Provided by: ceph-common_17.2.5-0ubuntu2_amd64 bug

NAME

       rados - rados object storage utility

SYNOPSIS

       rados [ options ] [ command ]

DESCRIPTION

       rados is a utility for interacting with a Ceph object storage cluster (RADOS), part of the
       Ceph distributed storage system.

GLOBAL OPTIONS

       --object-locator object_locator
              Set object_locator for operation.

       -p pool, --pool pool
              Interact with the given pool. Required by most commands.

       --target-pool pool
              Select target pool by name.

       --pgid As an alternative to --pool, --pgid also allow users to specify the PG id to  which
              the  command  will  be  directed.  With this option, certain commands like ls allow
              users to limit the scope of the command to the given PG.

       -N namespace, --namespace namespace
              Specify the rados namespace to use for the object.

       --all  Use with ls to list objects  in  all  namespaces.   Put  in  CEPH_ARGS  environment
              variable to make this the default.

       --default
              Use  with  ls to list objects in default namespace.  Takes precedence over --all in
              case --all is in environment.

       -s snap, --snap snap
              Read from the given pool snapshot. Valid for all pool-specific read operations.

       --create
              Create the pool or directory that was specified.

       -i infile
              will specify an input file to be passed along as a payload with the command to  the
              monitor cluster. This is only used for specific monitor commands.

       -m monaddress[:port]
              Connect to specified monitor (instead of looking through ceph.conf).

       -b block_size
              Set the block size for put/get/append ops and for write benchmarking.

       --striper
              Uses  the  striping  API of rados rather than the default one.  Available for stat,
              stat2, get, put, append, truncate, rm, ls and all xattr related operation.

       -O object_size, --object-size object_size
              Set the object size for put/get ops and for write benchmarking.

       --max-objects
              Set the max number of objects for write benchmarking.

       --lock-cookie locker-cookie
              Will set the lock cookie for acquiring advisory lock (lock get  command).   If  the
              cookie  is  not empty, this option must be passed to lock break command to find the
              correct lock when releasing lock.

       --target-locator
              Use with cp to specify the locator of the new object.

       --target-nspace
              Use with cp to specify the namespace of the new object.

BENCH OPTIONS

       -t N, --concurrent-ios=N
              Set number of concurrent I/O operations.

       --show-time
              Prefix output with date/time.

       --no-verify
              Do not verify contents of read objects.

       --write-object
              Write contents to the objects.

       --write-omap
              Write contents to the omap.

       --write-xattr
              Write contents to the extended attributes.

LOAD GEN OPTIONS

       --num-objects
              Total number of objects.

       --min-object-size
              Min object size.

       --max-object-size
              Max object size.

       --min-op-len
              Min io size of operations.

       --max-op-len
              Max io size of operations.

       --max-ops
              Max number of operations.

       --max-backlog
              Max backlog size.

       --read-percent
              Percent of operations that are read.

       --target-throughput
              Target throughput (in bytes).

       --run-length
              Total time (in seconds).

       --offset-align
              At what boundary to align random op offsets.

CACHE POOLS OPTIONS

       --with-clones
              Include clones when doing flush or evict.

OMAP OPTIONS

       --omap-key-file file
              Read the omap key from a file.

GENERIC OPTIONS

       -c FILE, --conf FILE
              Read configuration from the given configuration file.

       --id ID
              Set ID portion of my name.

       -n TYPE.ID, --name TYPE.ID
              Set cephx user name.

       --cluster NAME
              Set cluster name (default: ceph).

       --setuser USER
              Set uid to user or uid (and gid to user's gid).

       --setgroup GROUP
              Set gid to group or gid.

       --version
              Show version and quit.

GLOBAL COMMANDS

       lspools
              List object pools

       df     Show utilization statistics, including disk usage (bytes) and object  counts,  over
              the entire system and broken down by pool.

       list-inconsistent-pg pool
              List inconsistent PGs in given pool.

       list-inconsistent-obj pgid
              List inconsistent objects in given PG.

       list-inconsistent-snapset pgid
              List inconsistent snapsets in given PG.

