Provided by: ipmiutil_3.1.8-4_amd64 bug

NAME

       ipmiutil_picmg - send specific PICMG extended IPMI commands

SYNOPSIS

       ipmiutil picmg [-mixNUPREFJTVY] parameters

DESCRIPTION

       This  ipmiutil  picmg  subcommand  sends specific PICMG/ATCA extended IPMI commands to the
       firmware.

       This utility can use either the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver  from
       Intel,  the  /dev/ipmikcs  driver  from  valinux,  direct  user-space IOs, or the IPMI LAN
       interface if -N.

OPTIONS

       Command line options are described below.

       -i 00  This option specifies a specific FRU ID to show.  The input value should be in  hex
              (0b,  1a,  etc.),  as shown from the sensor SDR output.  The default FRU ID is zero
              (0).

       -m 002000
              Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00).  This could  be  used  for
              PICMG  or  ATCA  blade  systems.  The trailing character, if present, indicates SMI
              addressing if 's', or IPMB addressing if 'i' or not present.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename or IP address of the remote target system.  If a  nodename  is  specified,
              IPMI  LAN  interface  is  used.  Otherwise the local system management interface is
              used.

       -U rmt_user
              Remote username for the nodename given.  The default is a null username.

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is a null password.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force the driver type to one of the followng: imb, va,  open,  gnu,  landesk,  lan,
              lan2,  lan2i, kcs, smb.  Note that lan2i means lan2 with intelplus.  The default is
              to detect any available driver type and use it.

       -J     Use  the  specified  LanPlus  cipher   suite   (0   thru   17):   0=none/none/none,
              1=sha1/none/none,   2=sha1/sha1/none,   3=sha1/sha1/cbc128,   4=sha1/sha1/xrc4_128,
              5=sha1/sha1/xrc4_40, 6=md5/none/none, ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use a specified IPMI LAN Authentication  Type:  0=None,  1=MD2,  2=MD5,  4=Straight
              Password, 5=OEM.

       -V     Use  a  specified  IPMI  LAN  privilege  level.  1=Callback  level,  2=User  level,
              3=Operator level, 4=Administrator level (default), 5=OEM level.

       -Y     Yes, do prompt the user for the IPMI LAN remote  password.   Alternatives  for  the
              password are -E or -P.

PARAMETERS

       picmg parameters

              properties
                     Get PICMG properties may be used to obtain and print Extension major version
                     information, PICMG identifier, FRU Device ID and Max FRU Device ID.

              addrinfo

                     Get address  information.   This  command  may  return  information  on  the
                     Hardware  address,  IPMB-0  Address, FRU ID, Site/Entity ID, and Site/Entity
                     Type.

              frucontrol fru id options

                     Set various control options:

                     0x00      - Cold Reset

                     0x01      - Warm Reset

                     0x02      - Graceful Reboot

                     0x03      - Issue Diagnostic Interrupt

                     0x04      - Quiesce [AMC only]

                     0x05-0xFF - Cold Reset

              activate fru id

                     Activate the specified FRU.

              deactivate fru id

                     Deactivate the specified FRU.

              policy get fru id

                     Get FRU activation policy.

              policy set fru id lockmask lock

                     Set FRU activation policy.  lockmask is 1 or 0 to  indicate  action  on  the
                     deactivation  or  activation  locked  bit  respectively.   lock is 1 or 0 to
                     set/clear locked bit.

              portstate set|getall|getgranted|getdenied parameters

                     Get or set various port states.  See usage for parameter details.

EXAMPLES

       ipmiutil picmg properties
       Gets PICMG properties from the default target address (slave address 0x20).

       ipmiutil picmg -N 192.168.1.1 -U root -P pswd addrinfo
       Gets PICMG Address Information from the specified IP address.

SEE ALSO

       ipmiutil(8) ialarms(8) iconfig(8) idiscover(8) ievents(8) ifru(8) igetevent(8)  ihealth(8)
       ilan(8) ireset(8) isel(8) isensor(8) iserial(8) isol(8) iwdt(8)

WARNINGS

       See  http://ipmiutil.sourceforge.net/  for  the latest version of ipmiutil and any bug fix
       list.

COPYRIGHT

       Copyright (C) 2010  Kontron America, Inc.

       See the file COPYING in the distribution for more details regarding redistribution.

       This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                                     Version 1.0: 04 Jun 2010                           IPICMG(8)