Provided by: texlive-luatex_2022.20230122-2_all 
NAME
luaotfload.conf - Luaotfload configuration file
SYNOPSIS
• ./luaotfload{.conf,rc}
• XDG_CONFIG_HOME/luaotfload/luaotfload{.conf,rc}
• ~/.luaotfloadrc
DESCRIPTION
The file luaotfload.conf contains configuration options for Luaotfload, a font loading and
font management component for LuaTeX.
EXAMPLE
A small Luaotfload configuration file with few customizations could look as follows:
[db]
formats = afm,ttf
compress = false
[misc]
termwidth = 60
[run]
log-level = 6
This will make Luaotfload ignore all font files except for PostScript binary fonts with a
matching AFM file, and Truetype fonts. Also, an uncompressed index file will be dumped
which is going to be much larger than the default gzip’ed index. The terminal width is
truncated to 60 characters which influences the verbose output during indexing. Finally,
the verbosity is increased greatly: each font file being processed will be printed to the
stdout on a separate line, along with lots of other information.
To observe the difference in behavior, save above snippet to ./luaotfload.conf and update
the font index:
luaotfload-tool --update --force
The current configuration can be written to disk using luaotfload-tool:
luaotfload-tool --dumpconf > luaotfload.conf
The result can itself be used as a configuration file.
SYNTAX
The configuration file syntax follows the common INI format. For a more detailed
description please refer to the section “CONFIGURATION FILE” of git-config(1). A brief
list of rules is given below:
• Blank lines and lines starting with a semicolon (;) are ignored.
• A configuration file is partitioned into sections that are declared by specifying the
section title in brackets on a separate line:
[some-section]
... section content ...
• Sections consist of one or more variable assignments of the form variable-name =
value E. g.:
[foo]
bar = baz
quux = xyzzy
...
• Section and variable names may contain only uppercase and lowercase letters as well
as dashes (-).
VARIABLES
Variables in belong into a configuration section and their values must be of a certain
type. Some of them have further constraints. For example, the “color callback” must be a
string of one of the values post_linebreak_filter, pre_linebreak_filter, or
pre_output_filter, defined in the section run of the configuration file.
Currently, the configuration is organized into four sections:
db Options relating to the font index.
misc Options without a clearly defined category.
paths Path and file name settings.
run Options controlling runtime behavior of Luaotfload.
The list of valid variables, the sections they are part of and their type is given below.
Types represent Lua types that the values must be convertible to; they are abbreviated as
follows: s for the string type, n for number, b for boolean. A value of nil means the
variable is unset.
Section db
┌─────────────────┬──────┬───────────────┐
│variable │ type │ default │
├─────────────────┼──────┼───────────────┤
│compress │ b │ true │
├─────────────────┼──────┼───────────────┤
│designsize-dimen │ b │ bp │
├─────────────────┼──────┼───────────────┤
│formats │ s │ "otf,ttf,ttc" │
├─────────────────┼──────┼───────────────┤
│max-fonts │ n │ 2^51 │
├─────────────────┼──────┼───────────────┤
│scan-local │ b │ false │
├─────────────────┼──────┼───────────────┤
│skip-read │ b │ false │
├─────────────────┼──────┼───────────────┤
│strip │ b │ true │
├─────────────────┼──────┼───────────────┤
│update-live │ b │ true │
└─────────────────┴──────┴───────────────┘
The flag compress determines whether the font index (usually luaotfload-names.lua[.gz]
will be stored in compressed forms. If unset it is equivalent of passing --no-compress to
luaotfload-tool. Since the file is only created for convenience and has no effect on the
runtime behavior of Luaotfload, the flag should remain set. Most editors come with zlib
support anyways.
The setting designsize-dimen applies when looking up fonts from families with design
sizes. In Opentype, these are specified as “decipoints” where one decipoint equals ten DTP
style “big points”. When indexing fonts these values are converted to sp. In order to
treat the values as though they were specified in TeX points or Didot points, set
designsize-dimen to pt or dd.
The list of formats must be a comma separated sequence of strings containing one or more
of these elements:
• otf (OpenType format),
• ttf and ttc (TrueType format),
• afm (Adobe Font Metrics),
It corresponds loosely to the --formats option to luaotfload-tool. Invalid or duplicate
members are ignored; if the list does not contain any useful identifiers, the default list
"otf,ttf,ttc" will be used.
