Provided by: manpages_6.03-1_all bug

NAME

       cgroups - Linux control groups

DESCRIPTION

       Control  groups,  usually  referred  to as cgroups, are a Linux kernel feature which allow
       processes to be organized into  hierarchical  groups  whose  usage  of  various  types  of
       resources  can  then  be limited and monitored.  The kernel's cgroup interface is provided
       through a pseudo-filesystem called cgroupfs.  Grouping is implemented in the  core  cgroup
       kernel  code, while resource tracking and limits are implemented in a set of per-resource-
       type subsystems (memory, CPU, and so on).

   Terminology
       A cgroup is a collection of processes that are bound to a  set  of  limits  or  parameters
       defined via the cgroup filesystem.

       A subsystem is a kernel component that modifies the behavior of the processes in a cgroup.
       Various subsystems have been implemented, making it possible to do things such as limiting
       the  amount of CPU time and memory available to a cgroup, accounting for the CPU time used
       by a cgroup, and freezing and resuming execution of the processes in a cgroup.  Subsystems
       are sometimes also known as resource controllers (or simply, controllers).

       The  cgroups  for  a controller are arranged in a hierarchy.  This hierarchy is defined by
       creating, removing, and renaming subdirectories within the  cgroup  filesystem.   At  each
       level  of  the  hierarchy, attributes (e.g., limits) can be defined.  The limits, control,
       and accounting provided by cgroups  generally  have  effect  throughout  the  subhierarchy
       underneath  the  cgroup  where  the attributes are defined.  Thus, for example, the limits
       placed on a cgroup at a higher level in the hierarchy cannot  be  exceeded  by  descendant
       cgroups.

   Cgroups version 1 and version 2
       The initial release of the cgroups implementation was in Linux 2.6.24.  Over time, various
       cgroup controllers have been added to allow the management of various types of  resources.
       However,  the  development of these controllers was largely uncoordinated, with the result
       that  many  inconsistencies  arose  between  controllers  and  management  of  the  cgroup
       hierarchies became rather complex.  A longer description of these problems can be found in
       the     kernel      source      file      Documentation/admin-guide/cgroup-v2.rst      (or
       Documentation/cgroup-v2.txt in Linux 4.17 and earlier).

       Because  of  the  problems  with  the  initial cgroups implementation (cgroups version 1),
       starting in Linux 3.10, work began on a new, orthogonal  implementation  to  remedy  these
       problems.   Initially marked experimental, and hidden behind the -o __DEVEL__sane_behavior
       mount option, the new version (cgroups version 2) was eventually made  official  with  the
       release  of  Linux  4.5.   Differences  between the two versions are described in the text
       below.  The file cgroup.sane_behavior, present in cgroups v1, is a  relic  of  this  mount
       option.  The file always reports "0" and is only retained for backward compatibility.

       Although  cgroups  v2  is  intended  as  a  replacement  for  cgroups v1, the older system
       continues to exist (and for compatibility reasons is unlikely to be removed).   Currently,
       cgroups  v2  implements only a subset of the controllers available in cgroups v1.  The two
       systems are implemented so that both v1 controllers and v2 controllers can be  mounted  on
       the  same  system.   Thus,  for  example, it is possible to use those controllers that are
       supported under version 2, while also using version 1 controllers where version 2 does not
       yet  support  those  controllers.  The only restriction here is that a controller can't be
       simultaneously employed in both a cgroups v1 hierarchy and in the cgroups v2 hierarchy.

CGROUPS VERSION 1

       Under cgroups v1, each controller may be mounted against a separate cgroup filesystem that
       provides  its  own  hierarchical  organization of the processes on the system.  It is also
       possible to comount multiple (or even all) cgroups v1 controllers against the same  cgroup
       filesystem,   meaning   that  the  comounted  controllers  manage  the  same  hierarchical
       organization of processes.

       For each mounted hierarchy, the directory tree mirrors the control group hierarchy.   Each
       control  group  is  represented  by  a  directory,  with each of its child control cgroups
       represented as a child directory.  For instance,  /user/joe/1.session  represents  control
       group  1.session,  which  is a child of cgroup joe, which is a child of /user.  Under each
       cgroup directory is a set of files which can be read or written  to,  reflecting  resource
       limits and a few general cgroup properties.

   Tasks (threads) versus processes
       In  cgroups  v1,  a  distinction  is  drawn  between processes and tasks.  In this view, a
       process can consist of multiple tasks (more commonly called  threads,  from  a  user-space
       perspective,  and  called  such  in the remainder of this man page).  In cgroups v1, it is
       possible to independently manipulate the cgroup memberships of the threads in a process.

       The cgroups v1 ability to split threads across different cgroups caused problems  in  some
       cases.   For example, it made no sense for the memory controller, since all of the threads
       of a process share a single address space.  Because of  these  problems,  the  ability  to
       independently manipulate the cgroup memberships of the threads in a process was removed in
       the initial cgroups v2 implementation, and subsequently restored in a  more  limited  form
       (see the discussion of "thread mode" below).

   Mounting v1 controllers
       The  use  of  cgroups requires a kernel built with the CONFIG_CGROUP option.  In addition,
       each of the v1 controllers has an associated configuration option  that  must  be  set  in
       order to employ that controller.

       In  order  to  use  a  v1 controller, it must be mounted against a cgroup filesystem.  The
       usual place for such mounts is under a  tmpfs(5)  filesystem  mounted  at  /sys/fs/cgroup.
       Thus, one might mount the cpu controller as follows:

           mount -t cgroup -o cpu none /sys/fs/cgroup/cpu

       It  is  possible to comount multiple controllers against the same hierarchy.  For example,
       here the cpu and cpuacct controllers are comounted against a single hierarchy:

           mount -t cgroup -o cpu,cpuacct none /sys/fs/cgroup/cpu,cpuacct

       Comounting controllers has the effect that a process is in the same cgroup for all of  the
       comounted  controllers.   Separately mounting controllers allows a process to be in cgroup
       /foo1 for one controller while being in /foo2/foo3 for another.

       It is possible to comount all v1 controllers against the same hierarchy:

           mount -t cgroup -o all cgroup /sys/fs/cgroup

       (One can achieve the same result by omitting -o  all,  since  it  is  the  default  if  no
       controllers are explicitly specified.)

       It  is not possible to mount the same controller against multiple cgroup hierarchies.  For
       example, it is not possible to mount both the cpu  and  cpuacct  controllers  against  one
       hierarchy,  and  to  mount  the  cpu  controller  alone  against another hierarchy.  It is
       possible to create multiple mount with exactly the  same  set  of  comounted  controllers.
       However,  in  this  case all that results is multiple mount points providing a view of the
       same hierarchy.

       Note  that  on  many  systems,  the  v1  controllers  are  automatically   mounted   under
       /sys/fs/cgroup; in particular, systemd(1) automatically creates such mounts.

