Provided by: systemd_252.5-2ubuntu3_amd64 
NAME
org.freedesktop.import1 - The D-Bus interface of systemd-importd
INTRODUCTION
systemd-importd.service(8) is a system service which may be used to import, export and
download additional system images. These images can be used by tools such as systemd-
nspawn(1) to run local containers. The service is used as the backend for machinectl
pull-raw, machinectl pull-tar and related commands. This page describes the D-Bus
interface.
Note that systemd-importd.service(8) is mostly a small companion service for systemd-
machined.service(8). Many operations to manipulate local container and VM images are hence
available via the systemd-machined D-Bus API, c.f. org.freedesktop.machine1(5).
THE MANAGER OBJECT
The service exposes the following interfaces on the Manager object on the bus:
node /org/freedesktop/import1 {
interface org.freedesktop.import1.Manager {
methods:
ImportTar(in h fd,
in s local_name,
in b force,
in b read_only,
out u transfer_id,
out o transfer_path);
ImportRaw(in h fd,
in s local_name,
in b force,
in b read_only,
out u transfer_id,
out o transfer_path);
ImportFileSystem(in h fd,
in s local_name,
in b force,
in b read_only,
out u transfer_id,
out o transfer_path);
ExportTar(in s local_name,
in h fd,
in s format,
out u transfer_id,
out o transfer_path);
ExportRaw(in s local_name,
in h fd,
in s format,
out u transfer_id,
out o transfer_path);
PullTar(in s url,
in s local_name,
in s verify_mode,
in b force,
out u transfer_id,
out o transfer_path);
PullRaw(in s url,
in s local_name,
in s verify_mode,
in b force,
out u transfer_id,
out o transfer_path);
ListTransfers(out a(usssdo) transfers);
CancelTransfer(in u transfer_id);
signals:
TransferNew(u transfer_id,
o transfer_path);
TransferRemoved(u transfer_id,
o transfer_path,
s result);
};
interface org.freedesktop.DBus.Peer { ... };
interface org.freedesktop.DBus.Introspectable { ... };
interface org.freedesktop.DBus.Properties { ... };
};
Methods
ImportTar() and ImportRaw() import a system image and place it into /var/lib/machines/.
The first argument should be a file descriptor (opened for reading) referring to the tar
or raw file to import. It should reference a file on disk, a pipe or a socket. When
ImportTar() is used the file descriptor should refer to a tar file, optionally compressed
with gzip(1), bzip2(1), or xz(1). systemd-importd will detect the used compression scheme
(if any) automatically. When ImportRaw() is used the file descriptor should refer to a raw
or qcow2 disk image containing an MBR or GPT disk label, also optionally compressed with
gzip, bzip2 or xz. In either case, if the file is specified as a file descriptor on disk,
progress information is generated for the import operation (as in that case we know the
total size on disk). If a socket or pipe is specified, progress information is not
available. The file descriptor argument is followed by a local name for the image. This
should be a name suitable as a hostname and will be used to name the imported image below
/var/lib/machines/. A tar import is placed as a directory tree or a btrfs(8) subvolume
below /var/lib/machines/ under the specified name with no suffix appended. A raw import is
placed as a file in /var/lib/machines/ with the .raw suffix appended. If the force
argument is true, any pre-existing image with the same name is removed before starting the
operation. Otherwise, the operation fails if an image with the same name already exists.
Finally, the read_only argument controls whether to create a writable or read-only image.
Both methods return immediately after starting the import, with the import transfer
ongoing. They return a pair of transfer identifier and object path, which may be used to
retrieve progress information about the transfer or to cancel it. The transfer identifier
is a simple numeric identifier, the object path references an
org.freedesktop.import1.Transfer object, see below. Listen for a TransferRemoved signal
for the transfer ID in order to detect when a transfer is complete. The returned transfer
object is useful to determine the current progress or log output of the ongoing import
operation.
ExportTar() and ExportRaw() implement the reverse operation, and may be used to export a
system image in order to place it in a tar or raw image. They take the machine name to
export as their first parameter, followed by a file descriptor (opened for writing) where
the tar or raw file will be written. It may either reference a file on disk or a
pipe/socket. The third argument specifies in which compression format to write the image.
