Provided by: isakmpd_20041012-10build1_amd64 
NAME
isakmpd.conf — configuration file for isakmpd
DESCRIPTION
isakmpd.conf is the configuration file for the isakmpd daemon managing security association
and key management for the IPsec layer of the kernel's networking stack.
The file is of a well known type of format called .INI style, named after the suffix used by
an overrated windowing environment for its configuration files. This format consists of
sections, each beginning with a line looking like:
[Section name]
Between the brackets is the name of the section following this section header. Inside a
section many tag/value pairs can be stored, each one looking like:
Tag=Value
If the value needs more space than fits on a single line it's possible to continue it on the
next by ending the first with a backslash character immediately before the newline
character. This method can extend a value for an arbitrary number of lines.
Comments can be put anywhere in the file by using a hash mark (‘#’). The comment extends to
the end of the current line.
Often the right-hand side values consist of other section names. This results in a tree
structure. Some values are treated as a list of several scalar values. Such lists always
use a comma character as the separator. Some values are formatted like this: X,Y:Z, which
is an offer/accept syntax, where X is a value we offer and Y:Z is a range of accepted
values, inclusive.
To activate changes to isakmpd.conf without restarting isakmpd, send a SIGHUP signal to the
daemon process.
Auto-generated parts of the configuration
Some predefined section names are recognized by the daemon, avoiding the need to fully
specify the Main Mode transforms and Quick Mode suites, protocols, and transforms.
For Main Mode:
{DES,BLF,3DES,CAST,AES}-{MD5,SHA}[-GRP{1,2,5,14}][-{DSS,RSA_SIG}]
For Quick Mode:
QM-{proto}[-TRP]-{cipher}[-{hash}][-PFS[-{group}]]-SUITE
where
{proto} is either ESP or AH
{cipher} is either DES, 3DES, CAST, BLF or AES
{hash} is either MD5, SHA, RIPEMD, SHA2-{256,384,512}
{group} is either GRP1, GRP2, GRP5 or GRP14
For example, 3DES-SHA means: 3DES encryption, SHA hash, and authorization by pre-shared
keys. Similarly, QM-ESP-3DES-SHA-PFS-SUITE means: ESP protocol, 3DES encryption, SHA hash,
and use Perfect Forward Secrecy.
Unless explicitly stated with -GRP1, 2, 5 or 14 transforms and PFS suites use DH group 2.
There are currently no predefined ESP+AH Quick Mode suites.
The predefinitions include some default values for the special sections "General",
"Keynote", "X509-certificates", and "Default-phase-1-configuration". These default values
are presented in the example below.
All autogenerated values can be overridden by manual entries by using the same section and
tag names in the configuration file. In particular, the default phase 1 (Main or Aggressive
Mode) and phase 2 (Quick Mode) lifetimes can be overridden by these tags under the "General"
section;
[General]
Default-phase-1-lifetime= 3600,60:86400
Default-phase-2-lifetime= 1200,60:86400
The Main Mode lifetime currently defaults to one hour (minimum 60 seconds, maximum 1 day).
The Quick Mode lifetime defaults to 20 minutes (minimum 60 seconds, maximum 1 day).
Also, the default phase 1 ID can be set by creating a <Phase1-ID> section, as shown below,
and adding this tag under the "General" section;
[General]
Default-phase-1-ID= Phase1-ID-name
[Phase1-ID-name]
ID-type= USER_FQDN
Name= foo@bar.com
Roots
General Generic global configuration parameters
Default-phase-1-ID
Optional default phase 1 ID name.
Default-phase-1-lifetime
The default lifetime for autogenerated transforms (phase 1). If
unspecified, the value 3600,60:86400 is used as the default.
Default-phase-2-lifetime
The default lifetime for autogenerated suites (phase 2). If
unspecified, the value 1200,60:86400 is used as the default.
Default-phase-2-suites
A list of phase 2 suites that will be used when establishing
dynamic SAs. If left unspecified, QM-ESP-3DES-SHA-PFS-SUITE is
used as the default.
