Provided by: aria2_1.36.0-2_amd64 
NAME
aria2c - The ultra fast download utility
SYNOPSIS
aria2c [<OPTIONS>] [<URI>|<MAGNET>|<TORRENT_FILE>|<METALINK_FILE>] ...
DESCRIPTION
aria2 is a utility for downloading files. The supported protocols are HTTP(S), FTP, SFTP,
BitTorrent, and Metalink. aria2 can download a file from multiple sources/protocols and
tries to utilize your maximum download bandwidth. It supports downloading a file from
HTTP(S)/FTP /SFTP and BitTorrent at the same time, while the data downloaded from
HTTP(S)/FTP/SFTP is uploaded to the BitTorrent swarm. Using Metalink chunk checksums,
aria2 automatically validates chunks of data while downloading a file.
OPTIONS
NOTE:
Most FTP related options are applicable to SFTP as well. Some options are not
effective against SFTP (e.g., --ftp-pasv)
Basic Options
-d, --dir=<DIR>
The directory to store the downloaded file.
-i, --input-file=<FILE>
Downloads the URIs listed in FILE. You can specify multiple sources for a single
entity by putting multiple URIs on a single line separated by the TAB character.
Additionally, options can be specified after each URI line. Option lines must start
with one or more white space characters (SPACE or TAB) and must only contain one
option per line. Input files can use gzip compression. When FILE is specified as
-, aria2 will read the input from stdin. See the Input File subsection for
details. See also the --deferred-input option. See also the --save-session
option.
-l, --log=<LOG>
The file name of the log file. If - is specified, log is written to stdout. If
empty string("") is specified, or this option is omitted, no log is written to disk
at all.
-j, --max-concurrent-downloads=<N>
Set the maximum number of parallel downloads for every queue item. See also the
--split option. Default: 5
NOTE:
--max-concurrent-downloads limits the number of items which are downloaded
concurrently. --split and --min-split-size affect the number of connections
inside each item. Imagine that you have an input file (see --input-file option)
like this:
http://example.com/foo
http://example.com/bar
Here is 2 download items. aria2 can download these items concurrently if the
value more than or equal 2 is given to --max-concurrent-downloads. In each
download item, you can configure the number of connections using --split and/or
--min-split-size, etc.
-V, --check-integrity [true|false]
Check file integrity by validating piece hashes or a hash of entire file. This
option has effect only in BitTorrent, Metalink downloads with checksums or
HTTP(S)/FTP downloads with --checksum option. If piece hashes are provided, this
option can detect damaged portions of a file and re-download them. If a hash of
entire file is provided, hash check is only done when file has been already
download. This is determined by file length. If hash check fails, file is
re-downloaded from scratch. If both piece hashes and a hash of entire file are
provided, only piece hashes are used. Default: false
-c, --continue [true|false]
Continue downloading a partially downloaded file. Use this option to resume a
download started by a web browser or another program which downloads files
sequentially from the beginning. Currently this option is only applicable to
HTTP(S)/FTP downloads.
-h, --help[=<TAG>|<KEYWORD>]
The help messages are classified with tags. A tag starts with #. For example, type
--help=#http to get the usage for the options tagged with #http. If non-tag word is
given, print the usage for the options whose name includes that word. Available
Values: #basic, #advanced, #http, #https, #ftp, #metalink, #bittorrent, #cookie,
#hook, #file, #rpc, #checksum, #experimental, #deprecated, #help, #all Default:
#basic
HTTP/FTP/SFTP Options
--all-proxy=<PROXY>
Use a proxy server for all protocols. To override a previously defined proxy, use
"". You also can override this setting and specify a proxy server for a particular
protocol using --http-proxy, --https-proxy and --ftp-proxy options. This affects
all downloads. The format of PROXY is [http://][USER:PASSWORD@]HOST[:PORT]. See
also ENVIRONMENT section.
NOTE:
If user and password are embedded in proxy URI and they are also specified by
--{http,https,ftp,all}-proxy-{user,passwd} options, those specified later
override prior options. For example, if you specified http-proxy-user=myname,
http-proxy-passwd=mypass in aria2.conf and you specified
--http-proxy="http://proxy" on the command-line, then you'd get HTTP proxy
http://proxy with user myname and password mypass.
Another example: if you specified on the command-line
--http-proxy="http://user:pass@proxy" --http-proxy-user="myname"
--http-proxy-passwd="mypass", then you'd get HTTP proxy http://proxy with user
myname and password mypass.
One more example: if you specified in command-line --http-proxy-user="myname"
--http-proxy-passwd="mypass" --http-proxy="http://user:pass@proxy", then you'd
get HTTP proxy http://proxy with user user and password pass.
--all-proxy-passwd=<PASSWD>
Set password for --all-proxy option.
--all-proxy-user=<USER>
Set user for --all-proxy option.
--checksum=<TYPE>=<DIGEST>
Set checksum. TYPE is hash type. The supported hash type is listed in Hash
Algorithms in aria2c -v. DIGEST is hex digest. For example, setting sha-1 digest
looks like this: sha-1=0192ba11326fe2298c8cb4de616f4d4140213838 This option applies
only to HTTP(S)/FTP downloads.
--connect-timeout=<SEC>
Set the connect timeout in seconds to establish connection to HTTP/FTP/proxy
server. After the connection is established, this option makes no effect and
--timeout option is used instead. Default: 60
--dry-run [true|false]
If true is given, aria2 just checks whether the remote file is available and
doesn't download data. This option has effect on HTTP/FTP download. BitTorrent
downloads are canceled if true is specified. Default: false
--lowest-speed-limit=<SPEED>
Close connection if download speed is lower than or equal to this value(bytes per
sec). 0 means aria2 does not have a lowest speed limit. You can append K or M (1K
= 1024, 1M = 1024K). This option does not affect BitTorrent downloads. Default: 0
-x, --max-connection-per-server=<NUM>
The maximum number of connections to one server for each download. Default: 1
--max-file-not-found=<NUM>
If aria2 receives "file not found" status from the remote HTTP/FTP servers NUM
times without getting a single byte, then force the download to fail. Specify 0 to
disable this option. This options is effective only when using HTTP/FTP servers.
The number of retry attempt is counted toward --max-tries, so it should be
configured too.
Default: 0
-m, --max-tries=<N>
Set number of tries. 0 means unlimited. See also --retry-wait. Default: 5
-k, --min-split-size=<SIZE>
aria2 does not split less than 2*SIZE byte range. For example, let's consider
downloading 20MiB file. If SIZE is 10M, aria2 can split file into 2 range [0-10MiB)
and [10MiB-20MiB) and download it using 2 sources(if --split >= 2, of course). If
SIZE is 15M, since 2*15M > 20MiB, aria2 does not split file and download it using 1
source. You can append K or M (1K = 1024, 1M = 1024K). Possible Values: 1M -1024M
Default: 20M
--netrc-path=<FILE>
Specify the path to the netrc file. Default: $(HOME)/.netrc
NOTE:
Permission of the .netrc file must be 600. Otherwise, the file will be ignored.
-n, --no-netrc [true|false]
Disables netrc support. netrc support is enabled by default.
NOTE:
netrc file is only read at the startup if --no-netrc is false. So if --no-netrc
is true at the startup, no netrc is available throughout the session. You
cannot get netrc enabled even if you send --no-netrc=false using
aria2.changeGlobalOption().
--no-proxy=<DOMAINS>
Specify a comma separated list of host names, domains and network addresses with or
without a subnet mask where no proxy should be used.
NOTE:
For network addresses with a subnet mask, both IPv4 and IPv6 addresses work.
The current implementation does not resolve the host name in an URI to compare
network addresses specified in --no-proxy. So it is only effective if URI has
numeric IP addresses.
-o, --out=<FILE>
The file name of the downloaded file. It is always relative to the directory given
in --dir option. When the --force-sequential option is used, this option is
ignored.
NOTE:
You cannot specify a file name for Metalink or BitTorrent downloads. The file
name specified here is only used when the URIs fed to aria2 are given on the
command line directly, but not when using --input-file, --force-sequential
option.
Example:
$ aria2c -o myfile.zip "http://mirror1/file.zip" "http://mirror2/file.zip"
--proxy-method=<METHOD>
Set the method to use in proxy request. METHOD is either get or tunnel. HTTPS
downloads always use tunnel regardless of this option. Default: get
-R, --remote-time [true|false]
Retrieve timestamp of the remote file from the remote HTTP/FTP server and if it is
available, apply it to the local file. Default: false
--reuse-uri [true|false]
Reuse already used URIs if no unused URIs are left. Default: true
--retry-wait=<SEC>
Set the seconds to wait between retries. When SEC > 0, aria2 will retry downloads
when the HTTP server returns a 503 response. Default: 0
--server-stat-of=<FILE>
Specify the file name to which performance profile of the servers is saved. You can
load saved data using --server-stat-if option. See Server Performance Profile
subsection below for file format.
--server-stat-if=<FILE>
Specify the file name to load performance profile of the servers. The loaded data
will be used in some URI selector such as feedback. See also --uri-selector
option. See Server Performance Profile subsection below for file format.
--server-stat-timeout=<SEC>
Specifies timeout in seconds to invalidate performance profile of the servers since
the last contact to them. Default: 86400 (24hours)
-s, --split=<N>
Download a file using N connections. If more than N URIs are given, first N URIs
are used and remaining URIs are used for backup. If less than N URIs are given,
those URIs are used more than once so that N connections total are made
simultaneously. The number of connections to the same host is restricted by the
--max-connection-per-server option. See also the --min-split-size option.
Default: 5
NOTE:
Some Metalinks regulate the number of servers to connect. aria2 strictly
respects them. This means that if Metalink defines the maxconnections attribute
lower than N, then aria2 uses the value of this lower value instead of N.
--stream-piece-selector=<SELECTOR>
Specify piece selection algorithm used in HTTP/FTP download. Piece means fixed
length segment which is downloaded in parallel in segmented download. If default is
given, aria2 selects piece so that it reduces the number of establishing
connection. This is reasonable default behavior because establishing connection is
an expensive operation. If inorder is given, aria2 selects piece which has minimum
index. Index=0 means first of the file. This will be useful to view movie while
downloading it. --enable-http-pipelining option may be useful to reduce
re-connection overhead. Please note that aria2 honors --min-split-size option, so
it will be necessary to specify a reasonable value to --min-split-size option. If
random is given, aria2 selects piece randomly. Like inorder, --min-split-size
option is honored. If geom is given, at the beginning aria2 selects piece which
has minimum index like inorder, but it exponentially increasingly keeps space from
previously selected piece. This will reduce the number of establishing connection
and at the same time it will download the beginning part of the file first. This
will be useful to view movie while downloading it. Default: default
-t, --timeout=<SEC>
Set timeout in seconds. Default: 60
--uri-selector=<SELECTOR>
Specify URI selection algorithm. The possible values are inorder, feedback and
adaptive. If inorder is given, URI is tried in the order appeared in the URI list.
If feedback is given, aria2 uses download speed observed in the previous downloads
and choose fastest server in the URI list. This also effectively skips dead
mirrors. The observed download speed is a part of performance profile of servers
mentioned in --server-stat-of and --server-stat-if options. If adaptive is given,
selects one of the best mirrors for the first and reserved connections. For
supplementary ones, it returns mirrors which has not been tested yet, and if each
of them has already been tested, returns mirrors which has to be tested again.
Otherwise, it doesn't select anymore mirrors. Like feedback, it uses a performance
profile of servers. Default: feedback
HTTP Specific Options
--ca-certificate=<FILE>
Use the certificate authorities in FILE to verify the peers. The certificate file
must be in PEM format and can contain multiple CA certificates. Use
--check-certificate option to enable verification.
NOTE:
If you build with OpenSSL or the recent version of GnuTLS which has
gnutls_certificate_set_x509_system_trust() function and the library is properly
configured to locate the system-wide CA certificates store, aria2 will
automatically load those certificates at the startup.
NOTE:
WinTLS and AppleTLS do not support this option. Instead you will have to import
the certificate into the OS trust store.
--certificate=<FILE>
Use the client certificate in FILE. The certificate must be either in PKCS12 (.p12,
.pfx) or in PEM format.
PKCS12 files must contain the certificate, a key and optionally a chain of
additional certificates. Only PKCS12 files with a blank import password can be
opened!
When using PEM, you have to specify the private key via --private-key as well.
NOTE:
WinTLS does not support PEM files at the moment. Users have to use PKCS12 files.
NOTE:
AppleTLS users should use the KeyChain Access utility to import the client
certificate and get the SHA-1 fingerprint from the Information dialog
corresponding to that certificate. To start aria2c use --certificate=<SHA-1>.
Alternatively PKCS12 files are also supported. PEM files, however, are not
supported.
--check-certificate [true|false]
Verify the peer using certificates specified in --ca-certificate option. Default:
true
--http-accept-gzip [true|false]
Send Accept: deflate, gzip request header and inflate response if remote server
responds with Content-Encoding: gzip or Content-Encoding: deflate. Default: false
NOTE:
Some server responds with Content-Encoding: gzip for files which itself is
gzipped file. aria2 inflates them anyway because of the response header.
--http-auth-challenge [true|false]
Send HTTP authorization header only when it is requested by the server. If false is
set, then authorization header is always sent to the server. There is an
exception: if user name and password are embedded in URI, authorization header is
always sent to the server regardless of this option. Default: false
--http-no-cache [true|false]
Send Cache-Control: no-cache and Pragma: no-cache header to avoid cached content.
