Provided by: liblapack-doc_3.11.0-2_all 
NAME
complex16_blas_level3 - complex16
SYNOPSIS
Functions
subroutine zgemm (TRANSA, TRANSB, M, N, K, ALPHA, A, LDA, B, LDB, BETA, C, LDC)
ZGEMM
subroutine zhemm (SIDE, UPLO, M, N, ALPHA, A, LDA, B, LDB, BETA, C, LDC)
ZHEMM
subroutine zher2k (UPLO, TRANS, N, K, ALPHA, A, LDA, B, LDB, BETA, C, LDC)
ZHER2K
subroutine zherk (UPLO, TRANS, N, K, ALPHA, A, LDA, BETA, C, LDC)
ZHERK
subroutine zsymm (SIDE, UPLO, M, N, ALPHA, A, LDA, B, LDB, BETA, C, LDC)
ZSYMM
subroutine zsyr2k (UPLO, TRANS, N, K, ALPHA, A, LDA, B, LDB, BETA, C, LDC)
ZSYR2K
subroutine zsyrk (UPLO, TRANS, N, K, ALPHA, A, LDA, BETA, C, LDC)
ZSYRK
subroutine ztrmm (SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B, LDB)
ZTRMM
subroutine ztrsm (SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA, A, LDA, B, LDB)
ZTRSM
Detailed Description
This is the group of complex16 LEVEL 3 BLAS routines.
Function Documentation
subroutine zgemm (character TRANSA, character TRANSB, integer M, integer N, integer K,
complex*16 ALPHA, complex*16, dimension(lda,*) A, integer LDA, complex*16,
dimension(ldb,*) B, integer LDB, complex*16 BETA, complex*16, dimension(ldc,*) C, integer
LDC)
ZGEMM
Purpose:
ZGEMM performs one of the matrix-matrix operations
C := alpha*op( A )*op( B ) + beta*C,
where op( X ) is one of
op( X ) = X or op( X ) = X**T or op( X ) = X**H,
alpha and beta are scalars, and A, B and C are matrices, with op( A )
an m by k matrix, op( B ) a k by n matrix and C an m by n matrix.
Parameters
TRANSA
TRANSA is CHARACTER*1
On entry, TRANSA specifies the form of op( A ) to be used in
the matrix multiplication as follows:
TRANSA = 'N' or 'n', op( A ) = A.
TRANSA = 'T' or 't', op( A ) = A**T.
TRANSA = 'C' or 'c', op( A ) = A**H.
TRANSB
TRANSB is CHARACTER*1
On entry, TRANSB specifies the form of op( B ) to be used in
the matrix multiplication as follows:
TRANSB = 'N' or 'n', op( B ) = B.
TRANSB = 'T' or 't', op( B ) = B**T.
TRANSB = 'C' or 'c', op( B ) = B**H.
M
M is INTEGER
On entry, M specifies the number of rows of the matrix
op( A ) and of the matrix C. M must be at least zero.
N
N is INTEGER
On entry, N specifies the number of columns of the matrix
op( B ) and the number of columns of the matrix C. N must be
at least zero.
K
K is INTEGER
On entry, K specifies the number of columns of the matrix
op( A ) and the number of rows of the matrix op( B ). K must
be at least zero.
ALPHA
ALPHA is COMPLEX*16
On entry, ALPHA specifies the scalar alpha.
A
A is COMPLEX*16 array, dimension ( LDA, ka ), where ka is
k when TRANSA = 'N' or 'n', and is m otherwise.
Before entry with TRANSA = 'N' or 'n', the leading m by k
part of the array A must contain the matrix A, otherwise
the leading k by m part of the array A must contain the
matrix A.
LDA
LDA is INTEGER
On entry, LDA specifies the first dimension of A as declared
in the calling (sub) program. When TRANSA = 'N' or 'n' then
LDA must be at least max( 1, m ), otherwise LDA must be at
least max( 1, k ).
B
B is COMPLEX*16 array, dimension ( LDB, kb ), where kb is
n when TRANSB = 'N' or 'n', and is k otherwise.
Before entry with TRANSB = 'N' or 'n', the leading k by n
part of the array B must contain the matrix B, otherwise
the leading n by k part of the array B must contain the
matrix B.
LDB
LDB is INTEGER
On entry, LDB specifies the first dimension of B as declared
in the calling (sub) program. When TRANSB = 'N' or 'n' then
LDB must be at least max( 1, k ), otherwise LDB must be at
least max( 1, n ).
BETA
BETA is COMPLEX*16
On entry, BETA specifies the scalar beta. When BETA is
supplied as zero then C need not be set on input.