POOL SPECIFIC COMMANDS

       get name outfile
              Read object name from the cluster and write it to outfile.

       put name infile [--offset offset]
              Write  object  name with start offset (default:0) to the cluster with contents from
              infile.  Warning: The put command creates a single  RADOS  object,  sized  just  as
              large  as  your  input  file.  Unless your objects are of reasonable and consistent
              sizes, that is probably not what you want -- consider using RGW/S3, CephFS, or  RBD
              instead.

       append name infile
              Append object name to the cluster with contents from infile.

       rm [--force-full] name ...
              Remove object(s) with name(s). With --force-full will remove when cluster is marked
              full.

       listwatchers name
              List the watchers of object name.

       ls outfile
              List objects in the given pool and write to outfile. Instead of  --pool  if  --pgid
              will be specified, ls will only list the objects in the given PG.

       lssnap List snapshots for given pool.

       clonedata srcname dstname --object-locator key
              Clone  object  byte data from srcname to dstname.  Both objects must be stored with
              the locator key key (usually either srcname or  dstname).   Object  attributes  and
              omap keys are not copied or cloned.

       mksnap foo
              Create pool snapshot named foo.

       rmsnap foo
              Remove pool snapshot named foo.

       bench seconds mode [ -b objsize ] [ -t threads ]
              Benchmark  for  seconds. The mode can be write, seq, or rand. seq and rand are read
              benchmarks, either  sequential  or  random.  Before  running  one  of  the  reading
              benchmarks,  run a write benchmark with the --no-cleanup option. The default object
              size is 4 MB, and the default number of simulated threads (parallel writes) is  16.
              The  --run-name  <label>  option  is  useful  for benchmarking a workload test from
              multiple  clients.   The   <label>   is   an   arbitrary   object   name.   It   is
              "benchmark_last_metadata" by default, and is used as the underlying object name for
              "read" and "write" ops.  Note: -b objsize option  is  valid  only  in  write  mode.
              Note:  write  and seq must be run on the same host otherwise the objects created by
              write will have names that will fail seq.

       cleanup [ --run-name run_name ] [ --prefix prefix ]
              Clean  up  a  previous  benchmark  operation.   Note:  the  default   run-name   is
              "benchmark_last_metadata"

       listxattr name
              List all extended attributes of an object.

       getxattr name attr
              Dump the extended attribute value of attr of an object.

       setxattr name attr value
              Set the value of attr in the extended attributes of an object.

       rmxattr name attr
              Remove attr from the extended attributes of an object.

       stat name
              Get stat (ie. mtime, size) of given object

       stat2 name
              Get stat (similar to stat, but with high precision time) of given object

       listomapkeys name
              List all the keys stored in the object map of object name.

       listomapvals name
              List  all  key/value pairs stored in the object map of object name.  The values are
              dumped in hexadecimal.

       getomapval [ --omap-key-file file ] name key [ out-file ]
              Dump the hexadecimal value of key in  the  object  map  of  object  name.   If  the
              optional  out-file  argument is not provided, the value will be written to standard
              output.

       setomapval [ --omap-key-file file ] name key [ value ]
              Set the value of key in the object map  of  object  name.  If  the  optional  value
              argument is not provided, the value will be read from standard input.

       rmomapkey [ --omap-key-file file ] name key
              Remove key from the object map of object name.

       getomapheader name
              Dump the hexadecimal value of the object map header of object name.

       setomapheader name value
              Set the value of the object map header of object name.

       export filename
              Serialize pool contents to a file or standard output.n"

       import [--dry-run] [--no-overwrite] < filename | - >
              Load pool contents from a file or standard input

EXAMPLES

       To view cluster utilization:

          rados df

       To get a list object in pool foo sent to stdout:

          rados -p foo ls -

       To get a list of objects in PG 0.6:

          rados --pgid 0.6 ls

       To write an object:

          rados -p foo put myobject blah.txt

       To create a snapshot:

          rados -p foo mksnap mysnap

       To delete the object:

          rados -p foo rm myobject

       To read a previously snapshotted version of an object:

          rados -p foo -s mysnap get myobject blah.txt.old

       To list inconsistent objects in PG 0.6:

          rados list-inconsistent-obj 0.6 --format=json-pretty

AVAILABILITY

       rados  is  part  of  Ceph,  a massively scalable, open-source, distributed storage system.
       Please refer to the Ceph documentation at https://docs.ceph.com for more information.

SEE ALSO

       ceph(8)

COPYRIGHT

       2010-2023, Inktank  Storage,  Inc.  and  contributors.  Licensed  under  Creative  Commons
       Attribution Share Alike 3.0 (CC-BY-SA-3.0)