Acquire-Only If this tag is defined, isakmpd will not set up flows
automatically. This is useful when flows are configured with
ipsecadm(4) or by other programs like bgpd(8). Thus isakmpd
only takes care of the SA establishment.
Check-interval
The interval between watchdog checks of connections we want up
at all times.
DPD-check-interval
The interval between RFC 3706 (Dead Peer Detection) messages.
The default value is 0 (zero), which means DPD is disabled.
Exchange-max-time
How many seconds should an exchange maximally take to set up
before we give up.
Listen-on A list of IP-addresses OK to listen on. This list is used as a
filter for the set of addresses the interfaces configured
provides. This means that we won't see if an address given here
does not exist on this host, and thus no error is given for that
case.
Loglevel A list of the form class=level, where both class and level are
numbers. This is similar to the -D command line switch of
isakmpd. See isakmpd(8) for details.
Logverbose If this tag is defined, whatever the value is, verbose logging
is enabled. This is similar to the -v command line switch of
isakmpd. See isakmpd(8) for details.
NAT-T-Keepalive
The number of seconds between NAT-T keepalive messages, sent by
the peer behind NAT to keep the mapping active. Defaults to 20.
Policy-file The name of the file that contains keynote(4) policies. The
default is "/etc/isakmpd/isakmpd.policy".
Pubkey-directory
The directory in which isakmpd.conf looks for explicitly trusted
public keys. The default is "/etc/isakmpd/pubkeys". Read
isakmpd(8) for the required naming convention of the files in
here.
Renegotiate-on-HUP
If this tag is defined, whatever the value is, isakmpd will
renegotiate all current phase 2 SAs when the daemon receives a
SIGHUP signal, or an ‘R’ is sent to the FIFO interface (see
isakmpd(8)).
Retransmits How many times should a message be retransmitted before giving
up.
Shared-SADB If this tag is defined, whatever the value is, some semantics of
isakmpd.conf are changed so that multiple instances can run on
top of one SADB and set up SAs with each other. Specifically
this means replay protection will not be asked for, and errors
that can occur when updating an SA with its parameters a 2nd
time will be ignored.
Use-Keynote This tag controls the use of keynote(4) policy checking. The
default value is "yes", which enables the policy checking. When
set to any other value, policies will not be checked. This is
useful when policies for flows and SA establishment are arranged
by other programs like ipsecadm(8) or bgpd(8).
Phase 1 ISAKMP SA negotiation parameter root
<IP-address> A name of the ISAKMP peer at the given IP-address.
Default A name of the default ISAKMP peer. Incoming phase 1 connections
from other IP-addresses will use this peer name.
This name is used as the section name for further information to
be found. Look at <ISAKMP-peer> below.
Phase 2 IPsec SA negotiation parameter root
Connections A list of directed IPsec "connection" names that should be
brought up automatically, either on first use if the system
supports it, or at startup of the daemon. These names are
section names where further information can be found. Look at
<IPsec-connection> below. Normally any connections mentioned
here are treated as part of the "Passive-connection" list we
present below, however there is a flag: "Active-only" that
disables this behaviour. This too is mentioned in the <IPsec-
connection> section, in the "Flags" tag.
Passive-connections
A list of IPsec "connection" names we recognize and accept
initiations for. These names are section names where further
information can be found. Look at <IPsec-connection> below.
Currently only the Local-ID and Remote-ID tags are looked at in
those sections, as they are matched against the IDs given by the
initiator.
KeyNote
Credential-directory
A directory containing directories named after IDs (IP
addresses, “user@domain”, or hostnames) that contain files named
“credentials” and “private_key”.
The credentials file contains keynote(4) credentials that are
sent to a remote IKE daemon when we use the associated ID, or
credentials that we may want to consider when doing an exchange
with a remote IKE daemon that uses that ID. Note that, in the
former case, the last credential in the file MUST contain our
public key in its Licensees field. More than one credentials
may exist in the file. They are separated by whitelines (the
format is essentially the same as that of the policy file). The
credentials are of the same format as the policies described in
isakmpd.policy(5). The only difference is that the Authorizer
field contains a public key, and the assertion is signed.
Signed assertions can be generated using the keynote(1) utility.
