Provided by: dlt-tools_2.18.8-6_amd64 
NAME
dlt-system.conf - DLT system process configuration file
DESCRIPTION
The DLT system logging process is the central application, which logs system information
from the platform. It provides the features filetransfer, syslog adapater, logging of any
kind of files and procfilesystem logger. The individual features can be enabled and
disabled in the configuration file.
The configuration file dlt-system.conf allows to configure the different runtime behaviour
of dlt-system. The configuration file is loaded during startup of dlt-system.
dlt-system loads by default the configuration file /etc/dlt-system.conf. An alternative
configuration file can be loaded with the option -c.
GENERAL OPTIONS
ApplicationId
The application Id used for the dlt-system process.
Default: SYS
SHELL OPTIONS
ShellEnable
Enable the Shell for command line injections. Be careful when you enable this feature.
The user can send any kind of shell commands. The commands are executed with the rights
of the dlt-system process. Dlt-system is started by default as user genivi.
Default: 0
SYSLOG ADAPTER OPTIONS
SyslogEnable
If this option is set to 1, the syslog adapter feature is enabled. SyslogPort needs to be
configured too if Syslog is enabled.
Default: 0
SyslogContextId
This value defines context id of the syslog adapter.
Default: SYSL
SyslogPort
This value defines the UDP port opened for receiving log messages from syslog.
Configuration for syslog to forward log to this port is necessary. Adding this config *.*
@localhost:47111 in config file of syslog (usually in /etc/rsyslog.d/50-default.conf) and
restart the syslog service by command “sudo systemctl restart rsyslog.service”.
Default: 47111
SYSTEMD JOURNAL ADAPTER OPTIONS
JournalEnable
Enable the Systemd Journal Adapter. This feature is only available, when dlt is compiled
with the option “WITH_SYSTEMD_JOURNAL”. Dlt-system is started by default as user genivi,
see dlt-system.service file. The user genivi must be added to one of the groups `adm',
`wheel' or `systemd-journal' to have access to all journal entries.
Default: 0
JournalContextId
The Context Id of the journal adapter.
Default: JOUR
JournalCurrentBoot
Show only log entries of current boot and follow. If JournalCurrentBoot and JournalFollow
are not set all persistent journal entries will be logged.
Default: 1
JournalFollow
Show only the last 10 entries and follow.
Default: 0
JournalMapLogLevels
Map journal log levels to DLT log levels.
- 0 Emergency DLT_LOG_FATAL
- 1 Alert DLT_LOG_FATAL
- 2 Critical DLT_LOG_FATAL
- 3 Error DLT_LOG_ERROR
- 4 Warning DLT_LOG_WARN
- 5 Notice DLT_LOG_INFO
- 6 Informational DLT_LOG_INFO
- 7 Debug DLT_LOG_DEBUG
Default: 1
FILETRANSFER OPTIONS
FiletransferEnable
Enable the Filetransfer feature. 0 = disabled, 1 = enabled
Default: 0
FiletransferContextId
The Context Id of the filetransfer.
Default: FILE
FiletransferTimeStartup
Time in seconds after startup of dlt-system when first file is transfered.
Default: 0
FiletransferTimeoutBetweenLogs
Time in seconds to wait between two file transfer logs of a single file to DLT.
Default: 10
FiletransferDirectory
You can define multiple file transfer directories. Define the directory to watch, whether
to compress the file with zlib and the zlib compression level. For parsing purposes,
FiletransferCompressionLevel must be the last one of three values.
FiletransferCompression
See FiletransferDirectory option for explanation.
Default: 0
FiletransferCompressionLevel
See FiletransferDirectory option for explanation.
Default: 5
LOG FILES OPTIONS
LogFileEnable
If this option is set to 1, the log files feature is enabled.
Default: 0
LogFileFilename
This value sets the full filename path to the file, which should be logged.
LogFileMode
This value defines in which operation mode the file is logged. In mode 1 the file is only
logged once when dlt-system is started. In mode 2 the file is logged regularly every time
LogFileTimeDelay timer elapses. 0 = off, 1 = startup only, 2 = regular
LogFileTimeDelay
This value is used in mode 3 and defines the number of seconds, after which the defined
file is logged.
LogFileContextId
This value defines the context id, which is used for logging the file.
LOG PROCESSES OPTIONS
LogProcessesEnable
Enable the logging of processes. 0 = disabled, 1 = enabled
Default: 0
LogProcessesContextId
This value defines the context id, which is used for logging processes files.
Default: PROC
LogProcessName
This value defines the name of the process to be logged, as used in the file stat of each
process. If the value is defined as *, all processes are logged.
LogProcessFilename
This value sets the relative filename path to the file, which should be logged. The path
is relative to the procfilesystem folder of the process.
LogProcessMode
This value the defines in which operation mode this process file is logged. In mode 1 the
file is only logged once when dlt-system is started. In mode 2 the file is logged
regularly every time LogFileTimeDelay timer elapses. 0 = off, 1 = startup only, 2 =
regular.
Default: 0
LogProcessTimeDelay
This value is used in mode 3 and defines the number of seconds, after which the defined
procfilesystem file is logged.
Default: 0
AUTHOR
Alexander Wenzel (alexander.aw.wenzel (at) bmw (dot) de)
COPYRIGHT
Copyright (C) 2015 BMW AG. License MPL-2.0: Mozilla Public License version 2.0
<http://mozilla.org/MPL/2.0/>.
BUGS
See Github issue: <https://github.com/GENIVI/dlt-daemon/issues>
SEE ALSO
dlt-system(1), dlt-daemon(1)
DLT-SYSTEM.CONF(5)