Provided by: fence-agents-extra_4.12.1-1ubuntu1_amd64 bug

NAME

       fence_gce - Fence agent for GCE (Google Cloud Engine)

DESCRIPTION

       fence_gce   is  an  I/O  Fencing  agent  for  GCE  (Google  Cloud  Engine).  It  uses  the
       googleapiclient library to connect to GCE.  googleapiclient can be configured with  Google
       SDK  CLI  or  by executing 'gcloud auth application-default login'.  For instructions see:
       https://cloud.google.com/compute/docs/tutorials/python-guide

       fence_gce accepts options on the  command  line  as  well  as  from  stdin.  Fenced  sends
       parameters  through  stdin  when  it  execs the agent. fence_gce can be run by itself with
       command line options.  This is useful for testing and for turning outlets on or  off  from
       scripts.

       Vendor URL: http://cloud.google.com

PARAMETERS


       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -m, --method=[method]
              Method to fence (onoff|cycle) (Default Value: cycle)

       -n, --plug=[id]
              Physical plug number on device, UUID or identification of machine This parameter is
              always required.

       --zone=[name]
              Zone.

       --project=[name]
              Project ID.

       --stackdriver-logging
              Stackdriver-logging support.

       --baremetalsolution
              If enabled this is a bare metal offering from google.

       --apitimeout=[seconds]
              Timeout in seconds to use for API calls, default is 60. (Default Value: 60)

       --retries=[retries]
              Number of retries on failure for API calls, default is 3. (Default Value: 3)

       --retrysleep=[seconds]
              Time to sleep in seconds between API retries, default  is  5.  (Default  Value:  5)

       --serviceaccount=[filename]
              Service Account to use for authentication to the google cloud APIs.

       --plugzonemap=[plugzonemap]
              Comma separated zone map when fencing multiple plugs.

       --proxyhost=[proxy_host]
              If a proxy is used for internet access, the proxy host should be specified.

       --proxyport=[proxy_port]
              If a proxy is used for internet access, the proxy port should be specified.

       --earlyexit
              If  an existing reset operation is detected, the fence agent will return before the
              operation completes with a 0 return code.

       --warntimeout=[warn_timeout]
              If the operation is not completed within the timeout, the  cluster  operations  are
              allowed to continue.

       --errortimeout=[error_timeout]
              If  the  operation  is not completed within the timeout, cluster is notified of the
              operation failure.

       --runonwarn=[run_on_warn]
              If a timeout would occur while running the agent, then the supplied command is run.

       --runonfail=[run_on_fail]
              If a failure would occur while running the agent, then the supplied command is run.

       -q, --quiet
              Disable logging to stderr. Does not affect --verbose or --debug-file or logging  to
              syslog.

       -v, --verbose
              Verbose  mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
              increase verbosity.

       --verbose-level
              Level of debugging detail in output. Defaults to  the  number  of  --verbose  flags
              specified  on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith device
              configuration (i.e., on stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --plug-separator=[char]
              Separator for plug parameter when specifying more than 1 plug  (Default  Value:  ,)

       -C, --separator=[char]
              Separator for CSV created by 'list' operation (Default Value: ,)

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 60)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --stonith-status-sleep=[seconds]
              Sleep  X  seconds  between  status calls during a STONITH action (Default Value: 1)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

ACTIONS


       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       list   List available plugs with aliases/virtual machines if there  is  support  for  more
              then one device. Returns N/A otherwise.

       list-status
              List  available plugs with aliases/virtual machines and their power state if it can
              be obtained without additional commands.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS


       action Fencing action (Default Value: reboot)

       method Method to fence (onoff|cycle) (Default Value: cycle)

       plug   Physical plug number on device, UUID or identification of machine This parameter is
              always required. Obsoletes: port

       zone   Zone.

       project
              Project ID.

       stackdriver_logging
              Stackdriver-logging support. Obsoletes: stackdriver-logging

       baremetalsolution
              If enabled this is a bare metal offering from google.

       apitimeout
              Timeout in seconds to use for API calls, default is 60. (Default Value: 60)

       retries
              Number of retries on failure for API calls, default is 3. (Default Value: 3)

       retrysleep
              Time  to  sleep  in  seconds  between API retries, default is 5. (Default Value: 5)

       serviceaccount
              Service Account to use for authentication to the google cloud APIs.

       plugzonemap
              Comma separated zone map when fencing multiple plugs.

       proxyhost
              If a proxy is used for internet access, the proxy host should be specified.

       proxyport
              If a proxy is used for internet access, the proxy port should be specified.

       earlyexit
              If an existing reset operation is detected, the fence agent will return before  the
              operation completes with a 0 return code.

       warntimeout
              If  the  operation  is not completed within the timeout, the cluster operations are
              allowed to continue.

       errortimeout
              If the operation is not completed within the timeout, cluster is  notified  of  the
              operation failure.

       runonwarn
              If a timeout would occur while running the agent, then the supplied command is run.

       runonfail
              If a failure would occur while running the agent, then the supplied command is run.

       quiet  Disable  logging to stderr. Does not affect --verbose or --debug-file or logging to
              syslog.

       verbose
              Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv)  to
              increase verbosity.

       verbose_level
              Level  of  debugging  detail  in  output. Defaults to the number of --verbose flags
              specified on  the  command  line,  or  to  1  if  verbose=1  in  a  stonith  device
              configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       plug_separator
              Separator  for  plug  parameter when specifying more than 1 plug (Default Value: ,)

       separator
              Separator for CSV created by 'list' operation (Default Value: ,)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 60)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       stonith_status_sleep
              Sleep X seconds between status calls during a STONITH  action  (Default  Value:  1)

       retry_on
              Count of attempts to retry power on (Default Value: 1)