Provided by: lirc_0.10.1-7.2_amd64 bug

NAME

       lircd-uinput - Forward lirc button presses as uinput events

SYNOPSIS

       lircd-uinput [options]... [lircd output socket]
       lircd-uinput [options]... [file]

DESCRIPTION

       lircd-uinput  reads  decoded button press events from a lircd(8) output socket and injects
       these as key events to the kernel uinput device.  The kernel makes these events  available
       to other applications on a /dev/input/event device, just as for regular input hardware.

       lircd-uinput is designed to run as a systemd service.

       The  lircd  output  socket  argument  is  an optional path to the lircd output socket.  It
       defaults to the output value in the [lircd]  section  of  the  lirc_options  config  file,
       falling back to /var/run/lirc/lircd.

       If a plain file is given instead of a socket it is supposed to contain button press events
       formatted as documented in lircd(8) .  lircd-uinput will in this case send  the  codes  in
       this file and exit.

       In order to work, release events must be sent to the uinput device.  See REPEAT HANDLING.

       lircd-uinput  can  only  handle  button  events  named using the official namespace i. e.,
       buttons known to the kernel. See NOTES.

       Unless the /dev/uinput default permissions are changed lirc-uinput needs to run  as  root.
       See NOTES.

       The  /dev/input/event  device  created  by  the kernel can be tricky to locate, and is not
       stable.  See NOTES.

OPTIONS

       -u --uinput <device>
              uinput kernel device, defaults to /dev/uinput.

       -r --release-suffix <suffix>
              lircd-uinput generates different events depending on if the button name  ends  with
              the release-suffix or not.  Defaults to _EVUP . See REPEAT HANDLING

       -R --repeat <delay[,period] | ,period>
              Set  kernel autorepeat parameters of the created /dev/input/event device.  delay is
              the time before repeating a key event, period is  the  time  between  repeated  key
              events.   Both values are in milliseconds, separated by a comma.  Any  value can be
              omitted or set to 0 in which case the kernel/system defaults are used.  See  REPEAT
              HANDLING.

       -a --add-release-events
              Generate  synthetic release events.  This option is mandatory unless lircd is using
              the deprecated --release option.  The  timeout  used  can  be  modified  using  the
              release-timeout  key  in  the  lircd-uinput  section of the lirc_options.conf file.
              Useless if used with a text file as input.  . See REPEAT HANDLING

       -d --disabled <disabled buttons file path>
              The path of a file which contains name of buttons to be disabled, one per line.  By
              default, lircd-uinput sends all buttons found in input.  See NOTES.

       -O --options-file <path>
              Options file holding default values. Defaults to /etc/lircd/lirc_options.conf

       -L, --logfile <logfile path>
              Select the log file, either the string 'syslog' indicating that syslog(1) should be
              used or a log file path.  The default is to use syslog.

       -D, --loglevel [level]
              Determine the amount of logging information.  level can be a symbolic syslog level:
              'error','warning,  'info',  'notice'  or  ´debug'.  lircd-uinput also defines three
              additional levels 'trace', 'trace1' and 'trace2' which  gives  even  more  messages
              ('trace2'  bringing  the  most).   However, in the log these messages are marked as
              'debug'.

       -h --help
              Display usage summary.

       -v --version
              Display version info.

REPEAT HANDLING

       After receiving a  keypress  event  the  kernel  will  start  emitting  repeat  events  to
       applications  until  lircd-uinput emits a corresponding release event.  The release events
       could be created by lircd(8) using the deprecated --release option.  Such events typically
       has an _EVUP suffix appended to the original keypress event.

       The  preferred  way  is  that lircd-uinput creates release events using the --add-release-
       events option.  Combining both of these options might give unexpected results.

       Note that the linux kernel uses the suffix _UP (which was used py lircd prior  to  0.10.0)
       for other purposes since 4.7.

       In  any  case, the repeat events generated by the kernel can be tweaked using the --repeat
       option. This can set the time between the keypress event and the first  repeat  event  and
       the  time  between each repeat event.  The --repeat option should only be used if no other
       program or udev rule is automatically setting up key repeat  parameters.   By  design  the
       repeat  parameters  can't be set in an atomic way during input device registration so this
       option is prone to race conditions.

       Note that the lircd-uinput repeat-event handling differs from lircd(8)  which   implements
       (emulates)  hardware  autorepeat  in the events sent to uinput (event.value == 2).  lircd-
       uinput only sends keypress and release events, trusting the kernel autorepeat support.

NOTES

       By default, the dev/uinput device is not writable for regular  users.   Thus  lircd-uinput
       needs to run as root unless these permissions are changed.

       One  way  to achieve this is an udev rule.  The lirc distribution contains an example rule
       which makes the lircd-uinput device writable for users in the group lirc.  Another way  is
       to  use  lircd-setup(8)  to  change the permissions. As distributed, the lirc_options.conf
       file contains an commented example using setfacl(1) .

       lircd-uinput can only forward lircd button events with  names  from  the  legal  namespace
       defined  by  the  kernel.   A  complete  list  of  possible  button names  is available in
       /usr/include/linux/input-event-codes.h and also using irrecord -l .   Other  button  names
       are silently dropped.

       The  event  keycode  depends  on the name that was given a button in the lircd config file
       e.g., if the button is named KEY_1 the keycode 1 will be generated.

       The kernel makes the events generated by lircd-uinput available  on  a  /dev/input  device
       like  /dev/input/event12.   This  device  name  is not stable and typically varies after a
       reboot.  The lirc distribution contains a udev rule which if installed  creates  a  device
       link named /dev/lircd-uinput which always can be used.

       lircd-uinput  is designed to replace the currently deprecated --uinput option to lircd(8).
       However, lircd-uinput forwards all events unless blocked by the --disabled option.  On the
       other  hand,  lircd  --uinput  does  not forward all events - the heuristics used has been
       changed over versions.

BUGS

       Since the device name is fixed, only one instance of lircd-uinput can run on a system.

SEE ALSO

       lircd(8)
       irrecord(1)
       http://www.kernel.org/doc/Documentation/input/event-codes.txt