Provided by: lvm2_2.03.16-1ubuntu1_amd64 
NAME
lvmcache — LVM caching
DESCRIPTION
lvm(8) includes two kinds of caching that can be used to improve the performance of a
Logical Volume (LV). When caching, varying subsets of an LV's data are temporarily stored
on a smaller, faster device (e.g. an SSD) to improve the performance of the LV.
To do this with lvm, a new special LV is first created from the faster device. This LV
will hold the cache. Then, the new fast LV is attached to the main LV by way of an
lvconvert command. lvconvert inserts one of the device mapper caching targets into the
main LV's i/o path. The device mapper target combines the main LV and fast LV into a
hybrid device that looks like the main LV, but has better performance. While the main LV
is being used, portions of its data will be temporarily and transparently stored on the
special fast LV.
The two kinds of caching are:
• A read and write hot-spot cache, using the dm-cache kernel module. This cache tracks
access patterns and adjusts its content deliberately so that commonly used parts of the
main LV are likely to be found on the fast storage. LVM refers to this using the LV type
cache.
• A write cache, using the dm-writecache kernel module. This cache can be used with SSD
or PMEM devices to speed up all writes to the main LV. Data read from the main LV is not
stored in the cache, only newly written data. LVM refers to this using the LV type
writecache.
USAGE
1. Identify main LV that needs caching
The main LV may already exist, and is located on larger, slower devices. A main LV would
be created with a command like:
# lvcreate -n main -L Size vg /dev/slow_hhd
2. Identify fast LV to use as the cache
A fast LV is created using one or more fast devices, like an SSD. This special LV will be
used to hold the cache:
# lvcreate -n fast -L Size vg /dev/fast_ssd
# lvs -a
LV Attr Type Devices
fast -wi------- linear /dev/fast_ssd
main -wi------- linear /dev/slow_hhd
3. Start caching the main LV
To start caching the main LV, convert the main LV to the desired caching type, and specify
the fast LV to use as the cache:
using dm-cache (with cachepool):
# lvconvert --type cache --cachepool fast vg/main
using dm-cache (with cachevol):
# lvconvert --type cache --cachevol fast vg/main
using dm-writecache (with cachevol):
# lvconvert --type writecache --cachevol fast vg/main
For more alteratives see:
dm-cache command shortcut
dm-cache with separate data and metadata LVs
4. Display LVs
Once the fast LV has been attached to the main LV, lvm reports the main LV type as either
cache or writecache depending on the type used. While attached, the fast LV is hidden,
and renamed with a _cvol or _cpool suffix. It is displayed by lvs -a. The _corig or
_wcorig LV represents the original LV without the cache.
using dm-cache (with cachepool):
# lvs -ao+devices
LV Pool Type Devices
main [fast_cpool] cache main_corig(0)
[fast_cpool] cache-pool fast_pool_cdata(0)
[fast_cpool_cdata] linear /dev/fast_ssd
[fast_cpool_cmeta] linear /dev/fast_ssd
[main_corig] linear /dev/slow_hhd
using dm-cache (with cachevol):
# lvs -ao+devices
LV Pool Type Devices
main [fast_cvol] cache main_corig(0)
[fast_cvol] linear /dev/fast_ssd
[main_corig] linear /dev/slow_hhd
using dm-writecache (with cachevol):
# lvs -ao+devices
LV Pool Type Devices
main [fast_cvol] writecache main_wcorig(0)
[fast_cvol] linear /dev/fast_ssd
[main_wcorig] linear /dev/slow_hhd
5. Use the main LV
Use the LV until the cache is no longer wanted, or needs to be changed.
6. Stop caching
To stop caching the main LV and also remove unneeded cache pool, use the --uncache:
# lvconvert --uncache vg/main
# lvs -a
LV VG Attr Type Devices
main vg -wi------- linear /dev/slow_hhd
To stop caching the main LV, separate the fast LV from the main LV. This changes the type
of the main LV back to what it was before the cache was attached.
# lvconvert --splitcache vg/main
# lvs -a
LV VG Attr Type Devices
fast vg -wi------- linear /dev/fast_ssd
main vg -wi------- linear /dev/slow_hhd
7. Create a new LV with caching
A new LV can be created with caching attached at the time of creation using the following
command:
# lvcreate --type cache|writecache -n Name -L Size
--cachedevice /dev/fast_ssd vg /dev/slow_hhd
The main LV is created with the specified Name and Size from the slow_hhd. A hidden fast
LV is created on the fast_ssd and is then attached to the new main LV. If the fast_ssd is
unused, the entire disk will be used as the cache unless the --cachesize option is used to
specify a size for the fast LV. The --cachedevice option can be repeated to use multiple
disks for the fast LV.