If false is given, these headers are not sent and you can add Cache-Control header
with a directive you like using --header option. Default: false
--http-user=<USER>
Set HTTP user. This affects all URIs.
--http-passwd=<PASSWD>
Set HTTP password. This affects all URIs.
--http-proxy=<PROXY>
Use a proxy server for HTTP. To override a previously defined proxy, use "". See
also the --all-proxy option. This affects all http downloads. The format of PROXY
is [http://][USER:PASSWORD@]HOST[:PORT]
--http-proxy-passwd=<PASSWD>
Set password for --http-proxy.
--http-proxy-user=<USER>
Set user for --http-proxy.
--https-proxy=<PROXY>
Use a proxy server for HTTPS. To override a previously defined proxy, use "". See
also the --all-proxy option. This affects all https download. The format of PROXY
is [http://][USER:PASSWORD@]HOST[:PORT]
--https-proxy-passwd=<PASSWD>
Set password for --https-proxy.
--https-proxy-user=<USER>
Set user for --https-proxy.
--private-key=<FILE>
Use the private key in FILE. The private key must be decrypted and in PEM format.
The behavior when encrypted one is given is undefined. See also --certificate
option.
--referer=<REFERER>
Set an http referrer (Referer). This affects all http/https downloads. If * is
given, the download URI is also used as the referrer. This may be useful when used
together with the --parameterized-uri option.
--enable-http-keep-alive [true|false]
Enable HTTP/1.1 persistent connection. Default: true
--enable-http-pipelining [true|false]
Enable HTTP/1.1 pipelining. Default: false
NOTE:
In performance perspective, there is usually no advantage to enable this option.
--header=<HEADER>
Append HEADER to HTTP request header. You can use this option repeatedly to
specify more than one header:
$ aria2c --header="X-A: b78" --header="X-B: 9J1" "http://host/file"
--load-cookies=<FILE>
Load Cookies from FILE using the Firefox3 format (SQLite3), Chromium/Google Chrome
(SQLite3) and the Mozilla/Firefox(1.x/2.x)/Netscape format.
NOTE:
If aria2 is built without libsqlite3, then it doesn't support Firefox3 and
Chromium/Google Chrome cookie format.
--save-cookies=<FILE>
Save Cookies to FILE in Mozilla/Firefox(1.x/2.x)/ Netscape format. If FILE already
exists, it is overwritten. Session Cookies are also saved and their expiry values
are treated as 0. Possible Values: /path/to/file
--use-head [true|false]
Use HEAD method for the first request to the HTTP server. Default: false
-U, --user-agent=<USER_AGENT>
Set user agent for HTTP(S) downloads. Default: aria2/$VERSION, $VERSION is
replaced by package version.
FTP/SFTP Specific Options
--ftp-user=<USER>
Set FTP user. This affects all URIs. Default: anonymous
--ftp-passwd=<PASSWD>
Set FTP password. This affects all URIs. If user name is embedded but password is
missing in URI, aria2 tries to resolve password using .netrc. If password is found
in .netrc, then use it as password. If not, use the password specified in this
option. Default: ARIA2USER@
-p, --ftp-pasv [true|false]
Use the passive mode in FTP. If false is given, the active mode will be used.
Default: true
NOTE:
This option is ignored for SFTP transfer.
--ftp-proxy=<PROXY>
Use a proxy server for FTP. To override a previously defined proxy, use "". See
also the --all-proxy option. This affects all ftp downloads. The format of PROXY
is [http://][USER:PASSWORD@]HOST[:PORT]
--ftp-proxy-passwd=<PASSWD>
Set password for --ftp-proxy option.
--ftp-proxy-user=<USER>
Set user for --ftp-proxy option.
--ftp-type=<TYPE>
Set FTP transfer type. TYPE is either binary or ascii. Default: binary
NOTE:
This option is ignored for SFTP transfer.
--ftp-reuse-connection [true|false]
Reuse connection in FTP. Default: true
--ssh-host-key-md=<TYPE>=<DIGEST>
Set checksum for SSH host public key. TYPE is hash type. The supported hash type is
sha-1 or md5. DIGEST is hex digest. For example:
sha-1=b030503d4de4539dc7885e6f0f5e256704edf4c3. This option can be used to
validate server's public key when SFTP is used. If this option is not set, which is
default, no validation takes place.
BitTorrent/Metalink Options
--select-file=<INDEX>...
Set file to download by specifying its index. You can find the file index using
the --show-files option. Multiple indexes can be specified by using ,, for
example: 3,6. You can also use - to specify a range: 1-5. , and - can be used
together: 1-5,8,9. When used with the -M option, index may vary depending on the
query (see --metalink-* options).
NOTE:
In multi file torrent, the adjacent files specified by this option may also be
downloaded. This is by design, not a bug. A single piece may include several
files or part of files, and aria2 writes the piece to the appropriate files.
-S, --show-files [true|false]
Print file listing of ".torrent", ".meta4" and ".metalink" file and exit. In case
of ".torrent" file, additional information (infohash, piece length, etc) is also
printed.
BitTorrent Specific Options
--bt-detach-seed-only [true|false]
Exclude seed only downloads when counting concurrent active downloads (See -j
option). This means that if -j3 is given and this option is turned on and 3
downloads are active and one of those enters seed mode, then it is excluded from
active download count (thus it becomes 2), and the next download waiting in queue
gets started. But be aware that seeding item is still recognized as active download
in RPC method. Default: false
--bt-enable-hook-after-hash-check [true|false]
Allow hook command invocation after hash check (see -V option) in BitTorrent
download. By default, when hash check succeeds, the command given by
--on-bt-download-complete is executed. To disable this action, give false to this
option. Default: true
--bt-enable-lpd [true|false]
Enable Local Peer Discovery. If a private flag is set in a torrent, aria2 doesn't
use this feature for that download even if true is given. Default: false
--bt-exclude-tracker=<URI>[,...]
Comma separated list of BitTorrent tracker's announce URI to remove. You can use
special value * which matches all URIs, thus removes all announce URIs. When
specifying * in shell command-line, don't forget to escape or quote it. See also
--bt-tracker option.
--bt-external-ip=<IPADDRESS>
Specify the external IP address to use in BitTorrent download and DHT. It may be
sent to BitTorrent tracker. For DHT, this option should be set to report that local
node is downloading a particular torrent. This is critical to use DHT in a private
network. Although this function is named external, it can accept any kind of IP
addresses.
--bt-force-encryption [true|false]
Requires BitTorrent message payload encryption with arc4. This is a shorthand of
--bt-require-crypto --bt-min-crypto-level=arc4. This option does not change the
option value of those options. If true is given, deny legacy BitTorrent handshake
and only use Obfuscation handshake and always encrypt message payload. Default:
false
--bt-hash-check-seed [true|false]
If true is given, after hash check using --check-integrity option and file is
complete, continue to seed file. If you want to check file and download it only
when it is damaged or incomplete, set this option to false. This option has effect
only on BitTorrent download. Default: true
--bt-load-saved-metadata [true|false]
Before getting torrent metadata from DHT when downloading with magnet link, first
try to read file saved by --bt-save-metadata option. If it is successful, then
skip downloading metadata from DHT. Default: false
--bt-lpd-interface=<INTERFACE>
Use given interface for Local Peer Discovery. If this option is not specified, the
default interface is chosen. You can specify interface name and IP address.
Possible Values: interface, IP address
--bt-max-open-files=<NUM>
Specify maximum number of files to open in multi-file BitTorrent/Metalink download
globally. Default: 100
--bt-max-peers=<NUM>
Specify the maximum number of peers per torrent. 0 means unlimited. See also
--bt-request-peer-speed-limit option. Default: 55
--bt-metadata-only [true|false]
Download meta data only. The file(s) described in meta data will not be downloaded.
This option has effect only when BitTorrent Magnet URI is used. See also
--bt-save-metadata option. Default: false
--bt-min-crypto-level=plain|arc4
Set minimum level of encryption method. If several encryption methods are provided
by a peer, aria2 chooses the lowest one which satisfies the given level. Default:
plain
--bt-prioritize-piece=head[=<SIZE>],tail[=<SIZE>]
Try to download first and last pieces of each file first. This is useful for
previewing files. The argument can contain 2 keywords: head and tail. To include
both keywords, they must be separated by comma. These keywords can take one
parameter, SIZE. For example, if head=<SIZE> is specified, pieces in the range of
first SIZE bytes of each file get higher priority. tail=<SIZE> means the range of
last SIZE bytes of each file. SIZE can include K or M (1K = 1024, 1M = 1024K). If
SIZE is omitted, SIZE=1M is used.
--bt-remove-unselected-file [true|false]
Removes the unselected files when download is completed in BitTorrent. To select
files, use --select-file option. If it is not used, all files are assumed to be
selected. Please use this option with care because it will actually remove files
from your disk. Default: false
--bt-require-crypto [true|false]
If true is given, aria2 doesn't accept and establish connection with legacy
BitTorrent handshake(\19BitTorrent protocol). Thus aria2 always uses Obfuscation
handshake. Default: false
--bt-request-peer-speed-limit=<SPEED>
If the whole download speed of every torrent is lower than SPEED, aria2 temporarily
increases the number of peers to try for more download speed. Configuring this
option with your preferred download speed can increase your download speed in some
cases. You can append K or M (1K = 1024, 1M = 1024K). Default: 50K
--bt-save-metadata [true|false]
Save meta data as ".torrent" file. This option has effect only when BitTorrent
Magnet URI is used. The file name is hex encoded info hash with suffix ".torrent".
The directory to be saved is the same directory where download file is saved. If
the same file already exists, meta data is not saved. See also --bt-metadata-only
option. Default: false
--bt-seed-unverified [true|false]
Seed previously downloaded files without verifying piece hashes. Default: false
--bt-stop-timeout=<SEC>
Stop BitTorrent download if download speed is 0 in consecutive SEC seconds. If 0 is
given, this feature is disabled. Default: 0
--bt-tracker=<URI>[,...]
Comma separated list of additional BitTorrent tracker's announce URI. These URIs
are not affected by --bt-exclude-tracker option because they are added after URIs
in --bt-exclude-tracker option are removed.
--bt-tracker-connect-timeout=<SEC>
Set the connect timeout in seconds to establish connection to tracker. After the
connection is established, this option makes no effect and --bt-tracker-timeout
option is used instead. Default: 60
--bt-tracker-interval=<SEC>
Set the interval in seconds between tracker requests. This completely overrides
interval value and aria2 just uses this value and ignores the min interval and
interval value in the response of tracker. If 0 is set, aria2 determines interval
based on the response of tracker and the download progress. Default: 0
--bt-tracker-timeout=<SEC>
Set timeout in seconds. Default: 60
--dht-entry-point=<HOST>:<PORT>
Set host and port as an entry point to IPv4 DHT network.
--dht-entry-point6=<HOST>:<PORT>
Set host and port as an entry point to IPv6 DHT network.
--dht-file-path=<PATH>
Change the IPv4 DHT routing table file to PATH. Default: $HOME/.aria2/dht.dat if
present, otherwise $XDG_CACHE_HOME/aria2/dht.dat.
--dht-file-path6=<PATH>
Change the IPv6 DHT routing table file to PATH. Default: $HOME/.aria2/dht6.dat if
present, otherwise $XDG_CACHE_HOME/aria2/dht6.dat.
--dht-listen-addr6=<ADDR>
Specify address to bind socket for IPv6 DHT. It should be a global unicast IPv6
address of the host.
--dht-listen-port=<PORT>...
Set UDP listening port used by DHT(IPv4, IPv6) and UDP tracker. Multiple ports can
be specified by using ,, for example: 6881,6885. You can also use - to specify a
range: 6881-6999. , and - can be used together. Default: 6881-6999
NOTE:
Make sure that the specified ports are open for incoming UDP traffic.
--dht-message-timeout=<SEC>
Set timeout in seconds. Default: 10
--enable-dht [true|false]
Enable IPv4 DHT functionality. It also enables UDP tracker support. If a private
flag is set in a torrent, aria2 doesn't use DHT for that download even if true is
given. Default: true
--enable-dht6 [true|false]
Enable IPv6 DHT functionality. If a private flag is set in a torrent, aria2 doesn't
use DHT for that download even if true is given. Use --dht-listen-port option to
specify port number to listen on. See also --dht-listen-addr6 option.
--enable-peer-exchange [true|false]
Enable Peer Exchange extension. If a private flag is set in a torrent, this feature
is disabled for that download even if true is given. Default: true
--follow-torrent=true|false|mem
If true or mem is specified, when a file whose suffix is .torrent or content type
is application/x-bittorrent is downloaded, aria2 parses it as a torrent file and
downloads files mentioned in it. If mem is specified, a torrent file is not
written to the disk, but is just kept in memory. If false is specified, the
.torrent file is downloaded to the disk, but is not parsed as a torrent and its
contents are not downloaded. Default: true
-O, --index-out=<INDEX>=<PATH>
Set file path for file with index=INDEX. You can find the file index using the
--show-files option. PATH is a relative path to the path specified in --dir
option. You can use this option multiple times. Using this option, you can specify
the output file names of BitTorrent downloads.
--listen-port=<PORT>...
Set TCP port number for BitTorrent downloads. Multiple ports can be specified by
using ,, for example: 6881,6885. You can also use - to specify a range:
6881-6999. , and - can be used together: 6881-6889,6999. Default: 6881-6999
NOTE:
Make sure that the specified ports are open for incoming TCP traffic.