The private_key file contains the private RSA key we use for
authentication. If the directory (and the files) exist, they
take precedence over X509-based authentication.
X509-Certificates
Accept-self-signed
If this tag is defined, whatever the value is, certificates that
do not originate from a trusted CA but are self-signed will be
accepted.
Ca-directory A directory containing PEM certificates of certification
authorities that we trust to sign other certificates. Note that
for a CA to be really trusted, it needs to be somehow referred
to by policy, in isakmpd.policy(5). The certificates in this
directory are used for the actual X.509 authentication and for
cross-referencing policies that refer to Distinguished Names
(DNs). Keeping a separate directory (as opposed to integrating
policies and X.509 CA certificates) allows for maintenance of a
list of "well known" CAs without actually having to trust all
(or any) of them.
Cert-directory
A directory containing PEM certificates that we trust to be
valid. These certificates are used in preference to those
passed in messages and are required to have a subjectAltName
extension containing the certificate holder identity; usually IP
address, FQDN, or User FQDN, as provided by certpatch(8).
Private-key The private key matching the public key of our certificate
(which should be in the "Cert-directory", and have an
appropriate subjectAltName field).
Referred-to sections
<ISAKMP-peer> Parameters for negotiation with an ISAKMP peer
Phase The constant 1, as ISAKMP-peers and IPsec-connections really are
handled by the same code inside isakmpd.
Transport The name of the transport protocol, defaults to UDP.
Port In case of UDP, the UDP port number to send to. This is
optional, the default value is 500 which is the IANA-registered
number for ISAKMP.
Local-address
The Local IP-address to use, if we are multi-homed, or have
aliases.
Address If existent, the IP-address of the peer.
Configuration
The name of the ISAKMP-configuration section to use. Look at
<ISAKMP-configuration> below. If unspecified, defaults to
"Default-phase-1-configuration".
Authentication
If existent, authentication data for this specific peer. In the
case of preshared key, this is the key value itself.
ID If existent, the name of the section that describes the local
client ID that we should present to our peer. If not present,
it defaults to the address of the local interface we are sending
packets over to the remote daemon. Look at <Phase1-ID> below.
Remote-ID If existent, the name of the section that describes the remote
client ID we expect the remote daemon to send us. If not
present, it defaults to the address of the remote daemon. Look
at <Phase1-ID> below.
Flags A comma-separated list of flags controlling the further handling
of the ISAKMP SA. Currently there are no specific ISAKMP SA
flags defined.
<Phase1-ID>
ID-type The ID type as given by the RFC specifications. For phase 1
this is currently IPV4_ADDR, IPV4_ADDR_SUBNET, IPV6_ADDR,
IPV6_ADDR_SUBNET, FQDN, USER_FQDN or KEY_ID.
Address If the ID-type is IPV4_ADDR or IPV6_ADDR, this tag should exist
and be an IP-address.
Network If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET this tag
should exist and be a network address.
Netmask If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET this tag
should exist and be a network subnet mask.
Name If the ID-type is FQDN, USER_FQDN or KEY_ID, this tag should
exist and contain a domain name, user@domain, or other
identifying string respectively.
In the case of KEY_ID, note that the IKE protocol allows any
octet sequence to be sent or received under this payload,
potentially including non-printable ones. isakmpd(8) can only
transmit printable KEY_ID payloads, but can receive and process
arbitrary KEY_ID payloads. This effectively means that non-
printable KEY_ID remote identities cannot be verified through
this means, although it is still possible to do so through
isakmpd.policy(5).
<ISAKMP-configuration>
DOI The domain of interpretation as given by the RFCs. Normally
IPSEC. If unspecified, defaults to IPSEC.
EXCHANGE_TYPE
The exchange type as given by the RFCs. For main mode this is
ID_PROT and for aggressive mode it is AGGRESSIVE.
Transforms A list of proposed transforms to use for protecting the ISAKMP
traffic. These are actually names for sections further
describing the transforms. Look at <ISAKMP-transform> below.
<ISAKMP-transform>
ENCRYPTION_ALGORITHM
The encryption algorithm as the RFCs name it, or ANY to denote
that any encryption algorithm proposed will be accepted.