OPTIONS
option args
--cachepool CachePoolLV|LV
Pass this option a cachepool LV or a standard LV. When using a cache pool, lvm places
cache data and cache metadata on different LVs. The two LVs together are called a cache
pool. This has a bit better performance for dm-cache and permits specific placement and
segment type selection for data and metadata volumes. A cache pool is represented as a
special type of LV that cannot be used directly. If a standard LV is passed with this
option, lvm will first convert it to a cache pool by combining it with another LV to use
for metadata. This option can be used with dm-cache.
--cachevol LV
Pass this option a fast LV that should be used to hold the cache. With a cachevol, cache
data and metadata are stored in different parts of the same fast LV. This option can be
used with dm-writecache or dm-cache.
--cachedevice PV
This option can be used in place of --cachevol, in which case a cachevol LV will be
created using the specified device. This option can be repeated to create a cachevol
using multiple devices, or a tag name can be specified in which case the cachevol will be
created using any of the devices with the given tag. If a named cache device is unused,
the entire device will be used to create the cachevol. To create a cachevol of a specific
size from the cache devices, include the --cachesize option.
dm-cache block size
A cache pool will have a logical block size of 4096 bytes if it is created on a device
with a logical block size of 4096 bytes.
If a main LV has logical block size 512 (with an existing xfs file system using that
size), then it cannot use a cache pool with a 4096 logical block size. If the cache pool
is attached, the main LV will likely fail to mount.
To avoid this problem, use a mkfs option to specify a 4096 block size for the file system,
or attach the cache pool before running mkfs.
dm-writecache block size
The dm-writecache block size can be 4096 bytes (the default), or 512 bytes. The default
4096 has better performance and should be used except when 512 is necessary for
compatibility. The dm-writecache block size is specified with --cachesettings
block_size=4096|512 when caching is started.
When a file system like xfs already exists on the main LV prior to caching, and the file
system is using a block size of 512, then the writecache block size should be set to 512.
(The file system will likely fail to mount if writecache block size of 4096 is used in
this case.)
Check the xfs sector size while the fs is mounted:
# xfs_info /dev/vg/main
Look for sectsz=512 or sectsz=4096
The writecache block size should be chosen to match the xfs sectsz value.
It is also possible to specify a sector size of 4096 to mkfs.xfs when creating the file
system. In this case the writecache block size of 4096 can be used.
The writecache block size is displayed by the command:
lvs -o writecacheblocksize VG/LV
dm-writecache memory usage
The amount of main system memory used by dm-writecache can be a factor when selecting the
writecache cachevol size and the writecache block size.
• writecache block size 4096: each 100 GiB of writecache cachevol uses slighly over 2 GiB
of system memory.
• writecache block size 512: each 100 GiB of writecache cachevol uses a little over 16 GiB
of system memory.
dm-writecache settings
To specify dm-writecache tunable settings on the command line, use:
--cachesettings 'option=N' or
--cachesettings 'option1=N option2=N ...'
For example, --cachesettings 'high_watermark=90 writeback_jobs=4'.
To include settings when caching is started, run:
# lvconvert --type writecache --cachevol fast \
--cachesettings 'option=N' vg/main
To change settings for an existing writecache, run:
# lvchange --cachesettings 'option=N' vg/main
To clear all settings that have been applied, run:
# lvchange --cachesettings '' vg/main
To view the settings that are applied to a writecache LV, run:
# lvs -o cachesettings vg/main
Tunable settings are:
high_watermark = <percent>
Start writeback when the writecache usage reaches this percent (0-100).
low_watermark = <percent>
Stop writeback when the writecache usage reaches this percent (0-100).
writeback_jobs = <count>
Limit the number of blocks that are in flight during writeback. Setting this value
reduces writeback throughput, but it may improve latency of read requests.
autocommit_blocks = <count>
When the application writes this amount of blocks without issuing the FLUSH
request, the blocks are automatically commited.
autocommit_time = <milliseconds>
The data is automatically commited if this time passes and no FLUSH request is
received.
fua = 0|1
Use the FUA flag when writing data from persistent memory back to the underlying
device. Applicable only to persistent memory.
nofua = 0|1
Don't use the FUA flag when writing back data and send the FLUSH request
afterwards. Some underlying devices perform better with fua, some with nofua.
