Provided by: udhcpd_1.35.0-4ubuntu1_amd64 bug

NAME

       udhcpd.conf - udhcp server configuration file

DESCRIPTION

       The file /etc/udhcpd.conf contains configuration information specific to the udhcp server.
       It  should  contain  one  configuration  keyword  per  line,   followed   by   appropriate
       configuration information.

OPTIONS

       start ADDRESS
              The   starting  address  of  the  IP  lease  block  is  ADDRESS.   The  default  is
              192.168.0.20.

       end ADDRESS
              The ending address of the IP lease block is ADDRESS.  The default is 192.168.0.254.

       interface INTERFACE
              The udhcp server should listen on INTERFACE.  The default is eth0.

       max_leases LEASES
              Offer at most LEASES leases (including those reserved by OFFERs, DECLINEs, and  ARP
              conflicts).  The default is 254.

       remaining REMAINING
              If  REMAINING  is yes, store the time remaining for each lease.  If it is no, store
              the expiration time for each lease.  The default is yes.

       auto_time SECONDS
              Write the lease information to a file every SECONDS seconds.  The default is 7200.

       decline_time SECONDS
              Reserve an IP for SECONDS seconds if a  DHCP  decline  message  is  received.   The
              default is 3600.

       conflict_time SECONDS
              Reserve an IP for SECONDS seconds if an ARP conflict occurs.  The default is 3600.

       offer_time SECONDS
              Reserve an IP for SECONDS seconds if it is offered.  The default is 60.

       min_lease SECONDS
              Reserve an IP for the full lease time if the lease to be given is less than SECONDS
              seconds.  The default is 60.

       lease_file FILE
              Write the lease information to FILE.  The default is /var/lib/misc/udhcpd.leases.

       pidfile FILE
              Write the process ID to FILE.  The default is /var/run/udhcpd.pid.

       notify_file FILE
              Execute FILE after the lease information  is  written.   By  default,  no  file  is
              executed.

       siaddr ADDRESS
              BOOTP specific option.  The default is 0.0.0.0.

       sname NAME
              BOOTP specific option.  There is no default.

       boot_file FILE
              BOOTP specific option.  There is no default.

       static_lease MACADDRESS IPADDRESS
              Issue IPADDRESS statically to a requester with MACADDRESS.

       option OPTION
              DHCP specific option.

              subnet ADDRESS

              timezone OFFSET

              router ADDRESS...

              timesvr ADDRESS...

              namesvr ADDRESS...

              dns ADDRESS...

              logsvr ADDRESS...

              cookiesvr ADDRESS...

              lprsvr ADDRESS...

              hostname HOSTNAME

              bootsize SIZE

              domain DOMAIN

              swapsvr ADDRESS

              rootpath PATH

              ipttl TTL

              mtu MTU

              broadcast ADDRESS

              ntpsrv ADDRESS...

              wins ADDRESS...

              requestip ADDRESS

              lease SECONDS

              dhcptype TYPE

              serverid ADDRESS

              tftp FILE

              wpad URL

              bootfile FILE
                     The  default  for  lease  is  864000.   There  are no defaults for the other
                     options.

SEE ALSO

       udhcpd(8).