KEY_LENGTH For encryption algorithms with variable key length, this is
where the offered/accepted keylengths are described. The value
is of the offer-accept kind described above.
HASH_ALGORITHM
The hash algorithm as the RFCs name it, or ANY.
AUTHENTICATION_METHOD
The authentication method as the RFCs name it, or ANY.
GROUP_DESCRIPTION
The group used for Diffie-Hellman exponentiations, or ANY. The
names are symbolic, like MODP_768, MODP_1024, EC_155 and EC_185.
PRF The algorithm to use for the keyed pseudo-random function (used
for key derivation and authentication in phase 1), or ANY.
Life A list of lifetime descriptions, or ANY. In the former case,
each element is in itself a name of the section that defines the
lifetime. Look at <Lifetime> below. If it is set to ANY, then
any type of proposed lifetime type and value will be accepted.
<Lifetime>
LIFE_TYPE SECONDS or KILOBYTES depending on the type of the duration.
Notice that this field may NOT be set to ANY.
LIFE_DURATION
An offer/accept kind of value, see above. Can also be set to
ANY.
<IPsec-connection>
Phase The constant 2, as ISAKMP-peers and IPsec-connections really are
handled by the same code inside isakmpd.
ISAKMP-peer The name of the ISAKMP-peer which to talk to in order to set up
this connection. The value is the name of an <ISAKMP-peer>
section. See above.
Configuration
The name of the IPsec-configuration section to use. Look at
<IPsec-configuration> below.
Local-ID If existent, the name of the section that describes the optional
local client ID that we should present to our peer. It is also
used when we act as responders to find out what <IPsec-
connection> we are dealing with. Look at <IPsec-ID> below.
Remote-ID If existent, the name of the section that describes the optional
remote client ID that we should present to our peer. It is also
used when we act as responders to find out what <IPsec-
connection> we are dealing with. Look at <IPsec-ID> below.
Flags A comma-separated list of flags controlling the further handling
of the IPsec SA. Currently only one flag is defined:
Active-only If this flag is given and this <IPsec-connection>
is part of the phase 2 connections we
automatically keep up, it will not automatically
be used for accepting connections from the peer.
<IPsec-configuration>
DOI The domain of interpretation as given by the RFCs. Normally
IPSEC. If unspecified, defaults to IPSEC.
EXCHANGE_TYPE
The exchange type as given by the RFCs. For quick mode this is
QUICK_MODE.
Suites A list of protection suites (bundles of protocols) usable for
protecting the IP traffic. Each of the list elements is a name
of an <IPsec-suite> section. See below.
<IPsec-suite>
Protocols A list of the protocols included in this protection suite. Each
of the list elements is a name of an <IPsec-protocol> section.
See below.
<IPsec-protocol>
PROTOCOL_ID The protocol as given by the RFCs. Acceptable values today are
IPSEC_AH and IPSEC_ESP.
Transforms A list of transforms usable for implementing the protocol. Each
of the list elements is a name of an <IPsec-transform> section.
See below.
ReplayWindow The size of the window used for replay protection. This is
normally left alone. Look at the ESP and AH RFCs for a better
description.
<IPsec-transform>
TRANSFORM_ID The transform ID as given by the RFCs.
ENCAPSULATION_MODE
The encapsulation mode as given by the RFCs. This means
TRANSPORT or TUNNEL.
AUTHENTICATION_ALGORITHM
The optional authentication algorithm in the case of this being
an ESP transform.
GROUP_DESCRIPTION
An optional (provides PFS if present) Diffie-Hellman group
description. The values are the same as GROUP_DESCRIPTION's in
<ISAKMP-transform> sections shown above.
Life List of lifetimes, each element is a <Lifetime> section name.
<IPsec-ID>
ID-type The ID type as given by the RFCs. For IPsec this is currently
IPV4_ADDR, IPV6_ADDR, IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET.
Address If the ID-type is IPV4_ADDR or IPV6_ADDR this tag should exist
and be an IP-address.
Network If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET this tag
should exist and be a network address.