   Unmounting v1 controllers
       A  mounted  cgroup  filesystem  can  be  unmounted  using the umount(8) command, as in the
       following example:

           umount /sys/fs/cgroup/pids

       But note well: a cgroup filesystem is unmounted only if it is not busy, that is, it has no
       child  cgroups.  If this is not the case, then the only effect of the umount(8) is to make
       the mount invisible.  Thus, to ensure that the mount is really  removed,  one  must  first
       remove  all  child cgroups, which in turn can be done only after all member processes have
       been moved from those cgroups to the root cgroup.

   Cgroups version 1 controllers
       Each of the cgroups version 1 controllers is governed by  a  kernel  configuration  option
       (listed  below).  Additionally, the availability of the cgroups feature is governed by the
       CONFIG_CGROUPS kernel configuration option.

       cpu (since Linux 2.6.24; CONFIG_CGROUP_SCHED)
              Cgroups can be guaranteed a minimum number of "CPU shares" when a system  is  busy.
              This  does  not  limit  a cgroup's CPU usage if the CPUs are not busy.  For further
              information,       see       Documentation/scheduler/sched-design-CFS.rst       (or
              Documentation/scheduler/sched-design-CFS.txt in Linux 5.2 and earlier).

              In  Linux 3.2, this controller was extended to provide CPU "bandwidth" control.  If
              the kernel is configured with CONFIG_CFS_BANDWIDTH,  then  within  each  scheduling
              period  (defined  via  a file in the cgroup directory), it is possible to define an
              upper limit on the CPU time allocated to the processes in  a  cgroup.   This  upper
              limit  applies  even  if  there  is  no  other  competition  for  the CPU.  Further
              information     can     be     found     in     the     kernel     source      file
              Documentation/scheduler/sched-bwc.rst  (or Documentation/scheduler/sched-bwc.txt in
              Linux 5.2 and earlier).

       cpuacct (since Linux 2.6.24; CONFIG_CGROUP_CPUACCT)
              This provides accounting for CPU usage by groups of processes.

              Further   information   can    be    found    in    the    kernel    source    file
              Documentation/admin-guide/cgroup-v1/cpuacct.rst                                 (or
              Documentation/cgroup-v1/cpuacct.txt in Linux 5.2 and earlier).

       cpuset (since Linux 2.6.24; CONFIG_CPUSETS)
              This cgroup can be used to bind the processes in a cgroup to  a  specified  set  of
              CPUs and NUMA nodes.

              Further    information    can    be    found    in    the    kernel   source   file
              Documentation/admin-guide/cgroup-v1/cpusets.rst                                 (or
              Documentation/cgroup-v1/cpusets.txt in Linux 5.2 and earlier).

       memory (since Linux 2.6.25; CONFIG_MEMCG)
              The  memory  controller  supports  reporting and limiting of process memory, kernel
              memory, and swap used by cgroups.

              Further   information   can    be    found    in    the    kernel    source    file
              Documentation/admin-guide/cgroup-v1/memory.rst                                  (or
              Documentation/cgroup-v1/memory.txt in Linux 5.2 and earlier).

       devices (since Linux 2.6.26; CONFIG_CGROUP_DEVICE)
              This supports controlling which processes may create (mknod)  devices  as  well  as
              open them for reading or writing.  The policies may be specified as allow-lists and
              deny-lists.  Hierarchy is enforced, so new rules must not  violate  existing  rules
              for the target or ancestor cgroups.

              Further    information    can    be    found    in    the    kernel   source   file
              Documentation/admin-guide/cgroup-v1/devices.rst                                 (or
              Documentation/cgroup-v1/devices.txt in Linux 5.2 and earlier).

       freezer (since Linux 2.6.28; CONFIG_CGROUP_FREEZER)
              The  freezer  cgroup  can  suspend  and restore (resume) all processes in a cgroup.
              Freezing a cgroup /A also causes its children, for example, processes in  /A/B,  to
              be frozen.

              Further    information    can    be    found    in    the    kernel   source   file
              Documentation/admin-guide/cgroup-v1/freezer-subsystem.rst                       (or
              Documentation/cgroup-v1/freezer-subsystem.txt in Linux 5.2 and earlier).

       net_cls (since Linux 2.6.29; CONFIG_CGROUP_NET_CLASSID)
              This  places  a  classid, specified for the cgroup, on network packets created by a
              cgroup.  These classids can then be used in firewall rules,  as  well  as  used  to
              shape traffic using tc(8).  This applies only to packets leaving the cgroup, not to
              traffic arriving at the cgroup.

              Further   information   can    be    found    in    the    kernel    source    file
              Documentation/admin-guide/cgroup-v1/net_cls.rst                                 (or
              Documentation/cgroup-v1/net_cls.txt in Linux 5.2 and earlier).

       blkio (since Linux 2.6.33; CONFIG_BLK_CGROUP)
              The blkio cgroup controls and limits access to specified block devices by  applying
              IO  control  in  the  form  of  throttling  and upper limits against leaf nodes and
              intermediate nodes in the storage hierarchy.

              Two policies are available.  The first is a proportional-weight time-based division
              of  disk  implemented  with  CFQ.  This is in effect for leaf nodes using CFQ.  The
              second is a throttling policy which specifies upper I/O rate limits on a device.

              Further   information   can    be    found    in    the    kernel    source    file
              Documentation/admin-guide/cgroup-v1/blkio-controller.rst                        (or
              Documentation/cgroup-v1/blkio-controller.txt in Linux 5.2 and earlier).

       perf_event (since Linux 2.6.39; CONFIG_CGROUP_PERF)
              This controller allows perf monitoring of the set of processes grouped in a cgroup.

              Further information can be found in the kernel source files

       net_prio (since Linux 3.3; CONFIG_CGROUP_NET_PRIO)
              This allows priorities to be specified, per network interface, for cgroups.

              Further   information   can    be    found    in    the    kernel    source    file
              Documentation/admin-guide/cgroup-v1/net_prio.rst                                (or
              Documentation/cgroup-v1/net_prio.txt in Linux 5.2 and earlier).

       hugetlb (since Linux 3.5; CONFIG_CGROUP_HUGETLB)
              This supports limiting the use of huge pages by cgroups.

              Further   information   can    be    found    in    the    kernel    source    file
              Documentation/admin-guide/cgroup-v1/hugetlb.rst                                 (or
              Documentation/cgroup-v1/hugetlb.txt in Linux 5.2 and earlier).

       pids (since Linux 4.3; CONFIG_CGROUP_PIDS)
              This controller permits limiting the number of process that may  be  created  in  a
              cgroup (and its descendants).