--max-overall-upload-limit=<SPEED>
Set max overall upload speed in bytes/sec. 0 means unrestricted. You can append K
or M (1K = 1024, 1M = 1024K). To limit the upload speed per torrent, use
--max-upload-limit option. Default: 0
-u, --max-upload-limit=<SPEED>
Set max upload speed per each torrent in bytes/sec. 0 means unrestricted. You can
append K or M (1K = 1024, 1M = 1024K). To limit the overall upload speed, use
--max-overall-upload-limit option. Default: 0
--peer-id-prefix=<PEER_ID_PREFIX>
Specify the prefix of peer ID. The peer ID in BitTorrent is 20 byte length. If more
than 20 bytes are specified, only first 20 bytes are used. If less than 20 bytes
are specified, random byte data are added to make its length 20 bytes.
Default: A2-$MAJOR-$MINOR-$PATCH-, $MAJOR, $MINOR and $PATCH are replaced by major,
minor and patch version number respectively. For instance, aria2 version 1.18.8
has prefix ID A2-1-18-8-.
--peer-agent=<PEER_AGENT>
Specify the string used during the bitorrent extended handshake for the peer's
client version.
Default: aria2/$MAJOR.$MINOR.$PATCH, $MAJOR, $MINOR and $PATCH are replaced by
major, minor and patch version number respectively. For instance, aria2 version
1.18.8 has peer agent aria2/1.18.8.
--seed-ratio=<RATIO>
Specify share ratio. Seed completed torrents until share ratio reaches RATIO. You
are strongly encouraged to specify equals or more than 1.0 here. Specify 0.0 if
you intend to do seeding regardless of share ratio. If --seed-time option is
specified along with this option, seeding ends when at least one of the conditions
is satisfied. Default: 1.0
--seed-time=<MINUTES>
Specify seeding time in (fractional) minutes. Also see the --seed-ratio option.
NOTE:
Specifying --seed-time=0 disables seeding after download completed.
-T, --torrent-file=<TORRENT_FILE>
The path to the ".torrent" file. You are not required to use this option because
you can specify ".torrent" files without --torrent-file.
Metalink Specific Options
--follow-metalink=true|false|mem
If true or mem is specified, when a file whose suffix is .meta4 or .metalink or
content type of application/metalink4+xml or application/metalink+xml is
downloaded, aria2 parses it as a metalink file and downloads files mentioned in it.
If mem is specified, a metalink file is not written to the disk, but is just kept
in memory. If false is specified, the .metalink file is downloaded to the disk,
but is not parsed as a metalink file and its contents are not downloaded. Default:
true
--metalink-base-uri=<URI>
Specify base URI to resolve relative URI in metalink:url and metalink:metaurl
element in a metalink file stored in local disk. If URI points to a directory, URI
must end with /.
-M, --metalink-file=<METALINK_FILE>
The file path to ".meta4" and ".metalink" file. Reads input from stdin when - is
specified. You are not required to use this option because you can specify
".metalink" files without --metalink-file.
--metalink-language=<LANGUAGE>
The language of the file to download.
--metalink-location=<LOCATION>[,...]
The location of the preferred server. A comma-delimited list of locations is
acceptable, for example, jp,us.
--metalink-os=<OS>
The operating system of the file to download.
--metalink-version=<VERSION>
The version of the file to download.
--metalink-preferred-protocol=<PROTO>
Specify preferred protocol. The possible values are http, https, ftp and none.
Specify none to disable this feature. Default: none
--metalink-enable-unique-protocol [true|false]
If true is given and several protocols are available for a mirror in a metalink
file, aria2 uses one of them. Use --metalink-preferred-protocol option to specify
the preference of protocol. Default: true
RPC Options
--enable-rpc [true|false]
Enable JSON-RPC/XML-RPC server. It is strongly recommended to set secret
authorization token using --rpc-secret option. See also --rpc-listen-port option.
Default: false
--pause [true|false]
Pause download after added. This option is effective only when --enable-rpc=true is
given. Default: false
--pause-metadata [true|false]
Pause downloads created as a result of metadata download. There are 3 types of
metadata downloads in aria2: (1) downloading .torrent file. (2) downloading torrent
metadata using magnet link. (3) downloading metalink file. These metadata
downloads will generate downloads using their metadata. This option pauses these
subsequent downloads. This option is effective only when --enable-rpc=true is
given. Default: false
--rpc-allow-origin-all [true|false]
Add Access-Control-Allow-Origin header field with value * to the RPC response.
Default: false
--rpc-certificate=<FILE>
Use the certificate in FILE for RPC server. The certificate must be either in
PKCS12 (.p12, .pfx) or in PEM format.
PKCS12 files must contain the certificate, a key and optionally a chain of
additional certificates. Only PKCS12 files with a blank import password can be
opened!
When using PEM, you have to specify the private key via --rpc-private-key as well.
Use --rpc-secure option to enable encryption.
NOTE:
WinTLS does not support PEM files at the moment. Users have to use PKCS12 files.
NOTE:
AppleTLS users should use the KeyChain Access utility to first generate a
self-signed SSL-Server certificate, e.g. using the wizard, and get the SHA-1
fingerprint from the Information dialog corresponding to that new certificate.
To start aria2c with --rpc-secure use --rpc-certificate=<SHA-1>. Alternatively
PKCS12 files are also supported. PEM files, however, are not supported.
--rpc-listen-all [true|false]
Listen incoming JSON-RPC/XML-RPC requests on all network interfaces. If false is
given, listen only on local loopback interface. Default: false
--rpc-listen-port=<PORT>
Specify a port number for JSON-RPC/XML-RPC server to listen to. Possible Values:
1024 -65535 Default: 6800
--rpc-max-request-size=<SIZE>
Set max size of JSON-RPC/XML-RPC request. If aria2 detects the request is more than
SIZE bytes, it drops connection. Default: 2M
--rpc-passwd=<PASSWD>
Set JSON-RPC/XML-RPC password.
WARNING:
--rpc-passwd option will be deprecated in the future release. Migrate to
--rpc-secret option as soon as possible.
--rpc-private-key=<FILE>
Use the private key in FILE for RPC server. The private key must be decrypted and
in PEM format. Use --rpc-secure option to enable encryption. See also
--rpc-certificate option.
--rpc-save-upload-metadata [true|false]
Save the uploaded torrent or metalink meta data in the directory specified by --dir
option. The file name consists of SHA-1 hash hex string of meta data plus
extension. For torrent, the extension is '.torrent'. For metalink, it is '.meta4'.
If false is given to this option, the downloads added by aria2.addTorrent() or
aria2.addMetalink() will not be saved by --save-session option. Default: true
--rpc-secret=<TOKEN>
Set RPC secret authorization token. Read RPC authorization secret token to know how
this option value is used.
--rpc-secure [true|false]
RPC transport will be encrypted by SSL/TLS. The RPC clients must use https scheme
to access the server. For WebSocket client, use wss scheme. Use --rpc-certificate
and --rpc-private-key options to specify the server certificate and private key.
--rpc-user=<USER>
Set JSON-RPC/XML-RPC user.
WARNING:
--rpc-user option will be deprecated in the future release. Migrate to
--rpc-secret option as soon as possible.
Advanced Options
--allow-overwrite [true|false]
Restart download from scratch if the corresponding control file doesn't exist. See
also --auto-file-renaming option. Default: false
--allow-piece-length-change [true|false]
If false is given, aria2 aborts download when a piece length is different from one
in a control file. If true is given, you can proceed but some download progress
will be lost. Default: false
--always-resume [true|false]
Always resume download. If true is given, aria2 always tries to resume download and
if resume is not possible, aborts download. If false is given, when all given URIs
do not support resume or aria2 encounters N URIs which does not support resume (N
is the value specified using --max-resume-failure-tries option), aria2 downloads
file from scratch. See --max-resume-failure-tries option. Default: true
--async-dns [true|false]
Enable asynchronous DNS. Default: true
--async-dns-server=<IPADDRESS>[,...]
Comma separated list of DNS server address used in asynchronous DNS resolver.
Usually asynchronous DNS resolver reads DNS server addresses from /etc/resolv.conf.
When this option is used, it uses DNS servers specified in this option instead of
ones in /etc/resolv.conf. You can specify both IPv4 and IPv6 address. This option
is useful when the system does not have /etc/resolv.conf and user does not have the
permission to create it.
--auto-file-renaming [true|false]
Rename file name if the same file already exists. This option works only in
HTTP(S)/FTP download. The new file name has a dot and a number(1..9999) appended
after the name, but before the file extension, if any. Default: true
--auto-save-interval=<SEC>
Save a control file(*.aria2) every SEC seconds. If 0 is given, a control file is
not saved during download. aria2 saves a control file when it stops regardless of
the value. The possible values are between 0 to 600. Default: 60
--conditional-get [true|false]
Download file only when the local file is older than remote file. This function
only works with HTTP(S) downloads only. It does not work if file size is specified
in Metalink. It also ignores Content-Disposition header. If a control file exists,
this option will be ignored. This function uses If-Modified-Since header to get
only newer file conditionally. When getting modification time of local file, it
uses user supplied file name (see --out option) or file name part in URI if --out
is not specified. To overwrite existing file, --allow-overwrite is required.
Default: false
--conf-path=<PATH>
Change the configuration file path to PATH. Default: $HOME/.aria2/aria2.conf if
present, otherwise $XDG_CONFIG_HOME/aria2/aria2.conf.
--console-log-level=<LEVEL>
Set log level to output to console. LEVEL is either debug, info, notice, warn or
error. Default: notice
--content-disposition-default-utf8 [true|false]
Handle quoted string in Content-Disposition header as UTF-8 instead of ISO-8859-1,
for example, the filename parameter, but not the extended version filename*.
Default: false
-D, --daemon [true|false]
Run as daemon. The current working directory will be changed to / and standard
input, standard output and standard error will be redirected to /dev/null. Default:
false
--deferred-input [true|false]
If true is given, aria2 does not read all URIs and options from file specified by
--input-file option at startup, but it reads one by one when it needs later. This
may reduce memory usage if input file contains a lot of URIs to download. If false
is given, aria2 reads all URIs and options at startup. Default: false
WARNING:
--deferred-input option will be disabled when --save-session is used together.
--disable-ipv6 [true|false]
Disable IPv6. This is useful if you have to use broken DNS and want to avoid
terribly slow AAAA record lookup. Default: false
--disk-cache=<SIZE>
Enable disk cache. If SIZE is 0, the disk cache is disabled. This feature caches
the downloaded data in memory, which grows to at most SIZE bytes. The cache storage
is created for aria2 instance and shared by all downloads. The one advantage of the
disk cache is reduce the disk I/O because the data are written in larger unit and
it is reordered by the offset of the file. If hash checking is involved and the
data are cached in memory, we don't need to read them from the disk. SIZE can
include K or M (1K = 1024, 1M = 1024K). Default: 16M
--download-result=<OPT>
This option changes the way Download Results is formatted. If OPT is default, print
GID, status, average download speed and path/URI. If multiple files are involved,
path/URI of first requested file is printed and remaining ones are omitted. If OPT
is full, print GID, status, average download speed, percentage of progress and
path/URI. The percentage of progress and path/URI are printed for each requested
file in each row. If OPT is hide, Download Results is hidden. Default: default
--dscp=<DSCP>
Set DSCP value in outgoing IP packets of BitTorrent traffic for QoS. This parameter
sets only DSCP bits in TOS field of IP packets, not the whole field. If you take
values from /usr/include/netinet/ip.h divide them by 4 (otherwise values would be
incorrect, e.g. your CS1 class would turn into CS4). If you take commonly used
values from RFC, network vendors' documentation, Wikipedia or any other source, use
them as they are.
--rlimit-nofile=<NUM>
Set the soft limit of open file descriptors. This open will only have effect when:
a. The system supports it (posix)
b. The limit does not exceed the hard limit.
c. The specified limit is larger than the current soft limit.
This is equivalent to setting nofile via ulimit, except that it will never decrease
the limit.
This option is only available on systems supporting the rlimit API.
--enable-color [true|false]
Enable color output for a terminal. Default: true
--enable-mmap [true|false]
Map files into memory. This option may not work if the file space is not
pre-allocated. See --file-allocation.
Default: false
--event-poll=<POLL>
Specify the method for polling events. The possible values are epoll, kqueue,
port, poll and select. For each epoll, kqueue, port and poll, it is available if
system supports it. epoll is available on recent Linux. kqueue is available on
various *BSD systems including Mac OS X. port is available on Open Solaris. The
default value may vary depending on the system you use.
--file-allocation=<METHOD>
Specify file allocation method. none doesn't pre-allocate file space. prealloc
pre-allocates file space before download begins. This may take some time depending
on the size of the file. If you are using newer file systems such as ext4 (with
extents support), btrfs, xfs or NTFS(MinGW build only), falloc is your best choice.
It allocates large(few GiB) files almost instantly. Don't use falloc with legacy
file systems such as ext3 and FAT32 because it takes almost same time as prealloc
and it blocks aria2 entirely until allocation finishes. falloc may not be available
if your system doesn't have posix_fallocate(3) function. trunc uses ftruncate(2)
system call or platform-specific counterpart to truncate a file to a specified
length.
Possible Values: none, prealloc, trunc, falloc Default: prealloc
WARNING:
Using trunc seemingly allocates disk space very quickly, but what it actually
does is that it sets file length metadata in file system, and does not allocate
disk space at all. This means that it does not help avoiding fragmentation.
NOTE:
In multi file torrent downloads, the files adjacent forward to the specified
files are also allocated if they share the same piece.