Netmask If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET this tag
should exist and be a network subnet mask.
Protocol If the ID-type is IPV4_ADDR, IPV4_ADDR_SUBNET, IPV6_ADDR or
IPV6_ADDR_SUBNET this tag indicates what transport protocol
should be transmitted over the SA. If left unspecified, all
transport protocols between the two address (ranges) will be
sent (or permitted) over that SA.
Port If the ID-type is IPV4_ADDR, IPV4_ADDR_SUBNET, IPV6_ADDR or
IPV6_ADDR_SUBNET this tag indicates what source or destination
port is allowed to be transported over the SA (depending on
whether this is a local or remote ID). If left unspecified, all
ports of the given transport protocol will be transmitted (or
permitted) over the SA. The Protocol tag must be specified in
conjunction with this tag.
Other sections
<IKECFG-ID> Parameters to use with IKE mode-config. One ID per peer.
An IKECFG-ID is written as [<ID-type>/<name>]. The following ID types are
supported:
IPv4 [ipv4/A.B.C.D]
IPv6 [ipv6/abcd:abcd::ab:cd]
FQDN [fqdn/foo.bar.org]
UFQDN [ufqdn/user@foo.bar.org]
ASN1_DN [asn1_dn//C=aa/O=cc/...] (Note the double slashes as the DN
itself starts with a ‘/’.)
Each section specifies what configuration values to return to the peer
requesting IKE mode-config. Currently supported values are:
Address The peer's network address.
Netmask The peer's netmask.
Nameserver The IP address of a DNS nameserver.
WINS-server The IP address of a WINS server.
<Initiator-ID>
During phase 1 negotiation isakmpd looks for a pre-shared key in the <ISAKMP-
peer> section. If no Authentication data is specified in that section, and
isakmpd is not the initiator, it looks for Authentication data in a section
named after the initiator's phase 1 ID. This allows mobile users with dynamic
IP addresses to have different shared secrets.
This only works for aggressive mode because in main mode the remote initiator
ID would not yet be known.
The name of the <Initiator-ID> section depends on the ID type sent by the
initiator. Currently this can be:
IPv4 [A.B.C.D]
IPv6 [abcd:abcd::ab:cd]
FQDN [foo.bar.org]
UFQDN [user@foo.bar.org]
FILES
/etc/isakmpd/isakmpd.conf The default isakmpd configuration file.
/usr/share/ipsec/isakmpd/ A directory containing some sample isakmpd configuration files.
EXAMPLES
An example of a configuration file:
# A configuration sample for the isakmpd ISAKMP/Oakley (aka IKE) daemon.
[General]
Listen-on= 10.1.0.2
# Incoming phase 1 negotiations are multiplexed on the source IP address
[Phase 1]
10.1.0.1= ISAKMP-peer-west
# These connections are walked over after config file parsing and told
# to the application layer so that it will inform us when traffic wants to
# pass over them.
This means we can do on-demand keying.
[Phase 2]
Connections= IPsec-east-west
# Default values are commented out.
[ISAKMP-peer-west]
Phase= 1
#Transport= udp
Local-address= 10.1.0.2
Address= 10.1.0.1
#Port= isakmp
#Port= 500
#Configuration= Default-phase-1-configuration
Authentication= mekmitasdigoat
#Flags=
[IPsec-east-west]
Phase= 2
ISAKMP-peer= ISAKMP-peer-west
Configuration= Default-quick-mode
Local-ID= Net-east
Remote-ID= Net-west
#Flags=
[Net-west]
ID-type= IPV4_ADDR_SUBNET
Network= 192.168.1.0
Netmask= 255.255.255.0
[Net-east]
ID-type= IPV4_ADDR_SUBNET
Network= 192.168.2.0
Netmask= 255.255.255.0
# Quick mode descriptions
[Default-quick-mode]
EXCHANGE_TYPE= QUICK_MODE
Suites= QM-ESP-3DES-SHA-PFS-SUITE,QM-ESP-AES-SHA-PFS-SUITE
# Data for an IKE mode-config peer
[asn1_dn//C=SE/L=SomeCity/O=SomeCompany/CN=SomePeer.company.com]
Address= 192.168.1.123
Netmask= 255.255.255.0
Nameserver= 192.168.1.10
WINS-server= 192.168.1.11
# pre-shared key based on initiator's phase 1 ID
[foo.bar.org]