              Further    information    can    be    found    in    the    kernel   source   file
              Documentation/admin-guide/cgroup-v1/pids.rst  (or  Documentation/cgroup-v1/pids.txt
              in Linux 5.2 and earlier).

       rdma (since Linux 4.11; CONFIG_CGROUP_RDMA)
              The  RDMA  controller  permits  limiting  the use of RDMA/IB-specific resources per
              cgroup.

              Further   information   can    be    found    in    the    kernel    source    file
              Documentation/admin-guide/cgroup-v1/rdma.rst  (or  Documentation/cgroup-v1/rdma.txt
              in Linux 5.2 and earlier).

   Creating cgroups and moving processes
       A cgroup filesystem initially contains a single root  cgroup,  '/',  which  all  processes
       belong to.  A new cgroup is created by creating a directory in the cgroup filesystem:

           mkdir /sys/fs/cgroup/cpu/cg1

       This creates a new empty cgroup.

       A  process  may  be moved to this cgroup by writing its PID into the cgroup's cgroup.procs
       file:

           echo $$ > /sys/fs/cgroup/cpu/cg1/cgroup.procs

       Only one PID at a time should be written to this file.

       Writing the value 0 to a cgroup.procs file causes the writing process to be moved  to  the
       corresponding cgroup.

       When  writing  a  PID into the cgroup.procs, all threads in the process are moved into the
       new cgroup at once.

       Within a hierarchy, a process can be a member of exactly one cgroup.  Writing a  process's
       PID  to  a  cgroup.procs  file  automatically  removes  it from the cgroup of which it was
       previously a member.

       The cgroup.procs file can be read to obtain a list of the processes that are members of  a
       cgroup.  The returned list of PIDs is not guaranteed to be in order.  Nor is it guaranteed
       to be free of duplicates.  (For example, a PID may be  recycled  while  reading  from  the
       list.)

       In  cgroups  v1, an individual thread can be moved to another cgroup by writing its thread
       ID (i.e., the kernel thread ID returned by clone(2) and gettid(2)) to the tasks file in  a
       cgroup  directory.   This file can be read to discover the set of threads that are members
       of the cgroup.

   Removing cgroups
       To remove a cgroup, it must first  have  no  child  cgroups  and  contain  no  (nonzombie)
       processes.  So long as that is the case, one can simply remove the corresponding directory
       pathname.  Note that files in a cgroup directory cannot and need not be removed.

   Cgroups v1 release notification
       Two files can be used to determine whether the kernel provides notifications when a cgroup
       becomes  empty.   A cgroup is considered to be empty when it contains no child cgroups and
       no member processes.

       A special file in the root directory of each cgroup hierarchy, release_agent, can be  used
       to  register  the pathname of a program that may be invoked when a cgroup in the hierarchy
       becomes empty.  The pathname of the newly empty  cgroup  (relative  to  the  cgroup  mount
       point)  is  provided  as  the sole command-line argument when the release_agent program is
       invoked.  The  release_agent  program  might  remove  the  cgroup  directory,  or  perhaps
       repopulate it with a process.

       The  default  value  of  the release_agent file is empty, meaning that no release agent is
       invoked.

       The content of the release_agent file can also be specified via a mount  option  when  the
       cgroup filesystem is mounted:

           mount -o release_agent=pathname ...

       Whether or not the release_agent program is invoked when a particular cgroup becomes empty
       is determined by the value in the  notify_on_release  file  in  the  corresponding  cgroup
       directory.   If  this  file  contains  the  value 0, then the release_agent program is not
       invoked.  If it contains the value 1, the release_agent program is invoked.   The  default
       value  for  this  file in the root cgroup is 0.  At the time when a new cgroup is created,
       the value in this file is inherited from the corresponding file in the parent cgroup.

   Cgroup v1 named hierarchies
       In cgroups v1,  it  is  possible  to  mount  a  cgroup  hierarchy  that  has  no  attached
       controllers:

           mount -t cgroup -o none,name=somename none /some/mount/point

       Multiple  instances  of such hierarchies can be mounted; each hierarchy must have a unique
       name.  The only purpose of such hierarchies is to track processes.  (See the discussion of
       release notification below.)  An example of this is the name=systemd cgroup hierarchy that
       is used by systemd(1) to track services and user sessions.

       Since Linux 5.0, the cgroup_no_v1 kernel boot option (described  below)  can  be  used  to
       disable cgroup v1 named hierarchies, by specifying cgroup_no_v1=named.

CGROUPS VERSION 2

       In  cgroups  v2,  all  mounted  controllers  reside  in a single unified hierarchy.  While
       (different) controllers may be simultaneously mounted under the v1 and v2 hierarchies,  it
       is  not  possible to mount the same controller simultaneously under both the v1 and the v2
       hierarchies.

       The new behaviors in cgroups v2 are summarized here, and in some cases elaborated  in  the
       following subsections.

       •  Cgroups v2 provides a unified hierarchy against which all controllers are mounted.

       •  "Internal"  processes  are  not  permitted.   With  the  exception  of the root cgroup,
          processes may reside only in leaf nodes (cgroups that do not themselves  contain  child
          cgroups).  The details are somewhat more subtle than this, and are described below.

       •  Active   cgroups   must   be   specified   via   the   files   cgroup.controllers   and
          cgroup.subtree_control.

       •  The tasks file has been removed.  In addition, the cgroup.clone_children file  that  is
          employed by the cpuset controller has been removed.

       •  An   improved   mechanism  for  notification  of  empty  cgroups  is  provided  by  the
          cgroup.events file.

       For more changes, see  the  Documentation/admin-guide/cgroup-v2.rst  file  in  the  kernel
       source (or Documentation/cgroup-v2.txt in Linux 4.17 and earlier).

       Some  of  the  new behaviors listed above saw subsequent modification with the addition in
       Linux 4.14 of "thread mode" (described below).

   Cgroups v2 unified hierarchy
       In cgroups v1, the ability to mount different controllers  against  different  hierarchies
       was  intended to allow great flexibility for application design.  In practice, though, the
       flexibility turned out  to  be  less  useful  than  expected,  and  in  many  cases  added
       complexity.   Therefore,  in  cgroups  v2, all available controllers are mounted against a
       single hierarchy.  The available controllers are automatically mounted, meaning that it is
       not  necessary  (or  possible)  to  specify  the  controllers  when mounting the cgroup v2
       filesystem using a command such as the following:

           mount -t cgroup2 none /mnt/cgroup2

       A cgroup v2 controller is available only if it is not currently in use via a mount against
       a  cgroup  v1  hierarchy.  Or, to put things another way, it is not possible to employ the
       same controller against both a v1 hierarchy and the unified v2 hierarchy.  This means that
       it  may  be  necessary  first  to unmount a v1 controller (as described above) before that
       controller is available in v2.  Since systemd(1) makes heavy use of some v1 controllers by
       default,  it  can in some cases be simpler to boot the system with selected v1 controllers
       disabled.  To do this, specify the cgroup_no_v1=list option on  the  kernel  boot  command
       line;  list  is  a comma-separated list of the names of the controllers to disable, or the
       word all to  disable  all  v1  controllers.   (This  situation  is  correctly  handled  by
       systemd(1), which falls back to operating without the specified controllers.)

