Provided by: bpfcc-tools_0.26.0+ds-1ubuntu1_all 
NAME
tcpconnect - Trace TCP active connections (connect()). Uses Linux eBPF/bcc.
SYNOPSIS
tcpconnect [-h] [-c] [-t] [-p PID] [-P PORT] [-4 | -6] [-L] [-u UID] [-U] [--cgroupmap
MAPPATH] [--mntnsmap MAPPATH] [-d]
DESCRIPTION
This tool traces active TCP connections (eg, via a connect() syscall; accept() are passive
connections). This can be useful for general troubleshooting to see what connections are
initiated by the local server.
All connection attempts are traced, even if they ultimately fail.
This works by tracing the kernel tcp_v4_connect() and tcp_v6_connect() functions using
dynamic tracing, and will need updating to match any changes to these functions.
When provided with the -d or --dns option, this tool will also correlate connect calls
with the most recent DNS query that matches the IP connected. This feature works by
tracing the kernel udp_recvmsg() function to collect DNS responses.
Since this uses BPF, only the root user can use this tool.
REQUIREMENTS
CONFIG_BPF and bcc.
If using the -d or --dns option, you must have the dnslib and cachetools python packages
installed. You can install them with pip3 or with apt on Ubuntu 18.04+ using the
python3-dnslib and python3-cachetools packages.
OPTIONS
-h Print usage message.
-t Include a timestamp column.
-c Count connects per src ip and dest ip/port.
-p PID Trace this process ID only (filtered in-kernel).
-P PORT
Comma-separated list of destination ports to trace (filtered in-kernel).
-4 Trace IPv4 family only.
-6 Trace IPv6 family only.
-L Include a LPORT column.
-U Include a UID column.
-u UID Trace this UID only (filtered in-kernel).
--cgroupmap MAPPATH
Trace cgroups in this BPF map only (filtered in-kernel).
--mntnsmap MAPPATH
Trace mount namespaces in this BPF map only (filtered in-kernel).
-d Shows the most recent DNS query for the IP address in the connect call. This is
likely related to the TCP connection details in the other columns, but is not
guaranteed. This feature works by tracing the udp_recvmsg kernel function and
tracking DNS responses received by the server. It only supports UDP DNS packets up
to 512 bytes in length. The python code keeps a cache of 10k DNS responses in
memory for up 24 hours.
If the time difference in milliseconds between when the system received a DNS
response and when a connect syscall was traced using an IP in that DNS response is
greater than 100ms, this tool will report this delta after the query. These deltas
should be relatively short for most applications. A long delay between the
response and connect could be either anomalous activity or indicate a
misattribution between the DNS name requested and the IP that the connect syscall
is using.
The -d option may not be used with the count feature (option -c)
EXAMPLES
Trace all active TCP connections:
# tcpconnect
Trace all TCP connects, and include timestamps:
# tcpconnect -t
Trace all TCP connects, and include most recent matching DNS query for each connected IP
# tcpconnect -d
Trace PID 181 only:
# tcpconnect -p 181
Trace ports 80 and 81 only:
# tcpconnect -P 80,81
Trace IPv4 family only:
# tcpconnect -4
Trace IPv6 family only:
# tcpconnect -6
Trace all TCP connects, and include LPORT:
# tcpconnect -L
Trace all TCP connects, and include UID:
# tcpconnect -U
Trace UID 1000 only:
# tcpconnect -u 1000
Count connects per src ip and dest ip/port:
# tcpconnect -c
Trace a set of cgroups only (see special_filtering.md from bcc sources for more details):
# tcpconnect --cgroupmap /sys/fs/bpf/test01
Trace a set of mount namespaces only (see special_filtering.md from bcc sources for more
details):
# tcpconnect --mntnsmap /sys/fs/bpf/mnt_ns_set
FIELDS
TIME(s)
Time of the call, in seconds.
UID User ID
PID Process ID
COMM Process name
IP IP address family (4 or 6)
SADDR Source IP address.
LPORT Source port
DADDR Destination IP address.
DPORT Destination port
CONNECTS
Accumulated active connections since start.
QUERY Shows the most recent DNS query for the IP address in the connect call. This is
likely related to the TCP connection details in the other columns, but is not
guaranteed.
OVERHEAD
This traces the kernel tcp_v[46]_connect functions and prints output for each event. As
the rate of this is generally expected to be low (< 1000/s), the overhead is also expected
to be negligible. If you have an application that is calling a high rate of connect()s,
such as a proxy server, then test and understand this overhead before use.
If you are using the -d option to track DNS requests, this tool will trace the udp_recvmsg
function and generate an event for any packets from UDP port 53. This event contains up
to 512 bytes of the UDP packet payload. Typical applications do not extensively use UDP,
so the performance overhead of tracing udp_recvmsg is expected to be negligible,
However, if you have an application that receives many UDP packets, then you should test
and understand the overhead of tracing every received UDP message. Furthermore,
performance overhead of running this tool on a DNS server is expected to be higher than
average because all DNS response packets will be copied to userspace.
SOURCE
This is from bcc.
https://github.com/iovisor/bcc
Also look in the bcc distribution for a companion _examples.txt file containing example
usage, output, and commentary for this tool.
OS
Linux
STABILITY
Unstable - in development.
AUTHOR
Brendan Gregg
SEE ALSO
tcptracer(8), tcpaccept(8), funccount(8), tcpdump(8)