The variable max-fonts determines after processing how many font files the font scanner
will terminate the search. This is useful for debugging issues with the font index and has
the same effect as the option --max-fonts to luaotfload-tools.
The scan-local flag, if set, will incorporate the current working directory as a font
search location. NB: This will potentially slow down document processing because a font
index with local fonts will not be saved to disk, so these fonts will have to be
re-indexed whenever the document is built.
The skip-read flag is only useful for debugging: It makes Luaotfload skip reading fonts.
The font information for rebuilding the index is taken from the presently existing one.
Unsetting the strip flag prevents Luaotfload from removing data from the index that is
only useful when processing font files. NB: this can increase the size of the index files
significantly and has no effect on the runtime behavior.
If update-live is set, Luaotfload will reload the database if it cannot find a requested
font. Those who prefer to update manually using luaotfload-tool should unset this flag.
This option does not affect rebuilds due to version mismatch.
Section default-features
By default Luaotfload enables node mode and picks the default font features that are
prescribed in the OpenType standard. This behavior may be overridden in the
default-features section. Global defaults that will be applied for all scripts can be set
via the global option, others by the script they are to be applied to. For example, a
setting of
[default-features]
global = mode=base,color=0000FF
dflt = smcp,onum
would force base mode, tint all fonts blue and activate small capitals and text figures
globally. Features are specified as a comma separated list of variables or variable-value
pairs. Variables without an explicit value are set to true.
Section misc
┌───────────┬──────┬──────────────────────┐
│variable │ type │ default │
├───────────┼──────┼──────────────────────┤
│statistics │ b │ false │
├───────────┼──────┼──────────────────────┤
│termwidth │ n │ nil │
├───────────┼──────┼──────────────────────┤
│version │ s │ <Luaotfload version> │
├───────────┼──────┼──────────────────────┤
│keepnames │ b │ true │
└───────────┴──────┴──────────────────────┘
With statistics enabled, extra statistics will be collected during index creation and
appended to the index file. It may then be queried at the Lua end or inspected by reading
the file itself.
The value of termwidth, if set, overrides the value retrieved by querying the properties
of the terminal in which Luatex runs. This is useful if the engine runs with shell_escape
disabled and the actual terminal dimensions cannot be retrieved.
The value of version is derived from the version string hard-coded in the Luaotfload
source. Override at your own risk.
The keepnames option decides if the ConTeXt fontloader should keep names it considers
useless or if they should be discarded. This option only takes effect after font caches
are regenererated.
Section paths
┌─────────────┬──────┬───────────────────────────────┐
│variable │ type │ default │
├─────────────┼──────┼───────────────────────────────┤
│cache-dir │ s │ "fonts" │
├─────────────┼──────┼───────────────────────────────┤
│names-dir │ s │ "names" │
├─────────────┼──────┼───────────────────────────────┤
│index-file │ s │ "luaotfload-names.lua" │
├─────────────┼──────┼───────────────────────────────┤
│lookups-file │ s │ "luaotfload-lookup-cache.lua" │
└─────────────┴──────┴───────────────────────────────┘
The paths cache-dir and names-dir determine the subdirectory inside the Luaotfload subtree
of the luatex-cache directory where the font cache and the font index will be stored,
respectively.
Inside the index directory, the names of the index file and the font lookup cache will be
derived from the respective values of index-file and lookups-file. This is the filename
base for the bytecode compiled version as well as -- for the index -- the gzipped version.
Section run
┌───────────────┬──────┬─────────────────────────┐
│variable │ type │ default │
├───────────────┼──────┼─────────────────────────┤
│anon-sequence │ s │ "tex,path,name" │
├───────────────┼──────┼─────────────────────────┤
│color-callback │ s │ "post_linebreak_filter" │
├───────────────┼──────┼─────────────────────────┤
│definer │ s │ "patch" │
├───────────────┼──────┼─────────────────────────┤
│log-level │ n │ 0 │
├───────────────┼──────┼─────────────────────────┤
│resolver │ s │ "cached" │
├───────────────┼──────┼─────────────────────────┤
│fontloader │ s │ "default" │
└───────────────┴──────┴─────────────────────────┘
Unqualified font lookups are treated with the flexible “anonymous” mechanism. This
involves a chain of lookups applied successively until the first one yields a match. By
default, the lookup will first search for TFM fonts using the Kpathsea library. If this
wasn’t successful, an attempt is made at interpreting the request as an absolute path
(like the [/path/to/font/foo.ttf] syntax) or a file name (file:foo.ttf). Finally, the
request is interpreted as a font name and retrieved from the index (name:Foo Regular).
