(LogDir, Mibs, OutFile, LogName, Block | LogFile) -> ok | {ok, Cnt} | {error,
Reason}
log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Block | Start) -> ok | {ok, Cnt} |
{error, Reason}
log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Block, Start) -> ok | {ok, Cnt} |
{error, Reason}
log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Start, Stop) -> ok | {ok, Cnt} |
{error, Reason}
log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Block, Start, Stop) -> ok | {ok, Cnt}
| {error, Reason}
Types:
LogDir = string()
Mibs = [MibName]
MibName = string()
Block = boolean()
OutFile = string()
LogName = string()
LogFile = string()
Start = Stop = null | calendar:datetime() | {local_time, calendar:datetime()} |
{universal_time, calendar:datetime()}
Cnt = {NumOK, NumERR}
NumOK = non_neg_integer()
NumERR = pos_integer()
Reason = disk_log_open_error() | file_open_error() | term()
disk_log_open_error() = {LogName, term()}
file_open_error() = {OutFile, term()}
Converts an Audit Trail Log to a readable text file. OutFile defaults to
"./snmpm_log.txt". LogName defaults to "snmpm_log". LogFile defaults to
"snmpm.log".
The Block argument indicates if the log should be blocked during conversion. This
could be useful when converting large logs (when otherwise the log could wrap
during conversion). Defaults to true.
See snmp:log_to_txt for more info.
log_to_io(LogDir) -> ok | {ok, Cnt} | {error, Reason}
log_to_io(LogDir, Block | Mibs) -> ok | {ok, Cnt} | {error, Reason}
log_to_io(LogDir, Mibs) -> ok | {error, Reason}
log_to_io(LogDir, Mibs, Block | LogName) -> ok | {ok, Cnt} | {error, Reason}
log_to_io(LogDir, Mibs, LogName, Block | LogFile) -> ok | {ok, Cnt} | {error, Reason}
log_to_io(LogDir, Mibs, LogName, LogFile, Block | Start) -> ok | {ok, Cnt} | {error,
Reason}
log_to_io(LogDir, Mibs, LogName, LogFile, Block, Start) -> ok | {ok, Cnt} | {error,
Reason}
log_to_io(LogDir, Mibs, LogName, LogFile, Start, Stop) -> ok | {ok, Cnt} | {error, Reason}
log_to_io(LogDir, Mibs, LogName, LogFile, Block, Start, Stop) -> ok | {ok, Cnt} | {error,
Reason}
Types:
LogDir = string()
Mibs = [MibName]
MibName = string()
Block = boolean()
LogName = string()
LogFile = string()
Start = Stop = null | calendar:datetime() | {local_time, calendar:datetime()} |
{universal_time, calendar:datetime()}
Cnt = {NumOK, NumERR}
NumOK = non_neg_integer()
NumERR = pos_integer()
Reason = disk_log_open_error() | file_open_error() | term()
disk_log_open_error() = {LogName, term()}
file_open_error() = {OutFile, term()}
Converts an Audit Trail Log to a readable format and prints it on stdio. LogName
defaults to "snmpm_log". LogFile defaults to "snmpm.log".
The Block argument indicates if the log should be blocked during conversion. This
could be useful when converting large logs (when otherwise the log could wrap
during conversion). Defaults to true.
See snmp:log_to_io for more info.
change_log_size(NewSize) -> ok | {error, Reason}
Types:
NewSize = {MaxBytes, MaxFiles}
MaxBytes = integer()
MaxFiles = integer()
Reason = term()
Changes the log size of the Audit Trail Log. The application must be configured to
use the audit trail log function. Please refer to disk_log(3erl) in Kernel
Reference Manual for a description of how to change the log size.
The change is permanent, as long as the log is not deleted. That means, the log
size is remembered across reboots.
set_log_type(NewType) -> {ok, OldType} | {error, Reason}
Types:
NewType = OldType = atl_type()
Reason = term()
Changes the run-time Audit Trail log type.
Note that this has no effect on the application configuration as defined by
configuration files, so a node restart will revert the config to whatever is in
those files.
This function is primarily useful in testing/debugging scenarios.
load_mib(Mib) -> ok | {error, Reason}
Types:
Mib = MibName
MibName = string()
Reason = term()
Load a Mib into the manager. The MibName is the name of the Mib, including the path
to where the compiled mib is found. For example,
Dir = code:priv_dir(my_app) ++ "/mibs/",
snmpm:load_mib(Dir ++ "MY-MIB").
unload_mib(Mib) -> ok | {error, Reason}
Types:
Mib = MibName
MibName = string()
Reason = term()
Unload a Mib from the manager. The MibName is the name of the Mib, including the
path to where the compiled mib is found. For example,
Dir = code:priv_dir(my_app) ++ "/mibs/",
snmpm:unload_mib(Dir ++ "MY-MIB").
which_mibs() -> Mibs
Types:
Mibs = [{MibName, MibFile}]
MibName = atom()
MibFile = string()
Get a list of all the mib's loaded into the manager.
name_to_oid(Name) -> {ok, Oids} | {error, Reason}
Types:
Name = atom()
Oids = [oid()]
Transform a alias-name to its oid.
Note that an alias-name is only unique within the mib, so when loading several
mib's into a manager, there might be several instances of the same aliasname.
oid_to_name(Oid) -> {ok, Name} | {error, Reason}
Types:
Oid = oid()
Name = atom()
Reason = term()
Transform a oid to its aliasname.
oid_to_type(Oid) -> {ok, Type} | {error, Reason}
Types:
Oid = oid()
Type = atom()
Reason = term()
Retrieve the type (asn1 bertype) of an oid.
backup(BackupDir) -> ok | {error, Reason}
Types:
BackupDir = string()
Backup persistent data handled by the manager.
BackupDir cannot be identical to DbDir.
info() -> [{Key, Value}]
Types:
Key = atom()
Value = term()
Returns a list (a dictionary) containing information about the manager. Information
includes statistics counters, miscellaneous info about each process (e.g. memory
allocation), and so on.
verbosity(Ref, Verbosity) -> void()
Types:
Ref = server | config | net_if | note_store | all
Verbosity = verbosity()
verbosity() = silence | info | log | debug | trace
Sets verbosity for the designated process. For the lowest verbosity silence,
nothing is printed. The higher the verbosity, the more is printed.
restart(Ref) -> void()
Types:
Ref = net_if
Restart the indicated process (Ref). Note that its not without risk to restart a
process, and should therefore be used with care.
format_reason(Reason) -> string()
format_reason(Prefix, Reason) -> string()
Types:
Reason = term()
Prefix = integer() | string()
This utility function is used to create a formatted (pretty printable) string of
the error reason received from either:
* The Reason returned value if any of the sync/async get/get-next/set/get-bulk
functions returns {error, Reason}
* The Reason parameter in the handle_error user callback function.
Prefix should either be an indentation string (e.g. a list of spaces) or a positive
integer (which will be used to create the indentation string of that length).