Provided by: tigervnc-common_1.12.0+dfsg-8_amd64 
NAME
tigervnc.conf - configuration files for Virtual Network Computing
SYNOPSIS
$variable = "someValue";
$variable = "someValue";
$variable .= "someValue";
$variable = $var1 . $var2;
DESCRIPTION
This man page describes the syntax and options of the three configuration files loaded by
tigervncserver(1), the free X server for Virtual Network Computing (VNC). These
configuration files can be used to change the behavior of the server at startup time,
although for all values suitable inbuilt defaults are preset.
First, /etc/tigervnc/vncserver-config-defaults is read specifying the system defaults.
Then, tigervncserver(1) will proceed and read $HOME/.vnc/tigervnc.conf, a file that can be
changed on a per-user base. The options in this file will override the system defaults.
Next, command-line options overwrite both the system defaults and the settings in
$HOME/.vnc/tigervnc.conf. Finally, the configuration file /etc/tigervnc/vncserver-config-
mandatory is parsed. If this file exists and defines options to be passed to Xtigervnc,
they will override any of the same options defined in a user's $HOME/.vnc/tigervnc.conf as
well as options given via the command line. This file offers a mechanism to establish
some basic form of system-wide policy.
WARNING! There is nothing stopping users from constructing their own start script that
calls Xtigervnc directly to bypass any options defined in /etc/tigervnc/vncserver-config-
mandatory.
EXAMPLES
The system configuration file /etc/tigervnc/vncserver-config-defaults should come with the
Debian package tigervnc-standalone-server. This file serves as an example for the user
file $HOME/.vnc/tigervnc.conf. The system configuration file is pretty self-descriptive,
and this document will mainly repeat the information that already can be found there.
OVERVIEW
The file is in perl(1) syntax, although only variable assignment is allowed for your
safety and convenience. But there still a variety of possibilities to set the string
variables.
All variable names are prefixed by `$'. You can assign a string to a variable using the
`=' operator, and you can append a string to a variable using the `.=' operator. You can
concatenate two strings using the `.' operator. You can substitute variables even inside
quotes. You can access the environment variables using the notation $ENV{VARIABLE}.
You can unset a variable by assigning undef to it. Use this to return the state of the
variable from `set' to `use default'.
You must end a line with a semicolon.
OPTIONS
The options are given with their default value if this is known.
$fontPath = "<font_dir>,<font_dir>,..."
Should be a comma separated list of fonts to be added to the font path. If not
specified, the default will apply.
$PAMService = "tigervnc";
This parameter specifies the PAM service used for plain password authentication if
one of the security types Plain, TLSPlain, or X509Plain is used. If /etc/pam.d/vnc
is not present, then tigervncserver(1) expects to use the tigervnc PAM service to
authenticate the passwords of users when any of the *Plain security types are used.
Note that the tigervnc-common package provides the PAM service configuration file
/etc/pam.d/tigervnc. Otherwise, if /etc/pam.d/vnc is present, then the vnc PAM
service will be used.
$sslAutoGenCertCommand = "openssl req
-newkey ec:/etc/tigervnc/openssl-ecparams.pem
-x509 -days 2190 -nodes";
The command specified by the $sslAutoGenCertCommand parameter is used to auto
generate the certificate for the -X509Cert and -X509Key options of Xtigervnc(1).
The configuration for openssl(1SSL) is taken from /etc/tigervnc/openssl.cnf where
we substitute @HostName@ by the fully qualified domain name of the host.
$vncUserDir = "$ENV{HOME}/.vnc";
Contains the filename for the log files directory of Xtigervnc (the server) and the
viewers that are connected to it.
$vncPasswdFile = $vncUserDir . "/passwd";
Contains the filename of the password file for Xtigervnc. This file is only used
for the security types VncAuth, TLSVnc, and X509Vnc.
$vncStartup = "/etc/X11/Xtigervnc-session";
Points to a script that will be started at the very beginning when neither
$vncUserDir/Xtigervnc-session nor $vncUserDir/xstartup is present. If
$vncUserDir/Xtigervnc-session is present, it will be used. Otherwise, we try
$vncUserDir/xstartup. If this is also absent, then we use the $vncStartup script.
If $vncStartup is specified in $vncUserDir/tigervnc.conf, then this script is used
unconditionally. That is without checking for the presence of
$vncUserDir/Xtigervnc-session or $vncUserDir/xstartup.
$session = undef;
This option can be used to control which X session type will be started. This
should match one of the files in /usr/share/xsessions. For example, if there is a
file called gnome.desktop, then $session = "gnome" would start this X session. The
command to start the session is passed to the $vncStartup script. If this is not
specified, then /etc/X11/Xtigervnc-session will start the session specified by
/usr/bin/x-session-manager.
$xauthorityFile = "$ENV{HOME}/.Xauthority";
Specifies the path to the X authority file that should be used by your Xtigervnc
server.
$desktopName = "${HOSTFQDN}:nn ($ENV{LOGNAME})";
Should be set to the default name of the desktop. This can be changed at the
command line with -desktop.
$geometry = "<width>x<height>";
This sets the framebuffer width & height to be used by the Xtigervnc server. On
default, 1920x1200 is used. A values for this option as well as the $depth and
$pixelformat options can be derived if the tigervncserver(1) is run in a X session
– either $ENV{DISPLAY} or the session given by $getDefaultFrom – with the
-xdisplaydefaults option. The geometry can also be changed at the commandline with
the -geometry option. Otherwise, the fixed defaults given here as well as in the
following two configuration parameter documentations will be used.
$depth = "32";
This sets the framebuffer color depth, i.e., the number of bits per pixel to use.
It must be either 16, 24, or 32.