This behavior can be configured by specifying a list as the value to anon-sequence.
Available items are tex, path, name -- representing the lookups described above,
respectively --, and file for searching a filename but not an absolute path. Also, my
lookups are valid values but they should only be used from within TeX documents, because
there is no means of customizing a my lookups on the command line.
The color-callback option determines the stage at which fonts that defined with a
color=xxyyzz feature will be colorized. By default this happens in a post_linebreak_filter
but alternatively the pre_linebreak_filter or pre_output_filter may be chosen, which is
faster but might produce inconsistent output. The pre_output_filter used to be the default
in the 1.x series of Luaotfload, whilst later versions up to and including 2.5 hooked into
the pre_linebreak_filter which naturally didn’t affect any glyphs inserting during
hyphenation. Both are kept around as options to restore the previous behavior if
necessary.
The definer allows for switching the define_font callback. Apart from the default patch
one may also choose the generic one that comes with the vanilla fontloader. Beware that
this might break tools like Fontspec that rely on the patch_font callback provided by
Luaotfload to perform important corrections on font data.
The fontloader backend can be selected by setting the value of fontloader. The most
important choices are default, which will load the dedicated Luaotfload fontloader, and
reference, the upstream package as shipped with Luaotfload. Other than those, a file name
accessible via kpathsea can be specified.
Alternatively, the individual files that constitute the fontloader can be loaded directly.
While less efficient, this greatly aids debugging since error messages will reference the
actual line numbers of the source files and explanatory comments are not stripped.
Currently, three distinct loading strategies are available: unpackaged will load the batch
that is part of Luaotfload. These contain the identical source code that the reference
fontloader has been compiled from. Another option, context will attempt to load the same
files by their names in the Context format from the search path. Consequently this option
allows to use the version of Context that comes with the TeX distribution. Distros tend to
prefer the stable version (“current” in Context jargon) of those files so certain bugs
encountered in the more bleeding edge Luaotfload can be avoided this way. A third option
is to use context with a colon to specify a directory prefix where the TEXMF is located
that the files should be loaded from, e. g. context:~/context/tex/texmf-context. This can
be used when referencing another distribution like the Context minimals that is installed
under a different path not indexed by kpathsea.
The value of log-level sets the default verbosity of messages printed by Luaotfload. Only
messages defined with a verbosity of less than or equal to the supplied value will be
output on the terminal. At a log level of five Luaotfload can be very noisy. Also,
printing too many messages will slow down the interpreter due to line buffering being
disabled (see setbuf(3)).
The resolver setting allows choosing the font name resolution function: With the default
value cached Luaotfload saves the result of a successful font name request to a cache file
to speed up subsequent lookups. The alternative, normal circumvents the cache and resolves
every request individually. (Since to the restructuring of the font name index in
Luaotfload 2.4 the performance difference between the cached and uncached lookups should
be marginal.)
FILES
Luaotfload only processes the first configuration file it encounters at one of the search
locations. The file name may be either luaotfload.conf or luaotfloadrc, except for the
dotfile in the user’s home directory which is expected at ~/.luaotfloadrc.
Configuration files are located following a series of steps. The search terminates as soon
as a suitable file is encountered. The sequence of locations that Luaotfload looks at is
i. The current working directory of the LuaTeX process.
ii. The subdirectory luaotfload/ inside the XDG configuration tree, e. g.
/home/oenothea/config/luaotfload/.
iii. The dotfile.
iv. The TEXMF (using kpathsea).
SEE ALSO
luaotfload-tool(1), luatex(1), lua(1)
• texdoc luaotfload to display the PDF manual for the Luaotfload package
• Luaotfload development https://github.com/latex3/luaotfload
• LuaLaTeX mailing list http://tug.org/pipermail/lualatex-dev/
• LuaTeX http://luatex.org/
• Luaotfload on CTAN http://ctan.org/pkg/luaotfload
REFERENCES
• The XDG base specification
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html.
AUTHORS
Luaotfload was developed by the LuaLaTeX dev team (https://github.com/lualatex/). It is
currently maintained by the LaTeX Project Team at https://github.com/latex3/luaotfload
This manual page was written by Philipp Gesang <phg@phi-gamma.net>.
COPYRIGHT
GPL v2.0