Provided by: nftables_1.0.6-2_amd64 bug

NAME

       nft - Administration tool of the nftables framework for packet filtering and
       classification

SYNOPSIS

       nft [ -nNscaeSupyjtT ] [ -I directory ] [ -f filename | -i | cmd ...]
       nft -h
       nft -v

DESCRIPTION

       nft is the command line tool used to set up, maintain and inspect packet filtering and
       classification rules in the Linux kernel, in the nftables framework. The Linux kernel
       subsystem is known as nf_tables, and ‘nf’ stands for Netfilter.

OPTIONS

       The command accepts several different options which are documented here in groups for
       better understanding of their meaning. You can get information about options by running
       nft --help.

       General options:

       -h, --help
           Show help message and all options.

       -v, --version
           Show version.

       -V
           Show long version information, including compile-time configuration.

       Ruleset input handling options that specify to how to load rulesets:

       -f, --file filename
           Read input from filename. If filename is -, read from stdin.

       -D, --define name=value
           Define a variable. You can only combine this option with -f.

       -i, --interactive
           Read input from an interactive readline CLI. You can use quit to exit, or use the EOF
           marker, normally this is CTRL-D.

       -I, --includepath directory
           Add the directory directory to the list of directories to be searched for included
           files. This option may be specified multiple times.

       -c, --check
           Check commands validity without actually applying the changes.

       -o, --optimize
           Optimize your ruleset. You can combine this option with -c to inspect the proposed
           optimizations.

       Ruleset list output formatting that modify the output of the list ruleset command:

       -a, --handle
           Show object handles in output.

       -s, --stateless
           Omit stateful information of rules and stateful objects.

       -t, --terse
           Omit contents of sets from output.

       -S, --service
           Translate ports to service names as defined by /etc/services.

       -N, --reversedns
           Translate IP address to names via reverse DNS lookup. This may slow down your listing
           since it generates network traffic.

       -u, --guid
           Translate numeric UID/GID to names as defined by /etc/passwd and /etc/group.

       -n, --numeric
           Print fully numerical output.

       -y, --numeric-priority
           Display base chain priority numerically.

       -p, --numeric-protocol
           Display layer 4 protocol numerically.

       -T, --numeric-time
           Show time, day and hour values in numeric format.

       Command output formatting:

       -e, --echo
           When inserting items into the ruleset using add, insert or replace commands, print
           notifications just like nft monitor.

       -j, --json
           Format output in JSON. See libnftables-json(5) for a schema description.

       -d, --debug level
           Enable debugging output. The debug level can be any of scanner, parser, eval, netlink,
           mnl, proto-ctx, segtree, all. You can combine more than one by separating by the ,
           symbol, for example -d eval,mnl.

INPUT FILE FORMATS

   LEXICAL CONVENTIONS
       Input is parsed line-wise. When the last character of a line, just before the newline
       character, is a non-quoted backslash (\), the next line is treated as a continuation.
       Multiple commands on the same line can be separated using a semicolon (;).

       A hash sign (#) begins a comment. All following characters on the same line are ignored.

       Identifiers begin with an alphabetic character (a-z,A-Z), followed by zero or more
       alphanumeric characters (a-z,A-Z,0-9) and the characters slash (/), backslash (\),
       underscore (_) and dot (.). Identifiers using different characters or clashing with a
       keyword need to be enclosed in double quotes (").

   INCLUDE FILES
           include filename

       Other files can be included by using the include statement. The directories to be searched
       for include files can be specified using the -I/--includepath option. You can override
       this behaviour either by prepending ‘./’ to your path to force inclusion of files located
       in the current working directory (i.e. relative path) or / for file location expressed as
       an absolute path.

       If -I/--includepath is not specified, then nft relies on the default directory that is
       specified at compile time. You can retrieve this default directory via the -h/--help
       option.

       Include statements support the usual shell wildcard symbols (,?,[]). Having no matches for
       an include statement is not an error, if wildcard symbols are used in the include
       statement. This allows having potentially empty include directories for statements like
       include "/etc/firewall/rules/". The wildcard matches are loaded in alphabetical order.
       Files beginning with dot (.) are not matched by include statements.

   SYMBOLIC VARIABLES
           define variable = expr
           undefine variable
           redefine variable = expr
           $variable

       Symbolic variables can be defined using the define statement. Variable references are
       expressions and can be used to initialize other variables. The scope of a definition is
       the current block and all blocks contained within. Symbolic variables can be undefined
       using the undefine statement, and modified using the redefine statement.

       Using symbolic variables.

           define int_if1 = eth0
           define int_if2 = eth1
           define int_ifs = { $int_if1, $int_if2 }
           redefine int_if2 = wlan0
           undefine int_if2

           filter input iif $int_ifs accept

ADDRESS FAMILIES

       Address families determine the type of packets which are processed. For each address
       family, the kernel contains so called hooks at specific stages of the packet processing
       paths, which invoke nftables if rules for these hooks exist.

       ip       IPv4 address family.

       ip6      IPv6 address family.

       inet     Internet (IPv4/IPv6) address
                family.

       arp      ARP address family, handling
                IPv4 ARP packets.

       bridge   Bridge address family, handling
                packets which traverse a bridge
                device.

       netdev   Netdev address family, handling
                packets on ingress and egress.

       All nftables objects exist in address family specific namespaces, therefore all
       identifiers include an address family. If an identifier is specified without an address
       family, the ip family is used by default.

   IPV4/IPV6/INET ADDRESS FAMILIES
       The IPv4/IPv6/Inet address families handle IPv4, IPv6 or both types of packets. They
       contain five hooks at different packet processing stages in the network stack.

       Table 1. IPv4/IPv6/Inet address family hooks
       ┌────────────┬──────────────────────────────────┐
       │HookDescription                      │
       ├────────────┼──────────────────────────────────┤
       │            │                                  │
       │prerouting  │ All packets entering the system  │
       │            │ are processed by the prerouting  │
       │            │ hook. It is invoked before the   │
       │            │ routing process and is used for  │
       │            │ early filtering or changing      │
       │            │ packet attributes that affect    │
       │            │ routing.                         │
       ├────────────┼──────────────────────────────────┤
       │            │                                  │
       │input       │ Packets delivered to the local   │
       │            │ system are processed by the      │
       │            │ input hook.                      │
       ├────────────┼──────────────────────────────────┤
       │            │                                  │
       │forward     │ Packets forwarded to a different │
       │            │ host are processed by the        │
       │            │ forward hook.                    │
       ├────────────┼──────────────────────────────────┤
       │            │                                  │
       │output      │ Packets sent by local processes  │
       │            │ are processed by the output      │
       │            │ hook.                            │
       ├────────────┼──────────────────────────────────┤
       │            │                                  │
       │postrouting │ All packets leaving the system   │
       │            │ are processed by the postrouting │
       │            │ hook.                            │
       ├────────────┼──────────────────────────────────┤
       │            │                                  │
       │ingress     │ All packets entering the system  │
       │            │ are processed by this hook. It   │
       │            │ is invoked before layer 3        │
       │            │ protocol handlers, hence before  │
       │            │ the prerouting hook, and it can  │
       │            │ be used for filtering and        │
       │            │ policing. Ingress is only        │
       │            │ available for Inet family (since │
       │            │ Linux kernel 5.10).              │
       └────────────┴──────────────────────────────────┘

   ARP ADDRESS FAMILY
       The ARP address family handles ARP packets received and sent by the system. It is commonly
       used to mangle ARP packets for clustering.

       Table 2. ARP address family hooks
       ┌───────┬──────────────────────────────────┐
       │HookDescription                      │
       ├───────┼──────────────────────────────────┤
       │       │                                  │
       │input  │ Packets delivered to the local   │
       │       │ system are processed by the      │
       │       │ input hook.                      │
       ├───────┼──────────────────────────────────┤
       │       │                                  │
       │output │ Packets send by the local system │
       │       │ are processed by the output      │
       │       │ hook.                            │
       └───────┴──────────────────────────────────┘

   BRIDGE ADDRESS FAMILY
       The bridge address family handles Ethernet packets traversing bridge devices.

       The list of supported hooks is identical to IPv4/IPv6/Inet address families above.

   NETDEV ADDRESS FAMILY
       The Netdev address family handles packets from the device ingress and egress path. This
       family allows you to filter packets of any ethertype such as ARP, VLAN 802.1q, VLAN
       802.1ad (Q-in-Q) as well as IPv4 and IPv6 packets.

       Table 3. Netdev address family hooks
       ┌────────┬─────────────────────────────────┐
       │HookDescription                     │
       ├────────┼─────────────────────────────────┤
       │        │                                 │
       │ingress │ All packets entering the system │
       │        │ are processed by this hook. It  │
       │        │ is invoked after the network    │
       │        │ taps (ie. tcpdump), right after │
       │        │ tc ingress and before layer 3   │
       │        │ protocol handlers, it can be    │
       │        │ used for early filtering and    │
       │        │ policing.                       │
       ├────────┼─────────────────────────────────┤
       │        │                                 │
       │egress  │ All packets leaving the system  │
       │        │ are processed by this hook. It  │
       │        │ is invoked after layer 3        │
       │        │ protocol handlers and before tc │
       │        │ egress. It can be used for late │
       │        │ filtering and policing.         │
       └────────┴─────────────────────────────────┘

       Tunneled packets (such as vxlan) are processed by netdev family hooks both in decapsulated
       and encapsulated (tunneled) form. So a packet can be filtered on the overlay network as
       well as on the underlying network.

       Note that the order of netfilter and tc is mirrored on ingress versus egress. This ensures
       symmetry for NAT and other packet mangling.

       Ingress packets which are redirected out some other interface are only processed by
       netfilter on egress if they have passed through netfilter ingress processing before. Thus,
       ingress packets which are redirected by tc are not subjected to netfilter. But they are if
       they are redirected by netfilter on ingress. Conceptually, tc and netfilter can be thought
       of as layers, with netfilter layered above tc: If the packet hasn’t been passed up from
       the tc layer to the netfilter layer, it’s not subjected to netfilter on egress.

RULESET

           {list | flush} ruleset [family]

       The ruleset keyword is used to identify the whole set of tables, chains, etc. currently in
       place in kernel. The following ruleset commands exist:

       list    Print the ruleset in
               human-readable format.

       flush   Clear the whole ruleset. Note
               that, unlike iptables, this will
               remove all tables and whatever
               they contain, effectively
               leading to an empty ruleset - no
               packet filtering will happen
               anymore, so the kernel accepts
               any valid packet it receives.

       It is possible to limit list and flush to a specific address family only. For a list of
       valid family names, see the section called “ADDRESS FAMILIES” above.

       By design, list ruleset command output may be used as input to nft -f. Effectively, this
       is the nft-equivalent of iptables-save and iptables-restore.

TABLES

           {add | create} table [family] table [ {comment comment ;} { flags 'flags ; }]
           {delete | list | flush} table [family] table
           list tables [family]
           delete table [family] handle handle

       Tables are containers for chains, sets and stateful objects. They are identified by their
       address family and their name. The address family must be one of ip, ip6, inet, arp,
       bridge, netdev. The inet address family is a dummy family which is used to create hybrid
       IPv4/IPv6 tables. The meta expression nfproto keyword can be used to test which family
       (ipv4 or ipv6) context the packet is being processed in. When no address family is
       specified, ip is used by default. The only difference between add and create is that the
       former will not return an error if the specified table already exists while create will
       return an error.

       Table 4. Table flags
       ┌────────┬─────────────────────────────────┐
       │FlagDescription                     │
       ├────────┼─────────────────────────────────┤
       │        │                                 │
       │dormant │ table is not evaluated any more │
       │        │ (base chains are unregistered). │
       └────────┴─────────────────────────────────┘

       Add, change, delete a table.

           # start nft in interactive mode
           nft --interactive

           # create a new table.
           create table inet mytable

           # add a new base chain: get input packets
           add chain inet mytable myin { type filter hook input priority filter; }

           # add a single counter to the chain
           add rule inet mytable myin counter

           # disable the table temporarily -- rules are not evaluated anymore
           add table inet mytable { flags dormant; }

           # make table active again:
           add table inet mytable

       add      Add a new table for the given
                family with the given name.

       delete   Delete the specified table.

       list     List all chains and rules of the
                specified table.

       flush    Flush all chains and rules of
                the specified table.

CHAINS

           {add | create} chain [family] table chain [{ type type hook hook [device device] priority priority ; [policy policy ;] [comment comment ;] }]
           {delete | list | flush} chain ['family] table chain
           list chains [family]
           delete chain [family] table handle handle
           rename chain [family] table chain newname

       Chains are containers for rules. They exist in two kinds, base chains and regular chains.
       A base chain is an entry point for packets from the networking stack, a regular chain may
       be used as jump target and is used for better rule organization.

       add      Add a new chain in the specified
                table. When a hook and priority
                value are specified, the chain
                is created as a base chain and
                hooked up to the networking
                stack.

       create   Similar to the add command, but
                returns an error if the chain
                already exists.

       delete   Delete the specified chain. The
                chain must not contain any rules
                or be used as jump target.

       rename   Rename the specified chain.

       list     List all rules of the specified
                chain.

       flush    Flush all rules of the specified
                chain.

       For base chains, type, hook and priority parameters are mandatory.

       Table 5. Supported chain types
       ┌───────┬───────────────┬─────────────────────┬─────────────────────┐
       │TypeFamiliesHooksDescription         │
       ├───────┼───────────────┼─────────────────────┼─────────────────────┤
       │       │               │                     │                     │
       │filter │ all           │ all                 │ Standard chain type │
       │       │               │                     │ to use in doubt.    │
       ├───────┼───────────────┼─────────────────────┼─────────────────────┤
       │       │               │                     │                     │
       │nat    │ ip, ip6, inet │ prerouting, input,  │ Chains of this type │
       │       │               │ output, postrouting │ perform Native      │
       │       │               │                     │ Address Translation │
       │       │               │                     │ based on conntrack  │
       │       │               │                     │ entries. Only the   │
       │       │               │                     │ first packet of a   │
       │       │               │                     │ connection actually │
       │       │               │                     │ traverses this      │
       │       │               │                     │ chain - its rules   │
       │       │               │                     │ usually define      │
       │       │               │                     │ details of the      │
       │       │               │                     │ created conntrack   │
       │       │               │                     │ entry (NAT          │
       │       │               │                     │ statements for      │
       │       │               │                     │ instance).          │
       ├───────┼───────────────┼─────────────────────┼─────────────────────┤
       │       │               │                     │                     │
       │route  │ ip, ip6       │ output              │ If a packet has     │
       │       │               │                     │ traversed a chain   │
       │       │               │                     │ of this type and is │
       │       │               │                     │ about to be         │
       │       │               │                     │ accepted, a new     │
       │       │               │                     │ route lookup is     │
       │       │               │                     │ performed if        │
       │       │               │                     │ relevant parts of   │
       │       │               │                     │ the IP header have  │
       │       │               │                     │ changed. This       │
       │       │               │                     │ allows one to e.g.  │
       │       │               │                     │ implement policy    │
       │       │               │                     │ routing selectors   │
       │       │               │                     │ in nftables.        │
       └───────┴───────────────┴─────────────────────┴─────────────────────┘

       Apart from the special cases illustrated above (e.g. nat type not supporting forward hook
       or route type only supporting output hook), there are three further quirks worth noticing:

       •   The netdev family supports merely two combinations, namely filter type with ingress
           hook and filter type with egress hook. Base chains in this family also require the
           device parameter to be present since they exist per interface only.

       •   The arp family supports only the input and output hooks, both in chains of type
           filter.

       •   The inet family also supports the ingress hook (since Linux kernel 5.10), to filter
           IPv4 and IPv6 packet at the same location as the netdev ingress hook. This inet hook
           allows you to share sets and maps between the usual prerouting, input, forward,
           output, postrouting and this ingress hook.

       The priority parameter accepts a signed integer value or a standard priority name which
       specifies the order in which chains with the same hook value are traversed. The ordering
       is ascending, i.e. lower priority values have precedence over higher ones.

       Standard priority values can be replaced with easily memorizable names. Not all names make
       sense in every family with every hook (see the compatibility matrices below) but their
       numerical value can still be used for prioritizing chains.

       These names and values are defined and made available based on what priorities are used by
       xtables when registering their default chains.

       Most of the families use the same values, but bridge uses different ones from the others.
       See the following tables that describe the values and compatibility.

       Table 6. Standard priority names, family and hook compatibility matrix
       ┌─────────┬───────┬─────────────────────┬─────────────┐
       │NameValueFamiliesHooks       │
       ├─────────┼───────┼─────────────────────┼─────────────┤
       │         │       │                     │             │
       │raw      │ -300  │ ip, ip6, inet       │ all         │
       ├─────────┼───────┼─────────────────────┼─────────────┤
       │         │       │                     │             │
       │mangle   │ -150  │ ip, ip6, inet       │ all         │
       ├─────────┼───────┼─────────────────────┼─────────────┤
       │         │       │                     │             │
       │dstnat   │ -100  │ ip, ip6, inet       │ prerouting  │
       ├─────────┼───────┼─────────────────────┼─────────────┤
       │         │       │                     │             │
       │filter   │ 0     │ ip, ip6, inet, arp, │ all         │
       │         │       │ netdev              │             │
       ├─────────┼───────┼─────────────────────┼─────────────┤
       │         │       │                     │             │
       │security │ 50    │ ip, ip6, inet       │ all         │
       ├─────────┼───────┼─────────────────────┼─────────────┤
       │         │       │                     │             │
       │srcnat   │ 100   │ ip, ip6, inet       │ postrouting │
       └─────────┴───────┴─────────────────────┴─────────────┘

       Table 7. Standard priority names and hook compatibility for the bridge family
       ┌───────┬───────┬─────────────┐
       │       │       │             │
       │Name   │ Value │ Hooks       │
       ├───────┼───────┼─────────────┤
       │       │       │             │
       │dstnat │ -300  │ prerouting  │
       ├───────┼───────┼─────────────┤
       │       │       │             │
       │filter │ -200  │ all         │
       ├───────┼───────┼─────────────┤
       │       │       │             │
       │out    │ 100   │ output      │
       ├───────┼───────┼─────────────┤
       │       │       │             │
       │srcnat │ 300   │ postrouting │
       └───────┴───────┴─────────────┘

       Basic arithmetic expressions (addition and subtraction) can also be achieved with these
       standard names to ease relative prioritizing, e.g. mangle - 5 stands for -155. Values will
       also be printed like this until the value is not further than 10 from the standard value.