C
C is COMPLEX*16 array, dimension ( LDC, N )
Before entry, the leading m by n part of the array C must
contain the matrix C, except when beta is zero, in which
case C need not be set on entry.
On exit, the array C is overwritten by the m by n matrix
( alpha*op( A )*op( B ) + beta*C ).
LDC
LDC is INTEGER
On entry, LDC specifies the first dimension of C as declared
in the calling (sub) program. LDC must be at least
max( 1, m ).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Level 3 Blas routine.
-- Written on 8-February-1989.
Jack Dongarra, Argonne National Laboratory.
Iain Duff, AERE Harwell.
Jeremy Du Croz, Numerical Algorithms Group Ltd.
Sven Hammarling, Numerical Algorithms Group Ltd.
subroutine zhemm (character SIDE, character UPLO, integer M, integer N, complex*16 ALPHA,
complex*16, dimension(lda,*) A, integer LDA, complex*16, dimension(ldb,*) B, integer LDB,
complex*16 BETA, complex*16, dimension(ldc,*) C, integer LDC)
ZHEMM
Purpose:
ZHEMM performs one of the matrix-matrix operations
C := alpha*A*B + beta*C,
or
C := alpha*B*A + beta*C,
where alpha and beta are scalars, A is an hermitian matrix and B and
C are m by n matrices.
Parameters
SIDE
SIDE is CHARACTER*1
On entry, SIDE specifies whether the hermitian matrix A
appears on the left or right in the operation as follows:
SIDE = 'L' or 'l' C := alpha*A*B + beta*C,
SIDE = 'R' or 'r' C := alpha*B*A + beta*C,
UPLO
UPLO is CHARACTER*1
On entry, UPLO specifies whether the upper or lower
triangular part of the hermitian matrix A is to be
referenced as follows:
UPLO = 'U' or 'u' Only the upper triangular part of the
hermitian matrix is to be referenced.
UPLO = 'L' or 'l' Only the lower triangular part of the
hermitian matrix is to be referenced.
M
M is INTEGER
On entry, M specifies the number of rows of the matrix C.
M must be at least zero.
N
N is INTEGER
On entry, N specifies the number of columns of the matrix C.
N must be at least zero.
ALPHA
ALPHA is COMPLEX*16
On entry, ALPHA specifies the scalar alpha.
A
A is COMPLEX*16 array, dimension ( LDA, ka ), where ka is
m when SIDE = 'L' or 'l' and is n otherwise.
Before entry with SIDE = 'L' or 'l', the m by m part of
the array A must contain the hermitian matrix, such that
when UPLO = 'U' or 'u', the leading m by m upper triangular
part of the array A must contain the upper triangular part
of the hermitian matrix and the strictly lower triangular
part of A is not referenced, and when UPLO = 'L' or 'l',
the leading m by m lower triangular part of the array A
must contain the lower triangular part of the hermitian
matrix and the strictly upper triangular part of A is not
referenced.
Before entry with SIDE = 'R' or 'r', the n by n part of
the array A must contain the hermitian matrix, such that
when UPLO = 'U' or 'u', the leading n by n upper triangular
part of the array A must contain the upper triangular part
of the hermitian matrix and the strictly lower triangular
part of A is not referenced, and when UPLO = 'L' or 'l',
the leading n by n lower triangular part of the array A
must contain the lower triangular part of the hermitian
matrix and the strictly upper triangular part of A is not
referenced.
Note that the imaginary parts of the diagonal elements need
not be set, they are assumed to be zero.
LDA
LDA is INTEGER
On entry, LDA specifies the first dimension of A as declared
in the calling (sub) program. When SIDE = 'L' or 'l' then
LDA must be at least max( 1, m ), otherwise LDA must be at
least max( 1, n ).
B
B is COMPLEX*16 array, dimension ( LDB, N )
Before entry, the leading m by n part of the array B must
contain the matrix B.
LDB
LDB is INTEGER
On entry, LDB specifies the first dimension of B as declared
in the calling (sub) program. LDB must be at least
max( 1, m ).
BETA
BETA is COMPLEX*16
On entry, BETA specifies the scalar beta. When BETA is
supplied as zero then C need not be set on input.
C
C is COMPLEX*16 array, dimension ( LDC, N )
Before entry, the leading m by n part of the array C must
contain the matrix C, except when beta is zero, in which
case C need not be set on entry.
On exit, the array C is overwritten by the m by n updated
matrix.
