Provided by: fence-agents-extra_4.12.1-1ubuntu1_amd64 
NAME
fence_sanbox2 - Fence agent for QLogic SANBox2 FC switches
DESCRIPTION
fence_sanbox2 is an I/O Fencing agent which can be used with QLogic SANBox2 FC switches.
It logs into a SANBox2 switch via telnet and disables a specified port. Disabling the
port which a machine is connected to effectively fences that machine. Lengthy telnet
connections to the switch should be avoided while a GFS cluster is running because the
connection will block any necessary fencing actions.
fence_sanbox2 accepts options on the command line as well as from stdin. Fenced sends
parameters through stdin when it execs the agent. fence_sanbox2 can be run by itself with
command line options. This is useful for testing and for turning outlets on or off from
scripts.
Vendor URL: http://www.qlogic.com
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: off)
-c, --command-prompt=[prompt]
Force Python regex for command prompt (Default Value: [' #> '])
-a, --ip=[ip]
IP address or hostname of fencing device This parameter is always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 23)
-p, --password=[password]
Login password or passphrase
-S, --password-script=[script]
Script to run to retrieve password
-n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is
always required.
-l, --username=[name]
Login name This parameter is always required.
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--plug-separator=[char]
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--telnet-path=[path]
Path to telnet binary (Default Value: /usr/bin/telnet)
ACTIONS
on Power on machine.
off Power off machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more
then one device. Returns N/A otherwise.
list-status
List available plugs with aliases/virtual machines and their power state if it can
be obtained without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: off)
command_prompt
Force Python regex for command prompt (Default Value: [' #> ']) Obsoletes:
cmd_prompt
ip IP address or hostname of fencing device This parameter is always required.
Obsoletes: ipaddr
ipport TCP/UDP port to use for connection with device (Default Value: 23)
password
Login password or passphrase Obsoletes: passwd
password_script
Script to run to retrieve password Obsoletes: passwd_script
plug Physical plug number on device, UUID or identification of machine This parameter is
always required. Obsoletes: port
username
Login name This parameter is always required. Obsoletes: login
quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
plug_separator
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
separator
Separator for CSV created by 'list' operation (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
retry_on
Count of attempts to retry power on (Default Value: 1)
telnet_path
Path to telnet binary (Default Value: /usr/bin/telnet)