       Base chains also allow one to set the chain’s policy, i.e. what happens to packets not
       explicitly accepted or refused in contained rules. Supported policy values are accept
       (which is the default) or drop.

RULES

           {add | insert} rule [family] table chain [handle handle | index index] statement ... [comment comment]
           replace rule [family] table chain handle handle statement ... [comment comment]
           delete rule [family] table chain handle handle

       Rules are added to chains in the given table. If the family is not specified, the ip
       family is used. Rules are constructed from two kinds of components according to a set of
       grammatical rules: expressions and statements.

       The add and insert commands support an optional location specifier, which is either a
       handle or the index (starting at zero) of an existing rule. Internally, rule locations are
       always identified by handle and the translation from index happens in userspace. This has
       two potential implications in case a concurrent ruleset change happens after the
       translation was done: The effective rule index might change if a rule was inserted or
       deleted before the referred one. If the referred rule was deleted, the command is rejected
       by the kernel just as if an invalid handle was given.

       A comment is a single word or a double-quoted (") multi-word string which can be used to
       make notes regarding the actual rule. Note: If you use bash for adding rules, you have to
       escape the quotation marks, e.g. \"enable ssh for servers\".

       add       Add a new rule described by the
                 list of statements. The rule is
                 appended to the given chain
                 unless a location is specified,
                 in which case the rule is
                 inserted after the specified
                 rule.

       insert    Same as add except the rule is
                 inserted at the beginning of the
                 chain or before the specified
                 rule.

       replace   Similar to add, but the rule
                 replaces the specified rule.

       delete    Delete the specified rule.

       add a rule to ip table output chain.

           nft add rule filter output ip daddr 192.168.0.0/24 accept # 'ip filter' is assumed
           # same command, slightly more verbose
           nft add rule ip filter output ip daddr 192.168.0.0/24 accept

       delete rule from inet table.

           # nft -a list ruleset
           table inet filter {
                   chain input {
                           type filter hook input priority filter; policy accept;
                           ct state established,related accept # handle 4
                           ip saddr 10.1.1.1 tcp dport ssh accept # handle 5
                     ...
           # delete the rule with handle 5
           nft delete rule inet filter input handle 5

SETS

       nftables offers two kinds of set concepts. Anonymous sets are sets that have no specific
       name. The set members are enclosed in curly braces, with commas to separate elements when
       creating the rule the set is used in. Once that rule is removed, the set is removed as
       well. They cannot be updated, i.e. once an anonymous set is declared it cannot be changed
       anymore except by removing/altering the rule that uses the anonymous set.

       Using anonymous sets to accept particular subnets and ports.

           nft add rule filter input ip saddr { 10.0.0.0/8, 192.168.0.0/16 } tcp dport { 22, 443 } accept

       Named sets are sets that need to be defined first before they can be referenced in rules.
       Unlike anonymous sets, elements can be added to or removed from a named set at any time.
       Sets are referenced from rules using an @ prefixed to the sets name.

       Using named sets to accept addresses and ports.

           nft add rule filter input ip saddr @allowed_hosts tcp dport @allowed_ports accept

       The sets allowed_hosts and allowed_ports need to be created first. The next section
       describes nft set syntax in more detail.

           add set [family] table set { type type | typeof expression ; [flags flags ;] [timeout timeout ;] [gc-interval gc-interval ;] [elements = { element[, ...] } ;] [size size ;] [comment comment ;] [policy 'policy ;] [auto-merge ;] }
           {delete | list | flush} set [family] table set
           list sets [family]
           delete set [family] table handle handle
           {add | delete} element [family] table set { element[, ...] }

       Sets are element containers of a user-defined data type, they are uniquely identified by a
       user-defined name and attached to tables. Their behaviour can be tuned with the flags that
       can be specified at set creation time.

       add      Add a new set in the specified
                table. See the Set specification
                table below for more information
                about how to specify properties
                of a set.

       delete   Delete the specified set.

       list     Display the elements in the
                specified set.

       flush    Remove all elements from the
                specified set.

       Table 8. Set specifications
       ┌────────────┬──────────────────────────┬──────────────────────────┐
       │KeywordDescriptionType                     │
       ├────────────┼──────────────────────────┼──────────────────────────┤
       │            │                          │                          │
       │type        │ data type of set         │ string: ipv4_addr,       │
       │            │ elements                 │ ipv6_addr, ether_addr,   │
       │            │                          │ inet_proto,              │
       │            │                          │ inet_service, mark       │
       ├────────────┼──────────────────────────┼──────────────────────────┤
       │            │                          │                          │
       │typeof      │ data type of set element │ expression to derive the │
       │            │                          │ data type from           │
       ├────────────┼──────────────────────────┼──────────────────────────┤
       │            │                          │                          │
       │flags       │ set flags                │ string: constant,        │
       │            │                          │ dynamic, interval,       │
       │            │                          │ timeout                  │
       ├────────────┼──────────────────────────┼──────────────────────────┤
       │            │                          │                          │
       │timeout     │ time an element stays in │ string, decimal followed │
       │            │ the set, mandatory if    │ by unit. Units are: d,   │
       │            │ set is added to from the │ h, m, s                  │
       │            │ packet path (ruleset)    │                          │
       ├────────────┼──────────────────────────┼──────────────────────────┤
       │            │                          │                          │
       │gc-interval │ garbage collection       │ string, decimal followed │
       │            │ interval, only available │ by unit. Units are: d,   │
       │            │ when timeout or flag     │ h, m, s                  │
       │            │ timeout are active       │                          │
       ├────────────┼──────────────────────────┼──────────────────────────┤
       │            │                          │                          │
       │elements    │ elements contained by    │ set data type            │
       │            │ the set                  │                          │
       ├────────────┼──────────────────────────┼──────────────────────────┤
       │            │                          │                          │
       │size        │ maximum number of        │ unsigned integer (64     │
       │            │ elements in the set,     │ bit)                     │
       │            │ mandatory if set is      │                          │
       │            │ added to from the packet │                          │
       │            │ path (ruleset)           │                          │
       ├────────────┼──────────────────────────┼──────────────────────────┤
       │            │                          │                          │
       │policy      │ set policy               │ string: performance      │
       │            │                          │ [default], memory        │
       ├────────────┼──────────────────────────┼──────────────────────────┤
       │            │                          │                          │
       │auto-merge  │ automatic merge of       │                          │
       │            │ adjacent/overlapping set │                          │
       │            │ elements (only for       │                          │
       │            │ interval sets)           │                          │
       └────────────┴──────────────────────────┴──────────────────────────┘

MAPS

           add map [family] table map { type type | typeof expression [flags flags ;] [elements = { element[, ...] } ;] [size size ;] [comment comment ;] [policy 'policy ;] }
           {delete | list | flush} map [family] table map
           list maps [family]

       Maps store data based on some specific key used as input. They are uniquely identified by
       a user-defined name and attached to tables.

       add              Add a new map in the specified
                        table.

       delete           Delete the specified map.

       list             Display the elements in the
                        specified map.

       flush            Remove all elements from the
                        specified map.

       add element      Comma-separated list of elements
                        to add into the specified map.

       delete element   Comma-separated list of element
                        keys to delete from the
                        specified map.

       Table 9. Map specifications
       ┌─────────┬──────────────────────────┬──────────────────────────┐
       │KeywordDescriptionType                     │
       ├─────────┼──────────────────────────┼──────────────────────────┤
       │         │                          │                          │
       │type     │ data type of map         │ string: ipv4_addr,       │
       │         │ elements                 │ ipv6_addr, ether_addr,   │
       │         │                          │ inet_proto,              │
       │         │                          │ inet_service, mark,      │
       │         │                          │ counter, quota. Counter  │
       │         │                          │ and quota can’t be used  │
       │         │                          │ as keys                  │
       ├─────────┼──────────────────────────┼──────────────────────────┤
       │         │                          │                          │
       │typeof   │ data type of set element │ expression to derive the │
       │         │                          │ data type from           │
       ├─────────┼──────────────────────────┼──────────────────────────┤
       │         │                          │                          │
       │flags    │ map flags                │ string: constant,        │
       │         │                          │ interval                 │
       ├─────────┼──────────────────────────┼──────────────────────────┤
       │         │                          │                          │
       │elements │ elements contained by    │ map data type            │
       │         │ the map                  │                          │
       ├─────────┼──────────────────────────┼──────────────────────────┤
       │         │                          │                          │
       │size     │ maximum number of        │ unsigned integer (64     │
       │         │ elements in the map      │ bit)                     │
       ├─────────┼──────────────────────────┼──────────────────────────┤
       │         │                          │                          │
       │policy   │ map policy               │ string: performance      │
       │         │                          │ [default], memory        │
       └─────────┴──────────────────────────┴──────────────────────────┘

ELEMENTS

           {add | create | delete | get } element [family] table set { ELEMENT[, ...] }

           ELEMENT := key_expression OPTIONS [: value_expression]
           OPTIONS := [timeout TIMESPEC] [expires TIMESPEC] [comment string]
           TIMESPEC := [numd][numh][numm][num[s]]

       Element-related commands allow one to change contents of named sets and maps.
       key_expression is typically a value matching the set type. value_expression is not allowed
       in sets but mandatory when adding to maps, where it matches the data part in its type
       definition. When deleting from maps, it may be specified but is optional as key_expression
       uniquely identifies the element.

       create command is similar to add with the exception that none of the listed elements may
       already exist.

       get command is useful to check if an element is contained in a set which may be
       non-trivial in very large and/or interval sets. In the latter case, the containing
       interval is returned instead of just the element itself.

       Table 10. Element options
       ┌────────┬──────────────────────────────────┐
       │OptionDescription                      │
       ├────────┼──────────────────────────────────┤
       │        │                                  │
       │timeout │ timeout value for sets/maps with │
       │        │ flag timeout                     │
       ├────────┼──────────────────────────────────┤
       │        │                                  │
       │expires │ the time until given element     │
       │        │ expires, useful for ruleset      │
       │        │ replication only                 │
       ├────────┼──────────────────────────────────┤
       │        │                                  │
       │comment │ per element comment field        │
       └────────┴──────────────────────────────────┘

FLOWTABLES

           {add | create} flowtable [family] table flowtable { hook hook priority priority ; devices = { device[, ...] } ; }
           list flowtables [family]
           {delete | list} flowtable [family] table flowtable
           delete flowtable [family] table handle handle

       Flowtables allow you to accelerate packet forwarding in software. Flowtables entries are
       represented through a tuple that is composed of the input interface, source and
       destination address, source and destination port; and layer 3/4 protocols. Each entry also
       caches the destination interface and the gateway address - to update the destination
       link-layer address - to forward packets. The ttl and hoplimit fields are also decremented.
       Hence, flowtables provides an alternative path that allow packets to bypass the classic
       forwarding path. Flowtables reside in the ingress hook that is located before the
       prerouting hook. You can select which flows you want to offload through the flow
       expression from the forward chain. Flowtables are identified by their address family and
       their name. The address family must be one of ip, ip6, or inet. The inet address family is
       a dummy family which is used to create hybrid IPv4/IPv6 tables. When no address family is
       specified, ip is used by default.

       The priority can be a signed integer or filter which stands for 0. Addition and
       subtraction can be used to set relative priority, e.g. filter + 5 equals to 5.

       add      Add a new flowtable for the
                given family with the given
                name.

       delete   Delete the specified flowtable.

       list     List all flowtables.

LISTING

           list { secmarks | synproxys | flow tables | meters | hooks } [family]
           list { secmarks | synproxys | flow tables | meters | hooks } table [family] table
           list ct { timeout | expectation | helper | helpers } table [family] table

       Inspect configured objects. list hooks shows the full hook pipeline, including those
       registered by kernel modules, such as nf_conntrack.

STATEFUL OBJECTS

           {add | delete | list | reset} counter [family] table object
           {add | delete | list | reset} quota [family] table object
           {add | delete | list} limit [family] table object
           delete counter [family] table handle handle
           delete quota [family] table handle handle
           delete limit [family] table handle handle
           list counters [family]
           list quotas [family]
           list limits [family]
           reset counters [family]
           reset quotas [family]
           reset counters [family] table table
           reset quotas [family] table table

       Stateful objects are attached to tables and are identified by a unique name. They group
       stateful information from rules, to reference them in rules the keywords "type name" are
       used e.g. "counter name".

       add      Add a new stateful object in the
                specified table.

       delete   Delete the specified object.

       list     Display stateful information the
                object holds.

       reset    List-and-reset stateful object.

   CT HELPER
           add ct helper [family] table name { type type protocol protocol ; [l3proto family ;] }
           delete ct helper [family] table name
           list ct helpers

       Ct helper is used to define connection tracking helpers that can then be used in
       combination with the ct helper set statement. type and protocol are mandatory, l3proto is
       derived from the table family by default, i.e. in the inet table the kernel will try to
       load both the ipv4 and ipv6 helper backends, if they are supported by the kernel.

       Table 11. conntrack helper specifications
       ┌─────────┬─────────────────────────┬──────────────────────────┐
       │KeywordDescriptionType                     │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │type     │ name of helper type     │ quoted string (e.g.      │
       │         │                         │ "ftp")                   │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │protocol │ layer 4 protocol of the │ string (e.g. ip)         │
       │         │ helper                  │                          │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │l3proto  │ layer 3 protocol of the │ address family (e.g. ip) │
       │         │ helper                  │                          │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │comment  │ per ct helper comment   │ string                   │
       │         │ field                   │                          │
       └─────────┴─────────────────────────┴──────────────────────────┘

       defining and assigning ftp helper.

           Unlike iptables, helper assignment needs to be performed after the conntrack
           lookup has completed, for example with the default 0 hook priority.

           table inet myhelpers {
             ct helper ftp-standard {
                type "ftp" protocol tcp
             }
             chain prerouting {
                 type filter hook prerouting priority filter;
                 tcp dport 21 ct helper set "ftp-standard"
             }
           }

   CT TIMEOUT
           add ct timeout  [family] table name { protocol protocol ; policy = { state: value [, ...] } ; [l3proto family ;] }
           delete ct timeout [family] table name
           list ct timeouts

       Ct timeout is used to update connection tracking timeout values.Timeout policies are
       assigned with the ct timeout set statement. protocol and policy are mandatory, l3proto is
       derived from the table family by default.

       Table 12. conntrack timeout specifications
       ┌─────────┬─────────────────────────┬──────────────────────────┐
       │KeywordDescriptionType                     │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │protocol │ layer 4 protocol of the │ string (e.g. ip)         │
       │         │ timeout object          │                          │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │state    │ connection state name   │ string (e.g.             │
       │         │                         │ "established")           │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │value    │ timeout value for       │ unsigned integer         │
       │         │ connection state        │                          │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │l3proto  │ layer 3 protocol of the │ address family (e.g. ip) │
       │         │ timeout object          │                          │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │comment  │ per ct timeout comment  │ string                   │
       │         │ field                   │                          │
       └─────────┴─────────────────────────┴──────────────────────────┘

       tcp connection state names that can have a specific timeout value are:

       close, close_wait, established, fin_wait, last_ack, retrans, syn_recv, syn_sent, time_wait
       and unack.

       You can use sysctl -a |grep net.netfilter.nf_conntrack_tcp_timeout_ to view and change the
       system-wide defaults. ct timeout allows for flow-specific settings, without changing the
       global timeouts.

       For example, tcp port 53 could have much lower settings than other traffic.

       udp state names that can have a specific timeout value are replied and unreplied.

       defining and assigning ct timeout policy.

           table ip filter {
                   ct timeout customtimeout {
                           protocol tcp;
                           l3proto ip
                           policy = { established: 120, close: 20 }
                   }

                   chain output {
                           type filter hook output priority filter; policy accept;
                           ct timeout set "customtimeout"
                   }
           }

       testing the updated timeout policy.

           % conntrack -E

           It should display:

           [UPDATE] tcp      6 120 ESTABLISHED src=172.16.19.128 dst=172.16.19.1
           sport=22 dport=41360 [UNREPLIED] src=172.16.19.1 dst=172.16.19.128
           sport=41360 dport=22

   CT EXPECTATION
           add ct expectation  [family] table name { protocol protocol ; dport dport ; timeout timeout ; size size ; [*l3proto family ;] }
           delete ct expectation  [family] table name
           list ct expectations

       Ct expectation is used to create connection expectations. Expectations are assigned with
       the ct expectation set statement. protocol, dport, timeout and size are mandatory, l3proto
       is derived from the table family by default.