LDC
LDC is INTEGER
On entry, LDC specifies the first dimension of C as declared
in the calling (sub) program. LDC must be at least
max( 1, m ).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Level 3 Blas routine.
-- Written on 8-February-1989.
Jack Dongarra, Argonne National Laboratory.
Iain Duff, AERE Harwell.
Jeremy Du Croz, Numerical Algorithms Group Ltd.
Sven Hammarling, Numerical Algorithms Group Ltd.
subroutine zher2k (character UPLO, character TRANS, integer N, integer K, complex*16 ALPHA,
complex*16, dimension(lda,*) A, integer LDA, complex*16, dimension(ldb,*) B, integer LDB,
double precision BETA, complex*16, dimension(ldc,*) C, integer LDC)
ZHER2K
Purpose:
ZHER2K performs one of the hermitian rank 2k operations
C := alpha*A*B**H + conjg( alpha )*B*A**H + beta*C,
or
C := alpha*A**H*B + conjg( alpha )*B**H*A + beta*C,
where alpha and beta are scalars with beta real, C is an n by n
hermitian matrix and A and B are n by k matrices in the first case
and k by n matrices in the second case.
Parameters
UPLO
UPLO is CHARACTER*1
On entry, UPLO specifies whether the upper or lower
triangular part of the array C is to be referenced as
follows:
UPLO = 'U' or 'u' Only the upper triangular part of C
is to be referenced.
UPLO = 'L' or 'l' Only the lower triangular part of C
is to be referenced.
TRANS
TRANS is CHARACTER*1
On entry, TRANS specifies the operation to be performed as
follows:
TRANS = 'N' or 'n' C := alpha*A*B**H +
conjg( alpha )*B*A**H +
beta*C.
TRANS = 'C' or 'c' C := alpha*A**H*B +
conjg( alpha )*B**H*A +
beta*C.
N
N is INTEGER
On entry, N specifies the order of the matrix C. N must be
at least zero.
K
K is INTEGER
On entry with TRANS = 'N' or 'n', K specifies the number
of columns of the matrices A and B, and on entry with
TRANS = 'C' or 'c', K specifies the number of rows of the
matrices A and B. K must be at least zero.
ALPHA
ALPHA is COMPLEX*16 .
On entry, ALPHA specifies the scalar alpha.
A
A is COMPLEX*16 array, dimension ( LDA, ka ), where ka is
k when TRANS = 'N' or 'n', and is n otherwise.
Before entry with TRANS = 'N' or 'n', the leading n by k
part of the array A must contain the matrix A, otherwise
the leading k by n part of the array A must contain the
matrix A.
LDA
LDA is INTEGER
On entry, LDA specifies the first dimension of A as declared
in the calling (sub) program. When TRANS = 'N' or 'n'
then LDA must be at least max( 1, n ), otherwise LDA must
be at least max( 1, k ).
B
B is COMPLEX*16 array, dimension ( LDB, kb ), where kb is
k when TRANS = 'N' or 'n', and is n otherwise.
Before entry with TRANS = 'N' or 'n', the leading n by k
part of the array B must contain the matrix B, otherwise
the leading k by n part of the array B must contain the
matrix B.
LDB
LDB is INTEGER
On entry, LDB specifies the first dimension of B as declared
in the calling (sub) program. When TRANS = 'N' or 'n'
then LDB must be at least max( 1, n ), otherwise LDB must
be at least max( 1, k ).
Unchanged on exit.
BETA
BETA is DOUBLE PRECISION .
On entry, BETA specifies the scalar beta.
C
C is COMPLEX*16 array, dimension ( LDC, N )
Before entry with UPLO = 'U' or 'u', the leading n by n
upper triangular part of the array C must contain the upper
triangular part of the hermitian matrix and the strictly
lower triangular part of C is not referenced. On exit, the
upper triangular part of the array C is overwritten by the
upper triangular part of the updated matrix.
Before entry with UPLO = 'L' or 'l', the leading n by n
lower triangular part of the array C must contain the lower
triangular part of the hermitian matrix and the strictly
upper triangular part of C is not referenced. On exit, the
lower triangular part of the array C is overwritten by the
lower triangular part of the updated matrix.
Note that the imaginary parts of the diagonal elements need
not be set, they are assumed to be zero, and on exit they
are set to zero.
LDC
LDC is INTEGER
On entry, LDC specifies the first dimension of C as declared
in the calling (sub) program. LDC must be at least
max( 1, n ).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Level 3 Blas routine.
-- Written on 8-February-1989.
Jack Dongarra, Argonne National Laboratory.
Iain Duff, AERE Harwell.
Jeremy Du Croz, Numerical Algorithms Group Ltd.