--force-save [true|false]
Save download with --save-session option even if the download is completed or
removed. This option also saves control file in that situations. This may be useful
to save BitTorrent seeding which is recognized as completed state. Default: false
--save-not-found [true|false]
Save download with --save-session option even if the file was not found on the
server. This option also saves control file in that situations. Default: true
--gid=<GID>
Set GID manually. aria2 identifies each download by the ID called GID. The GID must
be hex string of 16 characters, thus [0-9a-fA-F] are allowed and leading zeros must
not be stripped. The GID all 0 is reserved and must not be used. The GID must be
unique, otherwise error is reported and the download is not added. This option is
useful when restoring the sessions saved using --save-session option. If this
option is not used, new GID is generated by aria2.
--hash-check-only [true|false]
If true is given, after hash check using --check-integrity option, abort download
whether or not download is complete. Default: false
--human-readable [true|false]
Print sizes and speed in human readable format (e.g., 1.2Ki, 3.4Mi) in the console
readout. Default: true
--interface=<INTERFACE>
Bind sockets to given interface. You can specify interface name, IP address and
host name. Possible Values: interface, IP address, host name
NOTE:
If an interface has multiple addresses, it is highly recommended to specify IP
address explicitly. See also --disable-ipv6. If your system doesn't have
getifaddrs(3), this option doesn't accept interface name.
--keep-unfinished-download-result [true|false]
Keep unfinished download results even if doing so exceeds --max-download-result.
This is useful if all unfinished downloads must be saved in session file (see
--save-session option). Please keep in mind that there is no upper bound to the
number of unfinished download result to keep. If that is undesirable, turn this
option off. Default: true
--max-download-result=<NUM>
Set maximum number of download result kept in memory. The download results are
completed/error/removed downloads. The download results are stored in FIFO queue
and it can store at most NUM download results. When queue is full and new download
result is created, oldest download result is removed from the front of the queue
and new one is pushed to the back. Setting big number in this option may result
high memory consumption after thousands of downloads. Specifying 0 means no
download result is kept. Note that unfinished downloads are kept in memory
regardless of this option value. See --keep-unfinished-download-result option.
Default: 1000
--max-mmap-limit=<SIZE>
Set the maximum file size to enable mmap (see --enable-mmap option). The file size
is determined by the sum of all files contained in one download. For example, if a
download contains 5 files, then file size is the total size of those files. If file
size is strictly greater than the size specified in this option, mmap will be
disabled. Default: 9223372036854775807
--max-resume-failure-tries=<N>
When used with --always-resume=false, aria2 downloads file from scratch when aria2
detects N number of URIs that does not support resume. If N is 0, aria2 downloads
file from scratch when all given URIs do not support resume. See --always-resume
option. Default: 0
--min-tls-version=<VERSION>
Specify minimum SSL/TLS version to enable. Possible Values: TLSv1.1, TLSv1.2,
TLSv1.3 Default: TLSv1.2
--multiple-interface=<INTERFACES>
Comma separated list of interfaces to bind sockets to. Requests will be splited
among the interfaces to achieve link aggregation. You can specify interface name,
IP address and hostname. If --interface is used, this option will be ignored.
Possible Values: interface, IP address, hostname
--log-level=<LEVEL>
Set log level to output. LEVEL is either debug, info, notice, warn or error.
Default: debug
--on-bt-download-complete=<COMMAND>
For BitTorrent, a command specified in --on-download-complete is called after
download completed and seeding is over. On the other hand, this option set the
command to be executed after download completed but before seeding. See Event Hook
for more details about COMMAND. Possible Values: /path/to/command
--on-download-complete=<COMMAND>
Set the command to be executed after download completed. See Event Hook for more
details about COMMAND. See also --on-download-stop option. Possible Values:
/path/to/command
--on-download-error=<COMMAND>
Set the command to be executed after download aborted due to error. See Event Hook
for more details about COMMAND. See also --on-download-stop option. Possible
Values: /path/to/command
--on-download-pause=<COMMAND>
Set the command to be executed after download was paused. See Event Hook for more
details about COMMAND. Possible Values: /path/to/command
--on-download-start=<COMMAND>
Set the command to be executed after download got started. See Event Hook for more
details about COMMAND. Possible Values: /path/to/command
--on-download-stop=<COMMAND>
Set the command to be executed after download stopped. You can override the command
to be executed for particular download result using --on-download-complete and
--on-download-error. If they are specified, command specified in this option is not
executed. See Event Hook for more details about COMMAND. Possible Values:
/path/to/command
--optimize-concurrent-downloads [true|false|<A>:<B>]
Optimizes the number of concurrent downloads according to the bandwidth available.
aria2 uses the download speed observed in the previous downloads to adapt the
number of downloads launched in parallel according to the rule N = A + B
Log10(speed in Mbps). The coefficients A and B can be customized in the option
arguments with A and B separated by a colon. The default values (A=5, B=25) lead to
using typically 5 parallel downloads on 1Mbps networks and above 50 on 100Mbps
networks. The number of parallel downloads remains constrained under the maximum
defined by the --max-concurrent-downloads parameter. Default: false
--piece-length=<LENGTH>
Set a piece length for HTTP/FTP downloads. This is the boundary when aria2 splits a
file. All splits occur at multiple of this length. This option will be ignored in
BitTorrent downloads. It will be also ignored if Metalink file contains piece
hashes. Default: 1M
NOTE:
The possible use case of --piece-length option is change the request range in
one HTTP pipelined request. To enable HTTP pipelining use
--enable-http-pipelining.
--show-console-readout [true|false]
Show console readout. Default: true
--stderr [true|false]
Redirect all console output that would be otherwise printed in stdout to stderr.
Default: false
--summary-interval=<SEC>
Set interval in seconds to output download progress summary. Setting 0 suppresses
the output. Default: 60
-Z, --force-sequential [true|false]
Fetch URIs in the command-line sequentially and download each URI in a separate
session, like the usual command-line download utilities. Default: false
--max-overall-download-limit=<SPEED>
Set max overall download speed in bytes/sec. 0 means unrestricted. You can append
K or M (1K = 1024, 1M = 1024K). To limit the download speed per download, use
--max-download-limit option. Default: 0
--max-download-limit=<SPEED>
Set max download speed per each download in bytes/sec. 0 means unrestricted. You
can append K or M (1K = 1024, 1M = 1024K). To limit the overall download speed,
use --max-overall-download-limit option. Default: 0
--no-conf [true|false]
Disable loading aria2.conf file.
--no-file-allocation-limit=<SIZE>
No file allocation is made for files whose size is smaller than SIZE. You can
append K or M (1K = 1024, 1M = 1024K). Default: 5M
-P, --parameterized-uri [true|false]
Enable parameterized URI support. You can specify set of parts:
http://{sv1,sv2,sv3}/foo.iso. Also you can specify numeric sequences with step
counter: http://host/image[000-100:2].img. A step counter can be omitted. If all
URIs do not point to the same file, such as the second example above, -Z option is
required. Default: false
-q, --quiet [true|false]
Make aria2 quiet (no console output). Default: false
--realtime-chunk-checksum [true|false]
Validate chunk of data by calculating checksum while downloading a file if chunk
checksums are provided. Default: true
--remove-control-file [true|false]
Remove control file before download. Using with --allow-overwrite=true, download
always starts from scratch. This will be useful for users behind proxy server which
disables resume.
--save-session=<FILE>
Save error/unfinished downloads to FILE on exit. You can pass this output file to
aria2c with --input-file option on restart. If you like the output to be gzipped
append a .gz extension to the file name. Please note that downloads added by
aria2.addTorrent() and aria2.addMetalink() RPC method and whose meta data could not
be saved as a file are not saved. Downloads removed using aria2.remove() and
aria2.forceRemove() will not be saved. GID is also saved with gid, but there are
some restrictions, see below.
NOTE:
Normally, GID of the download itself is saved. But some downloads use meta data
(e.g., BitTorrent and Metalink). In this case, there are some restrictions.
magnet URI, and followed by torrent download
GID of BitTorrent meta data download is saved.
URI to torrent file, and followed by torrent download
GID of torrent file download is saved.
URI to metalink file, and followed by file downloads described in metalink file
GID of metalink file download is saved.
local torrent file
GID of torrent download is saved.
local metalink file
Any meaningful GID is not saved.
--save-session-interval=<SEC>
Save error/unfinished downloads to a file specified by --save-session option every
SEC seconds. If 0 is given, file will be saved only when aria2 exits. Default: 0
--socket-recv-buffer-size=<SIZE>
Set the maximum socket receive buffer in bytes. Specifying 0 will disable this
option. This value will be set to socket file descriptor using SO_RCVBUF socket
option with setsockopt() call. Default: 0
--stop=<SEC>
Stop application after SEC seconds has passed. If 0 is given, this feature is
disabled. Default: 0
--stop-with-process=<PID>
Stop application when process PID is not running. This is useful if aria2 process
is forked from a parent process. The parent process can fork aria2 with its own pid
and when parent process exits for some reason, aria2 can detect it and shutdown
itself.
--truncate-console-readout [true|false]
Truncate console readout to fit in a single line. Default: true
-v, --version
Print the version number, copyright and the configuration information and exit.
Notes for Options
Optional arguments
The options that have its argument surrounded by square brackets([]) take an optional
argument. Usually omitting the argument is evaluated to true. If you use short form of
these options(such as -V) and give an argument, then the option name and its argument
should be concatenated(e.g. -Vfalse). If any spaces are inserted between the option name
and the argument, the argument will be treated as URI and usually this is not what you
expect.
Units (K and M)
Some options takes K and M to conveniently represent 1024 and 1048576 respectively. aria2
detects these characters in case-insensitive way. In other words, k and m can be used as
well as K and M respectively.
URI, MAGNET, TORRENT_FILE, METALINK_FILE
You can specify multiple URIs in command-line. Unless you specify --force-sequential
option, all URIs must point to the same file or downloading will fail.
You can specify arbitrary number of BitTorrent Magnet URI. Please note that they are
always treated as a separate download. Both hex encoded 40 characters Info Hash and
Base32 encoded 32 characters Info Hash are supported. The multiple tr parameters are
supported. Because BitTorrent Magnet URI is likely to contain & character, it is highly
recommended to always quote URI with single(') or double(") quotation. It is strongly
recommended to enable DHT especially when tr parameter is missing. See
http://www.bittorrent.org/beps/bep_0009.html for more details about BitTorrent Magnet URI.
You can also specify arbitrary number of torrent files and Metalink documents stored on a
local drive. Please note that they are always treated as a separate download. Both
Metalink4 and Metalink version 3.0 are supported.
You can specify both torrent file with -T option and URIs. By doing this, you can download
a file from both torrent swarm and HTTP(S)/FTP/SFTP server at the same time, while the
data from HTTP(S)/FTP/SFTP are uploaded to the torrent swarm. For single file torrents,
URI can be a complete URI pointing to the resource or if URI ends with /, name in torrent
file in torrent is added. For multi-file torrents, name and path are added to form a URI
for each file.
NOTE:
Make sure that URI is quoted with single(') or double(") quotation if it contains & or
any characters that have special meaning in shell.
Resuming Download
Usually, you can resume transfer by just issuing same command (aria2c URI) if the previous
transfer is made by aria2.
If the previous transfer is made by a browser or wget like sequential download manager,
then use --continue option to continue the transfer.
Event Hook
aria2 provides options to specify arbitrary command after specific event occurred.
Currently following options are available: --on-bt-download-complete, --on-download-pause,
--on-download-complete. --on-download-start, --on-download-error, --on-download-stop.
aria2 passes 3 arguments to specified command when it is executed. These arguments are:
GID, the number of files and file path. For HTTP, FTP, and SFTP downloads, usually the
number of files is 1. BitTorrent download can contain multiple files. If number of files
is more than one, file path is first one. In other words, this is the value of path key
of first struct whose selected key is true in the response of aria2.getFiles() RPC method.
If you want to get all file paths, consider to use JSON-RPC/XML-RPC. Please note that
file path may change during download in HTTP because of redirection or Content-Disposition
header.
Let's see an example of how arguments are passed to command:
$ cat hook.sh
#!/bin/sh
echo "Called with [$1] [$2] [$3]"
$ aria2c --on-download-complete hook.sh http://example.org/file.iso
Called with [1] [1] [/path/to/file.iso]
EXIT STATUS
Because aria2 can handle multiple downloads at once, it encounters lots of errors in a
session. aria2 returns the following exit status based on the last error encountered.
0 If all downloads were successful.
1 If an unknown error occurred.
2 If time out occurred.
3 If a resource was not found.
4 If aria2 saw the specified number of "resource not found" error. See
--max-file-not-found option.
5 If a download aborted because download speed was too slow. See
--lowest-speed-limit option.
6 If network problem occurred.
7 If there were unfinished downloads. This error is only reported if all finished
downloads were successful and there were unfinished downloads in a queue when aria2
exited by pressing Ctrl-C by an user or sending TERM or INT signal.
8 If remote server did not support resume when resume was required to complete
download.
9 If there was not enough disk space available.
10 If piece length was different from one in .aria2 control file. See
--allow-piece-length-change option.
11 If aria2 was downloading same file at that moment.
12 If aria2 was downloading same info hash torrent at that moment.
13 If file already existed. See --allow-overwrite option.
14 If renaming file failed. See --auto-file-renaming option.
15 If aria2 could not open existing file.
16 If aria2 could not create new file or truncate existing file.
17 If file I/O error occurred.
18 If aria2 could not create directory.
19 If name resolution failed.
20 If aria2 could not parse Metalink document.
21 If FTP command failed.
22 If HTTP response header was bad or unexpected.
23 If too many redirects occurred.
24 If HTTP authorization failed.
25 If aria2 could not parse bencoded file (usually ".torrent" file).
26 If ".torrent" file was corrupted or missing information that aria2 needed.
27 If Magnet URI was bad.
28 If bad/unrecognized option was given or unexpected option argument was given.
29 If the remote server was unable to handle the request due to a temporary
overloading or maintenance.