       Table 13. conntrack expectation specifications
       ┌─────────┬─────────────────────────┬──────────────────────────┐
       │KeywordDescriptionType                     │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │protocol │ layer 4 protocol of the │ string (e.g. ip)         │
       │         │ expectation object      │                          │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │dport    │ destination port of     │ unsigned integer         │
       │         │ expected connection     │                          │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │timeout  │ timeout value for       │ unsigned integer         │
       │         │ expectation             │                          │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │size     │ size value for          │ unsigned integer         │
       │         │ expectation             │                          │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │l3proto  │ layer 3 protocol of the │ address family (e.g. ip) │
       │         │ expectation object      │                          │
       ├─────────┼─────────────────────────┼──────────────────────────┤
       │         │                         │                          │
       │comment  │ per ct expectation      │ string                   │
       │         │ comment field           │                          │
       └─────────┴─────────────────────────┴──────────────────────────┘

       defining and assigning ct expectation policy.

           table ip filter {
                   ct expectation expect {
                           protocol udp
                           dport 9876
                           timeout 2m
                           size 8
                           l3proto ip
                   }

                   chain input {
                           type filter hook input priority filter; policy accept;
                           ct expectation set "expect"
                   }
           }

   COUNTER
           add counter [family] table name [{ [ packets packets bytes bytes ; ] [ comment comment ; }]
           delete counter [family] table name
           list counters

       Table 14. Counter specifications
       ┌────────┬──────────────────────────┬──────────────────────┐
       │KeywordDescriptionType                 │
       ├────────┼──────────────────────────┼──────────────────────┤
       │        │                          │                      │
       │packets │ initial count of packets │ unsigned integer (64 │
       │        │                          │ bit)                 │
       ├────────┼──────────────────────────┼──────────────────────┤
       │        │                          │                      │
       │bytes   │ initial count of bytes   │ unsigned integer (64 │
       │        │                          │ bit)                 │
       ├────────┼──────────────────────────┼──────────────────────┤
       │        │                          │                      │
       │comment │ per counter comment      │ string               │
       │        │ field                    │                      │
       └────────┴──────────────────────────┴──────────────────────┘

       Using named counters.

           nft add counter filter http
           nft add rule filter input tcp dport 80 counter name \"http\"

       Using named counters with maps.

           nft add counter filter http
           nft add counter filter https
           nft add rule filter input counter name tcp dport map { 80 : \"http\", 443 : \"https\" }

   QUOTA
           add quota [family] table name { [over|until] bytes BYTE_UNIT [ used bytes BYTE_UNIT ] ; [ comment comment ; ] }
           BYTE_UNIT := bytes | kbytes | mbytes
           delete quota [family] table name
           list quotas

       Table 15. Quota specifications
       ┌────────┬──────────────────────────┬─────────────────────────┐
       │KeywordDescriptionType                    │
       ├────────┼──────────────────────────┼─────────────────────────┤
       │        │                          │                         │
       │quota   │ quota limit, used as the │ Two arguments, unsigned │
       │        │ quota name               │ integer (64 bit) and    │
       │        │                          │ string: bytes, kbytes,  │
       │        │                          │ mbytes. "over" and      │
       │        │                          │ "until" go before these │
       │        │                          │ arguments               │
       ├────────┼──────────────────────────┼─────────────────────────┤
       │        │                          │                         │
       │used    │ initial value of used    │ Two arguments, unsigned │
       │        │ quota                    │ integer (64 bit) and    │
       │        │                          │ string: bytes, kbytes,  │
       │        │                          │ mbytes                  │
       ├────────┼──────────────────────────┼─────────────────────────┤
       │        │                          │                         │
       │comment │ per quota comment field  │ string                  │
       └────────┴──────────────────────────┴─────────────────────────┘

       Using named quotas.

           nft add quota filter user123 { over 20 mbytes }
           nft add rule filter input ip saddr 192.168.10.123 quota name \"user123\"

       Using named quotas with maps.

           nft add quota filter user123 { over 20 mbytes }
           nft add quota filter user124 { over 20 mbytes }
           nft add rule filter input quota name ip saddr map { 192.168.10.123 : \"user123\", 192.168.10.124 : \"user124\" }

EXPRESSIONS

       Expressions represent values, either constants like network addresses, port numbers, etc.,
       or data gathered from the packet during ruleset evaluation. Expressions can be combined
       using binary, logical, relational and other types of expressions to form complex or
       relational (match) expressions. They are also used as arguments to certain types of
       operations, like NAT, packet marking etc.

       Each expression has a data type, which determines the size, parsing and representation of
       symbolic values and type compatibility with other expressions.

   DESCRIBE COMMAND
           describe expression | data type

       The describe command shows information about the type of an expression and its data type.
       A data type may also be given, in which nft will display more information about the type.

       The describe command.

           $ nft describe tcp flags
           payload expression, datatype tcp_flag (TCP flag) (basetype bitmask, integer), 8 bits

           predefined symbolic constants:
           fin                           0x01
           syn                           0x02
           rst                           0x04
           psh                           0x08
           ack                           0x10
           urg                           0x20
           ecn                           0x40
           cwr                           0x80

DATA TYPES

       Data types determine the size, parsing and representation of symbolic values and type
       compatibility of expressions. A number of global data types exist, in addition some
       expression types define further data types specific to the expression type. Most data
       types have a fixed size, some however may have a dynamic size, f.i. the string type. Some
       types also have predefined symbolic constants. Those can be listed using the nft describe
       command:

           $ nft describe ct_state
           datatype ct_state (conntrack state) (basetype bitmask, integer), 32 bits

           pre-defined symbolic constants (in hexadecimal):
           invalid                         0x00000001
           new ...

       Types may be derived from lower order types, f.i. the IPv4 address type is derived from
       the integer type, meaning an IPv4 address can also be specified as an integer value.

       In certain contexts (set and map definitions), it is necessary to explicitly specify a
       data type. Each type has a name which is used for this.

   INTEGER TYPE
       ┌────────┬─────────┬──────────┬───────────┐
       │NameKeywordSizeBase type │
       ├────────┼─────────┼──────────┼───────────┤
       │        │         │          │           │
       │Integer │ integer │ variable │ -         │
       └────────┴─────────┴──────────┴───────────┘

       The integer type is used for numeric values. It may be specified as a decimal, hexadecimal
       or octal number. The integer type does not have a fixed size, its size is determined by
       the expression for which it is used.

   BITMASK TYPE
       ┌────────┬─────────┬──────────┬───────────┐
       │NameKeywordSizeBase type │
       ├────────┼─────────┼──────────┼───────────┤
       │        │         │          │           │
       │Bitmask │ bitmask │ variable │ integer   │
       └────────┴─────────┴──────────┴───────────┘

       The bitmask type (bitmask) is used for bitmasks.

   STRING TYPE
       ┌───────┬─────────┬──────────┬───────────┐
       │NameKeywordSizeBase type │
       ├───────┼─────────┼──────────┼───────────┤
       │       │         │          │           │
       │String │ string  │ variable │ -         │
       └───────┴─────────┴──────────┴───────────┘

       The string type is used for character strings. A string begins with an alphabetic
       character (a-zA-Z) followed by zero or more alphanumeric characters or the characters /,
       -, _ and .. In addition, anything enclosed in double quotes (") is recognized as a string.

       String specification.

           # Interface name
           filter input iifname eth0

           # Weird interface name
           filter input iifname "(eth0)"

   LINK LAYER ADDRESS TYPE
       ┌───────────────────┬─────────┬──────────┬───────────┐
       │NameKeywordSizeBase type │
       ├───────────────────┼─────────┼──────────┼───────────┤
       │                   │         │          │           │
       │Link layer address │ lladdr  │ variable │ integer   │
       └───────────────────┴─────────┴──────────┴───────────┘

       The link layer address type is used for link layer addresses. Link layer addresses are
       specified as a variable amount of groups of two hexadecimal digits separated using colons
       (:).

       Link layer address specification.

           # Ethernet destination MAC address
           filter input ether daddr 20:c9:d0:43:12:d9

   IPV4 ADDRESS TYPE
       ┌─────────────┬───────────┬────────┬───────────┐
       │NameKeywordSizeBase type │
       ├─────────────┼───────────┼────────┼───────────┤
       │             │           │        │           │
       │IPV4 address │ ipv4_addr │ 32 bit │ integer   │
       └─────────────┴───────────┴────────┴───────────┘

       The IPv4 address type is used for IPv4 addresses. Addresses are specified in either dotted
       decimal, dotted hexadecimal, dotted octal, decimal, hexadecimal, octal notation or as a
       host name. A host name will be resolved using the standard system resolver.

       IPv4 address specification.

           # dotted decimal notation
           filter output ip daddr 127.0.0.1

           # host name
           filter output ip daddr localhost

   IPV6 ADDRESS TYPE
       ┌─────────────┬───────────┬─────────┬───────────┐
       │NameKeywordSizeBase type │
       ├─────────────┼───────────┼─────────┼───────────┤
       │             │           │         │           │
       │IPv6 address │ ipv6_addr │ 128 bit │ integer   │
       └─────────────┴───────────┴─────────┴───────────┘

       The IPv6 address type is used for IPv6 addresses. Addresses are specified as a host name
       or as hexadecimal halfwords separated by colons. Addresses might be enclosed in square
       brackets ("[]") to differentiate them from port numbers.

       IPv6 address specification.

           # abbreviated loopback address
           filter output ip6 daddr ::1

       IPv6 address specification with bracket notation.

           # without [] the port number (22) would be parsed as part of the
           # ipv6 address
           ip6 nat prerouting tcp dport 2222 dnat to [1ce::d0]:22

   BOOLEAN TYPE
       ┌────────┬─────────┬───────┬───────────┐
       │NameKeywordSizeBase type │
       ├────────┼─────────┼───────┼───────────┤
       │        │         │       │           │
       │Boolean │ boolean │ 1 bit │ integer   │
       └────────┴─────────┴───────┴───────────┘

       The boolean type is a syntactical helper type in userspace. Its use is in the right-hand
       side of a (typically implicit) relational expression to change the expression on the
       left-hand side into a boolean check (usually for existence).

       Table 16. The following keywords will automatically resolve into a boolean type with given
       value
       ┌────────┬───────┐
       │KeywordValue │
       ├────────┼───────┤
       │        │       │
       │exists  │ 1     │
       ├────────┼───────┤
       │        │       │
       │missing │ 0     │
       └────────┴───────┘

       Table 17. expressions support a boolean comparison
       ┌───────────┬─────────────────────────────┐
       │ExpressionBehaviour                   │
       ├───────────┼─────────────────────────────┤
       │           │                             │
       │fib        │ Check route existence.      │
       ├───────────┼─────────────────────────────┤
       │           │                             │
       │exthdr     │ Check IPv6 extension header │
       │           │ existence.                  │
       ├───────────┼─────────────────────────────┤
       │           │                             │
       │tcp option │ Check TCP option header     │
       │           │ existence.                  │
       └───────────┴─────────────────────────────┘

       Boolean specification.

           # match if route exists
           filter input fib daddr . iif oif exists

           # match only non-fragmented packets in IPv6 traffic
           filter input exthdr frag missing

           # match if TCP timestamp option is present
           filter input tcp option timestamp exists

   ICMP TYPE TYPE
       ┌──────────┬───────────┬───────┬───────────┐
       │NameKeywordSizeBase type │
       ├──────────┼───────────┼───────┼───────────┤
       │          │           │       │           │
       │ICMP Type │ icmp_type │ 8 bit │ integer   │
       └──────────┴───────────┴───────┴───────────┘

       The ICMP Type type is used to conveniently specify the ICMP header’s type field.

       Table 18. Keywords may be used when specifying the ICMP type
       ┌────────────────────────┬───────┐
       │KeywordValue │
       ├────────────────────────┼───────┤
       │                        │       │
       │echo-reply              │ 0     │
       ├────────────────────────┼───────┤
       │                        │       │
       │destination-unreachable │ 3     │
       ├────────────────────────┼───────┤
       │                        │       │
       │source-quench           │ 4     │
       ├────────────────────────┼───────┤
       │                        │       │
       │redirect                │ 5     │
       ├────────────────────────┼───────┤
       │                        │       │
       │echo-request            │ 8     │
       ├────────────────────────┼───────┤
       │                        │       │
       │router-advertisement    │ 9     │
       ├────────────────────────┼───────┤
       │                        │       │
       │router-solicitation     │ 10    │
       ├────────────────────────┼───────┤
       │                        │       │
       │time-exceeded           │ 11    │
       ├────────────────────────┼───────┤
       │                        │       │
       │parameter-problem       │ 12    │
       ├────────────────────────┼───────┤
       │                        │       │
       │timestamp-request       │ 13    │
       ├────────────────────────┼───────┤
       │                        │       │
       │timestamp-reply         │ 14    │
       ├────────────────────────┼───────┤
       │                        │       │
       │info-request            │ 15    │
       ├────────────────────────┼───────┤
       │                        │       │
       │info-reply              │ 16    │
       ├────────────────────────┼───────┤
       │                        │       │
       │address-mask-request    │ 17    │
       ├────────────────────────┼───────┤
       │                        │       │
       │address-mask-reply      │ 18    │
       └────────────────────────┴───────┘

       ICMP Type specification.

           # match ping packets
           filter output icmp type { echo-request, echo-reply }

   ICMP CODE TYPE
       ┌──────────┬───────────┬───────┬───────────┐
       │NameKeywordSizeBase type │
       ├──────────┼───────────┼───────┼───────────┤
       │          │           │       │           │
       │ICMP Code │ icmp_code │ 8 bit │ integer   │
       └──────────┴───────────┴───────┴───────────┘

       The ICMP Code type is used to conveniently specify the ICMP header’s code field.

       Table 19. Keywords may be used when specifying the ICMP code
       ┌─────────────────┬───────┐
       │KeywordValue │
       ├─────────────────┼───────┤
       │                 │       │
       │net-unreachable  │ 0     │
       ├─────────────────┼───────┤
       │                 │       │
       │host-unreachable │ 1     │
       ├─────────────────┼───────┤
       │                 │       │
       │prot-unreachable │ 2     │
       ├─────────────────┼───────┤
       │                 │       │
       │port-unreachable │ 3     │
       ├─────────────────┼───────┤
       │                 │       │
       │frag-needed      │ 4     │
       ├─────────────────┼───────┤
       │                 │       │
       │net-prohibited   │ 9     │
       ├─────────────────┼───────┤
       │                 │       │
       │host-prohibited  │ 10    │
       ├─────────────────┼───────┤
       │                 │       │
       │admin-prohibited │ 13    │
       └─────────────────┴───────┘

   ICMPV6 TYPE TYPE
       ┌────────────┬────────────┬───────┬───────────┐
       │NameKeywordSizeBase type │
       ├────────────┼────────────┼───────┼───────────┤
       │            │            │       │           │
       │ICMPv6 Type │ icmpx_code │ 8 bit │ integer   │
       └────────────┴────────────┴───────┴───────────┘

       The ICMPv6 Type type is used to conveniently specify the ICMPv6 header’s type field.

       Table 20. keywords may be used when specifying the ICMPv6 type:
       ┌────────────────────────┬───────┐
       │KeywordValue │
       ├────────────────────────┼───────┤
       │                        │       │
       │destination-unreachable │ 1     │
       ├────────────────────────┼───────┤
       │                        │       │
       │packet-too-big          │ 2     │
       ├────────────────────────┼───────┤
       │                        │       │
       │time-exceeded           │ 3     │
       ├────────────────────────┼───────┤
       │                        │       │
       │parameter-problem       │ 4     │
       ├────────────────────────┼───────┤
       │                        │       │
       │echo-request            │ 128   │
       ├────────────────────────┼───────┤
       │                        │       │
       │echo-reply              │ 129   │
       ├────────────────────────┼───────┤
       │                        │       │
       │mld-listener-query      │ 130   │
       ├────────────────────────┼───────┤
       │                        │       │
       │mld-listener-report     │ 131   │
       ├────────────────────────┼───────┤
       │                        │       │
       │mld-listener-done       │ 132   │
       ├────────────────────────┼───────┤
       │                        │       │
       │mld-listener-reduction  │ 132   │
       ├────────────────────────┼───────┤
       │                        │       │
       │nd-router-solicit       │ 133   │
       ├────────────────────────┼───────┤
       │                        │       │
       │nd-router-advert        │ 134   │
       ├────────────────────────┼───────┤
       │                        │       │
       │nd-neighbor-solicit     │ 135   │
       ├────────────────────────┼───────┤
       │                        │       │
       │nd-neighbor-advert      │ 136   │
       ├────────────────────────┼───────┤
       │                        │       │
       │nd-redirect             │ 137   │
       ├────────────────────────┼───────┤
       │                        │       │
       │router-renumbering      │ 138   │
       ├────────────────────────┼───────┤
       │                        │       │
       │ind-neighbor-solicit    │ 141   │
       ├────────────────────────┼───────┤
       │                        │       │
       │ind-neighbor-advert     │ 142   │
       ├────────────────────────┼───────┤
       │                        │       │
       │mld2-listener-report    │ 143   │
       └────────────────────────┴───────┘

       ICMPv6 Type specification.

           # match ICMPv6 ping packets
           filter output icmpv6 type { echo-request, echo-reply }

   ICMPV6 CODE TYPE
       ┌────────────┬─────────────┬───────┬───────────┐
       │NameKeywordSizeBase type │
       ├────────────┼─────────────┼───────┼───────────┤
       │            │             │       │           │
       │ICMPv6 Code │ icmpv6_code │ 8 bit │ integer   │
       └────────────┴─────────────┴───────┴───────────┘

       The ICMPv6 Code type is used to conveniently specify the ICMPv6 header’s code field.

       Table 21. keywords may be used when specifying the ICMPv6 code
       ┌─────────────────┬───────┐
       │KeywordValue │
       ├─────────────────┼───────┤
       │                 │       │
       │no-route         │ 0     │
       ├─────────────────┼───────┤
       │                 │       │
       │admin-prohibited │ 1     │
       ├─────────────────┼───────┤
       │                 │       │
       │addr-unreachable │ 3     │
       ├─────────────────┼───────┤
       │                 │       │
       │port-unreachable │ 4     │
       ├─────────────────┼───────┤
       │                 │       │
       │policy-fail      │ 5     │
       ├─────────────────┼───────┤
       │                 │       │
       │reject-route     │ 6     │
       └─────────────────┴───────┘

   ICMPVX CODE TYPE
       ┌────────────┬─────────────┬───────┬───────────┐
       │NameKeywordSizeBase type │
       ├────────────┼─────────────┼───────┼───────────┤
       │            │             │       │           │
       │ICMPvX Code │ icmpv6_type │ 8 bit │ integer   │
       └────────────┴─────────────┴───────┴───────────┘

       The ICMPvX Code type abstraction is a set of values which overlap between ICMP and ICMPv6
       Code types to be used from the inet family.