       Note  that  on many modern systems, systemd(1) automatically mounts the cgroup2 filesystem
       at /sys/fs/cgroup/unified during the boot process.

   Cgroups v2 mount options
       The following options (mount -o) can be specified when mounting the group v2 filesystem:

       nsdelegate (since Linux 4.15)
              Treat cgroup namespaces as delegation boundaries.  For details, see below.

       memory_localevents (since Linux 5.2)
              The memory.events should show statistics only for the cgroup itself,  and  not  for
              any descendant cgroups.  This was the behavior before Linux 5.2.  Starting in Linux
              5.2, the default behavior is  to  include  statistics  for  descendant  cgroups  in
              memory.events,  and this mount option can be used to revert to the legacy behavior.
              This option is system wide and can be set on mount or modified through remount only
              from the initial mount namespace; it is silently ignored in noninitial namespaces.

   Cgroups v2 controllers
       The     following     controllers,     documented    in    the    kernel    source    file
       Documentation/admin-guide/cgroup-v2.rst (or Documentation/cgroup-v2.txt in Linux 4.17  and
       earlier), are supported in cgroups version 2:

       cpu (since Linux 4.15)
              This is the successor to the version 1 cpu and cpuacct controllers.

       cpuset (since Linux 5.0)
              This is the successor of the version 1 cpuset controller.

       freezer (since Linux 5.2)
              This is the successor of the version 1 freezer controller.

       hugetlb (since Linux 5.6)
              This is the successor of the version 1 hugetlb controller.

       io (since Linux 4.5)
              This is the successor of the version 1 blkio controller.

       memory (since Linux 4.5)
              This is the successor of the version 1 memory controller.

       perf_event (since Linux 4.11)
              This is the same as the version 1 perf_event controller.

       pids (since Linux 4.5)
              This is the same as the version 1 pids controller.

       rdma (since Linux 4.11)
              This is the same as the version 1 rdma controller.

       There is no direct equivalent of the net_cls and net_prio controllers from cgroups version
       1.  Instead, support has been added to iptables(8) to allow  eBPF  filters  that  hook  on
       cgroup v2 pathnames to make decisions about network traffic on a per-cgroup basis.

       The v2 devices controller provides no interface files; instead, device control is gated by
       attaching an eBPF (BPF_CGROUP_DEVICE) program to a v2 cgroup.

   Cgroups v2 subtree control
       Each cgroup in the v2 hierarchy contains the following two files:

       cgroup.controllers
              This read-only file exposes a list of the controllers that are  available  in  this
              cgroup.  The contents of this file match the contents of the cgroup.subtree_control
              file in the parent cgroup.

       cgroup.subtree_control
              This is a list of controllers that are active (enabled) in the cgroup.  The set  of
              controllers  in  this file is a subset of the set in the cgroup.controllers of this
              cgroup.  The set of active controllers is modified by writing strings to this  file
              containing  space-delimited  controller  names,  each  preceded by '+' (to enable a
              controller) or '-' (to disable a controller), as in the following example:

                  echo '+pids -memory' > x/y/cgroup.subtree_control

              An attempt to enable a controller that is not present in  cgroup.controllers  leads
              to an ENOENT error when writing to the cgroup.subtree_control file.

       Because   the  list  of  controllers  in  cgroup.subtree_control  is  a  subset  of  those
       cgroup.controllers, a controller that has been disabled in one cgroup in the hierarchy can
       never be re-enabled in the subtree below that cgroup.

       A  cgroup's  cgroup.subtree_control  file  determines  the  set  of  controllers  that are
       exercised in the child cgroups.   When  a  controller  (e.g.,  pids)  is  present  in  the
       cgroup.subtree_control  file  of  a  parent  cgroup,  then  the  corresponding controller-
       interface files (e.g., pids.max) are automatically created in the children of that  cgroup
       and can be used to exert resource control in the child cgroups.

   Cgroups v2 "no internal processes" rule
       Cgroups v2 enforces a so-called "no internal processes" rule.  Roughly speaking, this rule
       means that, with the exception of the root cgroup, processes may reside only in leaf nodes
       (cgroups  that  do  not themselves contain child cgroups).  This avoids the need to decide
       how to partition resources between processes which are members of cgroup A  and  processes
       in child cgroups of A.

       For instance, if cgroup /cg1/cg2 exists, then a process may reside in /cg1/cg2, but not in
       /cg1.  This is to avoid an ambiguity in cgroups v1  with  respect  to  the  delegation  of
       resources  between  processes  in /cg1 and its child cgroups.  The recommended approach in
       cgroups v2 is to create a subdirectory called leaf for any  nonleaf  cgroup  which  should
       contain processes, but no child cgroups.  Thus, processes which previously would have gone
       into /cg1 would now go into /cg1/leaf.  This has the  advantage  of  making  explicit  the
       relationship between processes in /cg1/leaf and /cg1's other children.

       The  "no  internal  processes"  rule  is  in  fact  more  subtle  than stated above.  More
       precisely, the rule is that a (nonroot) cgroup can't both (1) have member  processes,  and
       (2)    distribute    resources    into    child   cgroups—that   is,   have   a   nonempty
       cgroup.subtree_control file.  Thus, it is possible  for  a  cgroup  to  have  both  member
       processes  and  child  cgroups, but before controllers can be enabled for that cgroup, the
       member processes must be moved out of the cgroup (e.g., perhaps into the child cgroups).

       With the Linux 4.14  addition  of  "thread  mode"  (described  below),  the  "no  internal
       processes" rule has been relaxed in some cases.

   Cgroups v2 cgroup.events file
       Each  nonroot  cgroup  in the v2 hierarchy contains a read-only file, cgroup.events, whose
       contents are key-value pairs (delimited by newline characters,  with  the  key  and  value
       separated by spaces) providing state information about the cgroup:

           $ cat mygrp/cgroup.events
           populated 1
           frozen 0

       The following keys may appear in this file:

       populated
              The  value  of  this  key is either 1, if this cgroup or any of its descendants has
              member processes, or otherwise 0.

       frozen (since Linux 5.2)
              The value of this key is 1 if this cgroup is currently frozen, or 0 if it is not.

       The cgroup.events file can be monitored, in order to receive notification when  the  value
       of  one of its keys changes.  Such monitoring can be done using inotify(7), which notifies
       changes as IN_MODIFY events, or poll(2), which notifies changes by returning  the  POLLPRI
       and POLLERR bits in the revents field.

