NAME

       rhino - Driver for Brazilian Microsol RHINO UPS equipment

NOTE

       This man page only documents the hardware-specific features of the rhino driver. For
       information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This driver has been tested with:

       •   Rhino 6000 VA

       •   Rhino 7500 VA

       •   Rhino 10000 VA

       •   Rhino 20000 VA

       All Rhino models are sinusoidal on-line.

EXTRA ARGUMENTS

       This driver support the following extra optional settings in ups.conf(5):

       battext = n - (default = 0, no extra battery, where n = Ampere*hour )

COMMANDS

       •   load.on - Turn on the load immediately

       •   load.off - Turn off the load immediately

       •   bypass.start - Put the UPS in bypass mode

       •   bypass.stop - Put the UPS out of bypass mode

       •   shutdown.stayoff - Shut down in 3 minutes and do not return

AUTHOR

       Silvino B. Magalhães <sbm2yk@gmail.com>

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/