       Table 22. keywords may be used when specifying the ICMPvX code
       ┌─────────────────┬───────┐
       │KeywordValue │
       ├─────────────────┼───────┤
       │                 │       │
       │no-route         │ 0     │
       ├─────────────────┼───────┤
       │                 │       │
       │port-unreachable │ 1     │
       ├─────────────────┼───────┤
       │                 │       │
       │host-unreachable │ 2     │
       ├─────────────────┼───────┤
       │                 │       │
       │admin-prohibited │ 3     │
       └─────────────────┴───────┘

   CONNTRACK TYPES
       Table 23. overview of types used in ct expression and statement
       ┌────────────────────┬───────────┬─────────┬───────────┐
       │NameKeywordSizeBase type │
       ├────────────────────┼───────────┼─────────┼───────────┤
       │                    │           │         │           │
       │conntrack state     │ ct_state  │ 4 byte  │ bitmask   │
       ├────────────────────┼───────────┼─────────┼───────────┤
       │                    │           │         │           │
       │conntrack direction │ ct_dir    │ 8 bit   │ integer   │
       ├────────────────────┼───────────┼─────────┼───────────┤
       │                    │           │         │           │
       │conntrack status    │ ct_status │ 4 byte  │ bitmask   │
       ├────────────────────┼───────────┼─────────┼───────────┤
       │                    │           │         │           │
       │conntrack event     │ ct_event  │ 4 byte  │ bitmask   │
       │bits                │           │         │           │
       ├────────────────────┼───────────┼─────────┼───────────┤
       │                    │           │         │           │
       │conntrack label     │ ct_label  │ 128 bit │ bitmask   │
       └────────────────────┴───────────┴─────────┴───────────┘

       For each of the types above, keywords are available for convenience:

       Table 24. conntrack state (ct_state)
       ┌────────────┬───────┐
       │KeywordValue │
       ├────────────┼───────┤
       │            │       │
       │invalid     │ 1     │
       ├────────────┼───────┤
       │            │       │
       │established │ 2     │
       ├────────────┼───────┤
       │            │       │
       │related     │ 4     │
       ├────────────┼───────┤
       │            │       │
       │new         │ 8     │
       ├────────────┼───────┤
       │            │       │
       │untracked   │ 64    │
       └────────────┴───────┘

       Table 25. conntrack direction (ct_dir)
       ┌─────────┬───────┐
       │KeywordValue │
       ├─────────┼───────┤
       │         │       │
       │original │ 0     │
       ├─────────┼───────┤
       │         │       │
       │reply    │ 1     │
       └─────────┴───────┘

       Table 26. conntrack status (ct_status)
       ┌───────────┬───────┐
       │KeywordValue │
       ├───────────┼───────┤
       │           │       │
       │expected   │ 1     │
       ├───────────┼───────┤
       │           │       │
       │seen-reply │ 2     │
       ├───────────┼───────┤
       │           │       │
       │assured    │ 4     │
       ├───────────┼───────┤
       │           │       │
       │confirmed  │ 8     │
       ├───────────┼───────┤
       │           │       │
       │snat       │ 16    │
       ├───────────┼───────┤
       │           │       │
       │dnat       │ 32    │
       ├───────────┼───────┤
       │           │       │
       │dying      │ 512   │
       └───────────┴───────┘

       Table 27. conntrack event bits (ct_event)
       ┌──────────┬───────┐
       │KeywordValue │
       ├──────────┼───────┤
       │          │       │
       │new       │ 1     │
       ├──────────┼───────┤
       │          │       │
       │related   │ 2     │
       ├──────────┼───────┤
       │          │       │
       │destroy   │ 4     │
       ├──────────┼───────┤
       │          │       │
       │reply     │ 8     │
       ├──────────┼───────┤
       │          │       │
       │assured   │ 16    │
       ├──────────┼───────┤
       │          │       │
       │protoinfo │ 32    │
       ├──────────┼───────┤
       │          │       │
       │helper    │ 64    │
       ├──────────┼───────┤
       │          │       │
       │mark      │ 128   │
       ├──────────┼───────┤
       │          │       │
       │seqadj    │ 256   │
       ├──────────┼───────┤
       │          │       │
       │secmark   │ 512   │
       ├──────────┼───────┤
       │          │       │
       │label     │ 1024  │
       └──────────┴───────┘

       Possible keywords for conntrack label type (ct_label) are read at runtime from
       /etc/connlabel.conf.

   DCCP PKTTYPE TYPE
       ┌─────────────────┬──────────────┬───────┬───────────┐
       │NameKeywordSizeBase type │
       ├─────────────────┼──────────────┼───────┼───────────┤
       │                 │              │       │           │
       │DCCP packet type │ dccp_pkttype │ 4 bit │ integer   │
       └─────────────────┴──────────────┴───────┴───────────┘

       The DCCP packet type abstracts the different legal values of the respective four bit field
       in the DCCP header, as stated by RFC4340. Note that possible values 10-15 are considered
       reserved and therefore not allowed to be used. In iptables' dccp match, these values are
       aliased INVALID. With nftables, one may simply match on the numeric value range, i.e.
       10-15.

       Table 28. keywords may be used when specifying the DCCP packet type
       ┌─────────┬───────┐
       │KeywordValue │
       ├─────────┼───────┤
       │         │       │
       │request  │ 0     │
       ├─────────┼───────┤
       │         │       │
       │response │ 1     │
       ├─────────┼───────┤
       │         │       │
       │data     │ 2     │
       ├─────────┼───────┤
       │         │       │
       │ack      │ 3     │
       ├─────────┼───────┤
       │         │       │
       │dataack  │ 4     │
       ├─────────┼───────┤
       │         │       │
       │closereq │ 5     │
       ├─────────┼───────┤
       │         │       │
       │close    │ 6     │
       ├─────────┼───────┤
       │         │       │
       │reset    │ 7     │
       ├─────────┼───────┤
       │         │       │
       │sync     │ 8     │
       ├─────────┼───────┤
       │         │       │
       │syncack  │ 9     │
       └─────────┴───────┘

PRIMARY EXPRESSIONS

       The lowest order expression is a primary expression, representing either a constant or a
       single datum from a packet’s payload, meta data or a stateful module.

   META EXPRESSIONS
           meta {length | nfproto | l4proto | protocol | priority}
           [meta] {mark | iif | iifname | iiftype | oif | oifname | oiftype | skuid | skgid | nftrace | rtclassid | ibrname | obrname | pkttype | cpu | iifgroup | oifgroup | cgroup | random | ipsec | iifkind | oifkind | time | hour | day }

       A meta expression refers to meta data associated with a packet.

       There are two types of meta expressions: unqualified and qualified meta expressions.
       Qualified meta expressions require the meta keyword before the meta key, unqualified meta
       expressions can be specified by using the meta key directly or as qualified meta
       expressions. Meta l4proto is useful to match a particular transport protocol that is part
       of either an IPv4 or IPv6 packet. It will also skip any IPv6 extension headers present in
       an IPv6 packet.

       meta iif, oif, iifname and oifname are used to match the interface a packet arrived on or
       is about to be sent out on.

       iif and oif are used to match on the interface index, whereas iifname and oifname are used
       to match on the interface name. This is not the same — assuming the rule

           filter input meta iif "foo"

       Then this rule can only be added if the interface "foo" exists. Also, the rule will
       continue to match even if the interface "foo" is renamed to "bar".

       This is because internally the interface index is used. In case of dynamically created
       interfaces, such as tun/tap or dialup interfaces (ppp for example), it might be better to
       use iifname or oifname instead.

       In these cases, the name is used so the interface doesn’t have to exist to add such a
       rule, it will stop matching if the interface gets renamed and it will match again in case
       interface gets deleted and later a new interface with the same name is created.

       Like with iptables, wildcard matching on interface name prefixes is available for iifname
       and oifname matches by appending an asterisk (*) character. Note however that unlike
       iptables, nftables does not accept interface names consisting of the wildcard character
       only - users are supposed to just skip those always matching expressions. In order to
       match on literal asterisk character, one may escape it using backslash (\).

       Table 29. Meta expression types
       ┌──────────┬──────────────────────────┬─────────────────────┐
       │KeywordDescriptionType                │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │length    │ Length of the packet in  │ integer (32-bit)    │
       │          │ bytes                    │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │nfproto   │ real hook protocol       │ integer (32 bit)    │
       │          │ family, useful only in   │                     │
       │          │ inet table               │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │l4proto   │ layer 4 protocol, skips  │ integer (8 bit)     │
       │          │ ipv6 extension headers   │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │protocol  │ EtherType protocol value │ ether_type          │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │priority  │ TC packet priority       │ tc_handle           │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │mark      │ Packet mark              │ mark                │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │iif       │ Input interface index    │ iface_index         │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │iifname   │ Input interface name     │ ifname              │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │iiftype   │ Input interface type     │ iface_type          │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │oif       │ Output interface index   │ iface_index         │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │oifname   │ Output interface name    │ ifname              │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │oiftype   │ Output interface         │ iface_type          │
       │          │ hardware type            │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │sdif      │ Slave device input       │ iface_index         │
       │          │ interface index          │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │sdifname  │ Slave device interface   │ ifname              │
       │          │ name                     │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │skuid     │ UID associated with      │ uid                 │
       │          │ originating socket       │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │skgid     │ GID associated with      │ gid                 │
       │          │ originating socket       │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │rtclassid │ Routing realm            │ realm               │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │ibrname   │ Input bridge interface   │ ifname              │
       │          │ name                     │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │obrname   │ Output bridge interface  │ ifname              │
       │          │ name                     │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │pkttype   │ packet type              │ pkt_type            │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │cpu       │ cpu number processing    │ integer (32 bit)    │
       │          │ the packet               │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │iifgroup  │ incoming device group    │ devgroup            │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │oifgroup  │ outgoing device group    │ devgroup            │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │cgroup    │ control group id         │ integer (32 bit)    │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │random    │ pseudo-random number     │ integer (32 bit)    │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │ipsec     │ true if packet was ipsec │ boolean (1 bit)     │
       │          │ encrypted                │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │iifkind   │ Input interface kind     │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │oifkind   │ Output interface kind    │                     │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │time      │ Absolute time of packet  │ Integer (32 bit) or │
       │          │ reception                │ string              │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │day       │ Day of week              │ Integer (8 bit) or  │
       │          │                          │ string              │
       ├──────────┼──────────────────────────┼─────────────────────┤
       │          │                          │                     │
       │hour      │ Hour of day              │ String              │
       └──────────┴──────────────────────────┴─────────────────────┘

       Table 30. Meta expression specific types
       ┌──────────────┬──────────────────────────────────┐
       │TypeDescription                      │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │iface_index   │ Interface index (32 bit number). │
       │              │ Can be specified numerically or  │
       │              │ as name of an existing           │
       │              │ interface.                       │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │ifname        │ Interface name (16 byte string). │
       │              │ Does not have to exist.          │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │iface_type    │ Interface type (16 bit number).  │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │uid           │ User ID (32 bit number). Can be  │
       │              │ specified numerically or as user │
       │              │ name.                            │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │gid           │ Group ID (32 bit number). Can be │
       │              │ specified numerically or as      │
       │              │ group name.                      │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │realm         │ Routing Realm (32 bit number).   │
       │              │ Can be specified numerically or  │
       │              │ as symbolic name defined in      │
       │              │ /etc/iproute2/rt_realms.         │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │devgroup_type │ Device group (32 bit number).    │
       │              │ Can be specified numerically or  │
       │              │ as symbolic name defined in      │
       │              │ /etc/iproute2/group.             │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │pkt_type      │ Packet type: host (addressed to  │
       │              │ local host), broadcast (to all), │
       │              │ multicast (to group), other      │
       │              │ (addressed to another host).     │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │ifkind        │ Interface kind (16 byte string). │
       │              │ See TYPES in ip-link(8) for a    │
       │              │ list.                            │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │time          │ Either an integer or a date in   │
       │              │ ISO format. For example:         │
       │              │ "2019-06-06 17:00". Hour and     │
       │              │ seconds are optional and can be  │
       │              │ omitted if desired. If omitted,  │
       │              │ midnight will be assumed. The    │
       │              │ following three would be         │
       │              │ equivalent: "2019-06-06",        │
       │              │ "2019-06-06 00:00" and           │
       │              │ "2019-06-06 00:00:00". When an   │
       │              │ integer is given, it is assumed  │
       │              │ to be a UNIX timestamp.          │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │day           │ Either a day of week ("Monday",  │
       │              │ "Tuesday", etc.), or an integer  │
       │              │ between 0 and 6. Strings are     │
       │              │ matched case-insensitively, and  │
       │              │ a full match is not expected     │
       │              │ (e.g. "Mon" would match          │
       │              │ "Monday"). When an integer is    │
       │              │ given, 0 is Sunday and 6 is      │
       │              │ Saturday.                        │
       ├──────────────┼──────────────────────────────────┤
       │              │                                  │
       │hour          │ A string representing an hour in │
       │              │ 24-hour format. Seconds can      │
       │              │ optionally be specified. For     │
       │              │ example, 17:00 and 17:00:00      │
       │              │ would be equivalent.             │
       └──────────────┴──────────────────────────────────┘

       Using meta expressions.

           # qualified meta expression
           filter output meta oif eth0
           filter forward meta iifkind { "tun", "veth" }

           # unqualified meta expression
           filter output oif eth0

           # incoming packet was subject to ipsec processing
           raw prerouting meta ipsec exists accept

   SOCKET EXPRESSION
           socket {transparent | mark | wildcard}
           socket cgroupv2 level NUM

       Socket expression can be used to search for an existing open TCP/UDP socket and its
       attributes that can be associated with a packet. It looks for an established or non-zero
       bound listening socket (possibly with a non-local address). You can also use it to match
       on the socket cgroupv2 at a given ancestor level, e.g. if the socket belongs to cgroupv2
       a/b, ancestor level 1 checks for a matching on cgroup a and ancestor level 2 checks for a
       matching on cgroup b.

       Table 31. Available socket attributes
       ┌────────────┬──────────────────────────┬─────────────────┐
       │NameDescriptionType            │
       ├────────────┼──────────────────────────┼─────────────────┤
       │            │                          │                 │
       │transparent │ Value of the             │ boolean (1 bit) │
       │            │ IP_TRANSPARENT socket    │                 │
       │            │ option in the found      │                 │
       │            │ socket. It can be 0 or   │                 │
       │            │ 1.                       │                 │
       ├────────────┼──────────────────────────┼─────────────────┤
       │            │                          │                 │
       │mark        │ Value of the socket mark │ mark            │
       │            │ (SOL_SOCKET, SO_MARK).   │                 │
       ├────────────┼──────────────────────────┼─────────────────┤
       │            │                          │                 │
       │wildcard    │ Indicates whether the    │ boolean (1 bit) │
       │            │ socket is wildcard-bound │                 │
       │            │ (e.g. 0.0.0.0 or ::0).   │                 │
       ├────────────┼──────────────────────────┼─────────────────┤
       │            │                          │                 │
       │cgroupv2    │ cgroup version 2 for     │ cgroupv2        │
       │            │ this socket (path from   │                 │
       │            │ /sys/fs/cgroup)          │                 │
       └────────────┴──────────────────────────┴─────────────────┘

       Using socket expression.

           # Mark packets that correspond to a transparent socket. "socket wildcard 0"
           # means that zero-bound listener sockets are NOT matched (which is usually
           # exactly what you want).
           table inet x {
               chain y {
                   type filter hook prerouting priority mangle; policy accept;
                   socket transparent 1 socket wildcard 0 mark set 0x00000001 accept
               }
           }

           # Trace packets that corresponds to a socket with a mark value of 15
           table inet x {
               chain y {
                   type filter hook prerouting priority mangle; policy accept;
                   socket mark 0x0000000f nftrace set 1
               }
           }

           # Set packet mark to socket mark
           table inet x {
               chain y {
                   type filter hook prerouting priority mangle; policy accept;
                   tcp dport 8080 mark set socket mark
               }
           }

           # Count packets for cgroupv2 "user.slice" at level 1
           table inet x {
               chain y {
                   type filter hook input priority filter; policy accept;
                   socket cgroupv2 level 1 "user.slice" counter
               }
           }

   OSF EXPRESSION
           osf [ttl {loose | skip}] {name | version}

       The osf expression does passive operating system fingerprinting. This expression compares
       some data (Window Size, MSS, options and their order, DF, and others) from packets with
       the SYN bit set.

       Table 32. Available osf attributes
       ┌────────┬──────────────────────────┬────────┐
       │NameDescriptionType   │
       ├────────┼──────────────────────────┼────────┤
       │        │                          │        │
       │ttl     │ Do TTL checks on the     │ string │
       │        │ packet to determine the  │        │
       │        │ operating system.        │        │
       ├────────┼──────────────────────────┼────────┤
       │        │                          │        │
       │version │ Do OS version checks on  │        │
       │        │ the packet.              │        │
       ├────────┼──────────────────────────┼────────┤
       │        │                          │        │
       │name    │ Name of the OS signature │ string │
       │        │ to match. All signatures │        │
       │        │ can be found at pf.os    │        │
       │        │ file. Use "unknown" for  │        │
       │        │ OS signatures that the   │        │
       │        │ expression could not     │        │
       │        │ detect.                  │        │
       └────────┴──────────────────────────┴────────┘

       Available ttl values.

           If no TTL attribute is passed, make a true IP header and fingerprint TTL true comparison. This generally works for LANs.

           * loose: Check if the IP header's TTL is less than the fingerprint one. Works for globally-routable addresses.
           * skip: Do not compare the TTL at all.

       Using osf expression.

           # Accept packets that match the "Linux" OS genre signature without comparing TTL.
           table inet x {
               chain y {
                   type filter hook input priority filter; policy accept;
                   osf ttl skip name "Linux"
               }
           }

   FIB EXPRESSIONS
           fib {saddr | daddr | mark | iif | oif} [. ...] {oif | oifname | type}

       A fib expression queries the fib (forwarding information base) to obtain information such
       as the output interface index a particular address would use. The input is a tuple of
       elements that is used as input to the fib lookup functions.

       Table 33. fib expression specific types
       ┌────────┬────────────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├────────┼────────────────────────┼──────────────────┤
       │        │                        │                  │
       │oif     │ Output interface index │ integer (32 bit) │
       ├────────┼────────────────────────┼──────────────────┤
       │        │                        │                  │
       │oifname │ Output interface name  │ string           │
       ├────────┼────────────────────────┼──────────────────┤
       │        │                        │                  │
       │type    │ Address type           │ fib_addrtype     │
       └────────┴────────────────────────┴──────────────────┘

       Use nft describe fib_addrtype to get a list of all address types.

       Using fib expressions.

           # drop packets without a reverse path
           filter prerouting fib saddr . iif oif missing drop

           In this example, 'saddr . iif' looks up routing information based on the source address and the input interface.
           oif picks the output interface index from the routing information.
           If no route was found for the source address/input interface combination, the output interface index is zero.
           In case the input interface is specified as part of the input key, the output interface index is always the same as the input interface index or zero.
           If only 'saddr oif' is given, then oif can be any interface index or zero.

           # drop packets to address not configured on incoming interface
           filter prerouting fib daddr . iif type != { local, broadcast, multicast } drop

           # perform lookup in a specific 'blackhole' table (0xdead, needs ip appropriate ip rule)
           filter prerouting meta mark set 0xdead fib daddr . mark type vmap { blackhole : drop, prohibit : jump prohibited, unreachable : drop }

   ROUTING EXPRESSIONS
           rt [ip | ip6] {classid | nexthop | mtu | ipsec}

       A routing expression refers to routing data associated with a packet.

       Table 34. Routing expression types
       ┌────────┬──────────────────────────┬─────────────────────┐
       │KeywordDescriptionType                │
       ├────────┼──────────────────────────┼─────────────────────┤
       │        │                          │                     │
       │classid │ Routing realm            │ realm               │
       ├────────┼──────────────────────────┼─────────────────────┤
       │        │                          │                     │
       │nexthop │ Routing nexthop          │ ipv4_addr/ipv6_addr │
       ├────────┼──────────────────────────┼─────────────────────┤
       │        │                          │                     │
       │mtu     │ TCP maximum segment size │ integer (16 bit)    │
       │        │ of route                 │                     │
       ├────────┼──────────────────────────┼─────────────────────┤
       │        │                          │                     │
       │ipsec   │ route via ipsec tunnel   │ boolean             │
       │        │ or transport             │                     │
       └────────┴──────────────────────────┴─────────────────────┘

       Table 35. Routing expression specific types
       ┌──────┬─────────────────────────────────┐
       │TypeDescription                     │
       ├──────┼─────────────────────────────────┤
       │      │                                 │
       │realm │ Routing Realm (32 bit number).  │
       │      │ Can be specified numerically or │
       │      │ as symbolic name defined in     │
       │      │ /etc/iproute2/rt_realms.        │
       └──────┴─────────────────────────────────┘

       Using routing expressions.