   Cgroup v2 release notification
       Cgroups  v2  provides  a  new  mechanism  for obtaining notification when a cgroup becomes
       empty.  The cgroups v1 release_agent and notify_on_release files are removed, and replaced
       by  the populated key in the cgroup.events file.  This key either has the value 0, meaning
       that the cgroup (and its descendants) contain  no  (nonzombie)  member  processes,  or  1,
       meaning that the cgroup (or one of its descendants) contains member processes.

       The  cgroups  v2  release-notification  mechanism offers the following advantages over the
       cgroups v1 release_agent mechanism:

       •  It allows for cheaper  notification,  since  a  single  process  can  monitor  multiple
          cgroup.events files (using the techniques described earlier).  By contrast, the cgroups
          v1 mechanism requires the expense of creating a process for each notification.

       •  Notification  for  different  cgroup  subhierarchies  can  be  delegated  to  different
          processes.   By contrast, the cgroups v1 mechanism allows only one release agent for an
          entire hierarchy.

   Cgroups v2 cgroup.stat file
       Each cgroup in the v2 hierarchy contains a read-only cgroup.stat file (first introduced in
       Linux  4.14)  that  consists  of  lines  containing  key-value  pairs.  The following keys
       currently appear in this file:

       nr_descendants
              This is the total number of visible (i.e., living)  descendant  cgroups  underneath
              this cgroup.

       nr_dying_descendants
              This  is  the  total  number of dying descendant cgroups underneath this cgroup.  A
              cgroup enters the dying state after being deleted.  It remains in that state for an
              undefined  period  (which  will  depend  on  system load) while resources are freed
              before the cgroup is destroyed.  Note that the presence  of  some  cgroups  in  the
              dying state is normal, and is not indicative of any problem.

              A  process  can't  be  made a member of a dying cgroup, and a dying cgroup can't be
              brought back to life.

   Limiting the number of descendant cgroups
       Each cgroup in the v2 hierarchy contains the following files, which can be  used  to  view
       and set limits on the number of descendant cgroups under that cgroup:

       cgroup.max.depth (since Linux 4.14)
              This  file  defines a limit on the depth of nesting of descendant cgroups.  A value
              of 0 in this file means that no descendant cgroups can be created.  An  attempt  to
              create  a  descendant  whose  nesting level exceeds the limit fails (mkdir(2) fails
              with the error EAGAIN).

              Writing the string "max" to this file means that no limit is imposed.  The  default
              value in this file is "max" .

       cgroup.max.descendants (since Linux 4.14)
              This file defines a limit on the number of live descendant cgroups that this cgroup
              may have.  An attempt to create more descendants than allowed by  the  limit  fails
              (mkdir(2) fails with the error EAGAIN).

              Writing  the string "max" to this file means that no limit is imposed.  The default
              value in this file is "max".

CGROUPS DELEGATION: DELEGATING A HIERARCHY TO A LESS PRIVILEGED USER

       In the context of cgroups, delegation means passing management  of  some  subtree  of  the
       cgroup  hierarchy  to  a  nonprivileged  user.  Cgroups v1 provides support for delegation
       based on file permissions in the cgroup hierarchy but with less strict  containment  rules
       than  v2  (as  noted  below).  Cgroups v2 supports delegation with containment by explicit
       design.  The focus of the discussion in this section is on delegation in cgroups v2,  with
       some differences for cgroups v1 noted along the way.

       Some terminology is required in order to describe delegation.  A delegater is a privileged
       user (i.e., root) who owns a parent cgroup.  A delegatee is a nonprivileged user who  will
       be  granted  the  permissions needed to manage some subhierarchy under that parent cgroup,
       known as the delegated subtree.

       To perform delegation, the delegater makes certain directories and files writable  by  the
       delegatee,  typically  by  changing  the ownership of the objects to be the user ID of the
       delegatee.  Assuming that we want to delegate the hierarchy rooted at (say) /dlgt_grp  and
       that there are not yet any child cgroups under that cgroup, the ownership of the following
       is changed to the user ID of the delegatee:

       /dlgt_grp
              Changing the ownership of the root of  the  subtree  means  that  any  new  cgroups
              created  under  the  subtree (and the files they contain) will also be owned by the
              delegatee.

       /dlgt_grp/cgroup.procs
              Changing the ownership of this file means that the  delegatee  can  move  processes
              into the root of the delegated subtree.

       /dlgt_grp/cgroup.subtree_control (cgroups v2 only)
              Changing the ownership of this file means that the delegatee can enable controllers
              (that are present in /dlgt_grp/cgroup.controllers) in order to further redistribute
              resources  at  lower  levels  in  the  subtree.  (As an alternative to changing the
              ownership of this file, the delegater might instead  add  selected  controllers  to
              this file.)

       /dlgt_grp/cgroup.threads (cgroups v2 only)
              Changing  the  ownership  of  this file is necessary if a threaded subtree is being
              delegated (see  the  description  of  "thread  mode",  below).   This  permits  the
              delegatee to write thread IDs to the file.  (The ownership of this file can also be
              changed when delegating a domain subtree, but currently  this  serves  no  purpose,
              since,  as  described  below,  it  is  not possible to move a thread between domain
              cgroups by writing its thread ID to the cgroup.threads file.)

              In cgroups v1, the corresponding file that should instead be delegated is the tasks
              file.

       The  delegater  should  not change the ownership of any of the controller interfaces files
       (e.g., pids.max, memory.high) in dlgt_grp.  Those files are used from the next level above
       the delegated subtree in order to distribute resources into the subtree, and the delegatee
       should not have permission to change the resources that are distributed into the delegated
       subtree.

       See  also  the discussion of the /sys/kernel/cgroup/delegate file in NOTES for information
       about further delegatable files in cgroups v2.

       After the aforementioned steps have been performed, the delegatee can create child cgroups
       within the delegated subtree (the cgroup subdirectories and the files they contain will be
       owned by the delegatee) and move processes  between  cgroups  in  the  subtree.   If  some
       controllers  are present in dlgt_grp/cgroup.subtree_control, or the ownership of that file
       was passed to the delegatee, the delegatee can also control the further redistribution  of
       the corresponding resources into the delegated subtree.

   Cgroups v2 delegation: nsdelegate and cgroup namespaces
       Starting  with  Linux  4.13,  there  is  a  second way to perform cgroup delegation in the
       cgroups v2 hierarchy.  This is done by mounting or remounting  the  cgroup  v2  filesystem
       with  the  nsdelegate  mount option.  For example, if the cgroup v2 filesystem has already
       been mounted, we can remount it with the nsdelegate option as follows:

           mount -t cgroup2 -o remount,nsdelegate \
                            none /sys/fs/cgroup/unified

       The effect of this mount option is to cause  cgroup  namespaces  to  automatically  become
       delegation  boundaries.  More specifically, the following restrictions apply for processes
       inside the cgroup namespace:

       •  Writes to controller interface files in the root directory of the namespace  will  fail
          with  the  error  EPERM.   Processes  inside  the  cgroup  namespace can still write to
          delegatable files in the root directory of the cgroup namespace  such  as  cgroup.procs
          and cgroup.subtree_control, and can create subhierarchy underneath the root directory.