Authentication= mekmitasdigoat
#
# #####################################################################
# All configuration data below this point is not required as the example
# uses the predefined Main Mode transform and Quick Mode suite names.
# It is included here for completeness. Note the default values for the
# [General] and [X509-certificates] sections just below.
# #####################################################################
#
[General]
Policy-file= /etc/isakmpd/isakmpd.policy
Retransmits= 3
Exchange-max-time= 120
# KeyNote credential storage
[KeyNote]
Credential-directory= /etc/isakmpd/keynote/
# Certificates stored in PEM format
[X509-certificates]
CA-directory= /etc/isakmpd/ca/
Cert-directory= /etc/isakmpd/certs/
CRL-directory= /etc/isakmpd/crls/
Private-key= /etc/isakmpd/private/local.key
# Default phase 1 description (Main Mode)
[Default-phase-1-configuration]
EXCHANGE_TYPE= ID_PROT
Transforms= 3DES-SHA
# Main mode transforms
######################
# DES
[DES-MD5]
ENCRYPTION_ALGORITHM= DES_CBC
HASH_ALGORITHM= MD5
AUTHENTICATION_METHOD= PRE_SHARED
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-1-lifetime
[DES-SHA]
ENCRYPTION_ALGORITHM= DES_CBC
HASH_ALGORITHM= SHA
AUTHENTICATION_METHOD= PRE_SHARED
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-1-lifetime
# 3DES
[3DES-SHA]
ENCRYPTION_ALGORITHM= 3DES_CBC
HASH_ALGORITHM= SHA
AUTHENTICATION_METHOD= PRE_SHARED
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-1-lifetime
# Blowfish
[BLF-SHA]
ENCRYPTION_ALGORITHM= BLOWFISH_CBC
KEY_LENGTH= 128,96:192
HASH_ALGORITHM= SHA
AUTHENTICATION_METHOD= PRE_SHARED
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-1-lifetime
# Blowfish, using DH group 4 (non-default)
[BLF-SHA-EC185]
ENCRYPTION_ALGORITHM= BLOWFISH_CBC
KEY_LENGTH= 128,96:192
HASH_ALGORITHM= SHA
AUTHENTICATION_METHOD= PRE_SHARED
GROUP_DESCRIPTION= EC2N_185
Life= Default-phase-1-lifetime
# Quick mode protection suites
##############################
# DES
[QM-ESP-DES-SUITE]
Protocols= QM-ESP-DES
[QM-ESP-DES-PFS-SUITE]
Protocols= QM-ESP-DES-PFS
[QM-ESP-DES-MD5-SUITE]
Protocols= QM-ESP-DES-MD5
[QM-ESP-DES-MD5-PFS-SUITE]
Protocols= QM-ESP-DES-MD5-PFS
[QM-ESP-DES-SHA-SUITE]
Protocols= QM-ESP-DES-SHA
[QM-ESP-DES-SHA-PFS-SUITE]
Protocols= QM-ESP-DES-SHA-PFS
# 3DES
[QM-ESP-3DES-SHA-SUITE]
Protocols= QM-ESP-3DES-SHA
[QM-ESP-3DES-SHA-PFS-SUITE]
Protocols= QM-ESP-3DES-SHA-PFS
# AES
[QM-ESP-AES-SHA-SUITE]
Protocols= QM-ESP-AES-SHA
[QM-ESP-AES-SHA-PFS-SUITE]
Protocols= QM-ESP-AES-SHA-PFS
# AH
[QM-AH-MD5-SUITE]
Protocols= QM-AH-MD5
[QM-AH-MD5-PFS-SUITE]
Protocols= QM-AH-MD5-PFS
# AH + ESP (non-default)
[QM-AH-MD5-ESP-DES-SUITE]
Protocols= QM-AH-MD5,QM-ESP-DES
[QM-AH-MD5-ESP-DES-MD5-SUITE]
Protocols= QM-AH-MD5,QM-ESP-DES-MD5
[QM-ESP-DES-MD5-AH-MD5-SUITE]
Protocols= QM-ESP-DES-MD5,QM-AH-MD5
# Quick mode protocols
# DES
[QM-ESP-DES]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-DES-XF
[QM-ESP-DES-MD5]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-DES-MD5-XF