Sven Hammarling, Numerical Algorithms Group Ltd.
-- Modified 8-Nov-93 to set C(J,J) to DBLE( C(J,J) ) when BETA = 1.
Ed Anderson, Cray Research Inc.
subroutine zherk (character UPLO, character TRANS, integer N, integer K, double precision
ALPHA, complex*16, dimension(lda,*) A, integer LDA, double precision BETA, complex*16,
dimension(ldc,*) C, integer LDC)
ZHERK
Purpose:
ZHERK performs one of the hermitian rank k operations
C := alpha*A*A**H + beta*C,
or
C := alpha*A**H*A + beta*C,
where alpha and beta are real scalars, C is an n by n hermitian
matrix and A is an n by k matrix in the first case and a k by n
matrix in the second case.
Parameters
UPLO
UPLO is CHARACTER*1
On entry, UPLO specifies whether the upper or lower
triangular part of the array C is to be referenced as
follows:
UPLO = 'U' or 'u' Only the upper triangular part of C
is to be referenced.
UPLO = 'L' or 'l' Only the lower triangular part of C
is to be referenced.
TRANS
TRANS is CHARACTER*1
On entry, TRANS specifies the operation to be performed as
follows:
TRANS = 'N' or 'n' C := alpha*A*A**H + beta*C.
TRANS = 'C' or 'c' C := alpha*A**H*A + beta*C.
N
N is INTEGER
On entry, N specifies the order of the matrix C. N must be
at least zero.
K
K is INTEGER
On entry with TRANS = 'N' or 'n', K specifies the number
of columns of the matrix A, and on entry with
TRANS = 'C' or 'c', K specifies the number of rows of the
matrix A. K must be at least zero.
ALPHA
ALPHA is DOUBLE PRECISION .
On entry, ALPHA specifies the scalar alpha.
A
A is COMPLEX*16 array, dimension ( LDA, ka ), where ka is
k when TRANS = 'N' or 'n', and is n otherwise.
Before entry with TRANS = 'N' or 'n', the leading n by k
part of the array A must contain the matrix A, otherwise
the leading k by n part of the array A must contain the
matrix A.
LDA
LDA is INTEGER
On entry, LDA specifies the first dimension of A as declared
in the calling (sub) program. When TRANS = 'N' or 'n'
then LDA must be at least max( 1, n ), otherwise LDA must
be at least max( 1, k ).
BETA
BETA is DOUBLE PRECISION.
On entry, BETA specifies the scalar beta.
C
C is COMPLEX*16 array, dimension ( LDC, N )
Before entry with UPLO = 'U' or 'u', the leading n by n
upper triangular part of the array C must contain the upper
triangular part of the hermitian matrix and the strictly
lower triangular part of C is not referenced. On exit, the
upper triangular part of the array C is overwritten by the
upper triangular part of the updated matrix.
Before entry with UPLO = 'L' or 'l', the leading n by n
lower triangular part of the array C must contain the lower
triangular part of the hermitian matrix and the strictly
upper triangular part of C is not referenced. On exit, the
lower triangular part of the array C is overwritten by the
lower triangular part of the updated matrix.
Note that the imaginary parts of the diagonal elements need
not be set, they are assumed to be zero, and on exit they
are set to zero.
LDC
LDC is INTEGER
On entry, LDC specifies the first dimension of C as declared
in the calling (sub) program. LDC must be at least
max( 1, n ).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Level 3 Blas routine.
-- Written on 8-February-1989.
Jack Dongarra, Argonne National Laboratory.
Iain Duff, AERE Harwell.
Jeremy Du Croz, Numerical Algorithms Group Ltd.
Sven Hammarling, Numerical Algorithms Group Ltd.
-- Modified 8-Nov-93 to set C(J,J) to DBLE( C(J,J) ) when BETA = 1.
Ed Anderson, Cray Research Inc.
subroutine zsymm (character SIDE, character UPLO, integer M, integer N, complex*16 ALPHA,
complex*16, dimension(lda,*) A, integer LDA, complex*16, dimension(ldb,*) B, integer LDB,
complex*16 BETA, complex*16, dimension(ldc,*) C, integer LDC)
ZSYMM
Purpose:
ZSYMM performs one of the matrix-matrix operations
C := alpha*A*B + beta*C,
or
C := alpha*B*A + beta*C,
where alpha and beta are scalars, A is a symmetric matrix and B and
C are m by n matrices.
