Provided by: fence-agents-extra_4.12.1-1ubuntu1_amd64 
NAME
fence_zvmip - Fence agent for use with z/VM Virtual Machines
DESCRIPTION
The fence_zvm agent is intended to be used with with z/VM SMAPI service via TCP/IP
To use this agent the z/VM SMAPI service needs to be configured to allow the virtual
machine running this agent to connect to it and issue the image_recycle operation. This
involves updating the VSMWORK1 AUTHLIST VMSYS:VSMWORK1. file. The entry should look
something similar to this:
Column 1 Column 66 Column 131
| | |
V V V
XXXXXXXX ALL IMAGE_CHARACTERISTICS
Where XXXXXXX is the name of the virtual machine used in the authuser field of the
request. This virtual machine also has to be authorized to access the system's directory
manager.
fence_zvmip accepts options on the command line as well as from stdin. Fenced sends
parameters through stdin when it execs the agent. fence_zvmip can be run by itself with
command line options. This is useful for testing and for turning outlets on or off from
scripts.
Vendor URL: http://www.ibm.com
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: reboot)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-a, --ip=[ip]
IP address or hostname of fencing device This parameter is always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 44444)
-m, --method=[method]
Method to fence (onoff|cycle) (Default Value: onoff)
-p, --password=[password]
Login password or passphrase
-S, --password-script=[script]
Script to run to retrieve password
-n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is
always required.
-z, --ssl
Use SSL connection with verifying certificate (Default) (Default Value: 1)
--ssl-insecure
Use SSL connection without verifying certificate
--ssl-secure
Use SSL connection with verifying certificate
-l, --username=[name]
Login name This parameter is always required.
--disable-ssl
Don't use SSL
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--plug-separator=[char]
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--missing-as-off
Missing port returns OFF instead of failure (Default Value: 1)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 5)
--stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--gnutlscli-path=[path]
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more
then one device. Returns N/A otherwise.
list-status
List available plugs with aliases/virtual machines and their power state if it can
be obtained without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: reboot)
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ip IP address or hostname of fencing device This parameter is always required.
Obsoletes: ipaddr
ipport TCP/UDP port to use for connection with device (Default Value: 44444)
method Method to fence (onoff|cycle) (Default Value: onoff)
password
Login password or passphrase Obsoletes: passwd
password_script
Script to run to retrieve password Obsoletes: passwd_script
plug Physical plug number on device, UUID or identification of machine This parameter is
always required. Obsoletes: port
ssl Use SSL connection with verifying certificate (Default) (Default Value: 1)
ssl_insecure
Use SSL connection without verifying certificate
ssl_secure
Use SSL connection with verifying certificate
username
Login name This parameter is always required. Obsoletes: login
disable_ssl
Don't use SSL
quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to
syslog.
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to
increase verbosity.
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags
specified on the command line, or to 1 if verbose=1 in a stonith device
configuration (i.e., on stdin).
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
plug_separator
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
separator
Separator for CSV created by 'list' operation (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
missing_as_off
Missing port returns OFF instead of failure (Default Value: 1)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 5)
stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
retry_on
Count of attempts to retry power on (Default Value: 1)
gnutlscli_path
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)