30 If aria2 could not parse JSON-RPC request.
31 Reserved. Not used.
32 If checksum validation failed.
NOTE:
An error occurred in a finished download will not be reported as exit status.
ENVIRONMENT
aria2 recognizes the following environment variables.
http_proxy [http://][USER:PASSWORD@]HOST[:PORT]
Specify proxy server for use in HTTP. Overrides http-proxy value in configuration
file. The command-line option --http-proxy overrides this value.
https_proxy [http://][USER:PASSWORD@]HOST[:PORT]
Specify proxy server for use in HTTPS. Overrides https-proxy value in
configuration file. The command-line option --https-proxy overrides this value.
ftp_proxy [http://][USER:PASSWORD@]HOST[:PORT]
Specify proxy server for use in FTP. Overrides ftp-proxy value in configuration
file. The command-line option --ftp-proxy overrides this value.
all_proxy [http://][USER:PASSWORD@]HOST[:PORT]
Specify proxy server for use if no protocol-specific proxy is specified. Overrides
all-proxy value in configuration file. The command-line option --all-proxy
overrides this value.
NOTE:
Although aria2 accepts ftp:// and https:// scheme in proxy URI, it simply assumes that
http:// is specified and does not change its behavior based on the specified scheme.
no_proxy [DOMAIN,...]
Specify a comma-separated list of host names, domains and network addresses with or
without a subnet mask where no proxy should be used. Overrides the no-proxy value
in configuration file. The command-line option --no-proxy overrides this value.
FILES
aria2.conf
By default, aria2 checks whether the legacy path $HOME/.aria2/aria2.conf is present,
otherwise it parses $XDG_CONFIG_HOME/aria2/aria2.conf as its configuration file. You can
specify the path to configuration file using --conf-path option. If you don't want to use
the configuration file, use --no-conf option.
The configuration file is a text file and has 1 option per each line. In each line, you
can specify name-value pair in the format: NAME=VALUE, where name is the long command-line
option name without -- prefix. You can use same syntax for the command-line option. The
lines beginning # are treated as comments:
# sample configuration file for aria2c
listen-port=60000
dht-listen-port=60000
seed-ratio=1.0
max-upload-limit=50K
ftp-pasv=true
NOTE:
The confidential information such as user/password might be included in the
configuration file. It is recommended to change file mode bits of the configuration
file (e.g., chmod 600 aria2.conf), so that other user cannot see the contents of the
file.
The environment variables, such as ${HOME}, are expanded by shell. This means that those
variables used in configuration file are not expanded. However, it is useful to ${HOME}
to refer user's home directory in configuration file to specify file paths. Therefore,
aria2 expands ${HOME} found in the following option values to user's home directory:
• ca-certificate
• certificate
• dht-file-path
• dht-file-path6
• dir
• input-file
• load-cookies
• log
• metalink-file
• netrc-path
• on-bt-download-complete
• on-download-complete
• on-download-error
• on-download-start
• on-download-stop
• on-download-pause
• out
• private-key
• rpc-certificate
• rpc-private-key
• save-cookies
• save-session
• server-stat-if
• server-stat-of
• torrent-file
Note that this expansion occurs even if the above options are used in the command-line.
This means that expansion may occur 2 times: first, shell and then aria2c.
dht.dat
Unless the legacy file paths $HOME/.aria2/dht.dat and $HOME/.aria2/dht6.dat are pointing
to existing files, the routing table of IPv4 DHT is saved to the path
$XDG_CACHE_HOME/aria2/dht.dat and the routing table of IPv6 DHT is saved to the path
$XDG_CACHE_HOME/aria2/dht6.dat.
Netrc
Netrc support is enabled by default for HTTP(S)/FTP/SFTP. To disable netrc support,
specify --no-netrc option. Your .netrc file should have correct permissions(600).
If machine name starts ., aria2 performs domain-match instead of exact match. This is an
extension of aria2. For example of domain match, imagine the following .netrc entry:
machine .example.org login myid password mypasswd
aria2.example.org domain-matches .example.org and uses myid and mypasswd.
Some domain-match example follow: example.net does not domain-match .example.org.
example.org does not domain-match .example.org because of preceding .. If you want to
match example.org, specify example.org.
Control File
aria2 uses a control file to track the progress of a download. A control file is placed
in the same directory as the downloading file and its file name is the file name of
downloading file with .aria2 appended. For example, if you are downloading file.zip, then
the control file should be file.zip.aria2. (There is a exception for this naming
convention. If you are downloading a multi torrent, its control file is the "top
directory" name of the torrent with .aria2 appended. The "top directory" name is a value
of "name" key in "info" directory in a torrent file.)
Usually a control file is deleted once download completed. If aria2 decides that download
cannot be resumed(for example, when downloading a file from a HTTP server which doesn't
support resume), a control file is not created.
Normally if you lose a control file, you cannot resume download. But if you have a
torrent or metalink with chunk checksums for the file, you can resume the download without
a control file by giving -V option to aria2c in command-line.
Input File
The input file can contain a list of URIs for aria2 to download. You can specify multiple
URIs for a single entity: separate URIs on a single line using the TAB character.
Each line is treated as if it is provided in command-line argument. Therefore they are
affected by --force-sequential and --parameterized-uri options.
Since URIs in the input file are directly read by aria2, they must not be quoted with
single(') or double(") quotation.
Lines starting with # are treated as comments and skipped.
Additionally, the following options can be specified after each line of URIs. These
optional lines must start with white space(s).
• all-proxy
• all-proxy-passwd
• all-proxy-user
• allow-overwrite
• allow-piece-length-change
• always-resume
• async-dns
• auto-file-renaming
• bt-enable-hook-after-hash-check
• bt-enable-lpd
• bt-exclude-tracker
• bt-external-ip
• bt-force-encryption
• bt-hash-check-seed
• bt-load-saved-metadata
• bt-max-peers
• bt-metadata-only
• bt-min-crypto-level
• bt-prioritize-piece
• bt-remove-unselected-file
• bt-request-peer-speed-limit
• bt-require-crypto
• bt-save-metadata
• bt-seed-unverified
• bt-stop-timeout
• bt-tracker
• bt-tracker-connect-timeout
• bt-tracker-interval
• bt-tracker-timeout
• check-integrity
• checksum
• conditional-get
• connect-timeout
• content-disposition-default-utf8
• continue
• dir
• dry-run
• enable-http-keep-alive
• enable-http-pipelining
• enable-mmap
• enable-peer-exchange
• file-allocation
• follow-metalink
• follow-torrent
• force-save
• ftp-passwd
• ftp-pasv
• ftp-proxy
• ftp-proxy-passwd
• ftp-proxy-user
• ftp-reuse-connection
• ftp-type
• ftp-user
• gid
• hash-check-only
• header
• http-accept-gzip
• http-auth-challenge
• http-no-cache
• http-passwd
• http-proxy
• http-proxy-passwd
• http-proxy-user
• http-user
• https-proxy
• https-proxy-passwd
• https-proxy-user
• index-out
• lowest-speed-limit
• max-connection-per-server
• max-download-limit
• max-file-not-found
• max-mmap-limit
• max-resume-failure-tries
• max-tries
• max-upload-limit
• metalink-base-uri
• metalink-enable-unique-protocol
• metalink-language
• metalink-location
• metalink-os
• metalink-preferred-protocol
• metalink-version
• min-split-size
• no-file-allocation-limit
• no-netrc
• no-proxy
• out
• parameterized-uri
• pause
• pause-metadata
• piece-length
• proxy-method
• realtime-chunk-checksum
• referer
• remote-time
• remove-control-file
• retry-wait
• reuse-uri
• rpc-save-upload-metadata
• seed-ratio
• seed-time
• select-file
• split
• ssh-host-key-md
• stream-piece-selector
• timeout
• uri-selector
• use-head
• user-agent
These options have exactly same meaning of the ones in the command-line options, but it
just applies to the URIs it belongs to. Please note that for options in input file --
prefix must be stripped.
For example, the content of uri.txt is:
http://server/file.iso http://mirror/file.iso
dir=/iso_images
out=file.img
http://foo/bar
If aria2 is executed with -i uri.txt -d /tmp options, then file.iso is saved as
/iso_images/file.img and it is downloaded from http://server/file.iso and
http://mirror/file.iso. The file bar is downloaded from http://foo/bar and saved as
/tmp/bar.
In some cases, out parameter has no effect. See note of --out option for the
restrictions.
Server Performance Profile
This section describes the format of server performance profile. The file is plain text
and each line has several NAME=VALUE pair, delimited by comma. Currently following NAMEs
are recognized:
host Host name of the server. Required.
protocol
Protocol for this profile, such as ftp, http. Required.
dl_speed
The average download speed observed in the previous download in bytes per sec.
Required.
sc_avg_speed
The average download speed observed in the previous download in bytes per sec. This
value is only updated if the download is done in single connection environment and
only used by AdaptiveURISelector. Optional.
mc_avg_speed
The average download speed observed in the previous download in bytes per sec. This
value is only updated if the download is done in multi connection environment and
only used by AdaptiveURISelector. Optional.
counter
How many times the server is used. Currently this value is only used by
AdaptiveURISelector. Optional.
last_updated
Last contact time in GMT with this server, specified in the seconds since the
Epoch(00:00:00 on January 1, 1970, UTC). Required.
status ERROR is set when server cannot be reached or out-of-service or timeout occurred.
Otherwise, OK is set.
Those fields must exist in one line. The order of the fields is not significant. You can
put pairs other than the above; they are simply ignored.
An example follows:
host=localhost, protocol=http, dl_speed=32000, last_updated=1222491640, status=OK
host=localhost, protocol=ftp, dl_speed=0, last_updated=1222491632, status=ERROR
RPC INTERFACE
aria2 provides JSON-RPC over HTTP and XML-RPC over HTTP interfaces that offer basically
the same functionality. aria2 also provides JSON-RPC over WebSocket. JSON-RPC over
WebSocket uses the same method signatures and response format as JSON-RPC over HTTP, but
additionally provides server-initiated notifications. See JSON-RPC over WebSocket section
for more information.
The request path of the JSON-RPC interface (for both over HTTP and over WebSocket) is
/jsonrpc. The request path of the XML-RPC interface is /rpc.
The WebSocket URI for JSON-RPC over WebSocket is ws://HOST:PORT/jsonrpc. If you enabled
SSL/TLS encryption, use wss://HOST:PORT/jsonrpc instead.
The implemented JSON-RPC is based on JSON-RPC 2.0 <http://jsonrpc.org/specification>, and
supports HTTP POST and GET (JSONP). The WebSocket transport is an aria2 extension.
The JSON-RPC interface does not support notifications over HTTP, but the RPC server will
send notifications over WebSocket. It also does not support floating point numbers. The
character encoding must be UTF-8.
When reading the following documentation for JSON-RPC, interpret structs as JSON objects.
Terminology
GID
The GID (or gid) is a key to manage each download. Each download will be assigned a
unique GID. The GID is stored as 64-bit binary value in aria2. For RPC access, it is
represented as a hex string of 16 characters (e.g., 2089b05ecca3d829). Normally, aria2
generates this GID for each download, but the user can specify GIDs manually using the
--gid option. When querying downloads by GID, you can specify only the prefix of a GID
as long as it is unique among others.
RPC authorization secret token
As of 1.18.4, in addition to HTTP basic authorization, aria2 provides RPC method-level
authorization. In a future release, HTTP basic authorization will be removed and RPC
method-level authorization will become mandatory.
To use RPC method-level authorization, the user has to specify an RPC secret authorization
token using the --rpc-secret option. For each RPC method call, the caller has to include
the token prefixed with token:. Even when the --rpc-secret option is not used, if the
first parameter in the RPC method is a string and starts with token:, it will removed from
the parameter list before the request is being processed.
For example, if the RPC secret authorization token is $$secret$$, calling aria2.addUri RPC
method would have to look like this:
aria2.addUri("token:$$secret$$", ["http://example.org/file"])
The system.multicall RPC method is treated specially. Since the XML-RPC specification only
allows a single array as a parameter for this method, we don't specify the token in the
call. Instead, each nested method call has to provide the token as the first parameter as
described above.
NOTE:
The secret token validation in aria2 is designed to take at least a certain amount of
time to mitigate brute-force/dictionary attacks against the RPC interface. Therefore it
is recommended to prefer Batch or system.multicall requests when appropriate.
system.listMethods and system.listNotifications can be executed without token. Since
they just return available methods/notifications, they do not alter anything, they're
safe without secret token.
Methods
All code examples are compatible with the Python 2.7 interpreter. For information on the
secret parameter, see RPC authorization secret token.
aria2.addUri([secret], uris[, options[, position]])
This method adds a new download. uris is an array of HTTP/FTP/SFTP/BitTorrent URIs
(strings) pointing to the same resource. If you mix URIs pointing to different
resources, then the download may fail or be corrupted without aria2 complaining.
When adding BitTorrent Magnet URIs, uris must have only one element and it should
be BitTorrent Magnet URI. options is a struct and its members are pairs of option
name and value. See Options below for more details. If position is given, it must
be an integer starting from 0. The new download will be inserted at position in the
waiting queue. If position is omitted or position is larger than the current size
of the queue, the new download is appended to the end of the queue. This method
returns the GID of the newly registered download.