Parameters
SIDE
SIDE is CHARACTER*1
On entry, SIDE specifies whether the symmetric matrix A
appears on the left or right in the operation as follows:
SIDE = 'L' or 'l' C := alpha*A*B + beta*C,
SIDE = 'R' or 'r' C := alpha*B*A + beta*C,
UPLO
UPLO is CHARACTER*1
On entry, UPLO specifies whether the upper or lower
triangular part of the symmetric matrix A is to be
referenced as follows:
UPLO = 'U' or 'u' Only the upper triangular part of the
symmetric matrix is to be referenced.
UPLO = 'L' or 'l' Only the lower triangular part of the
symmetric matrix is to be referenced.
M
M is INTEGER
On entry, M specifies the number of rows of the matrix C.
M must be at least zero.
N
N is INTEGER
On entry, N specifies the number of columns of the matrix C.
N must be at least zero.
ALPHA
ALPHA is COMPLEX*16
On entry, ALPHA specifies the scalar alpha.
A
A is COMPLEX*16 array, dimension ( LDA, ka ), where ka is
m when SIDE = 'L' or 'l' and is n otherwise.
Before entry with SIDE = 'L' or 'l', the m by m part of
the array A must contain the symmetric matrix, such that
when UPLO = 'U' or 'u', the leading m by m upper triangular
part of the array A must contain the upper triangular part
of the symmetric matrix and the strictly lower triangular
part of A is not referenced, and when UPLO = 'L' or 'l',
the leading m by m lower triangular part of the array A
must contain the lower triangular part of the symmetric
matrix and the strictly upper triangular part of A is not
referenced.
Before entry with SIDE = 'R' or 'r', the n by n part of
the array A must contain the symmetric matrix, such that
when UPLO = 'U' or 'u', the leading n by n upper triangular
part of the array A must contain the upper triangular part
of the symmetric matrix and the strictly lower triangular
part of A is not referenced, and when UPLO = 'L' or 'l',
the leading n by n lower triangular part of the array A
must contain the lower triangular part of the symmetric
matrix and the strictly upper triangular part of A is not
referenced.
LDA
LDA is INTEGER
On entry, LDA specifies the first dimension of A as declared
in the calling (sub) program. When SIDE = 'L' or 'l' then
LDA must be at least max( 1, m ), otherwise LDA must be at
least max( 1, n ).
B
B is COMPLEX*16 array, dimension ( LDB, N )
Before entry, the leading m by n part of the array B must
contain the matrix B.
LDB
LDB is INTEGER
On entry, LDB specifies the first dimension of B as declared
in the calling (sub) program. LDB must be at least
max( 1, m ).
BETA
BETA is COMPLEX*16
On entry, BETA specifies the scalar beta. When BETA is
supplied as zero then C need not be set on input.
C
C is COMPLEX*16 array, dimension ( LDC, N )
Before entry, the leading m by n part of the array C must
contain the matrix C, except when beta is zero, in which
case C need not be set on entry.
On exit, the array C is overwritten by the m by n updated
matrix.
LDC
LDC is INTEGER
On entry, LDC specifies the first dimension of C as declared
in the calling (sub) program. LDC must be at least
max( 1, m ).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Level 3 Blas routine.
-- Written on 8-February-1989.
Jack Dongarra, Argonne National Laboratory.
Iain Duff, AERE Harwell.
Jeremy Du Croz, Numerical Algorithms Group Ltd.
Sven Hammarling, Numerical Algorithms Group Ltd.
subroutine zsyr2k (character UPLO, character TRANS, integer N, integer K, complex*16 ALPHA,
complex*16, dimension(lda,*) A, integer LDA, complex*16, dimension(ldb,*) B, integer LDB,
complex*16 BETA, complex*16, dimension(ldc,*) C, integer LDC)
ZSYR2K
Purpose:
ZSYR2K performs one of the symmetric rank 2k operations
C := alpha*A*B**T + alpha*B*A**T + beta*C,
or
C := alpha*A**T*B + alpha*B**T*A + beta*C,
where alpha and beta are scalars, C is an n by n symmetric matrix
and A and B are n by k matrices in the first case and k by n
matrices in the second case.
Parameters
UPLO
UPLO is CHARACTER*1
On entry, UPLO specifies whether the upper or lower
triangular part of the array C is to be referenced as
follows:
UPLO = 'U' or 'u' Only the upper triangular part of C
is to be referenced.
UPLO = 'L' or 'l' Only the lower triangular part of C
is to be referenced.
TRANS
TRANS is CHARACTER*1
On entry, TRANS specifies the operation to be performed as
follows:
TRANS = 'N' or 'n' C := alpha*A*B**T + alpha*B*A**T +
beta*C.