       •  Attempts  to migrate processes across the namespace boundary are denied (with the error
          ENOENT).  Processes inside the cgroup namespace can still (subject to  the  containment
          rules described below) move processes between cgroups within the subhierarchy under the
          namespace root.

       The ability to define cgroup namespaces as delegation boundaries makes  cgroup  namespaces
       more  useful.   To  understand why, suppose that we already have one cgroup hierarchy that
       has been delegated to a nonprivileged user, cecilia, using the older delegation  technique
       described  above.   Suppose further that cecilia wanted to further delegate a subhierarchy
       under the existing delegated hierarchy.  (For example, the delegated  hierarchy  might  be
       associated with an unprivileged container run by cecilia.)  Even if a cgroup namespace was
       employed, because both hierarchies  are  owned  by  the  unprivileged  user  cecilia,  the
       following illegitimate actions could be performed:

       •  A  process  in  the inferior hierarchy could change the resource controller settings in
          the root directory of that hierarchy.  (These resource controller settings are intended
          to  allow  control  to  be exercised from the parent cgroup; a process inside the child
          cgroup should not be allowed to modify them.)

       •  A process inside the inferior hierarchy could  move  processes  into  and  out  of  the
          inferior hierarchy if the cgroups in the superior hierarchy were somehow visible.

       Employing the nsdelegate mount option prevents both of these possibilities.

       The  nsdelegate  mount  option  only  has  an  effect  when performed in the initial mount
       namespace; in other mount namespaces, the option is silently ignored.

       Note: On some systems, systemd(1) automatically mounts the cgroup v2 filesystem.  In order
       to  experiment with the nsdelegate operation, it may be useful to boot the kernel with the
       following command-line options:

           cgroup_no_v1=all systemd.legacy_systemd_cgroup_controller

       These options cause the kernel to boot with the cgroups v1 controllers  disabled  (meaning
       that the controllers are available in the v2 hierarchy), and tells systemd(1) not to mount
       and use the cgroup v2 hierarchy, so that the v2 hierarchy can be manually mounted with the
       desired options after boot-up.

   Cgroup delegation containment rules
       Some  delegation  containment  rules  ensure that the delegatee can move processes between
       cgroups within the delegated subtree, but can't move processes from outside the  delegated
       subtree into the subtree or vice versa.  A nonprivileged process (i.e., the delegatee) can
       write the PID of a "target" process into a cgroup.procs file only if all of the  following
       are true:

       •  The writer has write permission on the cgroup.procs file in the destination cgroup.

       •  The writer has write permission on the cgroup.procs file in the nearest common ancestor
          of the source and destination cgroups.  Note that in some  cases,  the  nearest  common
          ancestor  may  be  the  source  or  destination cgroup itself.  This requirement is not
          enforced for cgroups v1 hierarchies, with the consequence that  containment  in  v1  is
          less  strict  than  in v2.  (For example, in cgroups v1 the user that owns two distinct
          delegated subhierarchies can move a process between the hierarchies.)

       •  If the cgroup v2 filesystem was mounted with the nsdelegate option, the writer must  be
          able to see the source and destination cgroups from its cgroup namespace.

       •  In  cgroups  v1: the effective UID of the writer (i.e., the delegatee) matches the real
          user ID or the saved set-user-ID of  the  target  process.   Before  Linux  4.11,  this
          requirement  also  applied  in  cgroups v2 (This was a historical requirement inherited
          from cgroups v1 that was later deemed unnecessary, since the other  rules  suffice  for
          containment in cgroups v2.)

       Note:  one  consequence  of  these  delegation  containment rules is that the unprivileged
       delegatee can't place the first process into the delegated subtree; instead, the delegater
       must  place  the  first  process  (a  process  owned  by the delegatee) into the delegated
       subtree.

CGROUPS VERSION 2 THREAD MODE

       Among the restrictions imposed by cgroups v2 that were not present in cgroups v1  are  the
       following:

       •  No  thread-granularity  control:  all  of  the threads of a process must be in the same
          cgroup.

       •  No internal  processes:  a  cgroup  can't  both  have  member  processes  and  exercise
          controllers on child cgroups.

       Both  of  these  restrictions were added because the lack of these restrictions had caused
       problems in cgroups v1.  In particular, the  cgroups  v1  ability  to  allow  thread-level
       granularity  for cgroup membership made no sense for some controllers.  (A notable example
       was the memory controller: since threads share an address space, it made no sense to split
       threads across different memory cgroups.)

       Notwithstanding  the  initial  design  decision  in  cgroups  v2, there were use cases for
       certain controllers, notably the cpu controller, for  which  thread-level  granularity  of
       control was meaningful and useful.  To accommodate such use cases, Linux 4.14 added thread
       mode for cgroups v2.

       Thread mode allows the following:

       •  The creation of threaded subtrees in which the threads  of  a  process  may  be  spread
          across cgroups inside the tree.  (A threaded subtree may contain multiple multithreaded
          processes.)

       •  The concept of threaded controllers, which can distribute resources across the  cgroups
          in a threaded subtree.

       •  A relaxation of the "no internal processes rule", so that, within a threaded subtree, a
          cgroup can both contain  member  threads  and  exercise  resource  control  over  child
          cgroups.

       With  the  addition  of  thread  mode,  each  nonroot  cgroup  now  contains  a  new file,
       cgroup.type, that exposes, and in some circumstances can be used to change, the "type"  of
       a cgroup.  This file contains one of the following type values:

       domain This is a normal v2 cgroup that provides process-granularity control.  If a process
              is a member of this cgroup, then all threads of the process are (by definition)  in
              the  same  cgroup.  This is the default cgroup type, and provides the same behavior
              that was provided for cgroups in the initial cgroups v2 implementation.

       threaded
              This cgroup is a member of a threaded  subtree.   Threads  can  be  added  to  this
              cgroup, and controllers can be enabled for the cgroup.

       domain threaded
              This is a domain cgroup that serves as the root of a threaded subtree.  This cgroup
              type is also known as "threaded root".

       domain invalid
              This is a cgroup  inside  a  threaded  subtree  that  is  in  an  "invalid"  state.
              Processes  can't  be  added to the cgroup, and controllers can't be enabled for the
              cgroup.  The only thing that can be done with this cgroup (other than deleting  it)
              is  to  convert  it  to  a  threaded cgroup by writing the string "threaded" to the
              cgroup.type file.