JSON-RPC Example
The following example adds http://example.org/file:
>>> import urllib2, json
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.addUri',
... 'params':[['http://example.org/file']]})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> c.read()
'{"id":"qwer","jsonrpc":"2.0","result":"2089b05ecca3d829"}'
XML-RPC Example
The following example adds http://example.org/file:
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> s.aria2.addUri(['http://example.org/file'])
'2089b05ecca3d829'
The following example adds a new download with two sources and some options:
>>> s.aria2.addUri(['http://example.org/file', 'http://mirror/file'],
dict(dir="/tmp"))
'd2703803b52216d1'
The following example adds a download and inserts it to the front of the queue:
>>> s.aria2.addUri(['http://example.org/file'], {}, 0)
'ca3d829cee549a4d'
aria2.addTorrent([secret], torrent[, uris[, options[, position]]])
This method adds a BitTorrent download by uploading a ".torrent" file. If you want
to add a BitTorrent Magnet URI, use the aria2.addUri() method instead. torrent
must be a base64-encoded string containing the contents of the ".torrent" file.
uris is an array of URIs (string). uris is used for Web-seeding. For single file
torrents, the URI can be a complete URI pointing to the resource; if URI ends with
/, name in torrent file is added. For multi-file torrents, name and path in torrent
are added to form a URI for each file. options is a struct and its members are
pairs of option name and value. See Options below for more details. If position
is given, it must be an integer starting from 0. The new download will be inserted
at position in the waiting queue. If position is omitted or position is larger than
the current size of the queue, the new download is appended to the end of the
queue. This method returns the GID of the newly registered download. If
--rpc-save-upload-metadata is true, the uploaded data is saved as a file named as
the hex string of SHA-1 hash of data plus ".torrent" in the directory specified by
--dir option. E.g. a file name might be
0a3893293e27ac0490424c06de4d09242215f0a6.torrent. If a file with the same name
already exists, it is overwritten! If the file cannot be saved successfully or
--rpc-save-upload-metadata is false, the downloads added by this method are not
saved by --save-session.
The following examples add local file file.torrent.
JSON-RPC Example
>>> import urllib2, json, base64
>>> torrent = base64.b64encode(open('file.torrent').read())
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'asdf',
... 'method':'aria2.addTorrent', 'params':[torrent]})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> c.read()
'{"id":"asdf","jsonrpc":"2.0","result":"2089b05ecca3d829"}'
XML-RPC Example
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> s.aria2.addTorrent(xmlrpclib.Binary(open('file.torrent', mode='rb').read()))
'2089b05ecca3d829'
aria2.addMetalink([secret], metalink[, options[, position]])
This method adds a Metalink download by uploading a ".metalink" file. metalink is
a base64-encoded string which contains the contents of the ".metalink" file.
options is a struct and its members are pairs of option name and value. See
Options below for more details. If position is given, it must be an integer
starting from 0. The new download will be inserted at position in the waiting
queue. If position is omitted or position is larger than the current size of the
queue, the new download is appended to the end of the queue. This method returns
an array of GIDs of newly registered downloads. If --rpc-save-upload-metadata is
true, the uploaded data is saved as a file named hex string of SHA-1 hash of data
plus ".metalink" in the directory specified by --dir option. E.g. a file name
might be 0a3893293e27ac0490424c06de4d09242215f0a6.metalink. If a file with the
same name already exists, it is overwritten! If the file cannot be saved
successfully or --rpc-save-upload-metadata is false, the downloads added by this
method are not saved by --save-session.
The following examples add local file file.meta4.
JSON-RPC Example
>>> import urllib2, json, base64
>>> metalink = base64.b64encode(open('file.meta4').read())
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.addMetalink',
... 'params':[metalink]})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> c.read()
'{"id":"qwer","jsonrpc":"2.0","result":["2089b05ecca3d829"]}'
XML-RPC Example
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> s.aria2.addMetalink(xmlrpclib.Binary(open('file.meta4', mode='rb').read()))
['2089b05ecca3d829']
aria2.remove([secret], gid)
This method removes the download denoted by gid (string). If the specified
download is in progress, it is first stopped. The status of the removed download
becomes removed. This method returns GID of removed download.
The following examples remove a download with GID#2089b05ecca3d829.
JSON-RPC Example
>>> import urllib2, json
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.remove',
... 'params':['2089b05ecca3d829']})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> c.read()
'{"id":"qwer","jsonrpc":"2.0","result":"2089b05ecca3d829"}'
XML-RPC Example
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> s.aria2.remove('2089b05ecca3d829')
'2089b05ecca3d829'
aria2.forceRemove([secret], gid)
This method removes the download denoted by gid. This method behaves just like
aria2.remove() except that this method removes the download without performing any
actions which take time, such as contacting BitTorrent trackers to unregister the
download first.
aria2.pause([secret], gid)
This method pauses the download denoted by gid (string). The status of paused
download becomes paused. If the download was active, the download is placed in the
front of waiting queue. While the status is paused, the download is not started.
To change status to waiting, use the aria2.unpause() method. This method returns
GID of paused download.
aria2.pauseAll([secret])
This method is equal to calling aria2.pause() for every active/waiting download.
This methods returns OK.
aria2.forcePause([secret], gid)
This method pauses the download denoted by gid. This method behaves just like
aria2.pause() except that this method pauses downloads without performing any
actions which take time, such as contacting BitTorrent trackers to unregister the
download first.
aria2.forcePauseAll([secret])
This method is equal to calling aria2.forcePause() for every active/waiting
download. This methods returns OK.
aria2.unpause([secret], gid)
This method changes the status of the download denoted by gid (string) from paused
to waiting, making the download eligible to be restarted. This method returns the
GID of the unpaused download.
aria2.unpauseAll([secret])
This method is equal to calling aria2.unpause() for every paused download. This
methods returns OK.
aria2.tellStatus([secret], gid[, keys])
This method returns the progress of the download denoted by gid (string). keys is
an array of strings. If specified, the response contains only keys in the keys
array. If keys is empty or omitted, the response contains all keys. This is useful
when you just want specific keys and avoid unnecessary transfers. For example,
aria2.tellStatus("2089b05ecca3d829", ["gid", "status"]) returns the gid and status
keys only. The response is a struct and contains following keys. Values are
strings.
gid GID of the download.
status active for currently downloading/seeding downloads. waiting for downloads
in the queue; download is not started. paused for paused downloads. error
for downloads that were stopped because of error. complete for stopped and
completed downloads. removed for the downloads removed by user.
totalLength
Total length of the download in bytes.
completedLength
Completed length of the download in bytes.
uploadLength
Uploaded length of the download in bytes.
bitfield
Hexadecimal representation of the download progress. The highest bit
corresponds to the piece at index 0. Any set bits indicate loaded pieces,
while unset bits indicate not yet loaded and/or missing pieces. Any overflow
bits at the end are set to zero. When the download was not started yet,
this key will not be included in the response.
downloadSpeed
Download speed of this download measured in bytes/sec.
uploadSpeed
Upload speed of this download measured in bytes/sec.
infoHash
InfoHash. BitTorrent only.
numSeeders
The number of seeders aria2 has connected to. BitTorrent only.
seeder true if the local endpoint is a seeder. Otherwise false. BitTorrent only.
pieceLength
Piece length in bytes.
numPieces
The number of pieces.
connections
The number of peers/servers aria2 has connected to.
errorCode
The code of the last error for this item, if any. The value is a string. The
error codes are defined in the EXIT STATUS section. This value is only
available for stopped/completed downloads.
errorMessage
The (hopefully) human readable error message associated to errorCode.
followedBy
List of GIDs which are generated as the result of this download. For
example, when aria2 downloads a Metalink file, it generates downloads
described in the Metalink (see the --follow-metalink option). This value is
useful to track auto-generated downloads. If there are no such downloads,
this key will not be included in the response.
following
The reverse link for followedBy. A download included in followedBy has this
object's GID in its following value.
belongsTo
GID of a parent download. Some downloads are a part of another download.
For example, if a file in a Metalink has BitTorrent resources, the downloads
of ".torrent" files are parts of that parent. If this download has no
parent, this key will not be included in the response.
dir Directory to save files.
files Returns the list of files. The elements of this list are the same structs
used in aria2.getFiles() method.
bittorrent
Struct which contains information retrieved from the .torrent (file).
BitTorrent only. It contains following keys.
announceList
List of lists of announce URIs. If the torrent contains announce and
no announce-list, announce is converted to the announce-list format.
comment
The comment of the torrent. comment.utf-8 is used if available.
creationDate
The creation time of the torrent. The value is an integer since the
epoch, measured in seconds.
mode File mode of the torrent. The value is either single or multi.
info Struct which contains data from Info dictionary. It contains
following keys.
name name in info dictionary. name.utf-8 is used if available.
verifiedLength
The number of verified number of bytes while the files are being hash
checked. This key exists only when this download is being hash checked.
verifyIntegrityPending
true if this download is waiting for the hash check in a queue. This key
exists only when this download is in the queue.
JSON-RPC Example
The following example gets information about a download with GID#2089b05ecca3d829:
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.tellStatus',
... 'params':['2089b05ecca3d829']})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': {u'bitfield': u'0000000000',
u'completedLength': u'901120',
u'connections': u'1',
u'dir': u'/downloads',
u'downloadSpeed': u'15158',
u'files': [{u'index': u'1',
u'length': u'34896138',
u'completedLength': u'34896138',
u'path': u'/downloads/file',
u'selected': u'true',
u'uris': [{u'status': u'used',
u'uri': u'http://example.org/file'}]}],
u'gid': u'2089b05ecca3d829',
u'numPieces': u'34',
u'pieceLength': u'1048576',
u'status': u'active',
u'totalLength': u'34896138',
u'uploadLength': u'0',
u'uploadSpeed': u'0'}}
The following example gets only specific keys:
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.tellStatus',
... 'params':['2089b05ecca3d829',
... ['gid',
... 'totalLength',
... 'completedLength']]})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': {u'completedLength': u'5701632',
u'gid': u'2089b05ecca3d829',
u'totalLength': u'34896138'}}
XML-RPC Example
The following example gets information about a download with GID#2089b05ecca3d829:
>>> import xmlrpclib
>>> from pprint import pprint
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> r = s.aria2.tellStatus('2089b05ecca3d829')
>>> pprint(r)
{'bitfield': 'ffff80',
'completedLength': '34896138',
'connections': '0',
'dir': '/downloads',
'downloadSpeed': '0',
'errorCode': '0',
'files': [{'index': '1',
'length': '34896138',
'completedLength': '34896138',
'path': '/downloads/file',
'selected': 'true',
'uris': [{'status': 'used',
'uri': 'http://example.org/file'}]}],
'gid': '2089b05ecca3d829',
'numPieces': '17',
'pieceLength': '2097152',
'status': 'complete',
'totalLength': '34896138',
'uploadLength': '0',
'uploadSpeed': '0'}
The following example gets only specific keys:
>>> r = s.aria2.tellStatus('2089b05ecca3d829', ['gid', 'totalLength', 'completedLength'])
>>> pprint(r)
{'completedLength': '34896138', 'gid': '2089b05ecca3d829', 'totalLength': '34896138'}
aria2.getUris([secret], gid)
This method returns the URIs used in the download denoted by gid (string). The
response is an array of structs and it contains following keys. Values are string.
uri URI
status 'used' if the URI is in use. 'waiting' if the URI is still waiting in the
queue.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.getUris',
... 'params':['2089b05ecca3d829']})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': [{u'status': u'used',
u'uri': u'http://example.org/file'}]}
XML-RPC Example
>>> import xmlrpclib
>>> from pprint import pprint
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> r = s.aria2.getUris('2089b05ecca3d829')
>>> pprint(r)
[{'status': 'used', 'uri': 'http://example.org/file'}]
aria2.getFiles([secret], gid)
This method returns the file list of the download denoted by gid (string). The
response is an array of structs which contain following keys. Values are strings.
index Index of the file, starting at 1, in the same order as files appear in the
multi-file torrent.
path File path.
length File size in bytes.
completedLength
Completed length of this file in bytes. Please note that it is possible
that sum of completedLength is less than the completedLength returned by the
aria2.tellStatus() method. This is because completedLength in
aria2.getFiles() only includes completed pieces. On the other hand,
completedLength in aria2.tellStatus() also includes partially completed
pieces.
selected
true if this file is selected by --select-file option. If --select-file is
not specified or this is single-file torrent or not a torrent download at
all, this value is always true. Otherwise false.
uris Returns a list of URIs for this file. The element type is the same struct
used in the aria2.getUris() method.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.getFiles',
... 'params':['2089b05ecca3d829']})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': [{u'index': u'1',
u'length': u'34896138',
u'completedLength': u'34896138',
u'path': u'/downloads/file',
u'selected': u'true',
u'uris': [{u'status': u'used',
u'uri': u'http://example.org/file'}]}]}
XML-RPC Example
>>> import xmlrpclib
>>> from pprint import pprint
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> r = s.aria2.getFiles('2089b05ecca3d829')
>>> pprint(r)
[{'index': '1',
'length': '34896138',
'completedLength': '34896138',
'path': '/downloads/file',
'selected': 'true',
'uris': [{'status': 'used',
'uri': 'http://example.org/file'}]}]
aria2.getPeers([secret], gid)
This method returns a list peers of the download denoted by gid (string). This
method is for BitTorrent only. The response is an array of structs and contains
the following keys. Values are strings.