TRANS = 'T' or 't' C := alpha*A**T*B + alpha*B**T*A +
beta*C.
N
N is INTEGER
On entry, N specifies the order of the matrix C. N must be
at least zero.
K
K is INTEGER
On entry with TRANS = 'N' or 'n', K specifies the number
of columns of the matrices A and B, and on entry with
TRANS = 'T' or 't', K specifies the number of rows of the
matrices A and B. K must be at least zero.
ALPHA
ALPHA is COMPLEX*16
On entry, ALPHA specifies the scalar alpha.
A
A is COMPLEX*16 array, dimension ( LDA, ka ), where ka is
k when TRANS = 'N' or 'n', and is n otherwise.
Before entry with TRANS = 'N' or 'n', the leading n by k
part of the array A must contain the matrix A, otherwise
the leading k by n part of the array A must contain the
matrix A.
LDA
LDA is INTEGER
On entry, LDA specifies the first dimension of A as declared
in the calling (sub) program. When TRANS = 'N' or 'n'
then LDA must be at least max( 1, n ), otherwise LDA must
be at least max( 1, k ).
B
B is COMPLEX*16 array, dimension ( LDB, kb ), where kb is
k when TRANS = 'N' or 'n', and is n otherwise.
Before entry with TRANS = 'N' or 'n', the leading n by k
part of the array B must contain the matrix B, otherwise
the leading k by n part of the array B must contain the
matrix B.
LDB
LDB is INTEGER
On entry, LDB specifies the first dimension of B as declared
in the calling (sub) program. When TRANS = 'N' or 'n'
then LDB must be at least max( 1, n ), otherwise LDB must
be at least max( 1, k ).
BETA
BETA is COMPLEX*16
On entry, BETA specifies the scalar beta.
C
C is COMPLEX*16 array, dimension ( LDC, N )
Before entry with UPLO = 'U' or 'u', the leading n by n
upper triangular part of the array C must contain the upper
triangular part of the symmetric matrix and the strictly
lower triangular part of C is not referenced. On exit, the
upper triangular part of the array C is overwritten by the
upper triangular part of the updated matrix.
Before entry with UPLO = 'L' or 'l', the leading n by n
lower triangular part of the array C must contain the lower
triangular part of the symmetric matrix and the strictly
upper triangular part of C is not referenced. On exit, the
lower triangular part of the array C is overwritten by the
lower triangular part of the updated matrix.
LDC
LDC is INTEGER
On entry, LDC specifies the first dimension of C as declared
in the calling (sub) program. LDC must be at least
max( 1, n ).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Level 3 Blas routine.
-- Written on 8-February-1989.
Jack Dongarra, Argonne National Laboratory.
Iain Duff, AERE Harwell.
Jeremy Du Croz, Numerical Algorithms Group Ltd.
Sven Hammarling, Numerical Algorithms Group Ltd.
subroutine zsyrk (character UPLO, character TRANS, integer N, integer K, complex*16 ALPHA,
complex*16, dimension(lda,*) A, integer LDA, complex*16 BETA, complex*16, dimension(ldc,*)
C, integer LDC)
ZSYRK
Purpose:
ZSYRK performs one of the symmetric rank k operations
C := alpha*A*A**T + beta*C,
or
C := alpha*A**T*A + beta*C,
where alpha and beta are scalars, C is an n by n symmetric matrix
and A is an n by k matrix in the first case and a k by n matrix
in the second case.
Parameters
UPLO
UPLO is CHARACTER*1
On entry, UPLO specifies whether the upper or lower
triangular part of the array C is to be referenced as
follows:
UPLO = 'U' or 'u' Only the upper triangular part of C
is to be referenced.
UPLO = 'L' or 'l' Only the lower triangular part of C
is to be referenced.
TRANS
TRANS is CHARACTER*1
On entry, TRANS specifies the operation to be performed as
follows:
TRANS = 'N' or 'n' C := alpha*A*A**T + beta*C.
TRANS = 'T' or 't' C := alpha*A**T*A + beta*C.
N
N is INTEGER
On entry, N specifies the order of the matrix C. N must be
at least zero.
K
K is INTEGER
On entry with TRANS = 'N' or 'n', K specifies the number
of columns of the matrix A, and on entry with
TRANS = 'T' or 't', K specifies the number of rows of the
matrix A. K must be at least zero.
ALPHA
ALPHA is COMPLEX*16
On entry, ALPHA specifies the scalar alpha.
A
A is COMPLEX*16 array, dimension ( LDA, ka ), where ka is
k when TRANS = 'N' or 'n', and is n otherwise.