$pixelformat = "rgb888";
Specifies the pixel format for the Xtigervnc(1) server to use (BGRnnn or RGBnnn).
The default for depth 16 is RGB565 (meaning the most significant five bits
represent red, the next six green, and the least significant five represent blue)
and for depth 24 and 32 is RGB888.
$wmDecoration = "8x64";
Sets the adjustment of $geometry to accommodate the window decoration used by the
X11 window manager. This is used to fully display the VNC desktop even if the VNC
viewer is not in full screen mode.
$getDefaultFrom
This option lets you set the display from which you can query the default of the
above three options, if you don't want to start tigervncserver from within a
running X server. It will be added to the call of xdpyinfo. It is useful to get the
default from the X server you will run xtigervncviewer in, because the data has not
to be recalculated then.
$getDefaultFrom = "-display localhost:0"; is an example how to do this.
$scrapingGeometry = "<width>x<height>+<xoffset>+<yoffset>";
is only used by the scraping TigerVNC server. It specifies the screen area that
will be shown to VNC clients, e.g., 640x480+320+240. The format is
<width>x<height>+<xoffset>+<yoffset>, where `+' signs can be replaced with `-'
signs to specify offsets from the right and/or from the bottom of the screen.
Offsets are optional, +0+0 is assumed by default (top left corner). If the variable
is not defined, full screen is shown to VNC clients (this is the default).
$localhost = "yes";
Should the TigerVNC server only listen on localhost for incoming TigerVNC
connections. This is useful if you use SSH and want to stop non-SSH connections
from any other hosts. Hence, $localhost = "yes" is the default if security types
are not specified. In this case, only the security type VncAuth will be offered. If
the security types are specified, either via the option -SecurityTypes given to
tigervncserver(1) or via the $SecurityTypes configuration parameter in
/etc/tigervnc/vncserver-config-defaults or in $HOME/.vnc/tigervnc.conf, then the
default depends on the specified security types. The default will be
$localhost = "no" if the specified security types contain at least one of the TLS*
or X509* secutity types and also contain none of the *None security types. As
always, the defaults can be overwritten on the commandline via the -localhost
option or via the $localhost configuration parameter in /etc/tigervnc/vncserver-
config-defaults or in $HOME/.vnc/tigervnc.conf.
$SecurityTypes = "VncAuth"
The $SecurityTypes parameter contains a comma separated list of the default
security types the Xtigervnc server will offer. Available security types are None,
VncAuth, Plain, TLSNone, TLSVnc, TLSPlain, X509None, X509Vnc and X509Plain. The
*None security types do not offer any kind of user authentication for connecting
VNC sessions. Hence, combining a *None security type and $localhost = "no" is a
very bad idea. The TLS* and X509* security types do enforce SSL encryption for data
transmission. Hence, combining a TLS* or X509* security type and $localhost = "yes"
is a senseless idea. Thus, in the case of $localhost = "no", the default for
$SecurityTypes will be extended from VncAuth to VncAuth,TLSVnc.
$PlainUsers = "$ENV{LOGNAME}"
The $PlainUsers configuration parameter contains a comma separated list of users
that are authorized to access the VNC server if the security types Plain, TLSPlain,
or X509Plain are used to establish the connection. The password for these users are
check by the system via the PAM service specified via the $PAMService configuration
variable or the -PAMService option. On default, only the user starting the
tigervncserver is contained in the list. By specifying *, any user can authenticate
using this security type.
$X509Cert and $X509Key
These two options contain the filenames for a certificate and its key that is used
for the security types X509None, X509Vnc, and X509Plain. If nothing is specified –
the default case – then a self-signed certificate is auto-generated by
tigervncserver(1) and stored in $HOME/.vnc/${HOSTFQDN}-SrvCert.pem and
$HOME/.vnc/${HOSTFQDN}-SrvKey.pem, respectively. If filenames are given for
$X509Cert and $X509Key either here or on the commandline via -X509Cert and -X509Key
options, then the auto generation is disabled and the user has to take care that
usable certificates are present.
FILES
/etc/tigervnc/vncserver-config-defaults
The global configuration file specifying the defaults for tigervncserver and
x0tigervncserver.
~/.vnc/tigervnc.conf
The user's tigervnc.conf configuration file. To be compatible with the upstream
provided wrapper scripts, we will fall back to trying to load configuration from
~/.vnc/config if tigervnc.conf is not present. Note that ~/.vnc/config uses
key=value lines as configuration syntax.
/etc/tigervnc/vncserver-config-mandatory
If this file exists and defines options, they will override any of the same options
defined in a user's tigervnc.conf file or ones given on the command line of the
wrapper scripts tigervncserver and x0tigervncserver. This file offers a mechanism
to establish some basic form of system-wide policy.
WARNING! There is nothing stopping users from constructing their own wrapper script
that calls Xtigervnc or X0tigervnc directly to bypass any options defined in the
/etc/tigervnc/vncserver-config-mandatory configuration file.
SEE ALSO
tigervncconfig(1), tigervncpasswd(1), tigervncserver(1), tigervncsession(8),
x0tigervncserver(1), Xtigervnc(1), X0tigervnc(1), xtigervncviewer(1)
AUTHOR
2022 - Modified for TigerVNC 1.12.0 by Joachim Falk (Joachim.Falk@gmx.de) 2021 - Modified
for TigerVNC 1.11.0 by Joachim Falk (Joachim.Falk@gmx.de) 2016 - Modified for TigerVNC 1.7
by Joachim Falk (Joachim.Falk@gmx.de) 2006 - Modified for vnc 4.1.2 by Joachim Falk
(Joachim.Falk@gmx.de) 1998 - Originally written by Marcus Brinkmann
(Marcus.Brinkmann@ruhr-uni-bochum.de) for the Debian GNU/Linux Distribution.