peerId Percent-encoded peer ID.
ip IP address of the peer.
port Port number of the peer.
bitfield
Hexadecimal representation of the download progress of the peer. The highest
bit corresponds to the piece at index 0. Set bits indicate the piece is
available and unset bits indicate the piece is missing. Any spare bits at
the end are set to zero.
amChoking
true if aria2 is choking the peer. Otherwise false.
peerChoking
true if the peer is choking aria2. Otherwise false.
downloadSpeed
Download speed (byte/sec) that this client obtains from the peer.
uploadSpeed
Upload speed(byte/sec) that this client uploads to the peer.
seeder true if this peer is a seeder. Otherwise false.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.getPeers',
... 'params':['2089b05ecca3d829']})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': [{u'amChoking': u'true',
u'bitfield': u'ffffffffffffffffffffffffffffffffffffffff',
u'downloadSpeed': u'10602',
u'ip': u'10.0.0.9',
u'peerChoking': u'false',
u'peerId': u'aria2%2F1%2E10%2E5%2D%87%2A%EDz%2F%F7%E6',
u'port': u'6881',
u'seeder': u'true',
u'uploadSpeed': u'0'},
{u'amChoking': u'false',
u'bitfield': u'ffffeff0fffffffbfffffff9fffffcfff7f4ffff',
u'downloadSpeed': u'8654',
u'ip': u'10.0.0.30',
u'peerChoking': u'false',
u'peerId': u'bittorrent client758',
u'port': u'37842',
u'seeder': u'false',
u'uploadSpeed': u'6890'}]}
XML-RPC Example
>>> import xmlrpclib
>>> from pprint import pprint
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> r = s.aria2.getPeers('2089b05ecca3d829')
>>> pprint(r)
[{'amChoking': 'true',
'bitfield': 'ffffffffffffffffffffffffffffffffffffffff',
'downloadSpeed': '10602',
'ip': '10.0.0.9',
'peerChoking': 'false',
'peerId': 'aria2%2F1%2E10%2E5%2D%87%2A%EDz%2F%F7%E6',
'port': '6881',
'seeder': 'true',
'uploadSpeed': '0'},
{'amChoking': 'false',
'bitfield': 'ffffeff0fffffffbfffffff9fffffcfff7f4ffff',
'downloadSpeed': '8654',
'ip': '10.0.0.30',
'peerChoking': 'false',
'peerId': 'bittorrent client758',
'port': '37842',
'seeder': 'false,
'uploadSpeed': '6890'}]
aria2.getServers([secret], gid)
This method returns currently connected HTTP(S)/FTP/SFTP servers of the download
denoted by gid (string). The response is an array of structs and contains the
following keys. Values are strings.
index Index of the file, starting at 1, in the same order as files appear in the
multi-file metalink.
servers
A list of structs which contain the following keys.
uri Original URI.
currentUri
This is the URI currently used for downloading. If redirection is
involved, currentUri and uri may differ.
downloadSpeed
Download speed (byte/sec)
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.getServers',
... 'params':['2089b05ecca3d829']})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': [{u'index': u'1',
u'servers': [{u'currentUri': u'http://example.org/file',
u'downloadSpeed': u'10467',
u'uri': u'http://example.org/file'}]}]}
XML-RPC Example
>>> import xmlrpclib
>>> from pprint import pprint
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> r = s.aria2.getServers('2089b05ecca3d829')
>>> pprint(r)
[{'index': '1',
'servers': [{'currentUri': 'http://example.org/dl/file',
'downloadSpeed': '20285',
'uri': 'http://example.org/file'}]}]
aria2.tellActive([secret][, keys])
This method returns a list of active downloads. The response is an array of the
same structs as returned by the aria2.tellStatus() method. For the keys parameter,
please refer to the aria2.tellStatus() method.
aria2.tellWaiting([secret], offset, num[, keys])
This method returns a list of waiting downloads, including paused ones. offset is
an integer and specifies the offset from the download waiting at the front. num is
an integer and specifies the max. number of downloads to be returned. For the keys
parameter, please refer to the aria2.tellStatus() method.
If offset is a positive integer, this method returns downloads in the range of
[offset, offset + num).
offset can be a negative integer. offset == -1 points last download in the waiting
queue and offset == -2 points the download before the last download, and so on.
Downloads in the response are in reversed order then.
For example, imagine three downloads "A","B" and "C" are waiting in this order.
aria2.tellWaiting(0, 1) returns ["A"]. aria2.tellWaiting(1, 2) returns ["B", "C"].
aria2.tellWaiting(-1, 2) returns ["C", "B"].
The response is an array of the same structs as returned by aria2.tellStatus()
method.
aria2.tellStopped([secret], offset, num[, keys])
This method returns a list of stopped downloads. offset is an integer and
specifies the offset from the least recently stopped download. num is an integer
and specifies the max. number of downloads to be returned. For the keys parameter,
please refer to the aria2.tellStatus() method.
offset and num have the same semantics as described in the aria2.tellWaiting()
method.
The response is an array of the same structs as returned by the aria2.tellStatus()
method.
aria2.changePosition([secret], gid, pos, how)
This method changes the position of the download denoted by gid in the queue. pos
is an integer. how is a string. If how is POS_SET, it moves the download to a
position relative to the beginning of the queue. If how is POS_CUR, it moves the
download to a position relative to the current position. If how is POS_END, it
moves the download to a position relative to the end of the queue. If the
destination position is less than 0 or beyond the end of the queue, it moves the
download to the beginning or the end of the queue respectively. The response is an
integer denoting the resulting position.
For example, if GID#2089b05ecca3d829 is currently in position 3,
aria2.changePosition('2089b05ecca3d829', -1, 'POS_CUR') will change its position to
2. Additionally aria2.changePosition('2089b05ecca3d829', 0, 'POS_SET') will change
its position to 0 (the beginning of the queue).
The following examples move the download GID#2089b05ecca3d829 to the front of the
queue.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.changePosition',
... 'params':['2089b05ecca3d829', 0, 'POS_SET']})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer', u'jsonrpc': u'2.0', u'result': 0}
XML-RPC Example
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> s.aria2.changePosition('2089b05ecca3d829', 0, 'POS_SET')
0
aria2.changeUri([secret], gid, fileIndex, delUris, addUris[, position])
This method removes the URIs in delUris from and appends the URIs in addUris to
download denoted by gid. delUris and addUris are lists of strings. A download can
contain multiple files and URIs are attached to each file. fileIndex is used to
select which file to remove/attach given URIs. fileIndex is 1-based. position is
used to specify where URIs are inserted in the existing waiting URI list. position
is 0-based. When position is omitted, URIs are appended to the back of the list.
This method first executes the removal and then the addition. position is the
position after URIs are removed, not the position when this method is called. When
removing an URI, if the same URIs exist in download, only one of them is removed
for each URI in delUris. In other words, if there are three URIs
http://example.org/aria2 and you want remove them all, you have to specify (at
least) 3 http://example.org/aria2 in delUris. This method returns a list which
contains two integers. The first integer is the number of URIs deleted. The second
integer is the number of URIs added.
The following examples add the URI http://example.org/file to the file whose index
is 1 and belongs to the download GID#2089b05ecca3d829.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.changeUri',
... 'params':['2089b05ecca3d829', 1, [],
['http://example.org/file']]})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer', u'jsonrpc': u'2.0', u'result': [0, 1]}
XML-RPC Example
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> s.aria2.changeUri('2089b05ecca3d829', 1, [],
['http://example.org/file'])
[0, 1]
aria2.getOption([secret], gid)
This method returns options of the download denoted by gid. The response is a
struct where keys are the names of options. The values are strings. Note that
this method does not return options which have no default value and have not been
set on the command-line, in configuration files or RPC methods.
The following examples get options of the download GID#2089b05ecca3d829.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.getOption',
... 'params':['2089b05ecca3d829']})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': {u'allow-overwrite': u'false',
u'allow-piece-length-change': u'false',
u'always-resume': u'true',
u'async-dns': u'true',
...
XML-RPC Example
>>> import xmlrpclib
>>> from pprint import pprint
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> r = s.aria2.getOption('2089b05ecca3d829')
>>> pprint(r)
{'allow-overwrite': 'false',
'allow-piece-length-change': 'false',
'always-resume': 'true',
'async-dns': 'true',
....
aria2.changeOption([secret], gid, options)
This method changes options of the download denoted by gid (string) dynamically.
options is a struct. The options listed in Input File subsection are available,
except for following options:
• dry-run
• metalink-base-uri
• parameterized-uri
• pause
• piece-length
• rpc-save-upload-metadata
Except for the following options, changing the other options of active download
makes it restart (restart itself is managed by aria2, and no user intervention is
required):
• bt-max-peers
• bt-request-peer-speed-limit
• bt-remove-unselected-file
• force-save
• max-download-limit
• max-upload-limit
This method returns OK for success.
The following examples set the max-download-limit option to 20K for the download
GID#2089b05ecca3d829.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.changeOption',
... 'params':['2089b05ecca3d829',
... {'max-download-limit':'10K'}]})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer', u'jsonrpc': u'2.0', u'result': u'OK'}
XML-RPC Example
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> s.aria2.changeOption('2089b05ecca3d829', {'max-download-limit':'20K'})
'OK'
aria2.getGlobalOption([secret])
This method returns the global options. The response is a struct. Its keys are the
names of options. Values are strings. Note that this method does not return
options which have no default value and have not been set on the command-line, in
configuration files or RPC methods. Because global options are used as a template
for the options of newly added downloads, the response contains keys returned by
the aria2.getOption() method.
aria2.changeGlobalOption([secret], options)
This method changes global options dynamically. options is a struct. The
following options are available:
• bt-max-open-files
• download-result
• keep-unfinished-download-result
• log
• log-level
• max-concurrent-downloads
• max-download-result
• max-overall-download-limit
• max-overall-upload-limit
• optimize-concurrent-downloads
• save-cookies
• save-session
• server-stat-of
In addition, options listed in the Input File subsection are available, except for
following options: checksum, index-out, out, pause and select-file.
With the log option, you can dynamically start logging or change log file. To stop
logging, specify an empty string("") as the parameter value. Note that log file is
always opened in append mode. This method returns OK for success.
aria2.getGlobalStat([secret])
This method returns global statistics such as the overall download and upload
speeds. The response is a struct and contains the following keys. Values are
strings.
downloadSpeed
Overall download speed (byte/sec).
uploadSpeed
Overall upload speed(byte/sec).
numActive
The number of active downloads.
numWaiting
The number of waiting downloads.
numStopped
The number of stopped downloads in the current session. This value is capped
by the --max-download-result option.
numStoppedTotal
The number of stopped downloads in the current session and not capped by the
--max-download-result option.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.getGlobalStat'})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': {u'downloadSpeed': u'21846',
u'numActive': u'2',
u'numStopped': u'0',
u'numWaiting': u'0',
u'uploadSpeed': u'0'}}
XML-RPC Example
>>> import xmlrpclib
>>> from pprint import pprint
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> r = s.aria2.getGlobalStat()
>>> pprint(r)
{'downloadSpeed': '23136',
'numActive': '2',
'numStopped': '0',
'numWaiting': '0',
'uploadSpeed': '0'}
aria2.purgeDownloadResult([secret])
This method purges completed/error/removed downloads to free memory. This method
returns OK.
aria2.removeDownloadResult([secret], gid)
This method removes a completed/error/removed download denoted by gid from memory.
This method returns OK for success.
The following examples remove the download result of the download
GID#2089b05ecca3d829.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.removeDownloadResult',
... 'params':['2089b05ecca3d829']})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer', u'jsonrpc': u'2.0', u'result': u'OK'}
XML-RPC Example
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> s.aria2.removeDownloadResult('2089b05ecca3d829')
'OK'
aria2.getVersion([secret])
This method returns the version of aria2 and the list of enabled features. The
response is a struct and contains following keys.
version
Version number of aria2 as a string.
enabledFeatures
List of enabled features. Each feature is given as a string.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.getVersion'})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': {u'enabledFeatures': [u'Async DNS',
u'BitTorrent',
u'Firefox3 Cookie',
u'GZip',
u'HTTPS',
u'Message Digest',
u'Metalink',
u'XML-RPC'],
u'version': u'1.11.0'}}
XML-RPC Example
>>> import xmlrpclib
>>> from pprint import pprint
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> r = s.aria2.getVersion()
>>> pprint(r)
{'enabledFeatures': ['Async DNS',
'BitTorrent',
'Firefox3 Cookie',
'GZip',
'HTTPS',
'Message Digest',
'Metalink',
'XML-RPC'],
'version': '1.11.0'}
aria2.getSessionInfo([secret])
This method returns session information. The response is a struct and contains
following key.
sessionId
Session ID, which is generated each time when aria2 is invoked.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.getSessionInfo'})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': {u'sessionId': u'cd6a3bc6a1de28eb5bfa181e5f6b916d44af31a9'}}
XML-RPC Example
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> s.aria2.getSessionInfo()
{'sessionId': 'cd6a3bc6a1de28eb5bfa181e5f6b916d44af31a9'}
aria2.shutdown([secret])
This method shuts down aria2. This method returns OK.
aria2.forceShutdown([secret])
This method shuts down aria2(). This method behaves like :func:'aria2.shutdown`
without performing any actions which take time, such as contacting BitTorrent
trackers to unregister downloads first. This method returns OK.
aria2.saveSession([secret])
This method saves the current session to a file specified by the --save-session
option. This method returns OK if it succeeds.
system.multicall(methods)
This methods encapsulates multiple method calls in a single request. methods is an
array of structs. The structs contain two keys: methodName and params. methodName
is the method name to call and params is array containing parameters to the method
call. This method returns an array of responses. The elements will be either a
one-item array containing the return value of the method call or a struct of fault
element if an encapsulated method call fails.