Testing is necessary to determine which. Applicable only to persistent memory.
cleaner = 0|1
Setting cleaner=1 enables the writecache cleaner mode in which data is gradually
flushed from the cache. If this is done prior to detaching the writecache, then
the splitcache command will have little or no flushing to perform. If not done
beforehand, the splitcache command enables the cleaner mode and waits for flushing
to complete before detaching the writecache. Adding cleaner=0 to the splitcache
command will skip the cleaner mode, and any required flushing is performed in
device suspend.
dm-writecache using metadata profiles
In addition to specifying writecache settings on the command line, they can also be set in
lvm.conf, or in a profile file, using the allocation/cache_settings/writecache config
structure shown below.
It's possible to prepare a number of different profile files in the /etc/lvm/profile
directory and specify the file name of the profile when starting writecache.
Example
# cat <<EOF > /etc/lvm/profile/cache_writecache.profile
allocation {
cache_settings {
writecache {
high_watermark=60
writeback_jobs=1024
}
}
}
EOF
# lvcreate -an -L10G --name fast vg /dev/fast_ssd
# lvcreate --type writecache -L10G --name main --cachevol fast \
--metadataprofile cache_writecache vg /dev/slow_hdd
dm-cache with separate data and metadata LVs
Preferred way of using dm-cache is to place the cache metadata and cache data on separate
LVs. To do this, a "cache pool" is created, which is a special LV that references two sub
LVs, one for data and one for metadata.
To create a cache pool of given data size and let lvm2 calculate appropriate metadata
size:
# lvcreate --type cache-pool -L DataSize -n fast vg /dev/fast_ssd1
To create a cache pool from separate LV and let lvm2 calculate appropriate cache metadata
size:
# lvcreate -n fast -L DataSize vg /dev/fast_ssd1
# lvconvert --type cache-pool vg/fast /dev/fast_ssd1
To create a cache pool from two separate LVs:
# lvcreate -n fast -L DataSize vg /dev/fast_ssd1
# lvcreate -n fastmeta -L MetadataSize vg /dev/fast_ssd2
# lvconvert --type cache-pool --poolmetadata fastmeta vg/fast
Then use the cache pool LV to start caching the main LV:
# lvconvert --type cache --cachepool fast vg/main
A variation of the same procedure automatically creates a cache pool when caching is
started. To do this, use a standard LV as the --cachepool (this will hold cache data),
and use another standard LV as the --poolmetadata (this will hold cache metadata). LVM
will create a cache pool LV from the two specified LVs, and use the cache pool to start
caching the main LV.
# lvcreate -n fast -L DataSize vg /dev/fast_ssd1
# lvcreate -n fastmeta -L MetadataSize vg /dev/fast_ssd2
# lvconvert --type cache --cachepool fast \
--poolmetadata fastmeta vg/main
dm-cache cache modes
The default dm-cache cache mode is "writethrough". Writethrough ensures that any data
written will be stored both in the cache and on the origin LV. The loss of a device
associated with the cache in this case would not mean the loss of any data.
A second cache mode is "writeback". Writeback delays writing data blocks from the cache
back to the origin LV. This mode will increase performance, but the loss of a cache
device can result in lost data.
With the --cachemode option, the cache mode can be set when caching is started, or changed
on an LV that is already cached. The current cache mode can be displayed with the
cache_mode reporting option:
lvs -o+cache_mode VG/LV
lvm.conf(5) allocation/cache_mode
defines the default cache mode.
# lvconvert --type cache --cachemode writethrough \
--cachepool fast vg/main
# lvconvert --type cache --cachemode writethrough \
--cachevol fast vg/main
dm-cache chunk size
The size of data blocks managed by dm-cache can be specified with the --chunksize option
when caching is started. The default unit is KiB. The value must be a multiple of 32KiB
between 32KiB and 1GiB. Cache chunks bigger then 512KiB shall be only used when necessary.
Using a chunk size that is too large can result in wasteful use of the cache, in which
small reads and writes cause large sections of an LV to be stored in the cache. It can
also require increasing migration threshold which defaults to 2048 sectors (1 MiB). Lvm2
ensures migration threshold is at least 8 chunks in size. This may in some cases result in
very high bandwidth load of transfering data between the cache LV and its cache origin LV.
However, choosing a chunk size that is too small can result in more overhead trying to
manage the numerous chunks that become mapped into the cache. Overhead can include both
excessive CPU time searching for chunks, and excessive memory tracking chunks.
Command to display the chunk size:
lvs -o+chunksize VG/LV
lvm.conf(5) allocation/cache_pool_chunk_size
controls the default chunk size.
The default value is shown by:
lvmconfig --type default allocation/cache_pool_chunk_size
Checking migration threshold (in sectors) of running cached LV:
lvs -o+kernel_cache_settings VG/LV
dm-cache migration threshold
Migrating data between the origin and cache LV uses bandwidth. The user can set a
throttle to prevent more than a certain amount of migration occurring at any one time.