              The rationale for the existence of this "interim" type during  the  creation  of  a
              threaded  subtree (rather than the kernel simply immediately converting all cgroups
              under the threaded root to the type threaded)  is  to  allow  for  possible  future
              extensions to the thread mode model

   Threaded versus domain controllers
       With  the  addition  of  threads  mode, cgroups v2 now distinguishes two types of resource
       controllers:

       •  Threaded controllers: these controllers support thread-granularity for resource control
          and  can  be  enabled  inside threaded subtrees, with the result that the corresponding
          controller-interface files appear inside the cgroups in the threaded  subtree.   As  at
          Linux 4.19, the following controllers are threaded: cpu, perf_event, and pids.

       •  Domain  controllers:  these  controllers  support only process granularity for resource
          control.  From the perspective of a domain controller, all threads  of  a  process  are
          always  in  the  same  cgroup.   Domain  controllers can't be enabled inside a threaded
          subtree.

   Creating a threaded subtree
       There are two pathways that lead to the creation of a threaded subtree.  The first pathway
       proceeds as follows:

       (1)  We write the string "threaded" to the cgroup.type file of a cgroup y/z that currently
            has the type domain.  This has the following effects:

            •  The type of the cgroup y/z becomes threaded.

            •  The type of the parent cgroup, y, becomes domain threaded.  The parent  cgroup  is
               the root of a threaded subtree (also known as the "threaded root").

            •  All  other  cgroups  under  y that were not already of type threaded (because they
               were inside already existing threaded subtrees under the new  threaded  root)  are
               converted  to  type domain invalid.  Any subsequently created cgroups under y will
               also have the type domain invalid.

       (2)  We write the string "threaded" to each of the domain  invalid  cgroups  under  y,  in
            order  to  convert  them  to  the  type threaded.  As a consequence of this step, all
            threads under the threaded root now have the type threaded and the  threaded  subtree
            is now fully usable.  The requirement to write "threaded" to each of these cgroups is
            somewhat cumbersome, but allows for possible future  extensions  to  the  thread-mode
            model.

       The second way of creating a threaded subtree is as follows:

       (1)  In  an existing cgroup, z, that currently has the type domain, we (1.1) enable one or
            more threaded controllers and (1.2) make a process a member of z.  (These  two  steps
            can be done in either order.)  This has the following consequences:

            •  The type of z becomes domain threaded.

            •  All  of  the  descendant  cgroups  of x that were not already of type threaded are
               converted to type domain invalid.

       (2)  As before, we make the threaded subtree usable by writing the  string  "threaded"  to
            each  of  the  domain  invalid  cgroups under y, in order to convert them to the type
            threaded.

       One of the consequences of the above pathways to creating a threaded subtree is  that  the
       threaded  root  cgroup can be a parent only to threaded (and domain invalid) cgroups.  The
       threaded root cgroup can't be a parent of a domain cgroups, and a  threaded  cgroup  can't
       have a sibling that is a domain cgroup.

   Using a threaded subtree
       Within a threaded subtree, threaded controllers can be enabled in each subgroup whose type
       has been changed to threaded; upon doing so, the corresponding controller interface  files
       appear in the children of that cgroup.

       A process can be moved into a threaded subtree by writing its PID to the cgroup.procs file
       in one of the cgroups inside the tree.  This has the effect of making all of  the  threads
       in  the  process members of the corresponding cgroup and makes the process a member of the
       threaded subtree.  The threads of the process can  then  be  spread  across  the  threaded
       subtree  by  writing  their  thread  IDs  (see  gettid(2))  to the cgroup.threads files in
       different cgroups inside the subtree.  The threads of a process must  all  reside  in  the
       same threaded subtree.

       As  with  writing  to  cgroup.procs,  some  containment  rules  apply  when writing to the
       cgroup.threads file:

       •  The writer must have write permission on the cgroup.threads  file  in  the  destination
          cgroup.

       •  The  writer  must have write permission on the cgroup.procs file in the common ancestor
          of the source and destination cgroups.  (In some cases, the common ancestor may be  the
          source or destination cgroup itself.)

       •  The  source  and  destination cgroups must be in the same threaded subtree.  (Outside a
          threaded subtree, an attempt to  move  a  thread  by  writing  its  thread  ID  to  the
          cgroup.threads file in a different domain cgroup fails with the error EOPNOTSUPP.)

       The  cgroup.threads  file  is present in each cgroup (including domain cgroups) and can be
       read in order to discover the set of threads that is present in the cgroup.   The  set  of
       thread  IDs  obtained  when  reading  this file is not guaranteed to be ordered or free of
       duplicates.

       The cgroup.procs file in the threaded root shows  the  PIDs  of  all  processes  that  are
       members  of  the  threaded  subtree.   The  cgroup.procs files in the other cgroups in the
       subtree are not readable.

       Domain controllers can't be enabled in a threaded subtree; no  controller-interface  files
       appear  inside  the  cgroups  underneath  the  threaded root.  From the point of view of a
       domain controller, threaded subtrees are  invisible:  a  multithreaded  process  inside  a
       threaded  subtree appears to a domain controller as a process that resides in the threaded
       root cgroup.

       Within a threaded subtree, the "no internal processes" rule does not apply: a  cgroup  can
       both contain member processes (or thread) and exercise controllers on child cgroups.

   Rules for writing to cgroup.type and creating threaded subtrees
       A number of rules apply when writing to the cgroup.type file:

       •  Only  the  string  "threaded"  may  be  written.   In  other  words,  the only explicit
          transition that is possible is to convert a domain cgroup to type threaded.

       •  The effect of writing "threaded" depends  on  the  current  value  in  cgroup.type,  as
          follows:

          •  domain  or  domain threaded: start the creation of a threaded subtree (whose root is
             the parent of this cgroup) via the first of the pathways described above;

          •  domain invalid: convert this cgroup (which is inside a threaded subtree) to a usable
             (i.e., threaded) state;

          •  threaded: no effect (a "no-op").

       •  We  can't write to a cgroup.type file if the parent's type is domain invalid.  In other
          words, the cgroups of a threaded subtree must be converted to the threaded state  in  a
          top-down manner.

       There  are  also  some  constraints  that  must be satisfied in order to create a threaded
       subtree rooted at the cgroup x:

       •  There can be no member processes in the descendant cgroups of x.   (The  cgroup  x  can
          itself have member processes.)

       •  No domain controllers may be enabled in x's cgroup.subtree_control file.

       If  any  of  the  above  constraints is violated, then an attempt to write "threaded" to a
       cgroup.type file fails with the error ENOTSUP.

   The "domain threaded" cgroup type
       According to the pathways described above, the type of  a  cgroup  can  change  to  domain
       threaded in either of the following cases:

       •  The string "threaded" is written to a child cgroup.

       •  A  threaded  controller  is enabled inside the cgroup and a process is made a member of
          the cgroup.

       A domain threaded cgroup, x, can revert to the type domain  if  the  above  conditions  no
       longer  hold  true—that is, if all threaded child cgroups of x are removed and either x no
       longer has threaded controllers enabled or no longer has member processes.