           # IP family independent rt expression
           filter output rt classid 10

           # IP family dependent rt expressions
           ip filter output rt nexthop 192.168.0.1
           ip6 filter output rt nexthop fd00::1
           inet filter output rt ip nexthop 192.168.0.1
           inet filter output rt ip6 nexthop fd00::1

           # outgoing packet will be encapsulated/encrypted by ipsec
           filter output rt ipsec exists

   IPSEC EXPRESSIONS
           ipsec {in | out} [ spnum NUM ]  {reqid | spi}
           ipsec {in | out} [ spnum NUM ]  {ip | ip6} {saddr | daddr}

       An ipsec expression refers to ipsec data associated with a packet.

       The in or out keyword needs to be used to specify if the expression should examine inbound
       or outbound policies. The in keyword can be used in the prerouting, input and forward
       hooks. The out keyword applies to forward, output and postrouting hooks. The optional
       keyword spnum can be used to match a specific state in a chain, it defaults to 0.

       Table 36. Ipsec expression types
       ┌────────┬──────────────────────────┬─────────────────────┐
       │KeywordDescriptionType                │
       ├────────┼──────────────────────────┼─────────────────────┤
       │        │                          │                     │
       │reqid   │ Request ID               │ integer (32 bit)    │
       ├────────┼──────────────────────────┼─────────────────────┤
       │        │                          │                     │
       │spi     │ Security Parameter Index │ integer (32 bit)    │
       ├────────┼──────────────────────────┼─────────────────────┤
       │        │                          │                     │
       │saddr   │ Source address of the    │ ipv4_addr/ipv6_addr │
       │        │ tunnel                   │                     │
       ├────────┼──────────────────────────┼─────────────────────┤
       │        │                          │                     │
       │daddr   │ Destination address of   │ ipv4_addr/ipv6_addr │
       │        │ the tunnel               │                     │
       └────────┴──────────────────────────┴─────────────────────┘

       Note: When using xfrm_interface, this expression is not useable in output hook as the
       plain packet does not traverse it with IPsec info attached - use a chain in postrouting
       hook instead.

   NUMGEN EXPRESSION
           numgen {inc | random} mod NUM [ offset NUM ]

       Create a number generator. The inc or random keywords control its operation mode: In inc
       mode, the last returned value is simply incremented. In random mode, a new random number
       is returned. The value after mod keyword specifies an upper boundary (read: modulus) which
       is not reached by returned numbers. The optional offset allows one to increment the
       returned value by a fixed offset.

       A typical use-case for numgen is load-balancing:

       Using numgen expression.

           # round-robin between 192.168.10.100 and 192.168.20.200:
           add rule nat prerouting dnat to numgen inc mod 2 map \
                   { 0 : 192.168.10.100, 1 : 192.168.20.200 }

           # probability-based with odd bias using intervals:
           add rule nat prerouting dnat to numgen random mod 10 map \
                   { 0-2 : 192.168.10.100, 3-9 : 192.168.20.200 }

   HASH EXPRESSIONS
           jhash {ip saddr | ip6 daddr | tcp dport | udp sport | ether saddr} [. ...] mod NUM [ seed NUM ] [ offset NUM ]
           symhash mod NUM [ offset NUM ]

       Use a hashing function to generate a number. The functions available are jhash, known as
       Jenkins Hash, and symhash, for Symmetric Hash. The jhash requires an expression to
       determine the parameters of the packet header to apply the hashing, concatenations are
       possible as well. The value after mod keyword specifies an upper boundary (read: modulus)
       which is not reached by returned numbers. The optional seed is used to specify an init
       value used as seed in the hashing function. The optional offset allows one to increment
       the returned value by a fixed offset.

       A typical use-case for jhash and symhash is load-balancing:

       Using hash expressions.

           # load balance based on source ip between 2 ip addresses:
           add rule nat prerouting dnat to jhash ip saddr mod 2 map \
                   { 0 : 192.168.10.100, 1 : 192.168.20.200 }

           # symmetric load balancing between 2 ip addresses:
           add rule nat prerouting dnat to symhash mod 2 map \
                   { 0 : 192.168.10.100, 1 : 192.168.20.200 }

PAYLOAD EXPRESSIONS

       Payload expressions refer to data from the packet’s payload.

   ETHERNET HEADER EXPRESSION
           ether {daddr | saddr | type}

       Table 37. Ethernet header expression types
       ┌────────┬─────────────────────────┬────────────┐
       │KeywordDescriptionType       │
       ├────────┼─────────────────────────┼────────────┤
       │        │                         │            │
       │daddr   │ Destination MAC address │ ether_addr │
       ├────────┼─────────────────────────┼────────────┤
       │        │                         │            │
       │saddr   │ Source MAC address      │ ether_addr │
       ├────────┼─────────────────────────┼────────────┤
       │        │                         │            │
       │type    │ EtherType               │ ether_type │
       └────────┴─────────────────────────┴────────────┘

   VLAN HEADER EXPRESSION
           vlan {id | dei | pcp | type}

       The vlan expression is used to match on the vlan header fields. This expression will not
       work in the ip, ip6 and inet families, unless the vlan interface is configured with the
       reorder_hdr off setting. The default is reorder_hdr on which will automatically remove the
       vlan tag from the packet. See ip-link(8) for more information. For these families its
       easier to match the vlan interface name instead, using the meta iif or meta iifname
       expression.

       Table 38. VLAN header expression
       ┌────────┬─────────────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├────────┼─────────────────────────┼──────────────────┤
       │        │                         │                  │
       │id      │ VLAN ID (VID)           │ integer (12 bit) │
       ├────────┼─────────────────────────┼──────────────────┤
       │        │                         │                  │
       │dei     │ Drop Eligible Indicator │ integer (1 bit)  │
       ├────────┼─────────────────────────┼──────────────────┤
       │        │                         │                  │
       │pcp     │ Priority code point     │ integer (3 bit)  │
       ├────────┼─────────────────────────┼──────────────────┤
       │        │                         │                  │
       │type    │ EtherType               │ ether_type       │
       └────────┴─────────────────────────┴──────────────────┘

   ARP HEADER EXPRESSION
           arp {htype | ptype | hlen | plen | operation | saddr { ip | ether } | daddr { ip | ether }

       Table 39. ARP header expression
       ┌────────────┬─────────────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├────────────┼─────────────────────────┼──────────────────┤
       │            │                         │                  │
       │htype       │ ARP hardware type       │ integer (16 bit) │
       ├────────────┼─────────────────────────┼──────────────────┤
       │            │                         │                  │
       │ptype       │ EtherType               │ ether_type       │
       ├────────────┼─────────────────────────┼──────────────────┤
       │            │                         │                  │
       │hlen        │ Hardware address len    │ integer (8 bit)  │
       ├────────────┼─────────────────────────┼──────────────────┤
       │            │                         │                  │
       │plen        │ Protocol address len    │ integer (8 bit)  │
       ├────────────┼─────────────────────────┼──────────────────┤
       │            │                         │                  │
       │operation   │ Operation               │ arp_op           │
       ├────────────┼─────────────────────────┼──────────────────┤
       │            │                         │                  │
       │saddr ether │ Ethernet sender address │ ether_addr       │
       ├────────────┼─────────────────────────┼──────────────────┤
       │            │                         │                  │
       │daddr ether │ Ethernet target address │ ether_addr       │
       ├────────────┼─────────────────────────┼──────────────────┤
       │            │                         │                  │
       │saddr ip    │ IPv4 sender address     │ ipv4_addr        │
       ├────────────┼─────────────────────────┼──────────────────┤
       │            │                         │                  │
       │daddr ip    │ IPv4 target address     │ ipv4_addr        │
       └────────────┴─────────────────────────┴──────────────────┘

   IPV4 HEADER EXPRESSION
           ip {version | hdrlength | dscp | ecn | length | id | frag-off | ttl | protocol | checksum | saddr | daddr }

       Table 40. IPv4 header expression
       ┌──────────┬─────────────────────────┬───────────────────────┐
       │KeywordDescriptionType                  │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │version   │ IP header version (4)   │ integer (4 bit)       │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │hdrlength │ IP header length        │ integer (4 bit) FIXME │
       │          │ including options       │ scaling               │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │dscp      │ Differentiated Services │ dscp                  │
       │          │ Code Point              │                       │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │ecn       │ Explicit Congestion     │ ecn                   │
       │          │ Notification            │                       │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │length    │ Total packet length     │ integer (16 bit)      │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │id        │ IP ID                   │ integer (16 bit)      │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │frag-off  │ Fragment offset         │ integer (16 bit)      │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │ttl       │ Time to live            │ integer (8 bit)       │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │protocol  │ Upper layer protocol    │ inet_proto            │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │checksum  │ IP header checksum      │ integer (16 bit)      │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │saddr     │ Source address          │ ipv4_addr             │
       ├──────────┼─────────────────────────┼───────────────────────┤
       │          │                         │                       │
       │daddr     │ Destination address     │ ipv4_addr             │
       └──────────┴─────────────────────────┴───────────────────────┘

   ICMP HEADER EXPRESSION
           icmp {type | code | checksum | id | sequence | gateway | mtu}

       This expression refers to ICMP header fields. When using it in inet, bridge or netdev
       families, it will cause an implicit dependency on IPv4 to be created. To match on unusual
       cases like ICMP over IPv6, one has to add an explicit meta protocol ip6 match to the rule.

       Table 41. ICMP header expression
       ┌─────────┬─────────────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├─────────┼─────────────────────────┼──────────────────┤
       │         │                         │                  │
       │type     │ ICMP type field         │ icmp_type        │
       ├─────────┼─────────────────────────┼──────────────────┤
       │         │                         │                  │
       │code     │ ICMP code field         │ integer (8 bit)  │
       ├─────────┼─────────────────────────┼──────────────────┤
       │         │                         │                  │
       │checksum │ ICMP checksum field     │ integer (16 bit) │
       ├─────────┼─────────────────────────┼──────────────────┤
       │         │                         │                  │
       │id       │ ID of echo              │ integer (16 bit) │
       │         │ request/response        │                  │
       ├─────────┼─────────────────────────┼──────────────────┤
       │         │                         │                  │
       │sequence │ sequence number of echo │ integer (16 bit) │
       │         │ request/response        │                  │
       ├─────────┼─────────────────────────┼──────────────────┤
       │         │                         │                  │
       │gateway  │ gateway of redirects    │ integer (32 bit) │
       ├─────────┼─────────────────────────┼──────────────────┤
       │         │                         │                  │
       │mtu      │ MTU of path MTU         │ integer (16 bit) │
       │         │ discovery               │                  │
       └─────────┴─────────────────────────┴──────────────────┘

   IGMP HEADER EXPRESSION
           igmp {type | mrt | checksum | group}

       This expression refers to IGMP header fields. When using it in inet, bridge or netdev
       families, it will cause an implicit dependency on IPv4 to be created. To match on unusual
       cases like IGMP over IPv6, one has to add an explicit meta protocol ip6 match to the rule.

       Table 42. IGMP header expression
       ┌─────────┬───────────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├─────────┼───────────────────────┼──────────────────┤
       │         │                       │                  │
       │type     │ IGMP type field       │ igmp_type        │
       ├─────────┼───────────────────────┼──────────────────┤
       │         │                       │                  │
       │mrt      │ IGMP maximum response │ integer (8 bit)  │
       │         │ time field            │                  │
       ├─────────┼───────────────────────┼──────────────────┤
       │         │                       │                  │
       │checksum │ IGMP checksum field   │ integer (16 bit) │
       ├─────────┼───────────────────────┼──────────────────┤
       │         │                       │                  │
       │group    │ Group address         │ integer (32 bit) │
       └─────────┴───────────────────────┴──────────────────┘

   IPV6 HEADER EXPRESSION
           ip6 {version | dscp | ecn | flowlabel | length | nexthdr | hoplimit | saddr | daddr}

       This expression refers to the ipv6 header fields. Caution when using ip6 nexthdr, the
       value only refers to the next header, i.e. ip6 nexthdr tcp will only match if the ipv6
       packet does not contain any extension headers. Packets that are fragmented or e.g. contain
       a routing extension headers will not be matched. Please use meta l4proto if you wish to
       match the real transport header and ignore any additional extension headers instead.

       Table 43. IPv6 header expression
       ┌──────────┬─────────────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├──────────┼─────────────────────────┼──────────────────┤
       │          │                         │                  │
       │version   │ IP header version (6)   │ integer (4 bit)  │
       ├──────────┼─────────────────────────┼──────────────────┤
       │          │                         │                  │
       │dscp      │ Differentiated Services │ dscp             │
       │          │ Code Point              │                  │
       ├──────────┼─────────────────────────┼──────────────────┤
       │          │                         │                  │
       │ecn       │ Explicit Congestion     │ ecn              │
       │          │ Notification            │                  │
       ├──────────┼─────────────────────────┼──────────────────┤
       │          │                         │                  │
       │flowlabel │ Flow label              │ integer (20 bit) │
       ├──────────┼─────────────────────────┼──────────────────┤
       │          │                         │                  │
       │length    │ Payload length          │ integer (16 bit) │
       ├──────────┼─────────────────────────┼──────────────────┤
       │          │                         │                  │
       │nexthdr   │ Nexthdr protocol        │ inet_proto       │
       ├──────────┼─────────────────────────┼──────────────────┤
       │          │                         │                  │
       │hoplimit  │ Hop limit               │ integer (8 bit)  │
       ├──────────┼─────────────────────────┼──────────────────┤
       │          │                         │                  │
       │saddr     │ Source address          │ ipv6_addr        │
       ├──────────┼─────────────────────────┼──────────────────┤
       │          │                         │                  │
       │daddr     │ Destination address     │ ipv6_addr        │
       └──────────┴─────────────────────────┴──────────────────┘

       Using ip6 header expressions.

           # matching if first extension header indicates a fragment
           ip6 nexthdr ipv6-frag

   ICMPV6 HEADER EXPRESSION
           icmpv6 {type | code | checksum | parameter-problem | packet-too-big | id | sequence | max-delay}

       This expression refers to ICMPv6 header fields. When using it in inet, bridge or netdev
       families, it will cause an implicit dependency on IPv6 to be created. To match on unusual
       cases like ICMPv6 over IPv4, one has to add an explicit meta protocol ip match to the
       rule.

       Table 44. ICMPv6 header expression
       ┌──────────────────┬─────────────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├──────────────────┼─────────────────────────┼──────────────────┤
       │                  │                         │                  │
       │type              │ ICMPv6 type field       │ icmpv6_type      │
       ├──────────────────┼─────────────────────────┼──────────────────┤
       │                  │                         │                  │
       │code              │ ICMPv6 code field       │ integer (8 bit)  │
       ├──────────────────┼─────────────────────────┼──────────────────┤
       │                  │                         │                  │
       │checksum          │ ICMPv6 checksum field   │ integer (16 bit) │
       ├──────────────────┼─────────────────────────┼──────────────────┤
       │                  │                         │                  │
       │parameter-problem │ pointer to problem      │ integer (32 bit) │
       ├──────────────────┼─────────────────────────┼──────────────────┤
       │                  │                         │                  │
       │packet-too-big    │ oversized MTU           │ integer (32 bit) │
       ├──────────────────┼─────────────────────────┼──────────────────┤
       │                  │                         │                  │
       │id                │ ID of echo              │ integer (16 bit) │
       │                  │ request/response        │                  │
       ├──────────────────┼─────────────────────────┼──────────────────┤
       │                  │                         │                  │
       │sequence          │ sequence number of echo │ integer (16 bit) │
       │                  │ request/response        │                  │
       ├──────────────────┼─────────────────────────┼──────────────────┤
       │                  │                         │                  │
       │max-delay         │ maximum response delay  │ integer (16 bit) │
       │                  │ of MLD queries          │                  │
       └──────────────────┴─────────────────────────┴──────────────────┘

   TCP HEADER EXPRESSION
           tcp {sport | dport | sequence | ackseq | doff | reserved | flags | window | checksum | urgptr}

       Table 45. TCP header expression
       ┌─────────┬────────────────────────┬───────────────────────┐
       │KeywordDescriptionType                  │
       ├─────────┼────────────────────────┼───────────────────────┤
       │         │                        │                       │
       │sport    │ Source port            │ inet_service          │
       ├─────────┼────────────────────────┼───────────────────────┤
       │         │                        │                       │
       │dport    │ Destination port       │ inet_service          │
       ├─────────┼────────────────────────┼───────────────────────┤
       │         │                        │                       │
       │sequence │ Sequence number        │ integer (32 bit)      │
       ├─────────┼────────────────────────┼───────────────────────┤
       │         │                        │                       │
       │ackseq   │ Acknowledgement number │ integer (32 bit)      │
       ├─────────┼────────────────────────┼───────────────────────┤
       │         │                        │                       │
       │doff     │ Data offset            │ integer (4 bit) FIXME │
       │         │                        │ scaling               │
       ├─────────┼────────────────────────┼───────────────────────┤
       │         │                        │                       │
       │reserved │ Reserved area          │ integer (4 bit)       │
       ├─────────┼────────────────────────┼───────────────────────┤
       │         │                        │                       │
       │flags    │ TCP flags              │ tcp_flag              │
       ├─────────┼────────────────────────┼───────────────────────┤
       │         │                        │                       │
       │window   │ Window                 │ integer (16 bit)      │
       ├─────────┼────────────────────────┼───────────────────────┤
       │         │                        │                       │
       │checksum │ Checksum               │ integer (16 bit)      │
       ├─────────┼────────────────────────┼───────────────────────┤
       │         │                        │                       │
       │urgptr   │ Urgent pointer         │ integer (16 bit)      │
       └─────────┴────────────────────────┴───────────────────────┘

