Provided by: lldpad_1.1+git20221028.aa18720-1_amd64 bug

NAME

       lldptool - manage the LLDP settings and status of lldpad

SYNOPSIS

       lldptool <command> [options] [argument]

DESCRIPTION

       lldptool  is  used  to query and configure lldpad.  It connects to the client interface of
       lldpad to perform these operations.  lldptool will operate in interactive mode  if  it  is
       executed  without a command.  In interactive mode, lldptool will also function as an event
       listener to print out events as they are received asynchronously from lldpad.  It will use
       libreadline for interactive input when available.

OPTIONS

       -i [ifname]
              specifies  the  network  interface  to  which  the  command applies.  Most lldptool
              commands require specifying a network interface.

       -V [tlvid]
              specifies the TLV identifier
              The tlvid is an integer value used to identify specific LLDP TLVs.  The tlvid value
              is  the Type value for types not equal to 127 (the organizationally specific type).
              For organizationally specific TLVs, the tlvid is the value  represented  by  the  3
              byte  OUI  and  1  byte subtype - where the subtype is the lowest order byte of the
              tlvid.
              The tlvid can be entered as a numerical value (e.g. 10 or 0xa),  or  for  supported
              TLVs,  as  a keyword.  Review the lldptool help output to see the list of supported
              TLV keywords.

       -n     "neighbor" option for commands which can use it (e.g. get-tlv)

       -g [bridge scope]
              specify the bridge scope this command operates on. Allows one to set and query  all
              LLDP  TLV  modules  for  "nearest_bridge"  (short: "nb"), "nearest_customer_bridge"
              ("ncb")   and   "nearest_nontpmr_bridge"   ("nntpmrb")   group    mac    addresses.
              Configurations  are  saved  into independent sections in lldpad.conf.  If no bridge
              scope is supplied this defaults  to  "nearest  bridge"  to  preserve  the  previous
              behaviour.

       -c <argument list>
              "config"  option for TLV queries. Indicates that the query is for the configuration
              elements for the specified TLV.  The argument list specifies the specific  elements
              to  query.  If no arguments are listed, then all configuration elements for the TLV
              are returned.

       -r     show raw client interface messages

       -R     show only raw Client interface messages

COMMANDS

       license
              show license information

       -h, help
              show usage information

       -v, version
              show version information

       -S, stats
              get LLDP statistics for the specified interface

       -t, get-tlv
              get TLV information for the specified interface

       -T, set-tlv
              set TLV information for the specified interface

       -l, get-lldp
              get LLDP parameters for the specified interface

       -L, set-lldp
              set LLDP parameters for the specified interface

       -p, ping
              display the process identifier of the running lldpad process

       -q, quit
              exit from interactive mode

ARGUMENTS

       This section lists arguments which are available for administration  of  LLDP  parameters.
       Arguments  for  basic  TLV's (non-organizationally specific TLVs) are also described.  See
       the SEE ALSO section for references to  other  lldptool  man  pages  which  contain  usage
       details and arguments for various organizationally specific TLVs.

       adminStatus
              Argument  for  the  get-lldp/set-lldp  commands.   Configures  the LLDP adminStatus
              parameter for the specified interface.  Valid values are: disabled, rx, tx, rxtx

       enableTx
              Argument for the get-tlv/set-tlv commands.  May be  applied  per  interface  for  a
              specified  TLV.  Valid values are: yes, no.  If the DCBX TLV enableTx is set to no,
              then all of the DCB feature TLVs DCBX advertise settings  will  be  turned  off  as
              well.  Setting enableTx to yes will enable the DCBX advertise settings.

       ipv4   Argument  for  the  get-tlv/set-tlv commands with respect to the Management Address
              TLV.  The get command will retrieve the configured value.  Set values take the form
              of an IPv4 address: A.B.C.D

       ipv6   Argument  for  the  get-tlv/set-tlv commands with respect to the Management Address
              TLV.  The get command will retrieve the configured value.  Set values take the form
              of  an  IPv6 address: 1111:2222:3333:4444:5555:6666:7777:8888 and various shorthand
              variations.

EXAMPLES

       Configure LLDP adminStatus to Receive and Transmit for interface eth2
              lldptool -L -i eth2 adminStatus=rxtx
              lldptool set-lldp -i eth2 adminStatus=rxtx

       Query the LLDP adminStatus for interface eth3
              lldptool -l -i eth3 adminStatus
              lldptool get-lldp -i eth3 adminStatus

       Query the LLDP statistics for interface eth3
              lldptool -S -i eth3
              lldptool stats -i eth3

       Query the local TLVs which are being transmitted for a given interface:
              lldptool -t -i eth3
              lldptool get-tlv -i eth3

       Query the received neighbor TLVs received on a given interface:
              lldptool -t -n -i eth3
              lldptool get-tlv -n -i eth3

       Query the value of the System Description TLV as received from the  neighbor  on  a  given
       interface:
              lldptool -t -n -i eth3 -V sysDesc
              lldptool get-tlv -n -i eth3 -V 6

       Disable transmit of the IEEE 802.3 MAC/PHY Configuration Status TLV for a given interface:
              lldptool -T -i eth3 -V macPhyCfg enableTx=no
              lldptool set-tlv -i eth3 -V 0x120f01 enableTx=no

       Query value of the transmit setting for the Port Description TLV for a given interface:
              lldptool -t -i eth3 -V portDesc -c enableTx
              lldptool get-tlv -i eth3 -V 4 -c enableTx

       Set a Management Address TLV on eth3 to carry IPv4 address 192.168.10.10
              lldptool -T -i eth3 -V mngAddr ipv4=192.168.10.10

       Set a Management Address TLV on eth3 to carry IPv6 address ::192.168.10.10
              lldptool -T -i eth3 -V mngAddr ipv6=::192.168.10.10

       Get the configured IPv4 address for the Management Address TLV on eth3
              lldptool -t -i eth3 -V mngAddr -c ipv4

       Get all configured attributes for the Management Address TLV on eth3
              lldptool -t -i eth3 -V mngAddr -c

       Enable transmit of the Edge Virtual Bridging TLV for interface eth4
              lldptool -i eth4 -T -g ncb -V evbCfg enableTx=yes

       Enable transmit of VDP for interface eth4
              lldptool -i eth4 -T -V vdp enableTx=yes

       Display process identifier of lldpad
              lldptool -p

SEE ALSO

       lldptool-dcbx(8),   lldptool-ets(8),  lldptool-pfc(8),  lldptool-app(8),  lldptool-med(8),
       lldptool-vdp(8), lldptool-evb(8), lldptool-evb22(8), dcbtool(8), lldpad(8)

COPYRIGHT

       lldptool - LLDP agent configuration utility
       Copyright(c) 2007-2012 Intel Corporation.   Portions of lldptool are based on:

       hostapd-0.5.7

       Copyright
              (c) 2004-2008, Jouni Malinen <j@w1.fi>

LICENSE

       This program is free software; you can redistribute it and/or modify it  under  the  terms
       and  conditions  of  the  GNU  General Public License, version 2, as published by the Free
       Software Foundation.

       This program is distributed in the hope it will  be  useful,  but  WITHOUT  ANY  WARRANTY;
       without  even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program;
       if not, write to the Free Software Foundation, Inc., 51 Franklin St - Fifth Floor, Boston,
       MA 02110-1301 USA.

       The full GNU General Public License is included in this distribution in  the  file  called
       "COPYING".

SUPPORT

       Contact Information: open-lldp Mailing List <lldp-devel@open-lldp.org>