Provided by: luksmeta_9-4_amd64 bug

NAME

       luksmeta - Utility for storing metadata in a LUKSv1 header

SYNOPSIS

       luksmeta test -d DEVICE

       luksmeta nuke -d DEVICE [-f]

       luksmeta init -d DEVICE [-f] [-n]

       luksmeta show -d DEVICE [-s SLOT]

       luksmeta save -d DEVICE [-s SLOT]  -u UUID  < DATA

       luksmeta load -d DEVICE  -s SLOT  [-u UUID] > DATA

       luksmeta wipe -d DEVICE  -s SLOT  [-u UUID] [-f]

OVERVIEW

       The luksmeta utility enables an administrator to store metadata in the gap between the end
       of the LUKSv1 header and the start of the encrypted data. This is useful for storing data
       that is available before the volume is unlocked, usually for use during the volume unlock
       process.

       The metadata is stored in a series of UUID-typed slots, allowing multiple blocks of
       metadata. Although the luksmeta slots are inspired by the LUKS slots, they are
       functionally independent and share only a casual relationship. Slots merely provide a hint
       that a given chunk of metadata is associated with a specific LUKSv1 password (in a slot
       with the same number). However, luksmeta itself is indifferent to the relationship between
       a LUKSv1 slot and the correspondly numbered luksmeta slot, with one exception (detailed
       below).

       After a LUKSv1 volume is initialized using cryptsetup(8), it must also be initialized for
       metadata storage by luksmeta init. Once this is complete, the device is ready to store
       medata.

       Data can be written to a slot using luksmeta save or read from a slot using luksmeta load.
       You can also erase the data in an existing slot using luksmeta wipe or query the slots
       using luksmeta show.

UUID GENERATION

       It is often presumed that saving metadata to a slot requires a specific UUID or that there
       is an official registry of UUID types. This is incorrect.

       UUID stands for Universally Unique IDentifier. UUIDs are a standardized, widely-used data
       type used for identification without a central registry. For the relevant standards, see
       ISO 9834-8:2005 and RFC 4122.

       UUIDs are large enough that collision is practically impossible. So if your application
       wants to store data in a luksmeta slot, just generate your own UUID and use it
       consistently to refer to your type of data. If you have multiple types of data, feel free
       to generate multiple UUIDs.

       The easiest way to generate a UUID is to use uuidgen(1). However, any compliant UUID
       generator will suffice.

INITIALIZATION

       Before reading or writing metadata, the LUKSv1 block device must be initialized for
       metadata storage. Three commands help with this process: luksmeta test, luksmeta nuke and
       luksmeta init.

       The luksmeta test command simply checks an existing block device to see if it is
       initialized for metadata storage. This command does not provide any output, so be sure to
       check its return code (see below).

       The luksmeta nuke command will zero (erase) the entire LUKSv1 header gap. Since this
       operation is destructive, user confirmation will be required before clearing the gap
       unless the -f option is supplied.

       The luksmeta init command initializes the LUKSv1 block device for metadata storage. This
       process will wipe out any data in the LUKSv1 header gap. For this reason, this command
       will require user confirmation before any data is written unless the -f option is
       supplied. Note that this command succeeds without any modification if the device is
       already initialized. If you would like to force the creation of clean initialization
       state, you can specify the -n option to nuke the LUKSv1 header gap before initialization
       (but after user confirmation).

METADATA STATE

       The luksmeta show command displays the current state of slots on the LUKSv1 block device.
       If no slot is specified, it prints a table consisting of the slot number, the
       corresponding LUKSv1 slot state and the UUID of the data stored in the luksmeta slot (or
       "empty" if no data is stored). If a slot is specified, this command simply prints out the
       UUID of the data in the slot. If the slot does not contain data, it prints nothing.

MANAGING METADATA

       Managing the metadata in the slots is performed with three commands: luksmeta save,
       luksmeta load and luksmeta wipe. These commands write metadata to a slot, read metadata
       from a slot and erase metadata in a slot, respectively.

       The luksmeta save command reads metadata on standard input and writes it to the specified
       slot using the specified UUID. If no slot is specified, luksmeta will search for the first
       slot number for which the LUKSv1 slot is inactive and the luksmeta slot is empty. This
       represents the only official correlation between LUKSv1 slots and luksmeta slots. In this
       case, the metadata is written to the first applicable slot using the specified UUID and
       the slot number is printed to standard output. In either case, this command will never
       overwrite existing data. To replace data in a slot you will need to execute luksmeta wipe
       before luksmeta save.