   UDP HEADER EXPRESSION
           udp {sport | dport | length | checksum}

       Table 46. UDP header expression
       ┌─────────┬─────────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├─────────┼─────────────────────┼──────────────────┤
       │         │                     │                  │
       │sport    │ Source port         │ inet_service     │
       ├─────────┼─────────────────────┼──────────────────┤
       │         │                     │                  │
       │dport    │ Destination port    │ inet_service     │
       ├─────────┼─────────────────────┼──────────────────┤
       │         │                     │                  │
       │length   │ Total packet length │ integer (16 bit) │
       ├─────────┼─────────────────────┼──────────────────┤
       │         │                     │                  │
       │checksum │ Checksum            │ integer (16 bit) │
       └─────────┴─────────────────────┴──────────────────┘

   UDP-LITE HEADER EXPRESSION
           udplite {sport | dport | checksum}

       Table 47. UDP-Lite header expression
       ┌─────────┬──────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├─────────┼──────────────────┼──────────────────┤
       │         │                  │                  │
       │sport    │ Source port      │ inet_service     │
       ├─────────┼──────────────────┼──────────────────┤
       │         │                  │                  │
       │dport    │ Destination port │ inet_service     │
       ├─────────┼──────────────────┼──────────────────┤
       │         │                  │                  │
       │checksum │ Checksum         │ integer (16 bit) │
       └─────────┴──────────────────┴──────────────────┘

   SCTP HEADER EXPRESSION
           sctp {sport | dport | vtag | checksum}
           sctp chunk CHUNK [ FIELD ]

           CHUNK := data | init | init-ack | sack | heartbeat |
                      heartbeat-ack | abort | shutdown | shutdown-ack | error |
                      cookie-echo | cookie-ack | ecne | cwr | shutdown-complete
                      | asconf-ack | forward-tsn | asconf

           FIELD := COMMON_FIELD | DATA_FIELD | INIT_FIELD | INIT_ACK_FIELD |
                      SACK_FIELD | SHUTDOWN_FIELD | ECNE_FIELD | CWR_FIELD |
                      ASCONF_ACK_FIELD | FORWARD_TSN_FIELD | ASCONF_FIELD

           COMMON_FIELD := type | flags | length
           DATA_FIELD := tsn | stream | ssn | ppid
           INIT_FIELD := init-tag | a-rwnd | num-outbound-streams |
                           num-inbound-streams | initial-tsn
           INIT_ACK_FIELD := INIT_FIELD
           SACK_FIELD := cum-tsn-ack | a-rwnd | num-gap-ack-blocks |
                           num-dup-tsns
           SHUTDOWN_FIELD := cum-tsn-ack
           ECNE_FIELD := lowest-tsn
           CWR_FIELD := lowest-tsn
           ASCONF_ACK_FIELD := seqno
           FORWARD_TSN_FIELD := new-cum-tsn
           ASCONF_FIELD := seqno

       Table 48. SCTP header expression
       ┌─────────┬────────────────────────┬────────────────────────┐
       │KeywordDescriptionType                   │
       ├─────────┼────────────────────────┼────────────────────────┤
       │         │                        │                        │
       │sport    │ Source port            │ inet_service           │
       ├─────────┼────────────────────────┼────────────────────────┤
       │         │                        │                        │
       │dport    │ Destination port       │ inet_service           │
       ├─────────┼────────────────────────┼────────────────────────┤
       │         │                        │                        │
       │vtag     │ Verification Tag       │ integer (32 bit)       │
       ├─────────┼────────────────────────┼────────────────────────┤
       │         │                        │                        │
       │checksum │ Checksum               │ integer (32 bit)       │
       ├─────────┼────────────────────────┼────────────────────────┤
       │         │                        │                        │
       │chunk    │ Search chunk in packet │ without FIELD, boolean │
       │         │                        │ indicating existence   │
       └─────────┴────────────────────────┴────────────────────────┘

       Table 49. SCTP chunk fields
       ┌─────────────────────┬───────────────┬────────────────────┬─────────────────────┐
       │NameWidth in bitsChunkNotes               │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │type                 │ 8             │ all                │ not useful, defined │
       │                     │               │                    │ by chunk type       │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │flags                │ 8             │ all                │ semantics defined   │
       │                     │               │                    │ on per-chunk basis  │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │length               │ 16            │ all                │ length of this      │
       │                     │               │                    │ chunk in bytes      │
       │                     │               │                    │ excluding padding   │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │tsn                  │ 32            │ data               │ transmission        │
       │                     │               │                    │ sequence number     │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │stream               │ 16            │ data               │ stream identifier   │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │ssn                  │ 16            │ data               │ stream sequence     │
       │                     │               │                    │ number              │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │ppid                 │ 32            │ data               │ payload protocol    │
       │                     │               │                    │ identifier          │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │init-tag             │ 32            │ init, init-ack     │ initiate tag        │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │a-rwnd               │ 32            │ init, init-ack,    │ advertised receiver │
       │                     │               │ sack               │ window credit       │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │num-outbound-streams │ 16            │ init, init-ack     │ number of outbound  │
       │                     │               │                    │ streams             │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │num-inbound-streams  │ 16            │ init, init-ack     │ number of inbound   │
       │                     │               │                    │ streams             │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │initial-tsn          │ 32            │ init, init-ack     │ initial transmit    │
       │                     │               │                    │ sequence number     │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │cum-tsn-ack          │ 32            │ sack, shutdown     │ cumulative          │
       │                     │               │                    │ transmission        │
       │                     │               │                    │ sequence number     │
       │                     │               │                    │ acknowledged        │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │num-gap-ack-blocks   │ 16            │ sack               │ number of Gap Ack   │
       │                     │               │                    │ Blocks included     │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │num-dup-tsns         │ 16            │ sack               │ number of duplicate │
       │                     │               │                    │ transmission        │
       │                     │               │                    │ sequence numbers    │
       │                     │               │                    │ received            │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │lowest-tsn           │ 32            │ ecne, cwr          │ lowest transmission │
       │                     │               │                    │ sequence number     │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │seqno                │ 32            │ asconf-ack, asconf │ sequence number     │
       ├─────────────────────┼───────────────┼────────────────────┼─────────────────────┤
       │                     │               │                    │                     │
       │new-cum-tsn          │ 32            │ forward-tsn        │ new cumulative      │
       │                     │               │                    │ transmission        │
       │                     │               │                    │ sequence number     │
       └─────────────────────┴───────────────┴────────────────────┴─────────────────────┘

   DCCP HEADER EXPRESSION
           dccp {sport | dport | type}

       Table 50. DCCP header expression
       ┌────────┬──────────────────┬──────────────┐
       │KeywordDescriptionType         │
       ├────────┼──────────────────┼──────────────┤
       │        │                  │              │
       │sport   │ Source port      │ inet_service │
       ├────────┼──────────────────┼──────────────┤
       │        │                  │              │
       │dport   │ Destination port │ inet_service │
       ├────────┼──────────────────┼──────────────┤
       │        │                  │              │
       │type    │ Packet type      │ dccp_pkttype │
       └────────┴──────────────────┴──────────────┘

   AUTHENTICATION HEADER EXPRESSION
           ah {nexthdr | hdrlength | reserved | spi | sequence}

       Table 51. AH header expression
       ┌──────────┬──────────────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├──────────┼──────────────────────────┼──────────────────┤
       │          │                          │                  │
       │nexthdr   │ Next header protocol     │ inet_proto       │
       ├──────────┼──────────────────────────┼──────────────────┤
       │          │                          │                  │
       │hdrlength │ AH Header length         │ integer (8 bit)  │
       ├──────────┼──────────────────────────┼──────────────────┤
       │          │                          │                  │
       │reserved  │ Reserved area            │ integer (16 bit) │
       ├──────────┼──────────────────────────┼──────────────────┤
       │          │                          │                  │
       │spi       │ Security Parameter Index │ integer (32 bit) │
       ├──────────┼──────────────────────────┼──────────────────┤
       │          │                          │                  │
       │sequence  │ Sequence number          │ integer (32 bit) │
       └──────────┴──────────────────────────┴──────────────────┘

   ENCRYPTED SECURITY PAYLOAD HEADER EXPRESSION
           esp {spi | sequence}

       Table 52. ESP header expression
       ┌─────────┬──────────────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├─────────┼──────────────────────────┼──────────────────┤
       │         │                          │                  │
       │spi      │ Security Parameter Index │ integer (32 bit) │
       ├─────────┼──────────────────────────┼──────────────────┤
       │         │                          │                  │
       │sequence │ Sequence number          │ integer (32 bit) │
       └─────────┴──────────────────────────┴──────────────────┘

   IPCOMP HEADER EXPRESSION
       comp {nexthdr | flags | cpi}

       Table 53. IPComp header expression
       ┌────────┬───────────────────────┬──────────────────┐
       │KeywordDescriptionType             │
       ├────────┼───────────────────────┼──────────────────┤
       │        │                       │                  │
       │nexthdr │ Next header protocol  │ inet_proto       │
       ├────────┼───────────────────────┼──────────────────┤
       │        │                       │                  │
       │flags   │ Flags                 │ bitmask          │
       ├────────┼───────────────────────┼──────────────────┤
       │        │                       │                  │
       │cpi     │ compression Parameter │ integer (16 bit) │
       │        │ Index                 │                  │
       └────────┴───────────────────────┴──────────────────┘

   RAW PAYLOAD EXPRESSION
           @base,offset,length

       The raw payload expression instructs to load length bits starting at offset bits. Bit 0
       refers to the very first bit — in the C programming language, this corresponds to the
       topmost bit, i.e. 0x80 in case of an octet. They are useful to match headers that do not
       have a human-readable template expression yet. Note that nft will not add dependencies for
       Raw payload expressions. If you e.g. want to match protocol fields of a transport header
       with protocol number 5, you need to manually exclude packets that have a different
       transport header, for instance by using meta l4proto 5 before the raw expression.

       Table 54. Supported payload protocol bases
       ┌─────┬──────────────────────────────────┐
       │BaseDescription                      │
       ├─────┼──────────────────────────────────┤
       │     │                                  │
       │ll   │ Link layer, for example the      │
       │     │ Ethernet header                  │
       ├─────┼──────────────────────────────────┤
       │     │                                  │
       │nh   │ Network header, for example IPv4 │
       │     │ or IPv6                          │
       ├─────┼──────────────────────────────────┤
       │     │                                  │
       │th   │ Transport Header, for example    │
       │     │ TCP                              │
       ├─────┼──────────────────────────────────┤
       │     │                                  │
       │ih   │ Inner Header / Payload, i.e.     │
       │     │ after the L4 transport level     │
       │     │ header                           │
       └─────┴──────────────────────────────────┘

       Matching destination port of both UDP and TCP.

           inet filter input meta l4proto {tcp, udp} @th,16,16 { 53, 80 }

       The above can also be written as

           inet filter input meta l4proto {tcp, udp} th dport { 53, 80 }

       it is more convenient, but like the raw expression notation no dependencies are created or
       checked. It is the users responsibility to restrict matching to those header types that
       have a notion of ports. Otherwise, rules using raw expressions will errnously match
       unrelated packets, e.g. mis-interpreting ESP packets SPI field as a port.

       Rewrite arp packet target hardware address if target protocol address matches a given
       address.

           input meta iifname enp2s0 arp ptype 0x0800 arp htype 1 arp hlen 6 arp plen 4 @nh,192,32 0xc0a88f10 @nh,144,48 set 0x112233445566 accept

   EXTENSION HEADER EXPRESSIONS
       Extension header expressions refer to data from variable-sized protocol headers, such as
       IPv6 extension headers, TCP options and IPv4 options.

       nftables currently supports matching (finding) a given ipv6 extension header, TCP option
       or IPv4 option.

           hbh {nexthdr | hdrlength}
           frag {nexthdr | frag-off | more-fragments | id}
           rt {nexthdr | hdrlength | type | seg-left}
           dst {nexthdr | hdrlength}
           mh {nexthdr | hdrlength | checksum | type}
           srh {flags | tag | sid | seg-left}
           tcp option {eol | nop | maxseg | window | sack-perm | sack | sack0 | sack1 | sack2 | sack3 | timestamp} tcp_option_field
           ip option { lsrr | ra | rr | ssrr } ip_option_field

       The following syntaxes are valid only in a relational expression with boolean type on
       right-hand side for checking header existence only:

           exthdr {hbh | frag | rt | dst | mh}
           tcp option {eol | nop | maxseg | window | sack-perm | sack | sack0 | sack1 | sack2 | sack3 | timestamp}
           ip option { lsrr | ra | rr | ssrr }

       Table 55. IPv6 extension headers
       ┌────────┬────────────────────────┐
       │KeywordDescription            │
       ├────────┼────────────────────────┤
       │        │                        │
       │hbh     │ Hop by Hop             │
       ├────────┼────────────────────────┤
       │        │                        │
       │rt      │ Routing Header         │
       ├────────┼────────────────────────┤
       │        │                        │
       │frag    │ Fragmentation header   │
       ├────────┼────────────────────────┤
       │        │                        │
       │dst     │ dst options            │
       ├────────┼────────────────────────┤
       │        │                        │
       │mh      │ Mobility Header        │
       ├────────┼────────────────────────┤
       │        │                        │
       │srh     │ Segment Routing Header │
       └────────┴────────────────────────┘

       Table 56. TCP Options
       ┌──────────┬──────────────────────────┬──────────────────────┐
       │KeywordDescriptionTCP option fields    │
       ├──────────┼──────────────────────────┼──────────────────────┤
       │          │                          │                      │
       │eol       │ End if option list       │ -                    │
       ├──────────┼──────────────────────────┼──────────────────────┤
       │          │                          │                      │
       │nop       │ 1 Byte TCP Nop padding   │ -                    │
       │          │ option                   │                      │
       ├──────────┼──────────────────────────┼──────────────────────┤
       │          │                          │                      │
       │maxseg    │ TCP Maximum Segment Size │ length, size         │
       ├──────────┼──────────────────────────┼──────────────────────┤
       │          │                          │                      │
       │window    │ TCP Window Scaling       │ length, count        │
       ├──────────┼──────────────────────────┼──────────────────────┤
       │          │                          │                      │
       │sack-perm │ TCP SACK permitted       │ length               │
       ├──────────┼──────────────────────────┼──────────────────────┤
       │          │                          │                      │
       │sack      │ TCP Selective            │ length, left, right  │
       │          │ Acknowledgement (alias   │                      │
       │          │ of block 0)              │                      │
       ├──────────┼──────────────────────────┼──────────────────────┤
       │          │                          │                      │
       │sack0     │ TCP Selective            │ length, left, right  │
       │          │ Acknowledgement (block   │                      │
       │          │ 0)                       │                      │
       ├──────────┼──────────────────────────┼──────────────────────┤
       │          │                          │                      │
       │sack1     │ TCP Selective            │ length, left, right  │
       │          │ Acknowledgement (block   │                      │
       │          │ 1)                       │                      │
       ├──────────┼──────────────────────────┼──────────────────────┤
       │          │                          │                      │
       │sack2     │ TCP Selective            │ length, left, right  │
       │          │ Acknowledgement (block   │                      │
       │          │ 2)                       │                      │
       ├──────────┼──────────────────────────┼──────────────────────┤
       │          │                          │                      │
       │sack3     │ TCP Selective            │ length, left, right  │
       │          │ Acknowledgement (block   │                      │
       │          │ 3)                       │                      │
       ├──────────┼──────────────────────────┼──────────────────────┤
       │          │                          │                      │
       │timestamp │ TCP Timestamps           │ length, tsval, tsecr │
       └──────────┴──────────────────────────┴──────────────────────┘

       TCP option matching also supports raw expression syntax to access arbitrary options:

           tcp option

           tcp option @number,offset,length

       Table 57. IP Options
       ┌────────┬─────────────────────┬─────────────────────────┐
       │KeywordDescriptionIP option fields        │
       ├────────┼─────────────────────┼─────────────────────────┤
       │        │                     │                         │
       │lsrr    │ Loose Source Route  │ type, length, ptr, addr │
       ├────────┼─────────────────────┼─────────────────────────┤
       │        │                     │                         │
       │ra      │ Router Alert        │ type, length, value     │
       ├────────┼─────────────────────┼─────────────────────────┤
       │        │                     │                         │
       │rr      │ Record Route        │ type, length, ptr, addr │
       ├────────┼─────────────────────┼─────────────────────────┤
       │        │                     │                         │
       │ssrr    │ Strict Source Route │ type, length, ptr, addr │
       └────────┴─────────────────────┴─────────────────────────┘

       finding TCP options.

           filter input tcp option sack-perm exists counter

       matching TCP options.

           filter input tcp option maxseg size lt 536

       matching IPv6 exthdr.

           ip6 filter input frag more-fragments 1 counter

       finding IP option.

           filter input ip option lsrr exists counter

   CONNTRACK EXPRESSIONS
       Conntrack expressions refer to meta data of the connection tracking entry associated with
       a packet.

       There are three types of conntrack expressions. Some conntrack expressions require the
       flow direction before the conntrack key, others must be used directly because they are
       direction agnostic. The packets, bytes and avgpkt keywords can be used with or without a
       direction. If the direction is omitted, the sum of the original and the reply direction is
       returned. The same is true for the zone, if a direction is given, the zone is only matched
       if the zone id is tied to the given direction.

           ct {state | direction | status | mark | expiration | helper | label | count | id}
           ct [original | reply] {l3proto | protocol | bytes | packets | avgpkt | zone}
           ct {original | reply} {proto-src | proto-dst}
           ct {original | reply} {ip | ip6} {saddr | daddr}

       The conntrack-specific types in this table are described in the sub-section CONNTRACK
       TYPES above.

