Provided by: fence-agents-extra_4.12.1-1ubuntu1_amd64 
NAME
fence_ilo - Fence agent for HP iLO
fence_ilo2 - Fence agent for HP iLO2 (symlink)
DESCRIPTION
fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO)
PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is
established, the agent is able to communicate with the iLO card through an XML stream.
fence_ilo accepts options on the command line as well as from stdin. Fenced sends
parameters through stdin when it execs the agent. fence_ilo can be run by itself with
command line options. This is useful for testing and for turning outlets on or off from
scripts.
Vendor URL: http://www.hp.com
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: reboot)
-a, --ip=[ip]
IP address or hostname of fencing device
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 443)
-t, --notls
Disable TLS negotiation and force SSL3.0. This should only be used for devices that
do not support TLS1.0 and up.
-p, --password=[password]
Login password or passphrase
-S, --password-script=[script]
Script to run to retrieve password
-n, --plug=[ip]
IP address or hostname of fencing device (together with --port-as-ip)
-r, --ribcl-version=[version]
Force ribcl version to use
-z, --ssl
Use SSL connection with verifying certificate (Default Value: 1)
--ssl-insecure
Use SSL connection without verifying certificate
--ssl-secure
Use SSL connection with verifying certificate
--tls1.0
Disable TLS negotiation and force TLS1.0. This should only be used for devices that
do not support TLS1.1 and up.
-l, --username=[name]
Login name This parameter is always required.
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--plug-separator=[char]
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 10)
--port-as-ip
Make "port/plug" to be an alias to IP address
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 3)
--gnutlscli-path=[path]
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: reboot)
ip IP address or hostname of fencing device Obsoletes: ipaddr
ipport TCP/UDP port to use for connection with device (Default Value: 443)
notls Disable TLS negotiation and force SSL3.0. This should only be used for devices that
do not support TLS1.0 and up.
password
Login password or passphrase Obsoletes: passwd
password_script
Script to run to retrieve password Obsoletes: passwd_script
plug IP address or hostname of fencing device (together with --port-as-ip) Obsoletes:
port
ribcl_version
Force ribcl version to use Obsoletes: ribcl
ssl Use SSL connection with verifying certificate (Default Value: 1)
ssl_insecure
Use SSL connection without verifying certificate
ssl_secure
Use SSL connection with verifying certificate
tls1.0 Disable TLS negotiation and force TLS1.0. This should only be used for devices that
do not support TLS1.1 and up.
username
Login name This parameter is always required. Obsoletes: login
quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
plug_separator
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 10)
port_as_ip
Make "port/plug" to be an alias to IP address
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
retry_on
Count of attempts to retry power on (Default Value: 3)
gnutlscli_path
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)