       When a domain threaded cgroup x reverts to the type domain:

       •  All domain invalid descendants of x that  are  not  in  lower-level  threaded  subtrees
          revert to the type domain.

       •  The  root  cgroups  in  any  lower-level  threaded  subtrees  revert to the type domain
          threaded.

   Exceptions for the root cgroup
       The root cgroup of the v2 hierarchy is treated exceptionally: it can be the parent of both
       domain  and threaded cgroups.  If the string "threaded" is written to the cgroup.type file
       of one of the children of the root cgroup, then

       •  The type of that cgroup becomes threaded.

       •  The type of any descendants of that cgroup that are not part  of  lower-level  threaded
          subtrees changes to domain invalid.

       Note  that  in  this  case,  there  is  no  cgroup  whose  type  becomes  domain threaded.
       (Notionally, the root cgroup can be considered as the threaded root for the  cgroup  whose
       type was changed to threaded.)

       The  aim  of  this exceptional treatment for the root cgroup is to allow a threaded cgroup
       that employs the cpu controller to be placed as high as possible in the hierarchy,  so  as
       to minimize the (small) cost of traversing the cgroup hierarchy.

   The cgroups v2 "cpu" controller and realtime threads
       As  at  Linux  4.19,  the  cgroups  v2 cpu controller does not support control of realtime
       threads (specifically threads scheduled under any of the  policies  SCHED_FIFO,  SCHED_RR,
       described  SCHED_DEADLINE; see sched(7)).  Therefore, the cpu controller can be enabled in
       the root cgroup only if all realtime threads are  in  the  root  cgroup.   (If  there  are
       realtime  threads  in  nonroot  cgroups,  then  a  write(2)  of  the  string "+cpu" to the
       cgroup.subtree_control file fails with the error EINVAL.)

       On some systems, systemd(1) places certain realtime threads in nonroot cgroups in  the  v2
       hierarchy.   On  such systems, these threads must first be moved to the root cgroup before
       the cpu controller can be enabled.

ERRORS

       The following errors can occur for mount(2):

       EBUSY  An attempt to mount a cgroup version  1  filesystem  specified  neither  the  name=
              option (to mount a named hierarchy) nor a controller name (or all).

NOTES

       A child process created via fork(2) inherits its parent's cgroup memberships.  A process's
       cgroup memberships are preserved across execve(2).

       The clone3(2) CLONE_INTO_CGROUP flag can be used to create a child process that begins its
       life in a different version 2 cgroup from the parent process.

   /proc files
       /proc/cgroups (since Linux 2.6.24)
              This  file  contains  information  about the controllers that are compiled into the
              kernel.  An example of the contents of this file (reformatted for  readability)  is
              the following:

                  #subsys_name    hierarchy      num_cgroups    enabled
                  cpuset          4              1              1
                  cpu             8              1              1
                  cpuacct         8              1              1
                  blkio           6              1              1
                  memory          3              1              1
                  devices         10             84             1
                  freezer         7              1              1
                  net_cls         9              1              1
                  perf_event      5              1              1
                  net_prio        9              1              1
                  hugetlb         0              1              0
                  pids            2              1              1

              The fields in this file are, from left to right:

              [1]  The name of the controller.

              [2]  The unique ID of the cgroup hierarchy on which this controller is mounted.  If
                   multiple cgroups v1 controllers are bound to the  same  hierarchy,  then  each
                   will  show  the same hierarchy ID in this field.  The value in this field will
                   be 0 if:

                   •  the controller is not mounted on a cgroups v1 hierarchy;

                   •  the controller is bound to the cgroups v2 single unified hierarchy; or

                   •  the controller is disabled (see below).

              [3]  The number of control groups in this hierarchy using this controller.

              [4]  This field contains the value 1 if this controller is enabled, or 0 if it  has
                   been disabled (via the cgroup_disable kernel command-line boot parameter).

       /proc/[pid]/cgroup (since Linux 2.6.24)
              This  file describes control groups to which the process with the corresponding PID
              belongs.  The displayed information differs for cgroups version  1  and  version  2
              hierarchies.

              For  each  cgroup  hierarchy  of  which the process is a member, there is one entry
              containing three colon-separated fields:

                  hierarchy-ID:controller-list:cgroup-path

              For example:

                  5:cpuacct,cpu,cpuset:/daemons

              The colon-separated fields are, from left to right:

              [1]  For cgroups version 1 hierarchies, this field contains a unique  hierarchy  ID
                   number  that  can  be  matched  to  a  hierarchy ID in /proc/cgroups.  For the
                   cgroups version 2 hierarchy, this field contains the value 0.

              [2]  For cgroups version 1 hierarchies, this field contains a comma-separated  list
                   of  the  controllers  bound  to  the  hierarchy.   For  the  cgroups version 2
                   hierarchy, this field is empty.

              [3]  This field contains the pathname of the control  group  in  the  hierarchy  to
                   which  the  process  belongs.  This pathname is relative to the mount point of
                   the hierarchy.

   /sys/kernel/cgroup files
       /sys/kernel/cgroup/delegate (since Linux 4.15)
              This file exports a  list  of  the  cgroups  v2  files  (one  per  line)  that  are
              delegatable  (i.e.,  whose  ownership  should  be  changed  to  the  user ID of the
              delegatee).  In the future, the set of delegatable files may change  or  grow,  and
              this  file provides a way for the kernel to inform user-space applications of which
              files must be delegated.  As at Linux 4.15, one sees the following when  inspecting
              this file:

                  $ cat /sys/kernel/cgroup/delegate
                  cgroup.procs
                  cgroup.subtree_control
                  cgroup.threads

       /sys/kernel/cgroup/features (since Linux 4.15)
              Over  time,  the  set  of  cgroups  v2 features that are provided by the kernel may
              change or grow, or some features may not be enabled by default.  This file provides
              a  way  for  user-space  applications  to discover what features the running kernel
              supports and has enabled.  Features are listed one per line:

                  $ cat /sys/kernel/cgroup/features
                  nsdelegate
                  memory_localevents

              The entries that can appear in this file are:

              memory_localevents (since Linux 5.2)
                     The kernel supports the memory_localevents mount option.

              nsdelegate (since Linux 4.15)
                     The kernel supports the nsdelegate mount option.

              memory_recursiveprot (since Linux 5.7)
                     The kernel supports the memory_recursiveprot mount option.

SEE ALSO

       prlimit(1),  systemd(1),  systemd-cgls(1),  systemd-cgtop(1),   clone(2),   ioprio_set(2),
       perf_event_open(2),    setrlimit(2),   cgroup_namespaces(7),   cpuset(7),   namespaces(7),
       sched(7), user_namespaces(7)

       The kernel source file Documentation/admin-guide/cgroup-v2.rst.