       The luksmeta load command reads data from the specified slot and writes it to standard
       output. If a UUID is specified, the command will verify that the UUID associated with the
       metadata in the slot matches the specified UUID. This type check helps to ensure that you
       always receive the type of data you are expecting as output. If the UUIDs do not match,
       the command will fail.

       The luksmeta wipe command erases the data from the given slot. If a UUID is specified, the
       command will verify that the UUID associated with the metadata in the slot matches the
       specified UUID. This type check helps to ensure that you only erase the data you intended
       to erase. Because this is a destructive operation, this command will require user
       confirmation before any data is erased, unless the -f option is supplied. Note that this
       command succeeds if you attempt to wipe a slot that is already empty.

CAVEATS

       The amount of storage in the LUKSv1 header gap is extremely limited. It also varies based
       upon the configuration used by LUKSv1 at device initialization time. In some LUKSv1
       configurations, there is not even enough space for all the metadata slots even at the
       smallest possible slot size.

       During the design of this utility, we considered it likely that users would want to reduce
       the number of usable slots in exchange for more storage space in the slots used. In order
       to provide this flexibility, the amount of storage available per-slot is dynamic. Put
       simply, slots are not a fixed size. This means that it is possible (and even somewhat
       likely) to encounter an error during luksmeta save indicating that there is insufficient
       space.

       This error is not a programming bug. If you encounter this error it likely means that
       either all space is being consumed by the already-written slots or that the metadata you
       are attempting to write simply does not fit.

       You can attempt to resolve this problem by calling luksmeta wipe on slots that are no
       longer in use. This will release the storage space for use by other slots. Note that
       luksmeta does not, however, currently perform defragmentation since the number of usable
       blocks is rather limited. You can attempt to manually get around this by extracting all
       slot data, wiping the slots and reloading them in order. However, this operation is
       potentially dangerous and should be undertaken with great care.

OPTIONS

-d DEVICE, --device=DEVICE : The device on which to perform the operation.

       •   -s SLOT, --slot=SLOT : The slot number on which to perform the operation.

       •   -u UUID, --uuid=UUID : The UUID to associate with the operation.

       •   -f, --force : Forcibly suppress all user prompting.

RETURN VALUES

       This command uses the return values as defined by sysexit.h. The following are general
       errors whose meaning is shared by all luksmeta commands:

       •   EX_OK        : The operation was successful.

       •   EX_OSERR     : An undefined operating system error occurred.

       •   EX_USAGE     : The program was called with invalid parameters.

       •   EX_IOERR     : An IO error occurred when writing to the device.

       •   EX_OSFILE    : The device is not initialized or is corrupted.

       •   EX_NOPERM    : The user did not grant permission during confirmation.

       •   EX_NOINPUT   : An error occurred while reading from standard input.

       •   EX_DATAERR   : The specified UUID does not match the slot UUID.

       •   EX_CANTCREAT : There is insufficient space in LUKSv1 header.

       Additionally, luksmeta save will return EX_UNAVAILABLE when you attempt to save data into
       a slot that is already used. Likewise, luksmeta load will return EX_UNAVAILABLE when you
       attempt to read from an empty slot.

EXAMPLES

       Destroy all data (including LUKSMeta data) in the LUKSv1 header gap and initialize the gap
       for LUKSMeta storage:

           $ luksmeta init -n -f -d /dev/sdz

       If already initialized, do nothing. Otherwise, destroy all non-LUKSMeta data in the LUKSv1
       header gap and initialize the gap for LUKSMeta storage:

           $ luksmeta init -f -d /dev/sdz

       Write some data to a slot:

           $ UUID=*uuidgen*
           $ echo $UUID
           31c25e3b-b8e2-4eaa-a427-23aa882feef2
           $ echo "Hello, World" | luksmeta save -d /dev/sdz -s 0 -u $UUID

       Read the data back:

           $ luksmeta load -d /dev/sdz -s 0 -u $UUID
           Hello, World

       Wipe the data from the slot:

           $ luksmeta wipe -d /dev/sdz -s 0 -u $UUID

       Erase all trace of LUKSMeta:

           $ luksmeta nuke -f -d /dev/sdz

AUTHOR

       Nathaniel McCallum npmccallum@redhat.com

SEE ALSO

       cryptsetup(8), uuidgen(1)

                                                                                      LUKSMETA(8)