Before entry with TRANS = 'N' or 'n', the leading n by k
part of the array A must contain the matrix A, otherwise
the leading k by n part of the array A must contain the
matrix A.
LDA
LDA is INTEGER
On entry, LDA specifies the first dimension of A as declared
in the calling (sub) program. When TRANS = 'N' or 'n'
then LDA must be at least max( 1, n ), otherwise LDA must
be at least max( 1, k ).
BETA
BETA is COMPLEX*16
On entry, BETA specifies the scalar beta.
C
C is COMPLEX*16 array, dimension ( LDC, N )
Before entry with UPLO = 'U' or 'u', the leading n by n
upper triangular part of the array C must contain the upper
triangular part of the symmetric matrix and the strictly
lower triangular part of C is not referenced. On exit, the
upper triangular part of the array C is overwritten by the
upper triangular part of the updated matrix.
Before entry with UPLO = 'L' or 'l', the leading n by n
lower triangular part of the array C must contain the lower
triangular part of the symmetric matrix and the strictly
upper triangular part of C is not referenced. On exit, the
lower triangular part of the array C is overwritten by the
lower triangular part of the updated matrix.
LDC
LDC is INTEGER
On entry, LDC specifies the first dimension of C as declared
in the calling (sub) program. LDC must be at least
max( 1, n ).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Level 3 Blas routine.
-- Written on 8-February-1989.
Jack Dongarra, Argonne National Laboratory.
Iain Duff, AERE Harwell.
Jeremy Du Croz, Numerical Algorithms Group Ltd.
Sven Hammarling, Numerical Algorithms Group Ltd.
subroutine ztrmm (character SIDE, character UPLO, character TRANSA, character DIAG, integer M,
integer N, complex*16 ALPHA, complex*16, dimension(lda,*) A, integer LDA, complex*16,
dimension(ldb,*) B, integer LDB)
ZTRMM
Purpose:
ZTRMM performs one of the matrix-matrix operations
B := alpha*op( A )*B, or B := alpha*B*op( A )
where alpha is a scalar, B is an m by n matrix, A is a unit, or
non-unit, upper or lower triangular matrix and op( A ) is one of
op( A ) = A or op( A ) = A**T or op( A ) = A**H.
Parameters
SIDE
SIDE is CHARACTER*1
On entry, SIDE specifies whether op( A ) multiplies B from
the left or right as follows:
SIDE = 'L' or 'l' B := alpha*op( A )*B.
SIDE = 'R' or 'r' B := alpha*B*op( A ).
UPLO
UPLO is CHARACTER*1
On entry, UPLO specifies whether the matrix A is an upper or
lower triangular matrix as follows:
UPLO = 'U' or 'u' A is an upper triangular matrix.
UPLO = 'L' or 'l' A is a lower triangular matrix.
TRANSA
TRANSA is CHARACTER*1
On entry, TRANSA specifies the form of op( A ) to be used in
the matrix multiplication as follows:
TRANSA = 'N' or 'n' op( A ) = A.
TRANSA = 'T' or 't' op( A ) = A**T.
TRANSA = 'C' or 'c' op( A ) = A**H.
DIAG
DIAG is CHARACTER*1
On entry, DIAG specifies whether or not A is unit triangular
as follows:
DIAG = 'U' or 'u' A is assumed to be unit triangular.
DIAG = 'N' or 'n' A is not assumed to be unit
triangular.
M
M is INTEGER
On entry, M specifies the number of rows of B. M must be at
least zero.
N
N is INTEGER
On entry, N specifies the number of columns of B. N must be
at least zero.
ALPHA
ALPHA is COMPLEX*16
On entry, ALPHA specifies the scalar alpha. When alpha is
zero then A is not referenced and B need not be set before
entry.
A
A is COMPLEX*16 array, dimension ( LDA, k ), where k is m
when SIDE = 'L' or 'l' and is n when SIDE = 'R' or 'r'.
Before entry with UPLO = 'U' or 'u', the leading k by k
upper triangular part of the array A must contain the upper
triangular matrix and the strictly lower triangular part of
A is not referenced.
Before entry with UPLO = 'L' or 'l', the leading k by k
lower triangular part of the array A must contain the lower
triangular matrix and the strictly upper triangular part of
A is not referenced.
Note that when DIAG = 'U' or 'u', the diagonal elements of
A are not referenced either, but are assumed to be unity.
LDA
LDA is INTEGER
On entry, LDA specifies the first dimension of A as declared
in the calling (sub) program. When SIDE = 'L' or 'l' then
LDA must be at least max( 1, m ), when SIDE = 'R' or 'r'
then LDA must be at least max( 1, n ).
