Provided by: ibacm_44.0-2_amd64 bug

NAME

       ibacm - address and route resolution services for InfiniBand.

SYNOPSIS

       ibacm [-D] [-P] [-A addr_file] [-O option_file]

DESCRIPTION

       The  IB  ACM  implements  and  provides  a  framework  for name, address, and route (path)
       resolution  services  over  InfiniBand.   It  is  intended  to  address  connection  setup
       scalability  issues  running  MPI  applications  on  large  clusters.  The IB ACM provides
       information needed to establish a connection, but does not implement the CM protocol.

       A primary user of the ibacm service is the librdmacm library.  This  enables  applications
       to  make  use  of  the  ibacm service without code changes or needing to be aware that the
       service is in use.  librdmacm versions 1.0.12 - 1.0.15 can invoke  IB  ACM  services  when
       built  using  the  --with-ib_acm  option.   Version  1.0.16  and  newer  of librdmacm will
       automatically use the IB ACM if it is installed.  The IB ACM services  tie  in  under  the
       rdma_resolve_addr,   rdma_resolve_route,   and  rdma_getaddrinfo  routines.   For  maximum
       benefit, the rdma_getaddrinfo routine should be used, however existing applications should
       still  see  significant connection scaling benefits using the calls available in librdmacm
       1.0.11 and previous releases.

       The IB ACM is focused on being scalable,  efficient,  and  extensible.   It  implements  a
       plugin architecture that allows a vendor to supply its proprietary provider in addition to
       the default provider.  The current default provider implementation ibacmp  limits  network
       traffic,  SA  interactions, and centralized services.  Ibacmp supports multiple resolution
       protocols in order to handle different fabric topologies.

       The IB ACM package is comprised of three components: the ibacm core service,  the  default
       provider ibacmp shared library, and a test/configuration utility - ib_acme.  All three are
       userspace components and are available for Linux.  Additional details are given below.

OPTIONS

       -D     run in daemon mode (default)

       -P     run as standard process

       -A addr_file
              address configuration file

       -O option_file
              option configuration file

       --systemd
              Enable systemd  integration.  This  includes  optional  socket  activation  of  the
              daemon's listening socket.

QUICK START GUIDE

       1.  Prerequisites:  libibverbs  and  libibumad  must be installed.  The IB stack should be
       running with IPoIB configured.  These  steps  assume  that  the  user  has  administrative
       privileges.

       2. Install the IB ACM package.  This installs ibacm, ibacmp, ib_acme, and init.d scripts.

       3. Run 'ibacm' as administrator to start the ibacm daemon.

       4. Optionally, run 'ib_acme -d <dest_ip> -v' to verify that the ibacm service is running.

       5.  Install  librdmacm, using the build option --with-ib_acm if needed.  This build option
       is not needed with librdmacm 1.0.17 or newer.  The librdmacm will  automatically  use  the
       ibacm service.  On failures, the librdmacm will fall back to normal resolution.

       6.  You can use ib_acme -P to gather performance statistics from the local ibacm daemon to
       see if the service is working correctly.  Similarly, the command ib_acme -e could be  used
       to enumerate all endpoints created by the local ibacm service.

NOTES

       ib_acme:

       The  ib_acme program serves a dual role.  It acts as a utility to test ibacm operation and
       help verify if the ibacm service and selected protocol  is  usable  for  a  given  cluster
       configuration.    Additionally,  it  automatically  generates ibacm configuration files to
       assist with or eliminate manual setup.

       ibacm configuration files:

       The ibacm service relies on two configuration files.

       The ibacm_addr.cfg file contains name and address mappings  for  each  IB  <device,  port,
       pkey>  endpoint.   Although  the names in the ibacm_addr.cfg file can be anything, ib_acme
       maps the host name to the IB endpoints.  IP addresses, on the  other  hand,  are  assigned
       dynamically.   If  the  address  file  cannot  be found, the ibacm service will attempt to
       create one using default values.

       The ibacm_opts.cfg file provides a set of configurable options for the ibacm core  service
       and  default  provider,  such  as timeout, number of retries, logging level, etc.  ib_acme
       generates the ibacm_opts.cfg file using static information.  If an option file  cannot  be
       found, ibacm will use default values.

       ibacm:

       The  ibacm  service  is  responsible  for resolving names and addresses to InfiniBand path
       information and caching such data.  It should execute with administrative privileges.

       The ibacm implements a client interface over TCP  sockets,  which  is  abstracted  by  the
       librdmacm  library.  One or more providers can be loaded by the core service, depending on
       the configuration.  In the default provider ibacmp, one or  more  back-end  protocols  are
       used  to  satisfy user requests.  Although ibacmp supports standard SA path record queries
       on the back-end, it also supports a resolution protocol based on multicast  traffic.   The
       latter  is  not  usable  on  all  fabric  topologies,  specifically ones that may not have
       reversible paths or fabrics using torus routing.  Users should use the ib_acme utility  to
       verify that multicast protocol is usable before running other applications.

       Conceptually,  the default provider ibacmp implements an ARP like protocol and either uses
       IB multicast records to construct path record data or queries the SA  directly,  depending
       on  the  selected route protocol.  By default, the ibacmp provider uses and caches SA path
       record queries.

       Specifically, all IB endpoints join a number of multicast groups.  Multicast groups differ
       based  on  rates, mtu, sl, etc., and are prioritized.  All participating endpoints must be
       able to communicate on the lowest priority multicast group.  The  ibacmp  assigns  one  or
       more  names/addresses  to each IB endpoint using the ibacm_addr.cfg file.  Clients provide
       source and destination names or addresses as input to the service, and receive  as  output
       path record data.

       The  service  maps  a  client's  source  name/address  to  a  local  IB  endpoint.  If the
       destination name/address is not cached  locally  in  the  default  provider,  it  sends  a
       multicast  request  out on the lowest priority multicast group on the local endpoint.  The
       request carries a list of multicast groups that the sender can use.  The recipient of  the
       request  selects  the highest priority multicast group that it can use as well and returns
       that information directly to the sender.  The request data is cached by all endpoints that
       receive  the  multicast request message.  The source endpoint also caches the response and
       uses the multicast group that was selected to construct or obtain path record data,  which
       is returned to the client.

       The current implementation of the provider ibacmp has several additional restrictions:

       -  The  ibacmp  is  limited in its handling of dynamic changes.  ibacm must be stopped and
       restarted if a cluster is reconfigured.

       - Support for IPv6 has not been verified.

       - The number of multicast groups that an endpoint can support is limited to 2.

       The ibacmp contains several internal  caches.   These  include  caches  for  GID  and  LID
       destination  addresses.   These  caches  can  be  optionally preloaded. ibacm supports the
       OpenSM dump_pr plugin "full" PathRecord format which is used to preload these caches.  The
       file  format  is  specified in the ibacm_opts.cfg file via the route_preload setting which
       should be set to full_opensm_v1 for this file format.  Default format is none  which  does
       not  preload  these  caches.  See dump_pr.notes.txt in dump_pr for more information on the
       full_opensm_v1 file format and how to configure OpenSM to generate this file.

       Additionally, the  name,  IPv4,  and  IPv6  caches  can  be  be  preloaded  by  using  the
       addr_preload  option.  The default is none which does not preload these caches. To preload
       these caches, set this option to acm_hosts and configure the addr_data_file appropriately.

SEE ALSO

       ibacm(7), ib_acme(1), rdma_cm(7)