Provided by: opengnb_1.3.0.c-2_amd64 bug

NAME

       gnb - gnb command to setup VPN used by opengnb

SYNOPSIS

       gnb [-i IFNAME] -c CONFIG_PATH [OPTION]

DESCRIPTION

       GNB  version 1.2.8.1  protocol version 1.1.2

       registered packet filter: gnb_pf_dump gnb_pf_route gnb_pf_crypto_xor gnb_pf_crypto_arc4

Command Summary:

       -c, --conf
              config path

       -n, --nodeid
              nodeid

       -P, --public-index-service
              run as public index service

       -I, --index-address
              index address

       -a, --node-address
              node ip address

       -r, --node-route
              node route

       -i, --ifname
              TUN Device Name, it's gnb_tun in Linux default.

       -4, --ipv4-only
              Use IPv4 Only

       -6, --ipv6-only
              Use IPv6 Only

       -d, --daemon
              daemon

       -q, --quiet
              disabled console output

       -t, --selftest
              self test

       -p, --passcode
              a  hexadecimal  string of 32-bit unsigned integer, use to strengthen safety default
              is 0x9d078107

       -l, --listen
              listen address default is '0.0.0.0:9001'

       -b, --ctl-block
              ctl block mapper file

       -e, --es-argv
              pass-through gnb_es argv

       -V, --verbose
              verbose mode

       --node-woker-queue
              node  woker queue length

       --index-woker-queue
              index woker queue length

       --index-service-woker-queue
              index service woker queue length

       --port-detect-start
              port detect start

       --port-detect-end
              port detect end

       --port-detect-range
              port detect range

       --mtu  TUN Device MTU ipv4:532~1500, ipv6: 1280~1500

       --crypto
              ip frame crypto 'xor' or 'arc4' or 'none' default is 'xor'

       --crypto-key-update-interval crypto key  update  interval,  'hour'  or  'minute'  or  none
              default is 'none'

       --multi-index-type
              'simple-fault-tolerant'    or    'simple-load-balance'   or   'full'   default   is
              'simple-load-balance'

       --multi-forward-type
              'simple-fault-tolerant' or 'simple-load-balance' default is 'simple-fault-tolerant'

       --socket-if-name
              example: 'eth0', 'eno1', only for unix-like os

       --address-secure
              hide part of ip address in logs 'on' or 'off' default is 'on'

       --if-dump
              dump the interface data frame 'on' or 'off' default is 'off'

       --pf-route
              packet filter route

       --multi-socket
              'on' or 'off' default is 'off'

       --direct-forwarding
              'on' or 'off' default is 'on'

       --set-tun
              'on' or 'off' default is 'on'

       --index-worker
              'on' or 'off' default is 'on'

       --index-service-worker
              'on' or 'off' default is 'on'

       --node-detect-worker
              'on' or 'off' default is 'on'

       --set-fwdu0
              'on' or 'off' default is 'on'

       --pid-file
              pid file

       --node-cache-file
              node address cache file

       --log-file-path
              log file path

       --log-udp4
              send log to the address ipv4 default is '127.0.0.1:9000'

       --log-udp-type
              log udp type 'binary' or 'text' default is 'binary'

       --console-log-level
              log console level 0-3

       --file-log-level
              log file level    0-3

       --udp-log-level
              log udp level     0-3

       --core-log-level
              core log level           0-3

       --pf-log-level
              packet filter log level  0-3

       --main-log-level
              main log level           0-3

       --node-log-level
              node log level           0-3

       --index-log-level
              index log level          0-3

       --index-service-log-level
              index service log level  0-3

       --node-detect-log-level
              node detect log level    0-3

       --help

Example:

       ./gnb -i gnbtun -c $node_conf_dir -e "--upnp"

       ./gnb -P

       ./gnb -P --console-log-level=3 --index-service-log-level=3

       ./gnb -n 1001 -I '$public_index_ip/$port' -p $passcode

       ./gnb -n 1002 -I '$public_index_ip/$port' -p $passcode

       ./gnb -n 1001 -a 'i/0/$public_index_ip/$port' -p $passcode

       ./gnb -n 1002 -a 'i/0/$public_index_ip/$port' -p $passcode

SEE ALSO

       gnb_crypto(1), gnb_ctl(8), gnb_es(8)

HOMEPAGE

       Source Code and Documentation at https://github.com/gnbdev/opengnb

COPYRIGHT

       Copyright © 2019-2022 gnbdev<gnbdev@qq.com>