It takes one of "uncompressed", "xz", "bzip2" or "gzip", depending on which compression
scheme is required. The image written to the specified file descriptor will be a tar file
in case of ExportTar() or a raw disk image in case of ExportRaw(). Note that currently raw
disk images may not be exported as tar files, and vice versa. This restriction might be
lifted eventually. The method returns a transfer identifier and object path for cancelling
or tracking the export operation, similarly to ImportTar() or ImportRaw() as described
above.
PullTar() and PullRaw() may be used to download, verify and import a system image from a
URL. They take an URL argument which should point to a tar or raw file on the "http://" or
"https://" protocols, possibly compressed with xz, bzip2 or gzip. The second argument is a
local name for the image. It should be suitable as a hostname, similarly to the matching
argument of the ImportTar() and ImportRaw() methods above. The third argument indicates
the verification mode for the image. It may be one of "no", "checksum", "signature". "no"
turns off any kind of verification of the image; "checksum" looks for a SHA256SUM file
next to the downloaded image and verifies any SHA256 hash value in that file against the
image; "signature" does the same but also tries to authenticate the SHA256SUM file via
gpg(8) first. The last argument indicates whether to replace a possibly pre-existing image
with the same local name (if "true"), or whether to fail (if "false"). Like the import and
export calls above, these calls return a pair of transfer identifier and object path for
the ongoing download.
ListTransfers() returns a list of ongoing import, export or download operations as created
with the six calls described above. It returns an array of structures which consist of the
numeric transfer identifier, a string indicating the operation (one of "import-tar",
"import-raw", "export-tar", "export-raw", "pull-tar" or "pull-raw"), a string describing
the remote file (in case of download operations this is the source URL, in case of
import/export operations this is a short string describing the file descriptor passed in),
a string with the local machine image name, a progress value between 0.0 (for 0%) and 1.0
(for 100%), as well as the transfer object path.
CancelTransfer() may be used to cancel an ongoing import, export or download operation.
Simply specify the transfer identifier to cancel the ongoing operation.
Signals
The TransferNew signal is generated each time a new transfer is started with the import,
export or download calls described above. It carries the transfer ID and object path that
have just been created.
The TransferRemoved signal is sent each time a transfer finishes, is canceled or fails. It
also carries the transfer ID and object path, followed by a string indicating the result
of the operation, which is one of "done" (on success), "canceled" or "failed".
THE TRANSFER OBJECT
node /org/freedesktop/import1/transfer/_1 {
interface org.freedesktop.import1.Transfer {
methods:
Cancel();
signals:
LogMessage(u priority,
s line);
properties:
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly u Id = ...;
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Local = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Remote = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Type = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Verify = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly d Progress = ...;
};
interface org.freedesktop.DBus.Peer { ... };
interface org.freedesktop.DBus.Introspectable { ... };
interface org.freedesktop.DBus.Properties { ... };
};
Methods
The Cancel() method may be used to cancel the transfer. It takes no parameters. This
method is pretty much equivalent to the CancelTransfer() method on the Manager interface
(see above), but is exposed on the Transfer object itself instead of taking a transfer ID.
Properties
The Id property exposes the numeric transfer ID of the transfer object.
The Local, Remote and Type properties expose the local container name of this transfer,
the remote source (in case of download: the URL, in case of import/export: a string
describing the file descriptor passed in), and the type of operation (see the Manager's
ListTransfer() method above for an explanation of the possible values).
The Verify property exposes the selected verification setting and is only defined for
download operations (see above).
The Progress property exposes the current progress of the transfer as a value between 0.0
and 1.0. To show a progress bar on screen we recommend to query this value in regular
intervals, for example every 500 ms or so.
EXAMPLES
Example 1. Introspect org.freedesktop.import1.Manager on the bus
$ gdbus introspect --system \
--dest org.freedesktop.import1 \
--object-path /org/freedesktop/import1
Example 2. Introspect org.freedesktop.import1.Transfer on the bus
$ gdbus introspect --system \
--dest org.freedesktop.import1 \
--object-path /org/freedesktop/import1/transfer/_1
VERSIONING
These D-Bus interfaces follow the usual interface versioning guidelines[1].
NOTES
1. the usual interface versioning guidelines
http://0pointer.de/blog/projects/versioning-dbus.html