Currently dm-cache is not taking any account of normal io traffic going to the devices.
User can set migration threshold via cache policy settings as
"migration_threshold=<#sectors>" to set the maximum number of sectors being migrated, the
default being 2048 sectors (1MiB).
Command to set migration threshold to 2MiB (4096 sectors):
lvcreate --cachepolicy 'migration_threshold=4096' VG/LV
Command to display the migration threshold:
lvs -o+kernel_cache_settings,cache_settings VG/LV
lvs -o+chunksize VG/LV
dm-cache cache policy
The dm-cache subsystem has additional per-LV parameters: the cache policy to use, and
possibly tunable parameters for the cache policy. Three policies are currently available:
"smq" is the default policy, "mq" is an older implementation, and "cleaner" is used to
force the cache to write back (flush) all cached writes to the origin LV.
The older "mq" policy has a number of tunable parameters. The defaults are chosen to be
suitable for the majority of systems, but in special circumstances, changing the settings
can improve performance.
With the --cachepolicy and --cachesettings options, the cache policy and settings can be
set when caching is started, or changed on an existing cached LV (both options can be used
together). The current cache policy and settings can be displayed with the cache_policy
and cache_settings reporting options:
lvs -o+cache_policy,cache_settings VG/LV
Change the cache policy and settings of an existing LV.
# lvchange --cachepolicy mq --cachesettings \
'migration_threshold=2048 random_threshold=4' vg/main
lvm.conf(5) allocation/cache_policy
defines the default cache policy.
lvm.conf(5) allocation/cache_settings
defines the default cache settings.
dm-cache using metadata profiles
Cache pools allows to set a variety of options. Lots of these settings can be specified in
lvm.conf or profile settings. You can prepare a number of different profiles in the
/etc/lvm/profile directory and just specify the metadata profile file name when caching LV
or creating cache-pool. Check the output of lvmconfig --type default --withcomments for a
detailed description of all individual cache settings.
Example
# cat <<EOF > /etc/lvm/profile/cache_big_chunk.profile
allocation {
cache_pool_metadata_require_separate_pvs=0
cache_pool_chunk_size=512
cache_metadata_format=2
cache_mode="writethrough"
cache_policy="smq"
cache_settings {
smq {
migration_threshold=8192
random_threshold=4096
}
}
}
EOF
# lvcreate --cache -L10G --metadataprofile cache_big_chunk vg/main \
/dev/fast_ssd
# lvcreate --cache -L10G vg/main --config \
'allocation/cache_pool_chunk_size=512' /dev/fast_ssd
dm-cache spare metadata LV
See lvmthin(7) for a description of the "pool metadata spare" LV. The same concept is
used for cache pools.
dm-cache metadata formats
There are two disk formats for dm-cache metadata. The metadata format can be specified
with --cachemetadataformat when caching is started, and cannot be changed. Format 2 has
better performance; it is more compact, and stores dirty bits in a separate btree, which
improves the speed of shutting down the cache. With auto, lvm selects the best option
provided by the current dm-cache kernel module.
RAID1 cache device
RAID1 can be used to create the fast LV holding the cache so that it can tolerate a device
failure. (When using dm-cache with separate data and metadata LVs, each of the sub-LVs
can use RAID1.)
# lvcreate -n main -L Size vg /dev/slow
# lvcreate --type raid1 -m 1 -n fast -L Size vg /dev/ssd1 /dev/ssd2
# lvconvert --type cache --cachevol fast vg/main
dm-cache command shortcut
A single command can be used to cache main LV with automatic creation of a cache-pool:
# lvcreate --cache --size CacheDataSize VG/LV [FastPVs]
or the longer variant
# lvcreate --type cache --size CacheDataSize \
--name NameCachePool VG/LV [FastPVs]
In this command, the specified LV already exists, and is the main LV to be cached. The
command creates a new cache pool with size and given name or the name is automatically
selected from a sequence lvolX_cpool, using the optionally specified fast PV(s) (typically
an ssd). Then it attaches the new cache pool to the existing main LV to begin caching.
(Note: ensure that the specified main LV is a standard LV. If a cache pool LV is
mistakenly specified, then the command does something different.)
(Note: the type option is interpreted differently by this command than by normal lvcreate
commands in which --type specifies the type of the newly created LV. In this case, an LV
with type cache-pool is being created, and the existing main LV is being converted to type
cache.)
SEE ALSO
lvm.conf(5), lvchange(8), lvcreate(8), lvdisplay(8), lvextend(8), lvremove(8),
lvrename(8), lvresize(8), lvs(8),
vgchange(8), vgmerge(8), vgreduce(8), vgsplit(8),
cache_check(8), cache_dump(8), cache_repair(8)