       Table 58. Conntrack expressions
       ┌───────────┬──────────────────────────┬─────────────────────┐
       │KeywordDescriptionType                │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │state      │ State of the connection  │ ct_state            │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │direction  │ Direction of the packet  │ ct_dir              │
       │           │ relative to the          │                     │
       │           │ connection               │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │status     │ Status of the connection │ ct_status           │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │mark       │ Connection mark          │ mark                │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │expiration │ Connection expiration    │ time                │
       │           │ time                     │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │helper     │ Helper associated with   │ string              │
       │           │ the connection           │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │label      │ Connection tracking      │ ct_label            │
       │           │ label bit or symbolic    │                     │
       │           │ name defined in          │                     │
       │           │ connlabel.conf in the    │                     │
       │           │ nftables include path    │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │l3proto    │ Layer 3 protocol of the  │ nf_proto            │
       │           │ connection               │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │saddr      │ Source address of the    │ ipv4_addr/ipv6_addr │
       │           │ connection for the given │                     │
       │           │ direction                │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │daddr      │ Destination address of   │ ipv4_addr/ipv6_addr │
       │           │ the connection for the   │                     │
       │           │ given direction          │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │protocol   │ Layer 4 protocol of the  │ inet_proto          │
       │           │ connection for the given │                     │
       │           │ direction                │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │proto-src  │ Layer 4 protocol source  │ integer (16 bit)    │
       │           │ for the given direction  │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │proto-dst  │ Layer 4 protocol         │ integer (16 bit)    │
       │           │ destination for the      │                     │
       │           │ given direction          │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │packets    │ packet count seen in the │ integer (64 bit)    │
       │           │ given direction or sum   │                     │
       │           │ of original and reply    │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │bytes      │ byte count seen, see     │ integer (64 bit)    │
       │           │ description for packets  │                     │
       │           │ keyword                  │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │avgpkt     │ average bytes per        │ integer (64 bit)    │
       │           │ packet, see description  │                     │
       │           │ for packets keyword      │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │zone       │ conntrack zone           │ integer (16 bit)    │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │count      │ number of current        │ integer (32 bit)    │
       │           │ connections              │                     │
       ├───────────┼──────────────────────────┼─────────────────────┤
       │           │                          │                     │
       │id         │ Connection id            │ ct_id               │
       └───────────┴──────────────────────────┴─────────────────────┘

       restrict the number of parallel connections to a server.

           nft add set filter ssh_flood '{ type ipv4_addr; flags dynamic; }'
           nft add rule filter input tcp dport 22 add @ssh_flood '{ ip saddr ct count over 2 }' reject

STATEMENTS

       Statements represent actions to be performed. They can alter control flow (return, jump to
       a different chain, accept or drop the packet) or can perform actions, such as logging,
       rejecting a packet, etc.

       Statements exist in two kinds. Terminal statements unconditionally terminate evaluation of
       the current rule, non-terminal statements either only conditionally or never terminate
       evaluation of the current rule, in other words, they are passive from the ruleset
       evaluation perspective. There can be an arbitrary amount of non-terminal statements in a
       rule, but only a single terminal statement as the final statement.

   VERDICT STATEMENT
       The verdict statement alters control flow in the ruleset and issues policy decisions for
       packets.

           {accept | drop | queue | continue | return}
           {jump | goto} chain

       accept and drop are absolute verdicts — they terminate ruleset evaluation immediately.

       accept       Terminate ruleset evaluation and
                    accept the packet. The packet
                    can still be dropped later by
                    another hook, for instance
                    accept in the forward hook still
                    allows one to drop the packet
                    later in the postrouting hook,
                    or another forward base chain
                    that has a higher priority
                    number and is evaluated
                    afterwards in the processing
                    pipeline.

       drop         Terminate ruleset evaluation and
                    drop the packet. The drop occurs
                    instantly, no further chains or
                    hooks are evaluated. It is not
                    possible to accept the packet in
                    a later chain again, as those
                    are not evaluated anymore for
                    the packet.

       queue        Terminate ruleset evaluation and
                    queue the packet to userspace.
                    Userspace must provide a drop or
                    accept verdict. In case of
                    accept, processing resumes with
                    the next base chain hook, not
                    the rule following the queue
                    verdict.

       continue     Continue ruleset evaluation with
                    the next rule. This is the
                    default behaviour in case a rule
                    issues no verdict.

       return       Return from the current chain
                    and continue evaluation at the
                    next rule in the last chain. If
                    issued in a base chain, it is
                    equivalent to the base chain
                    policy.

       jump chain   Continue evaluation at the first
                    rule in chain. The current
                    position in the ruleset is
                    pushed to a call stack and
                    evaluation will continue there
                    when the new chain is entirely
                    evaluated or a return verdict is
                    issued. In case an absolute
                    verdict is issued by a rule in
                    the chain, ruleset evaluation
                    terminates immediately and the
                    specific action is taken.

       goto chain   Similar to jump, but the current
                    position is not pushed to the
                    call stack, meaning that after
                    the new chain evaluation will
                    continue at the last chain
                    instead of the one containing
                    the goto statement.

       Using verdict statements.

           # process packets from eth0 and the internal network in from_lan
           # chain, drop all packets from eth0 with different source addresses.

           filter input iif eth0 ip saddr 192.168.0.0/24 jump from_lan
           filter input iif eth0 drop

   PAYLOAD STATEMENT
           payload_expression set value

       The payload statement alters packet content. It can be used for example to set ip DSCP
       (diffserv) header field or ipv6 flow labels.

       route some packets instead of bridging.

           # redirect tcp:http from 192.160.0.0/16 to local machine for routing instead of bridging
           # assumes 00:11:22:33:44:55 is local MAC address.
           bridge input meta iif eth0 ip saddr 192.168.0.0/16 tcp dport 80 meta pkttype set unicast ether daddr set 00:11:22:33:44:55

       Set IPv4 DSCP header field.

           ip forward ip dscp set 42

   EXTENSION HEADER STATEMENT
           extension_header_expression set value

       The extension header statement alters packet content in variable-sized headers. This can
       currently be used to alter the TCP Maximum segment size of packets, similar to the TCPMSS
       target in iptables.

       change tcp mss.

           tcp flags syn tcp option maxseg size set 1360
           # set a size based on route information:
           tcp flags syn tcp option maxseg size set rt mtu

       You can also remove tcp options via reset keyword.

       remove tcp option.

           tcp flags syn reset tcp option sack-perm

   LOG STATEMENT
           log [prefix quoted_string] [level syslog-level] [flags log-flags]
           log group nflog_group [prefix quoted_string] [queue-threshold value] [snaplen size]
           log level audit

       The log statement enables logging of matching packets. When this statement is used from a
       rule, the Linux kernel will print some information on all matching packets, such as header
       fields, via the kernel log (where it can be read with dmesg(1) or read in the syslog).

       In the second form of invocation (if nflog_group is specified), the Linux kernel will pass
       the packet to nfnetlink_log which will send the log through a netlink socket to the
       specified group. One userspace process may subscribe to the group to receive the logs, see
       man(8) ulogd for the Netfilter userspace log daemon and libnetfilter_log documentation for
       details in case you would like to develop a custom program to digest your logs.

       In the third form of invocation (if level audit is specified), the Linux kernel writes a
       message into the audit buffer suitably formatted for reading with auditd. Therefore no
       further formatting options (such as prefix or flags) are allowed in this mode.

       This is a non-terminating statement, so the rule evaluation continues after the packet is
       logged.

       Table 59. log statement options
       ┌────────────────┬──────────────────────────┬──────────────────────────┐
       │KeywordDescriptionType                     │
       ├────────────────┼──────────────────────────┼──────────────────────────┤
       │                │                          │                          │
       │prefix          │ Log message prefix       │ quoted string            │
       ├────────────────┼──────────────────────────┼──────────────────────────┤
       │                │                          │                          │
       │level           │ Syslog level of logging  │ string: emerg, alert,    │
       │                │                          │ crit, err, warn          │
       │                │                          │ [default], notice, info, │
       │                │                          │ debug, audit             │
       ├────────────────┼──────────────────────────┼──────────────────────────┤
       │                │                          │                          │
       │group           │ NFLOG group to send      │ unsigned integer (16     │
       │                │ messages to              │ bit)                     │
       ├────────────────┼──────────────────────────┼──────────────────────────┤
       │                │                          │                          │
       │snaplen         │ Length of packet payload │ unsigned integer (32     │
       │                │ to include in netlink    │ bit)                     │
       │                │ message                  │                          │
       ├────────────────┼──────────────────────────┼──────────────────────────┤
       │                │                          │                          │
       │queue-threshold │ Number of packets to     │ unsigned integer (32     │
       │                │ queue inside the kernel  │ bit)                     │
       │                │ before sending them to   │                          │
       │                │ userspace                │                          │
       └────────────────┴──────────────────────────┴──────────────────────────┘

       Table 60. log-flags
       ┌─────────────┬─────────────────────────────────┐
       │FlagDescription                     │
       ├─────────────┼─────────────────────────────────┤
       │             │                                 │
       │tcp sequence │ Log TCP sequence numbers.       │
       ├─────────────┼─────────────────────────────────┤
       │             │                                 │
       │tcp options  │ Log options from the TCP packet │
       │             │ header.                         │
       ├─────────────┼─────────────────────────────────┤
       │             │                                 │
       │ip options   │ Log options from the IP/IPv6    │
       │             │ packet header.                  │
       ├─────────────┼─────────────────────────────────┤
       │             │                                 │
       │skuid        │ Log the userid of the process   │
       │             │ which generated the packet.     │
       ├─────────────┼─────────────────────────────────┤
       │             │                                 │
       │ether        │ Decode MAC addresses and        │
       │             │ protocol.                       │
       ├─────────────┼─────────────────────────────────┤
       │             │                                 │
       │all          │ Enable all log flags listed     │
       │             │ above.                          │
       └─────────────┴─────────────────────────────────┘

       Using log statement.

           # log the UID which generated the packet and ip options
           ip filter output log flags skuid flags ip options

           # log the tcp sequence numbers and tcp options from the TCP packet
           ip filter output log flags tcp sequence,options

           # enable all supported log flags
           ip6 filter output log flags all

   REJECT STATEMENT
           reject [ with REJECT_WITH ]

           REJECT_WITH := icmp icmp_code |
                            icmpv6 icmpv6_code |
                            icmpx icmpx_code |
                            tcp reset

       A reject statement is used to send back an error packet in response to the matched packet
       otherwise it is equivalent to drop so it is a terminating statement, ending rule
       traversal. This statement is only valid in base chains using the input, forward or output
       hooks, and user-defined chains which are only called from those chains.

       Table 61. different ICMP reject variants are meant for use in different table families
       ┌────────┬────────┬─────────────┐
       │VariantFamilyType        │
       ├────────┼────────┼─────────────┤
       │        │        │             │
       │icmp    │ ip     │ icmp_code   │
       ├────────┼────────┼─────────────┤
       │        │        │             │
       │icmpv6  │ ip6    │ icmpv6_code │
       ├────────┼────────┼─────────────┤
       │        │        │             │
       │icmpx   │ inet   │ icmpx_code  │
       └────────┴────────┴─────────────┘

       For a description of the different types and a list of supported keywords refer to DATA
       TYPES section above. The common default reject value is port-unreachable.

       Note that in bridge family, reject statement is only allowed in base chains which hook
       into input or prerouting.

   COUNTER STATEMENT
       A counter statement sets the hit count of packets along with the number of bytes.

           counter packets number bytes number
           counter { packets number | bytes number }

   CONNTRACK STATEMENT
       The conntrack statement can be used to set the conntrack mark and conntrack labels.

           ct {mark | event | label | zone} set value

       The ct statement sets meta data associated with a connection. The zone id has to be
       assigned before a conntrack lookup takes place, i.e. this has to be done in prerouting and
       possibly output (if locally generated packets need to be placed in a distinct zone), with
       a hook priority of raw (-300).

       Unlike iptables, where the helper assignment happens in the raw table, the helper needs to
       be assigned after a conntrack entry has been found, i.e. it will not work when used with
       hook priorities equal or before -200.

       Table 62. Conntrack statement types
       ┌────────┬──────────────────────────┬──────────────────────┐
       │KeywordDescriptionValue                │
       ├────────┼──────────────────────────┼──────────────────────┤
       │        │                          │                      │
       │event   │ conntrack event bits     │ bitmask, integer (32 │
       │        │                          │ bit)                 │
       ├────────┼──────────────────────────┼──────────────────────┤
       │        │                          │                      │
       │helper  │ name of ct helper object │ quoted string        │
       │        │ to assign to the         │                      │
       │        │ connection               │                      │
       ├────────┼──────────────────────────┼──────────────────────┤
       │        │                          │                      │
       │mark    │ Connection tracking mark │ mark                 │
       ├────────┼──────────────────────────┼──────────────────────┤
       │        │                          │                      │
       │label   │ Connection tracking      │ label                │
       │        │ label                    │                      │
       ├────────┼──────────────────────────┼──────────────────────┤
       │        │                          │                      │
       │zone    │ conntrack zone           │ integer (16 bit)     │
       └────────┴──────────────────────────┴──────────────────────┘

       save packet nfmark in conntrack.

           ct mark set meta mark

       set zone mapped via interface.

           table inet raw {
             chain prerouting {
                 type filter hook prerouting priority raw;
                 ct zone set iif map { "eth1" : 1, "veth1" : 2 }
             }
             chain output {
                 type filter hook output priority raw;
                 ct zone set oif map { "eth1" : 1, "veth1" : 2 }
             }
           }

       restrict events reported by ctnetlink.

           ct event set new,related,destroy

   NOTRACK STATEMENT
       The notrack statement allows one to disable connection tracking for certain packets.

           notrack

       Note that for this statement to be effective, it has to be applied to packets before a
       conntrack lookup happens. Therefore, it needs to sit in a chain with either prerouting or
       output hook and a hook priority of -300 (raw) or less.

       See SYNPROXY STATEMENT for an example usage.

   META STATEMENT
       A meta statement sets the value of a meta expression. The existing meta fields are:
       priority, mark, pkttype, nftrace.

           meta {mark | priority | pkttype | nftrace} set value

       A meta statement sets meta data associated with a packet.

       Table 63. Meta statement types
       ┌─────────┬────────────────────────┬───────────┐
       │KeywordDescriptionValue     │
       ├─────────┼────────────────────────┼───────────┤
       │         │                        │           │
       │priority │ TC packet priority     │ tc_handle │
       ├─────────┼────────────────────────┼───────────┤
       │         │                        │           │
       │mark     │ Packet mark            │ mark      │
       ├─────────┼────────────────────────┼───────────┤
       │         │                        │           │
       │pkttype  │ packet type            │ pkt_type  │
       ├─────────┼────────────────────────┼───────────┤
       │         │                        │           │
       │nftrace  │ ruleset packet tracing │ 0, 1      │
       │         │ on/off. Use monitor    │           │
       │         │ trace command to watch │           │
       │         │ traces                 │           │
       └─────────┴────────────────────────┴───────────┘

   LIMIT STATEMENT
           limit rate [over] packet_number / TIME_UNIT [burst packet_number packets]
           limit rate [over] byte_number BYTE_UNIT / TIME_UNIT [burst byte_number BYTE_UNIT]

           TIME_UNIT := second | minute | hour | day
           BYTE_UNIT := bytes | kbytes | mbytes

       A limit statement matches at a limited rate using a token bucket filter. A rule using this
       statement will match until this limit is reached. It can be used in combination with the
       log statement to give limited logging. The optional over keyword makes it match over the
       specified rate.

       The burst value influences the bucket size, i.e. jitter tolerance. With packet-based
       limit, the bucket holds exactly burst packets, by default five. If you specify packet
       burst, it must be a non-zero value. With byte-based limit, the bucket’s minimum size is
       the given rate’s byte value and the burst value adds to that, by default zero bytes.

       Table 64. limit statement values
       ┌──────────────┬───────────────────┬──────────────────────┐
       │ValueDescriptionType                 │
       ├──────────────┼───────────────────┼──────────────────────┤
       │              │                   │                      │
       │packet_number │ Number of packets │ unsigned integer (32 │
       │              │                   │ bit)                 │
       ├──────────────┼───────────────────┼──────────────────────┤
       │              │                   │                      │
       │byte_number   │ Number of bytes   │ unsigned integer (32 │
       │              │                   │ bit)                 │
       └──────────────┴───────────────────┴──────────────────────┘

   NAT STATEMENTS
           snat [[ip | ip6] to] ADDR_SPEC [:PORT_SPEC] [FLAGS]
           dnat [[ip | ip6] to] ADDR_SPEC [:PORT_SPEC] [FLAGS]
           masquerade [to :PORT_SPEC] [FLAGS]
           redirect [to :PORT_SPEC] [FLAGS]

           ADDR_SPEC := address | address - address
           PORT_SPEC := port | port - port

           FLAGS  := FLAG [, FLAGS]
           FLAG  := persistent | random | fully-random

       The nat statements are only valid from nat chain types.

       The snat and masquerade statements specify that the source address of the packet should be
       modified. While snat is only valid in the postrouting and input chains, masquerade makes
       sense only in postrouting. The dnat and redirect statements are only valid in the
       prerouting and output chains, they specify that the destination address of the packet
       should be modified. You can use non-base chains which are called from base chains of nat
       chain type too. All future packets in this connection will also be mangled, and rules
       should cease being examined.

       The masquerade statement is a special form of snat which always uses the outgoing
       interface’s IP address to translate to. It is particularly useful on gateways with dynamic
       (public) IP addresses.

       The redirect statement is a special form of dnat which always translates the destination
       address to the local host’s one. It comes in handy if one only wants to alter the
       destination port of incoming traffic on different interfaces.

       When used in the inet family (available with kernel 5.2), the dnat and snat statements
       require the use of the ip and ip6 keyword in case an address is provided, see the examples
       below.

       Before kernel 4.18 nat statements require both prerouting and postrouting base chains to
       be present since otherwise packets on the return path won’t be seen by netfilter and
       therefore no reverse translation will take place.

       Table 65. NAT statement values
       ┌───────────┬──────────────────────────┬─────────────────────────┐
       │ExpressionDescriptionType                    │
       ├───────────┼──────────────────────────┼─────────────────────────┤
       │           │                          │                         │
       │address    │ Specifies that the       │ ipv4_addr, ipv6_addr,   │
       │           │ source/destination       │ e.g. abcd::1234, or you │
       │           │ address of the packet    │ can use a mapping, e.g. │
       │           │ should be modified. You  │ meta mark map { 10 :    │
       │           │ may specify a mapping to │ 192.168.1.2, 20 :       │
       │           │ relate a list of tuples  │ 192.168.1.3 }           │
       │           │ composed of arbitrary    │                         │
       │           │ expression key with      │                         │
       │           │ address value.           │                         │
       ├───────────┼──────────────────────────┼─────────────────────────┤
       │           │                          │                         │
       │port       │ Specifies that the       │ port number (16 bit)    │
       │           │ source/destination       │                         │
       │           │ address of the packet    │                         │
       │           │ should be modified.      │                         │
       └───────────┴──────────────────────────┴─────────────────────────┘

       Table 66. NAT statement flags
       ┌─────────────┬──────────────────────────────────┐
       │FlagDescription                      │
       ├─────────────┼──────────────────────────────────┤
       │             │                                  │
       │persistent   │ Gives a client the same          │
       │             │ source-/destination-address for  │
       │             │ each connection.                 │
       ├─────────────┼──────────────────────────────────┤
       │             │                                  │
       │random       │ In kernel 5.0 and newer this is  │
       │             │ the same as fully-random. In     │
       │             │ earlier kernels the port mapping │
       │             │ will be randomized using a       │
       │             │ seeded MD5 hash mix using source │
       │             │ and destination address and      │
       │             │ destination port.                │
       ├─────────────┼──────────────────────────────────┤
       │             │                                  │
       │fully-random │ If used then port mapping is     │
       │             │ generated based on a 32-bit      │
       │             │ pseudo-random algorithm.         │
       └─────────────┴──────────────────────────────────┘

       Using NAT statements.