B
B is COMPLEX*16 array, dimension ( LDB, N ).
Before entry, the leading m by n part of the array B must
contain the matrix B, and on exit is overwritten by the
transformed matrix.
LDB
LDB is INTEGER
On entry, LDB specifies the first dimension of B as declared
in the calling (sub) program. LDB must be at least
max( 1, m ).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Level 3 Blas routine.
-- Written on 8-February-1989.
Jack Dongarra, Argonne National Laboratory.
Iain Duff, AERE Harwell.
Jeremy Du Croz, Numerical Algorithms Group Ltd.
Sven Hammarling, Numerical Algorithms Group Ltd.
subroutine ztrsm (character SIDE, character UPLO, character TRANSA, character DIAG, integer M,
integer N, complex*16 ALPHA, complex*16, dimension(lda,*) A, integer LDA, complex*16,
dimension(ldb,*) B, integer LDB)
ZTRSM
Purpose:
ZTRSM solves one of the matrix equations
op( A )*X = alpha*B, or X*op( A ) = alpha*B,
where alpha is a scalar, X and B are m by n matrices, A is a unit, or
non-unit, upper or lower triangular matrix and op( A ) is one of
op( A ) = A or op( A ) = A**T or op( A ) = A**H.
The matrix X is overwritten on B.
Parameters
SIDE
SIDE is CHARACTER*1
On entry, SIDE specifies whether op( A ) appears on the left
or right of X as follows:
SIDE = 'L' or 'l' op( A )*X = alpha*B.
SIDE = 'R' or 'r' X*op( A ) = alpha*B.
UPLO
UPLO is CHARACTER*1
On entry, UPLO specifies whether the matrix A is an upper or
lower triangular matrix as follows:
UPLO = 'U' or 'u' A is an upper triangular matrix.
UPLO = 'L' or 'l' A is a lower triangular matrix.
TRANSA
TRANSA is CHARACTER*1
On entry, TRANSA specifies the form of op( A ) to be used in
the matrix multiplication as follows:
TRANSA = 'N' or 'n' op( A ) = A.
TRANSA = 'T' or 't' op( A ) = A**T.
TRANSA = 'C' or 'c' op( A ) = A**H.
DIAG
DIAG is CHARACTER*1
On entry, DIAG specifies whether or not A is unit triangular
as follows:
DIAG = 'U' or 'u' A is assumed to be unit triangular.
DIAG = 'N' or 'n' A is not assumed to be unit
triangular.
M
M is INTEGER
On entry, M specifies the number of rows of B. M must be at
least zero.
N
N is INTEGER
On entry, N specifies the number of columns of B. N must be
at least zero.
ALPHA
ALPHA is COMPLEX*16
On entry, ALPHA specifies the scalar alpha. When alpha is
zero then A is not referenced and B need not be set before
entry.
A
A is COMPLEX*16 array, dimension ( LDA, k ),
where k is m when SIDE = 'L' or 'l'
and k is n when SIDE = 'R' or 'r'.
Before entry with UPLO = 'U' or 'u', the leading k by k
upper triangular part of the array A must contain the upper
triangular matrix and the strictly lower triangular part of
A is not referenced.
Before entry with UPLO = 'L' or 'l', the leading k by k
lower triangular part of the array A must contain the lower
triangular matrix and the strictly upper triangular part of
A is not referenced.
Note that when DIAG = 'U' or 'u', the diagonal elements of
A are not referenced either, but are assumed to be unity.
LDA
LDA is INTEGER
On entry, LDA specifies the first dimension of A as declared
in the calling (sub) program. When SIDE = 'L' or 'l' then
LDA must be at least max( 1, m ), when SIDE = 'R' or 'r'
then LDA must be at least max( 1, n ).
B
B is COMPLEX*16 array, dimension ( LDB, N )
Before entry, the leading m by n part of the array B must
contain the right-hand side matrix B, and on exit is
overwritten by the solution matrix X.
LDB
LDB is INTEGER
On entry, LDB specifies the first dimension of B as declared
in the calling (sub) program. LDB must be at least
max( 1, m ).
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Further Details:
Level 3 Blas routine.
-- Written on 8-February-1989.
Jack Dongarra, Argonne National Laboratory.
Iain Duff, AERE Harwell.
Jeremy Du Croz, Numerical Algorithms Group Ltd.
Sven Hammarling, Numerical Algorithms Group Ltd.
Author
Generated automatically by Doxygen for LAPACK from the source code.