[QM-ESP-DES-MD5-PFS]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-DES-MD5-PFS-XF
[QM-ESP-DES-SHA]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-DES-SHA-XF
# 3DES
[QM-ESP-3DES-SHA]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-3DES-SHA-XF
[QM-ESP-3DES-SHA-PFS]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-3DES-SHA-PFS-XF
[QM-ESP-3DES-SHA-TRP]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-3DES-SHA-TRP-XF
# AES
[QM-ESP-AES-SHA]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-AES-SHA-XF
[QM-ESP-AES-SHA-PFS]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-AES-SHA-PFS-XF
[QM-ESP-AES-SHA-TRP]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-AES-SHA-TRP-XF
# AH MD5
[QM-AH-MD5]
PROTOCOL_ID= IPSEC_AH
Transforms= QM-AH-MD5-XF
[QM-AH-MD5-PFS]
PROTOCOL_ID= IPSEC_AH
Transforms= QM-AH-MD5-PFS-XF
# Quick mode transforms
# ESP DES+MD5
[QM-ESP-DES-XF]
TRANSFORM_ID= DES
ENCAPSULATION_MODE= TUNNEL
Life= Default-phase-2-lifetime
[QM-ESP-DES-MD5-XF]
TRANSFORM_ID= DES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_MD5
Life= Default-phase-2-lifetime
[QM-ESP-DES-MD5-PFS-XF]
TRANSFORM_ID= DES
ENCAPSULATION_MODE= TUNNEL
GROUP_DESCRIPTION= MODP_1024
AUTHENTICATION_ALGORITHM= HMAC_MD5
Life= Default-phase-2-lifetime
[QM-ESP-DES-SHA-XF]
TRANSFORM_ID= DES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_SHA
Life= Default-phase-2-lifetime
# 3DES
[QM-ESP-3DES-SHA-XF]
TRANSFORM_ID= 3DES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_SHA
Life= Default-phase-2-lifetime
[QM-ESP-3DES-SHA-PFS-XF]
TRANSFORM_ID= 3DES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_SHA
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-2-lifetime
[QM-ESP-3DES-SHA-TRP-XF]
TRANSFORM_ID= 3DES
ENCAPSULATION_MODE= TRANSPORT
AUTHENTICATION_ALGORITHM= HMAC_SHA
Life= Default-phase-2-lifetime
# AES
[QM-ESP-AES-SHA-XF]
TRANSFORM_ID= AES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_SHA
Life= Default-phase-2-lifetime
[QM-ESP-AES-SHA-PFS-XF]
TRANSFORM_ID= AES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_SHA
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-2-lifetime
[QM-ESP-AES-SHA-TRP-XF]
TRANSFORM_ID= AES
ENCAPSULATION_MODE= TRANSPORT
AUTHENTICATION_ALGORITHM= HMAC_SHA
Life= Default-phase-2-lifetime
# AH
[QM-AH-MD5-XF]
TRANSFORM_ID= MD5
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_MD5
Life= Default-phase-2-lifetime
[QM-AH-MD5-PFS-XF]
TRANSFORM_ID= MD5
ENCAPSULATION_MODE= TUNNEL
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-2-lifetime
[Sample-Life-Time]
LIFE_TYPE= SECONDS
LIFE_DURATION= 3600,1800:7200
[Sample-Life-Volume]
LIFE_TYPE= KILOBYTES
LIFE_DURATION= 1000,768:1536
SEE ALSO
keynote(1), ipsec(4), keynote(4), isakmpd.policy(5), isakmpd(8)
BUGS
The RFCs do not permit differing DH groups in the same proposal for aggressive and quick
mode exchanges. Mixing both PFS and non-PFS suites in a quick mode proposal is not
possible, as PFS implies using a DH group.