Provided by: rpm_4.18.0+dfsg-1build1_amd64 bug

NAME

       rpmbuild - Build RPM Package(s)

SYNOPSIS

   BUILDING PACKAGES:
       rpmbuild {-ba|-bb|-bp|-bf|-bc|-bi|-bl|-bs|-br|-bd} [rpmbuild-options] SPECFILE ...

       rpmbuild {-ra|-rb|-rp|-rf|-rc|-ri|-rl|-rs|-rr|-rd} [rpmbuild-options] SOURCEPACKAGE ...

       rpmbuild {-ta|-tb|-tp|-tf|-tc|-ti|-tl|-ts|-tr|-td} [rpmbuild-options] TARBALL ...

       rpmbuild {--rebuild|--recompile} SOURCEPKG ...

   MISCELLANEOUS:
       rpmbuild --showrc

   rpmbuild-options
       [--buildroot  DIRECTORY]  [--clean]  [--nobuild] [--rmsource] [--rmspec] [--short-circuit]
       [--build-in-place] [--noprep] [--noclean] [--nocheck] [--rpmfcdebug]  [--target  PLATFORM]
       [--with OPTION] [--without OPTION]

DESCRIPTION

       rpmbuild is used to build both binary and source software packages.  A package consists of
       an archive of files and meta-data used to install and erase the archive files.  The  meta-
       data  includes  helper  scripts,  file  attributes,  and descriptive information about the
       package.  Packages come in two varieties: binary packages, used to encapsulate software to
       be  installed,  and  source  packages,  containing the source code and recipe necessary to
       produce binary packages.

       One of the following basic modes must be  selected:  Build  Package,  Build  Package  from
       Tarball, Recompile Package, Show Configuration.

   GENERAL OPTIONS
       These options can be used in all the different modes.

       -?, --help
              Print a longer usage message then normal.

       --version
              Print a single line containing the version number of rpm being used.

       --quiet
              Print as little as possible - normally only error messages will be displayed.

       -v     Print verbose information - normally routine progress messages will be displayed.

       -vv    Print lots of ugly debugging information.

       --rpmfcdebug
              Enables to debug dependencies generation.

       --rcfile FILELIST
              Each  of  the files in the colon separated FILELIST is read sequentially by rpm for
              configuration information.  Only the first file in the list must exist, and  tildes
              will   be   expanded   to   the   value   of   $HOME.    The  default  FILELIST  is
              /usr/lib/rpm/rpmrc:/usr/lib/rpm/<vendor>/rpmrc:/etc/rpmrc:~/.rpmrc.

       --pipe CMD
              Pipes the output of rpm to the command CMD.

       --dbpath DIRECTORY
              Use the database in DIRECTORY rather than the default path /var/lib/rpm

       --root DIRECTORY
              Use the file system tree rooted at DIRECTORY for all operations.   Note  that  this
              means  the  database  within  DIRECTORY  will be used for dependency checks and any
              scriptlet(s) (e.g. %post if installing, or %prep if building, a  package)  will  be
              run after a chroot(2) to DIRECTORY.

       -D, --define='MACRO EXPR'
              Defines MACRO with value EXPR.

       --scm=SCM
              Select  the  SCM  to use with %autosetup, if one is not set in the spec file.  Note
              that not all values for SCM, e.g., patch (the default) and gendiff, git,  or  quilt
              work  interchangeably  with  all other patches and options stated in the %autosetup
              line, especially option -pN.

   BUILD OPTIONS
       The general form of an rpm build command is

       rpmbuild {-bSTAGE|-rSTAGE|-tSTAGE} [rpmbuild-options] FILE ...

       The argument used is -b if a spec file is being used to build the package, -r if a  source
       package  is to be rebuilt and -t if rpmbuild should look inside of a (possibly compressed)
       tar file for the spec file to use.

       Packages are built in a number of stages.  The  first  six  correspond  to  the  following
       sections  in  a  spec  file:  %prep, %generate_buildrequires, %build, %install, %check and
       %clean.  Finally, binary and source packages are created in an assembly stage.

       The STAGE character specifies the stage  to  finish  with  (after  doing  all  the  stages
       preceding it), and is one of:

       -ba    Perform  a  full  build - executes up to and including the assembly stage.  In most
              cases, this is the option to choose.

       -bb    Build just the binary packages - executes up to and including the  assembly  stage,
              but  without  creating  the  source  package.   On  success, the build directory is
              removed (as in --clean).

       -bp    Unpack the sources and apply any patches - executes the %prep stage only.

       -bf    Configure the sources - executes  up  to  and  including  the  %conf  stage.   This
              generally involves the equivalent of a "./configure".

       -bc    Compile  the  sources  -  executes  up  to  and  including  the %build stage.  This
              generally involves the equivalent of a "make".

       -bi    Install the binaries into the build root - executes up to and including the  %check
              stage.   This  generally  involves  the  equivalent  of  a "make install" and "make
              check".

       -bl    Do a "list check" - the %files section from the spec file is  macro  expanded,  and
              checks are made to verify that each file exists.