           # create a suitable table/chain setup for all further examples
           add table nat
           add chain nat prerouting { type nat hook prerouting priority dstnat; }
           add chain nat postrouting { type nat hook postrouting priority srcnat; }

           # translate source addresses of all packets leaving via eth0 to address 1.2.3.4
           add rule nat postrouting oif eth0 snat to 1.2.3.4

           # redirect all traffic entering via eth0 to destination address 192.168.1.120
           add rule nat prerouting iif eth0 dnat to 192.168.1.120

           # translate source addresses of all packets leaving via eth0 to whatever
           # locally generated packets would use as source to reach the same destination
           add rule nat postrouting oif eth0 masquerade

           # redirect incoming TCP traffic for port 22 to port 2222
           add rule nat prerouting tcp dport 22 redirect to :2222

           # inet family:
           # handle ip dnat:
           add rule inet nat prerouting dnat ip to 10.0.2.99
           # handle ip6 dnat:
           add rule inet nat prerouting dnat ip6 to fe80::dead
           # this masquerades both ipv4 and ipv6:
           add rule inet nat postrouting meta oif ppp0 masquerade

   TPROXY STATEMENT
       Tproxy redirects the packet to a local socket without changing the packet header in any
       way. If any of the arguments is missing the data of the incoming packet is used as
       parameter. Tproxy matching requires another rule that ensures the presence of transport
       protocol header is specified.

           tproxy to address:port
           tproxy to {address | :port}

       This syntax can be used in ip/ip6 tables where network layer protocol is obvious. Either
       IP address or port can be specified, but at least one of them is necessary.

           tproxy {ip | ip6} to address[:port]
           tproxy to :port

       This syntax can be used in inet tables. The ip/ip6 parameter defines the family the rule
       will match. The address parameter must be of this family. When only port is defined, the
       address family should not be specified. In this case the rule will match for both
       families.

       Table 67. tproxy attributes
       ┌────────┬─────────────────────────────────┐
       │NameDescription                     │
       ├────────┼─────────────────────────────────┤
       │        │                                 │
       │address │ IP address the listening socket │
       │        │ with IP_TRANSPARENT option is   │
       │        │ bound to.                       │
       ├────────┼─────────────────────────────────┤
       │        │                                 │
       │port    │ Port the listening socket with  │
       │        │ IP_TRANSPARENT option is bound  │
       │        │ to.                             │
       └────────┴─────────────────────────────────┘

       Example ruleset for tproxy statement.

           table ip x {
               chain y {
                   type filter hook prerouting priority mangle; policy accept;
                   tcp dport ntp tproxy to 1.1.1.1
                   udp dport ssh tproxy to :2222
               }
           }
           table ip6 x {
               chain y {
                  type filter hook prerouting priority mangle; policy accept;
                  tcp dport ntp tproxy to [dead::beef]
                  udp dport ssh tproxy to :2222
               }
           }
           table inet x {
               chain y {
                   type filter hook prerouting priority mangle; policy accept;
                   tcp dport 321 tproxy to :ssh
                   tcp dport 99 tproxy ip to 1.1.1.1:999
                   udp dport 155 tproxy ip6 to [dead::beef]:smux
               }
           }

   SYNPROXY STATEMENT
       This statement will process TCP three-way-handshake parallel in netfilter context to
       protect either local or backend system. This statement requires connection tracking
       because sequence numbers need to be translated.

           synproxy [mss mss_value] [wscale wscale_value] [SYNPROXY_FLAGS]

       Table 68. synproxy statement attributes
       ┌───────┬─────────────────────────────────┐
       │NameDescription                     │
       ├───────┼─────────────────────────────────┤
       │       │                                 │
       │mss    │ Maximum segment size announced  │
       │       │ to clients. This must match the │
       │       │ backend.                        │
       ├───────┼─────────────────────────────────┤
       │       │                                 │
       │wscale │ Window scale announced to       │
       │       │ clients. This must match the    │
       │       │ backend.                        │
       └───────┴─────────────────────────────────┘

       Table 69. synproxy statement flags
       ┌──────────┬──────────────────────────────────┐
       │FlagDescription                      │
       ├──────────┼──────────────────────────────────┤
       │          │                                  │
       │sack-perm │ Pass client selective            │
       │          │ acknowledgement option to        │
       │          │ backend (will be disabled if not │
       │          │ present).                        │
       ├──────────┼──────────────────────────────────┤
       │          │                                  │
       │timestamp │ Pass client timestamp option to  │
       │          │ backend (will be disabled if not │
       │          │ present, also needed for         │
       │          │ selective acknowledgement and    │
       │          │ window scaling).                 │
       └──────────┴──────────────────────────────────┘

       Example ruleset for synproxy statement.

           Determine tcp options used by backend, from an external system

                         tcpdump -pni eth0 -c 1 'tcp[tcpflags] == (tcp-syn|tcp-ack)'
                             port 80 &
                         telnet 192.0.2.42 80
                         18:57:24.693307 IP 192.0.2.42.80 > 192.0.2.43.48757:
                             Flags [S.], seq 360414582, ack 788841994, win 14480,
                             options [mss 1460,sackOK,
                             TS val 1409056151 ecr 9690221,
                             nop,wscale 9],
                             length 0

           Switch tcp_loose mode off, so conntrack will mark out-of-flow packets as state INVALID.

                         echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose

           Make SYN packets untracked.

                   table ip x {
                           chain y {
                                   type filter hook prerouting priority raw; policy accept;
                                   tcp flags syn notrack
                           }
                   }

           Catch UNTRACKED (SYN  packets) and INVALID (3WHS ACK packets) states and send
           them to SYNPROXY. This rule will respond to SYN packets with SYN+ACK
           syncookies, create ESTABLISHED for valid client response (3WHS ACK packets) and
           drop incorrect cookies. Flags combinations not expected during  3WHS will not
           match and continue (e.g. SYN+FIN, SYN+ACK). Finally, drop invalid packets, this
           will be out-of-flow packets that were not matched by SYNPROXY.

               table ip x {
                       chain z {
                               type filter hook input priority filter; policy accept;
                               ct state invalid, untracked synproxy mss 1460 wscale 9 timestamp sack-perm
                               ct state invalid drop
                       }
               }

   FLOW STATEMENT
       A flow statement allows us to select what flows you want to accelerate forwarding through
       layer 3 network stack bypass. You have to specify the flowtable name where you want to
       offload this flow.

       flow add @flowtable

   QUEUE STATEMENT
       This statement passes the packet to userspace using the nfnetlink_queue handler. The
       packet is put into the queue identified by its 16-bit queue number. Userspace can inspect
       and modify the packet if desired. Userspace must then drop or re-inject the packet into
       the kernel. See libnetfilter_queue documentation for details.

           queue [flags QUEUE_FLAGS] [to queue_number]
           queue [flags QUEUE_FLAGS] [to queue_number_from - queue_number_to]
           queue [flags QUEUE_FLAGS] [to QUEUE_EXPRESSION ]

           QUEUE_FLAGS := QUEUE_FLAG [, QUEUE_FLAGS]
           QUEUE_FLAG  := bypass | fanout
           QUEUE_EXPRESSION := numgen | hash | symhash | MAP STATEMENT

       QUEUE_EXPRESSION can be used to compute a queue number at run-time with the hash or numgen
       expressions. It also allows one to use the map statement to assign fixed queue numbers
       based on external inputs such as the source ip address or interface names.

       Table 70. queue statement values
       ┌──────────────────┬─────────────────────────┬──────────────────────┐
       │ValueDescriptionType                 │
       ├──────────────────┼─────────────────────────┼──────────────────────┤
       │                  │                         │                      │
       │queue_number      │ Sets queue number,      │ unsigned integer (16 │
       │                  │ default is 0.           │ bit)                 │
       ├──────────────────┼─────────────────────────┼──────────────────────┤
       │                  │                         │                      │
       │queue_number_from │ Sets initial queue in   │ unsigned integer (16 │
       │                  │ the range, if fanout is │ bit)                 │
       │                  │ used.                   │                      │
       ├──────────────────┼─────────────────────────┼──────────────────────┤
       │                  │                         │                      │
       │queue_number_to   │ Sets closing queue in   │ unsigned integer (16 │
       │                  │ the range, if fanout is │ bit)                 │
       │                  │ used.                   │                      │
       └──────────────────┴─────────────────────────┴──────────────────────┘

       Table 71. queue statement flags
       ┌───────┬───────────────────────────────┐
       │FlagDescription                   │
       ├───────┼───────────────────────────────┤
       │       │                               │
       │bypass │ Let packets go through if     │
       │       │ userspace application cannot  │
       │       │ back off. Before using this   │
       │       │ flag, read libnetfilter_queue │
       │       │ documentation for performance │
       │       │ tuning recommendations.       │
       ├───────┼───────────────────────────────┤
       │       │                               │
       │fanout │ Distribute packets between    │
       │       │ several queues.               │
       └───────┴───────────────────────────────┘

   DUP STATEMENT
       The dup statement is used to duplicate a packet and send the copy to a different
       destination.

           dup to device
           dup to address device device

       Table 72. Dup statement values
       ┌───────────┬─────────────────────────┬──────────────────────────┐
       │ExpressionDescriptionType                     │
       ├───────────┼─────────────────────────┼──────────────────────────┤
       │           │                         │                          │
       │address    │ Specifies that the copy │ ipv4_addr, ipv6_addr,    │
       │           │ of the packet should be │ e.g. abcd::1234, or you  │
       │           │ sent to a new gateway.  │ can use a mapping, e.g.  │
       │           │                         │ ip saddr map {           │
       │           │                         │ 192.168.1.2 : 10.1.1.1 } │
       ├───────────┼─────────────────────────┼──────────────────────────┤
       │           │                         │                          │
       │device     │ Specifies that the copy │ string                   │
       │           │ should be transmitted   │                          │
       │           │ via device.             │                          │
       └───────────┴─────────────────────────┴──────────────────────────┘

       Using the dup statement.

           # send to machine with ip address 10.2.3.4 on eth0
           ip filter forward dup to 10.2.3.4 device "eth0"

           # copy raw frame to another interface
           netdev ingress dup to "eth0"
           dup to "eth0"

           # combine with map dst addr to gateways
           dup to ip daddr map { 192.168.7.1 : "eth0", 192.168.7.2 : "eth1" }

   FWD STATEMENT
       The fwd statement is used to redirect a raw packet to another interface. It is only
       available in the netdev family ingress and egress hooks. It is similar to the dup
       statement except that no copy is made.

       You can also specify the address of the next hop and the device to forward the packet to.
       This updates the source and destination MAC address of the packet by transmitting it
       through the neighboring layer. This also decrements the ttl field of the IP packet. This
       provides a way to effectively bypass the classical forwarding path, thus skipping the fib
       (forwarding information base) lookup.

           fwd to device
           fwd [ip | ip6] to address device device

       Using the fwd statement.

           # redirect raw packet to device
           netdev ingress fwd to "eth0"

           # forward packet to next hop 192.168.200.1 via eth0 device
           netdev ingress ether saddr set fwd ip to 192.168.200.1 device "eth0"

   SET STATEMENT
       The set statement is used to dynamically add or update elements in a set from the packet
       path. The set setname must already exist in the given table and must have been created
       with one or both of the dynamic and the timeout flags. The dynamic flag is required if the
       set statement expression includes a stateful object. The timeout flag is implied if the
       set is created with a timeout, and is required if the set statement updates elements,
       rather than adding them. Furthermore, these sets should specify both a maximum set size
       (to prevent memory exhaustion), and their elements should have a timeout (so their number
       will not grow indefinitely) either from the set definition or from the statement that adds
       or updates them. The set statement can be used to e.g. create dynamic blacklists.

       Dynamic updates are also supported with maps. In this case, the add or update rule needs
       to provide both the key and the data element (value), separated via :.

           {add | update} @setname { expression [timeout timeout] [comment string] }

       Example for simple blacklist.

           # declare a set, bound to table "filter", in family "ip".
           # Timeout and size are mandatory because we will add elements from packet path.
           # Entries will timeout after one minute, after which they might be
           # re-added if limit condition persists.
           nft add set ip filter blackhole \
               "{ type ipv4_addr; flags dynamic; timeout 1m; size 65536; }"

           # declare a set to store the limit per saddr.
           # This must be separate from blackhole since the timeout is different
           nft add set ip filter flood \
               "{ type ipv4_addr; flags dynamic; timeout 10s; size 128000; }"

           # whitelist internal interface.
           nft add rule ip filter input meta iifname "internal" accept

           # drop packets coming from blacklisted ip addresses.
           nft add rule ip filter input ip saddr @blackhole counter drop

           # add source ip addresses to the blacklist if more than 10 tcp connection
           # requests occurred per second and ip address.
           nft add rule ip filter input tcp flags syn tcp dport ssh \
               add @flood { ip saddr limit rate over 10/second } \
               add @blackhole { ip saddr } \
               drop

           # inspect state of the sets.
           nft list set ip filter flood
           nft list set ip filter blackhole

           # manually add two addresses to the blackhole.
           nft add element filter blackhole { 10.2.3.4, 10.23.1.42 }

   MAP STATEMENT
       The map statement is used to lookup data based on some specific input key.

           expression map { MAP_ELEMENTS }

           MAP_ELEMENTS := MAP_ELEMENT [, MAP_ELEMENTS]
           MAP_ELEMENT  := key : value

       The key is a value returned by expression.

       Using the map statement.

           # select DNAT target based on TCP dport:
           # connections to port 80 are redirected to 192.168.1.100,
           # connections to port 8888 are redirected to 192.168.1.101
           nft add rule ip nat prerouting dnat tcp dport map { 80 : 192.168.1.100, 8888 : 192.168.1.101 }

           # source address based SNAT:
           # packets from net 192.168.1.0/24 will appear as originating from 10.0.0.1,
           # packets from net 192.168.2.0/24 will appear as originating from 10.0.0.2
           nft add rule ip nat postrouting snat to ip saddr map { 192.168.1.0/24 : 10.0.0.1, 192.168.2.0/24 : 10.0.0.2 }

   VMAP STATEMENT
       The verdict map (vmap) statement works analogous to the map statement, but contains
       verdicts as values.

           expression vmap { VMAP_ELEMENTS }

           VMAP_ELEMENTS := VMAP_ELEMENT [, VMAP_ELEMENTS]
           VMAP_ELEMENT  := key : verdict

       Using the vmap statement.

           # jump to different chains depending on layer 4 protocol type:
           nft add rule ip filter input ip protocol vmap { tcp : jump tcp-chain, udp : jump udp-chain , icmp : jump icmp-chain }

   XT STATEMENT
       This represents an xt statement from xtables compat interface. It is a fallback if
       translation is not available or not complete.

           xt TYPE NAME

           TYPE := match | target | watcher

       Seeing this means the ruleset (or parts of it) were created by iptables-nft and one should
       use that to manage it.

       BEWARE: nftables won’t restore these statements.

ADDITIONAL COMMANDS

       These are some additional commands included in nft.

   MONITOR
       The monitor command allows you to listen to Netlink events produced by the nf_tables
       subsystem. These are either related to creation and deletion of objects or to packets for
       which meta nftrace was enabled. When they occur, nft will print to stdout the monitored
       events in either JSON or native nft format.

           monitor [new | destroy] MONITOR_OBJECT
           monitor trace

           MONITOR_OBJECT := tables | chains | sets | rules | elements | ruleset

       To filter events related to a concrete object, use one of the keywords in MONITOR_OBJECT.

       To filter events related to a concrete action, use keyword new or destroy.

       The second form of invocation takes no further options and exclusively prints events
       generated for packets with nftrace enabled.

       Hit ^C to finish the monitor operation.

       Listen to all events, report in native nft format.

           % nft monitor

       Listen to deleted rules, report in JSON format.

           % nft -j monitor destroy rules

       Listen to both new and destroyed chains, in native nft format.

           % nft monitor chains

       Listen to ruleset events such as table, chain, rule, set, counters and quotas, in native
       nft format.

           % nft monitor ruleset

       Trace incoming packets from host 10.0.0.1.

           % nft add rule filter input ip saddr 10.0.0.1 meta nftrace set 1
           % nft monitor trace

ERROR REPORTING

       When an error is detected, nft shows the line(s) containing the error, the position of the
       erroneous parts in the input stream and marks up the erroneous parts using carets (^). If
       the error results from the combination of two expressions or statements, the part imposing
       the constraints which are violated is marked using tildes (~).

       For errors returned by the kernel, nft cannot detect which parts of the input caused the
       error and the entire command is marked.

       Error caused by single incorrect expression.

           <cmdline>:1:19-22: Error: Interface does not exist
           filter output oif eth0
                             ^^^^

       Error caused by invalid combination of two expressions.

           <cmdline>:1:28-36: Error: Right hand side of relational expression (==) must be constant
           filter output tcp dport == tcp dport
                                   ~~ ^^^^^^^^^

       Error returned by the kernel.

           <cmdline>:0:0-23: Error: Could not process rule: Operation not permitted
           filter output oif wlan0
           ^^^^^^^^^^^^^^^^^^^^^^^

EXIT STATUS

       On success, nft exits with a status of 0. Unspecified errors cause it to exit with a
       status of 1, memory allocation errors with a status of 2, unable to open Netlink socket
       with 3.

SEE ALSO

           libnftables(3), libnftables-json(5), iptables(8), ip6tables(8), arptables(8), ebtables(8), ip(8), tc(8)

       There is an official wiki at: https://wiki.nftables.org

AUTHORS

       nftables was written by Patrick McHardy and Pablo Neira Ayuso, among many other
       contributors from the Netfilter community.

COPYRIGHT

       Copyright © 2008-2014 Patrick McHardy <kaber@trash.net> Copyright © 2013-2018 Pablo Neira
       Ayuso <pablo@netfilter.org>

       nftables is free software; you can redistribute it and/or modify it under the terms of the
       GNU General Public License version 2 as published by the Free Software Foundation.

       This documentation is licensed under the terms of the Creative Commons
       Attribution-ShareAlike 4.0 license, CC BY-SA 4.0
       http://creativecommons.org/licenses/by-sa/4.0/.

                                            01/29/2023                                     NFT(8)