NAME

       fence_eaton_snmp - Fence agent for Eaton over SNMP

DESCRIPTION

       fence_eaton_snmp  is  an  I/O Fencing agent which can be used with the Eaton network power
       switch. It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v1
       and v3 with all combinations of  authenticity/privacy settings.

       fence_eaton_snmp  accepts  options on the command line as well as from stdin. Fenced sends
       parameters through stdin when it execs the agent. fence_eaton_snmp can be  run  by  itself
       with  command  line options.  This is useful for testing and for turning outlets on or off
       from scripts.

       Vendor URL: http://powerquality.eaton.com

PARAMETERS

       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -c, --community=[community]
              Set the community string (Default Value: private)

       -a, --ip=[ip]
              IP address or hostname of fencing device This parameter is always required.

       -u, --ipport=[port]
              TCP/UDP  port  to  use  for connection with device (Default Value: 161)

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[id]
              Physical plug number on device, UUID or identification of machine This parameter is
              always required.

       -b, --snmp-auth-prot=[prot]
              Set authentication protocol (MD5|SHA)

       -P, --snmp-priv-passwd=[pass]
              Set privacy protocol password

       -R, --snmp-priv-passwd-script
              Script to run to retrieve privacy password

       -B, --snmp-priv-prot=[prot]
              Set privacy protocol (DES|AES)

       -E, --snmp-sec-level=[level]
              Set security level (noAuthNoPriv|authNoPriv|authPriv)

       -d, --snmp-version=[version]
              Specifies SNMP version to use (1|2c|3) (Default Value: 1)

       -l, --username=[name]
              Login name

       -q, --quiet
              Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       -v, --verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       --verbose-level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --plug-separator=[char]
              Separator  for  plug  parameter when specifying more than 1 plug (Default Value: ,)

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 2)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --stonith-status-sleep=[seconds]
              Sleep X seconds between status calls during a STONITH  action  (Default  Value:  1)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

       --snmpget-path=[path]
              Path to snmpget binary (Default Value: /usr/bin/snmpget)

       --snmpset-path=[path]
              Path to snmpset binary (Default Value: /usr/bin/snmpset)

       --snmpwalk-path=[path]
              Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List  available  plugs  with  aliases/virtual machines if there is support for more
              then one device. Returns N/A otherwise.

       list-status
              List available plugs with aliases/virtual machines and their power state if it  can
              be obtained without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       action Fencing action (Default Value: reboot)

       community
              Set the community string (Default Value: private)

       ip     IP  address  or  hostname  of  fencing  device  This  parameter is always required.
              Obsoletes: ipaddr

       ipport TCP/UDP port to use for connection with device (Default  Value:  161)

       password
              Login password or passphrase Obsoletes: passwd

       password_script
              Script to run to retrieve password Obsoletes: passwd_script

       plug   Physical plug number on device, UUID or identification of machine This parameter is
              always required. Obsoletes: port

       snmp_auth_prot
              Set authentication protocol (MD5|SHA)

       snmp_priv_passwd
              Set privacy protocol password

       snmp_priv_passwd_script
              Script to run to retrieve privacy password

       snmp_priv_prot
              Set privacy protocol (DES|AES)

       snmp_sec_level
              Set security level (noAuthNoPriv|authNoPriv|authPriv)

       snmp_version
              Specifies SNMP version to use (1|2c|3) (Default Value: 1)

       username
              Login name Obsoletes: login

       quiet  Disable logging to stderr. Does not affect --verbose or --debug-file or logging  to
              syslog.

       verbose
              Verbose  mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
              increase verbosity.

       verbose_level
              Level of debugging detail in output. Defaults to  the  number  of  --verbose  flags
              specified  on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith device
              configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       plug_separator
              Separator for plug parameter when specifying more than 1 plug  (Default  Value:  ,)

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 2)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       stonith_status_sleep
              Sleep  X  seconds  between  status calls during a STONITH action (Default Value: 1)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

       snmpget_path
              Path to snmpget binary (Default Value: /usr/bin/snmpget)

       snmpset_path
              Path to snmpset binary (Default Value: /usr/bin/snmpset)

       snmpwalk_path
              Path to snmpwalk binary (Default Value: /usr/bin/snmpwalk)