Provided by: freebsd-manpages_12.2-1_all bug

NAME

     bktr — Brooktree Bt848/849/878/879 and Pinnacle PCTV video capture driver

SYNOPSIS

     device bktr

     device iicbus
     device iicbb
     device smbus

DESCRIPTION

     The bktr driver provides support for PCI video capture and VBI capture on low cost, high
     performance boards.  The driver is based on the Matrox Meteor driver and uses the same API.
     The bktr driver should support most video cards based on the Brooktree Bt848/849/878/879
     Video Capture Chip.  Also supported are most Pinnacle PCTV video cards.  Furthermore, the
     driver supports FM Radio if the tuner supports it.

     The driver currently supports the following features:

           PCI to PCI dma transfer
           clipping
           yuv
           rgb16
           rgb24
           rgb32

     On the supported cards, tuners and other components are interconnected with an I2C bus.  The
     Brooktree848 chips act as a master device on the bus to control them.  Therefore, iicbus(4),
     iicbb(4) and smbus(4) controller declarations are mandatory to activate bktr support.

     The following kernel parameters may be used to further configure the driver:

     options BROOKTREE_ALLOC_PAGES=xxx specifies the number of contiguous pages to allocate when
     successfully probed.  The default number of pages allocated by the kernel is 216.  This
     means that there are (216*4096) bytes available for use.

     options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
     options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
     One of these options can be used to set the default video format for the driver.  This fixed
     random hangs and lockups with the VideoLogic Captivator PCI card.

     The following sysctls may be used to further configure the driver:

     sysctl hw.bt848.card=nnnn This can be used to override the card make which was detected at
     boot time.  ‘nnnn’ is set to an integer from 1 to 23 taken from the following table:

     MIRO                            1
     HAUPPAUGE                       2
     STB                             3
     INTEL                           4
     IMS_TURBO                       5
     AVER_MEDIA                      6
     OSPREY                          7
     NEC_PK                          8
     IO_GV                           9
     FLYVIDEO                        10
     ZOLTRIX                         11
     KISS                            12
     VIDEO_HIGHWAY_XTREME            13
     ASKEY_DYNALINK_MAGIC_TVIEW      14
     LEADTEK                         15
     TERRATVPLUS                     16
     IO_BCTV3                        17
     AOPEN_VA1000                    18
     PINNACLE_PCTV_RAVE              19
     PIXELVIEW_PLAYTV_PAK            20
     TERRATVALUE                     21
     PIXELVIEW_PLAYTV_PRO_REV_4C     22
     Bt848_MAX                       23

     sysctl hw.bt848.tuner=nnnn This can be used to override the tuner make which was detected at
     boot time.  ‘nnnn’ is set to an integer from 0 to 16 taken from the following table:

     NO_TUNER                0
     TEMIC_NTSC              1
     TEMIC_PAL               2
     TEMIC_SECAM             3
     PHILIPS_NTSC            4
     PHILIPS_PAL             5
     PHILIPS_SECAM           6
     TEMIC_PALI              7
     PHILIPS_PALI            8
     PHILIPS_FR1236_NTSC     9       /* These have FM Radio support */
     PHILIPS_FR1216_PAL      10      /* These have FM Radio support */
     PHILIPS_FR1236_SECAM    11      /* These have FM Radio support */
     ALPS_TSCH5              12
     ALPS_TSBH1              13
     MT2032                  14
     LG_TPI8PSB12P_PAL       15
     Bt848_MAX               16

HARDWARE

     The bktr driver supports video capture cards based on the Brooktree Bt848/849/878/879 chips,
     as well as Pinnacle PCTV cards, including:

        AOpen VA1000
        AVerMedia AVerTV Studio
        AVerMedia TF/FM-98
        ATI TV Wonder VE
        Hauppauge WinCast/TV
        Hauppauge WinTV-Go-FM
        Hauppauge WinTV-pci
        Hauppauge WinTV-radio
        Intel Smart Video Recorder III
        KWORLD PCI TV Tuner
        Miro PC TV
        Pinnacle PCTV Pro
        Pinnacle PCTV Rave
        PixelView PlayTV PAK
        PixelView PlayTV Pro (rev 4C, 9D)
        SIGMA TV II
        STB TV PCI Television Tuner
        Super TV Tuner
        TerraTec TValue
        V-Stream XPERT TV-PVR 878
        Video Highway XTreme
        VideoLogic Captivator PCI

FILES

     /usr/ports/multimedia/fxtv  A TV and Camera display program utilizing the bktr driver -
                                 requires that The X Window System and The Ports Collection also
                                 be installed.
     /usr/ports/audio/xmradio    An FM Radio Tuner for cards which have an FM Radio tuner fitted
                                 - requires that The X Window System and The Ports Collection
                                 also be installed.  It also requires Motif or the lesstif port.

SEE ALSO

     meteor(4)

HISTORY

     The bktr driver first appeared in FreeBSD 2.2.

AUTHORS

     This driver is based on the work of Jim Lowe <james@miller.cs.uwm.edu>, Mark Tinguely
     <tinguely@plains.nodak.edu>, Amancio Hasty <hasty@star-gate.com>, Roger Hardiman
     <roger@FreeBSD.org> and a bunch of other people.  Support for Pinnacle PCTV Rave cards was
     added by Branko Lankester <branko@euro.net>.