Provided by: sanlk-reset_3.8.5-1build1_amd64 bug

NAME

       sanlk-resetd - host reset daemon

SYNOPSIS

       sanlk-resetd [OPTIONS] lockspace_name ...

DESCRIPTION

       The sanlk-resetd daemon gets events from specified sanlock lockspaces.  Events are defined
       to cause sanlk-resetd to:
       - use wdmd/watchdog to reset the host
       - use /proc/sysrq-trigger to reboot the host

       The sanlk-reset program can be run on another host to request that sanlk-resetd reset  the
       host  it  is  running  on.   Both hosts must be operational and have continued access to a
       common lockspace for  the  reset  request  to  succeed.   After  setting  the  event,  the
       sanlk-reset  program  monitors  the  host status in the sanlock lockspace until the target
       host is dead.

       The sanlk-reset program can also be run on the same host as sanlk-resetd to  update  which
       lockspaces the local sanlk-resetd is watching for events.

OPTIONS

       --version, -V
              Print version.

       --help, -h
              Print usage.

       --foreground, -f
              Don't fork.

       --daemon-debug, -D
              Enable debugging to stderr and don't fork.

       --sysrq-reboot, -b 0|1
              Enable/Disable (1/0) use of /proc/sysrq-trigger to reboot.

       --sysrq-delay, -d sec
              Delay this many seconds before using /proc/sysrq-trigger.

       --resource-mode, -R 0|1
              Resource leases are used (1) or not used (0) to protect storage.

SEE ALSO

       sanlk-reset(8) sanlock(8) wdmd(8)

                                            2014-08-14                            SANLK-RESETD(8)