       -bs    Build  just  the  source  package  -  skips straight to the assembly stage, without
              executing any of the preceding stages or creating binary packages.

       -br    Build  just  the  source  package,  but  also  parse  and  include  dynamic   build
              dependencies  -  executes up to and including the %generate_buildrequires stage and
              then skips straight to the assembly stage, without creating binary packages.   This
              command  can  be used to fully resolve dynamic build dependencies.  See the DYNAMIC
              BUILD DEPENDENCIES section for details.

       -bd    Check dynamic build dependencies and build the .buildreqs.nosrc.rpm package if  any
              are missing.  Don’t build anything else.

       The following options may also be used:

       --buildroot DIRECTORY
              When building a package, override the BuildRoot tag with directory DIRECTORY.

       --clean
              Remove the build tree after the packages are made.

       --nobuild
              Do not execute any build stages.  Useful for testing out spec files.

       --noprep
              Do not execute %prep build stage even if present in spec.

       --noclean
              Do not execute %clean build stage even if present in spec.

       --nocheck
              Do not execute %check build stage even if present in spec.

       --nodebuginfo
              Do not generate debuginfo packages.

       --nodeps
              Do not verify build dependencies.

       --rmsource
              Remove  the  sources  after  the build (may also be used standalone, e.g. "rpmbuild
              --rmsource foo.spec").

       --rmspec
              Remove the spec file after the build (may also be used standalone,  eg.   "rpmbuild
              --rmspec foo.spec").

       --short-circuit
              Skip straight to specified stage (i.e., skip all stages leading up to the specified
              stage).  Only valid with -bc,  -bi,  and  -bb.   Useful  for  local  testing  only.
              Packages  built this way will be marked with an unsatisfiable dependency to prevent
              their accidental use.

       --build-in-place
              Build from  locally  checked  out  sources.   Sets  _builddir  to  current  working
              directory.   Skips  handling  of -n and untar in the %setup and the deletion of the
              buildSubdir.

       --target PLATFORM
              When building the package, interpret PLATFORM as arch-vendor-os and set the  macros
              %_target, %_target_cpu, and %_target_os accordingly.

       --with OPTION
              Enable configure OPTION for build.

       --without OPTION
              Disable configure OPTION for build.

   REBUILD AND RECOMPILE OPTIONS
       There are two other ways to invoke building with rpm:

       rpmbuild --rebuild|--recompile SOURCEPKG ...

       When  invoked  this  way,  rpmbuild  installs  the  named source package, and does a prep,
       compile and install.  In addition, --rebuild builds a new binary package.  When the  build
       has completed, the build directory is removed (as in --clean) and the the sources and spec
       file for the package are removed.

       These options are now superseded by the -r* options which allow  much  more  fine  control
       over what stages of the build to run.

   DYNAMIC BUILD DEPENDENCIES
       When  the %generate_buildrequires stage runs and some of the newly generated BuildRequires
       are  not  satisfied,  rpmbuild  creates  an  intermediate   source   package   ending   in
       buildreqs.nosrc.rpm,  which  has  the  new  BuildRequires,  and  exits with code 11.  This
       package can then be used in place of the original source package to  resolve  and  install
       the missing build dependencies in the usual way, such as with dnf-builddep(8).

       Multiple  layers  of  dynamic build dependencies may exist in a spec file; the presence of
       specific BuildRequires on the system may yield new BuildRequires  next  time  a  build  is
       performed  with the same source package.  The easiest way to ensure that all dynamic build
       dependencies are satisfied is to run the -br command, install the new dependencies of  the
       buildreqs.nosrc.rpm  package and repeat the whole procedure until rpmbuild no longer exits
       with code 11.

       If the -br command is coupled with --nodeps,  exit  code  11  is  always  returned  and  a
       buildreqs.nosrc.rpm package is always created.

   SHOWRC
       The command

       rpmbuild --showrc

       shows  the  values rpmbuild will use for all of the options are currently set in rpmrc and
       macros configuration file(s).

FILES

   rpmrc Configuration
              /usr/lib/rpm/rpmrc
              /usr/lib/rpm/<vendor>/rpmrc
              /etc/rpmrc
              ~/.rpmrc

   Macro Configuration
              /usr/lib/rpm/macros
              /usr/lib/rpm/<vendor>/macros
              /etc/rpm/macros
              ~/.rpmmacros

   Temporary
       /var/tmp/rpm*

SEE ALSO

              gendiff(1),
              popt(3),
              rpm(8),
              rpm2cpio(8),
              rpmkeys(8)
              rpmspec(8),
              rpmsign(8),

       rpmbuild --help - as rpm supports customizing the options via popt aliases it's impossible
       to guarantee that what's described in the manual matches what's available.

       http://www.rpm.org/ <URL:http://www.rpm.org/>

AUTHORS

              Marc Ewing <marc@redhat.com>
              Jeff Johnson <jbj@redhat.com>
              Erik Troan <ewt@redhat.com>

                                           09 June 2002                               RPMBUILD(8)