In the following examples, we add 2 downloads. The first one is
http://example.org/file and the second one is file.torrent.
JSON-RPC Example
>>> import urllib2, json, base64
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'system.multicall',
... 'params':[[{'methodName':'aria2.addUri',
... 'params':[['http://example.org']]},
... {'methodName':'aria2.addTorrent',
... 'params':[base64.b64encode(open('file.torrent').read())]}]]})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer', u'jsonrpc': u'2.0', u'result': [[u'2089b05ecca3d829'], [u'd2703803b52216d1']]}
JSON-RPC additionally supports Batch requests as described in the JSON-RPC 2.0
Specification:
>>> jsonreq = json.dumps([{'jsonrpc':'2.0', 'id':'qwer',
... 'method':'aria2.addUri',
... 'params':[['http://example.org']]},
... {'jsonrpc':'2.0', 'id':'asdf',
... 'method':'aria2.addTorrent',
... 'params':[base64.b64encode(open('file.torrent').read())]}])
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
[{u'id': u'qwer', u'jsonrpc': u'2.0', u'result': u'2089b05ecca3d829'},
{u'id': u'asdf', u'jsonrpc': u'2.0', u'result': u'd2703803b52216d1'}]
XML-RPC Example
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> mc = xmlrpclib.MultiCall(s)
>>> mc.aria2.addUri(['http://example.org/file'])
>>> mc.aria2.addTorrent(xmlrpclib.Binary(open('file.torrent', mode='rb').read()))
>>> r = mc()
>>> tuple(r)
('2089b05ecca3d829', 'd2703803b52216d1')
system.listMethods()
This method returns all the available RPC methods in an array of string. Unlike
other methods, this method does not require secret token. This is safe because
this method just returns the available method names.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'system.listMethods'})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': [u'aria2.addUri',
u'aria2.addTorrent',
...
XML-RPC Example
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> s.system.listMethods()
['aria2.addUri', 'aria2.addTorrent', ...
system.listNotifications()
This method returns all the available RPC notifications in an array of string.
Unlike other methods, this method does not require secret token. This is safe
because this method just returns the available notifications names.
JSON-RPC Example
>>> import urllib2, json
>>> from pprint import pprint
>>> jsonreq = json.dumps({'jsonrpc':'2.0', 'id':'qwer',
... 'method':'system.listNotifications'})
>>> c = urllib2.urlopen('http://localhost:6800/jsonrpc', jsonreq)
>>> pprint(json.loads(c.read()))
{u'id': u'qwer',
u'jsonrpc': u'2.0',
u'result': [u'aria2.onDownloadStart',
u'aria2.onDownloadPause',
...
XML-RPC Example
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> s.system.listNotifications()
['aria2.onDownloadStart', 'aria2.onDownloadPause', ...
Error Handling
Over JSON-RPC, aria2 returns a JSON object which contains an error code in code and the
error message in message.
Over XML-RPC, aria2 returns faultCode=1 and the error message in faultString.
Options
The same options as for --input-file are available. See the Input File subsection for a
complete list of options.
In the option struct, the name element is the option name (without the preceding --) and
the value element is the argument as a string.
JSON-RPC Example
{'split':'1', 'http-proxy':'http://proxy/'}
XML-RPC Example
<struct>
<member>
<name>split</name>
<value><string>1</string></value>
</member>
<member>
<name>http-proxy</name>
<value><string>http://proxy/</string></value>
</member>
</struct>
The header and index-out options are allowed multiple times on the command-line. Since the
name should be unique in a struct (many XML-RPC library implementations use a hash or dict
for struct), a single string is not enough. To overcome this limitation, you may use an
array as the value as well as a string.
JSON-RPC Example
{'header':['Accept-Language: ja', 'Accept-Charset: utf-8']}
XML-RPC Example
<struct>
<member>
<name>header</name>
<value>
<array>
<data>
<value><string>Accept-Language: ja</string></value>
<value><string>Accept-Charset: utf-8</string></value>
</data>
</array>
</value>
</member>
</struct>
The following example adds a download with two options: dir and header. The header option
requires two values, so it uses a list:
>>> import xmlrpclib
>>> s = xmlrpclib.ServerProxy('http://localhost:6800/rpc')
>>> opts = dict(dir='/tmp',
... header=['Accept-Language: ja',
... 'Accept-Charset: utf-8'])
>>> s.aria2.addUri(['http://example.org/file'], opts)
'1'
JSON-RPC using HTTP GET
The JSON-RPC interface also supports requests via HTTP GET. The encoding scheme in GET
parameters is based on JSON-RPC over HTTP Specification [2008-1-15(RC1)]. The encoding of
GET parameters are follows:
/jsonrpc?method=METHOD_NAME&id=ID¶ms=BASE64_ENCODED_PARAMS
The method and id are always treated as JSON string and their encoding must be UTF-8.
For example, The encoded string of aria2.tellStatus('2089b05ecca3d829') with id='foo'
looks like this:
/jsonrpc?method=aria2.tellStatus&id=foo¶ms=WyIyMDg5YjA1ZWNjYTNkODI5Il0%3D
The params parameter is Base64-encoded JSON array which usually appears in params
attribute in JSON-RPC request object. In the above example, the params is
["2089b05ecca3d829"], therefore:
["2089b05ecca3d829"] --(Base64)--> WyIyMDg5YjA1ZWNjYTNkODI5Il0=
--(Percent Encode)--> WyIyMDg5YjA1ZWNjYTNkODI5Il0%3D
The JSON-RPC interface also supports JSONP. You can specify the callback function in the
jsoncallback parameter:
/jsonrpc?method=aria2.tellStatus&id=foo¶ms=WyIyMDg5YjA1ZWNjYTNkODI5Il0%3D&jsoncallback=cb
For Batch requests, the method and id parameters must not be specified. The whole request
must be specified in the params parameter. For example, a Batch request:
[{'jsonrpc':'2.0', 'id':'qwer', 'method':'aria2.getVersion'},
{'jsonrpc':'2.0', 'id':'asdf', 'method':'aria2.tellActive'}]
must be encoded like this:
/jsonrpc?params=W3sianNvbnJwYyI6ICIyLjAiLCAiaWQiOiAicXdlciIsICJtZXRob2QiOiAiYXJpYTIuZ2V0VmVyc2lvbiJ9LCB7Impzb25ycGMiOiAiMi4wIiwgImlkIjogImFzZGYiLCAibWV0aG9kIjogImFyaWEyLnRlbGxBY3RpdmUifV0%3D
JSON-RPC over WebSocket
JSON-RPC over WebSocket uses same method signatures and response format as JSON-RPC over
HTTP. The supported WebSocket version is 13 which is detailed in RFC 6455.
To send a RPC request to the RPC server, send a serialized JSON string in a Text frame.
The response from the RPC server is delivered also in a Text frame.
Notifications
The RPC server might send notifications to the client. Notifications is unidirectional,
therefore the client which receives the notification must not respond to it. The method
signature of a notification is much like a normal method request but lacks the id key. The
value of the params key is the data which this notification carries. The format of the
value varies depending on the notification method. Following notification methods are
defined.
aria2.onDownloadStart(event)
This notification will be sent when a download is started. The event is of type
struct and it contains following keys. The value type is string.
gid GID of the download.
aria2.onDownloadPause(event)
This notification will be sent when a download is paused. The event is the same
struct as the event argument of aria2.onDownloadStart() method.
aria2.onDownloadStop(event)
This notification will be sent when a download is stopped by the user. The event
is the same struct as the event argument of aria2.onDownloadStart() method.
aria2.onDownloadComplete(event)
This notification will be sent when a download is complete. For BitTorrent
downloads, this notification is sent when the download is complete and seeding is
over. The event is the same struct of the event argument of aria2.onDownloadStart()
method.
aria2.onDownloadError(event)
This notification will be sent when a download is stopped due to an error. The
event is the same struct as the event argument of aria2.onDownloadStart() method.
aria2.onBtDownloadComplete(event)
This notification will be sent when a torrent download is complete but seeding is
still going on. The event is the same struct as the event argument of
aria2.onDownloadStart() method.
Sample XML-RPC Client Code
The following Ruby script adds http://localhost/aria2.tar.bz2 to aria2c (running on
localhost) with option --dir=/downloads and prints the RPC response:
#!/usr/bin/env ruby
require 'xmlrpc/client'
require 'pp'
client=XMLRPC::Client.new2("http://localhost:6800/rpc")
options={ "dir" => "/downloads" }
result=client.call("aria2.addUri", [ "http://localhost/aria2.tar.bz2" ], options)
pp result
If you are a Python lover, you can use xmlrpclib (Python3 uses xmlrpc.client instead) to
interact with aria2:
import xmlrpclib
from pprint import pprint
s = xmlrpclib.ServerProxy("http://localhost:6800/rpc")
r = s.aria2.addUri(["http://localhost/aria2.tar.bz2"], {"dir":"/downloads"})
pprint(r)
MISC
Console Readout
While downloading files, aria2 prints a readout to the console to show the progress of the
downloads. The console readout looks like this:
[#2089b0 400.0KiB/33.2MiB(1%) CN:1 DL:115.7KiB ETA:4m51s]
This section describes what these numbers and strings mean.
#NNNNNN
The first 6 characters of the GID as a hex string. The GID is an unique ID for each
download, internal to aria2. The GID is particularly useful when interacting with
aria2 using the RPC interface.
X/Y(Z%)
Completed length, the total file length and its progress. If --select-file is used,
this is the sum of selected files.
SEED Share ratio when the aria2 is seeding a finished torrent.
CN The number of connections aria2 has established.
SD The number of seeders aria2 is connected to.
DL Download speed (bytes per second).
UL Upload speed (bytes per second) and the number of uploaded bytes.
ETA Expected time to finish the download.
When more than one download is in progress, some of the information described above will
be omitted in order to show information for several downloads. And the overall download
and upload speeds are shown at the beginning of the line.
When aria2 is allocating file space or validating checksums, it additionally prints the
progress of these operations:
FileAlloc
GID, already allocated length and total length in bytes.
Checksum
GID, already validated length and total length in bytes.
EXAMPLE
HTTP/FTP Segmented Downloads
Download a file
$ aria2c "http://host/file.zip"
NOTE:
To stop a download, press Ctrl-C. You can resume the transfer by running aria2c with
the same argument in the same directory. You can change URIs as long as they are
pointing to the same file.
Download a file from two different HTTP servers
$ aria2c "http://host/file.zip" "http://mirror/file.zip"
Download a file from one host using multiple connections
$ aria2c -x2 -k1M "http://host/file.zip"
NOTE:
The -x option specified the number of allowed connections, while the -k option
specified the size of chunks.
Download a file from HTTP and FTP servers at the same time
$ aria2c "http://host1/file.zip" "ftp://host2/file.zip"
Download files listed in a text file concurrently
$ aria2c -ifiles.txt -j2
NOTE:
-j option specifies the number of parallel downloads.
Using a proxy
For HTTP:
$ aria2c --http-proxy="http://proxy:8080" "http://host/file"
$ aria2c --http-proxy="http://proxy:8080" --no-proxy="localhost,127.0.0.1,192.168.0.0/16" "http://host/file"
For FTP:
$ aria2c --ftp-proxy="http://proxy:8080" "ftp://host/file"
NOTE:
See --http-proxy, --https-proxy, --ftp-proxy, --all-proxy and --no-proxy for details.
You can specify proxy in the environment variables. See ENVIRONMENT section.
Using a Proxy with authorization
$ aria2c --http-proxy="http://username:password@proxy:8080" "http://host/file"
$ aria2c --http-proxy="http://proxy:8080" --http-proxy-user="username" --http-proxy-passwd="password" "http://host/file"
Metalink Download
Download files with remote Metalink
$ aria2c --follow-metalink=mem "http://host/file.metalink"
Download using a local metalink file
$ aria2c -p --lowest-speed-limit=4000 file.metalink
NOTE:
To stop a download, press Ctrl-C. You can resume the transfer by running aria2c with
the same argument in the same directory.
Download several local metalink files
$ aria2c -j2 file1.metalink file2.metalink
Download only selected files
$ aria2c --select-file=1-4,8 file.metalink
NOTE:
The index is printed to the console using -S option.
Download a file using a local metalink file with user preference
$ aria2c --metalink-location=jp,us --metalink-version=1.1 --metalink-language=en-US file.metalink
BitTorrent Download
Download files using a remote BitTorrent file
$ aria2c --follow-torrent=mem "http://host/file.torrent"
Download using a local torrent file
$ aria2c --max-upload-limit=40K file.torrent
NOTE:
--max-upload-limit specifies the max of upload rate.
NOTE:
To stop a download, press Ctrl-C. You can resume the transfer later by running aria2c
with the same argument in the same directory.
Download using BitTorrent Magnet URI
$ aria2c "magnet:?xt=urn:btih:248D0A1CD08284299DE78D5C1ED359BB46717D8C&dn=aria2"
NOTE:
Don't forget to quote BitTorrent Magnet URIs which include & characters with single(')
or double(") quotes when specifying URIs on the command-line.
Download 2 torrents
$ aria2c -j2 file1.torrent file2.torrent
Download a file via torrent and HTTP/FTP server in parallel
$ aria2c -Ttest.torrent "http://host1/file" "ftp://host2/file"
Only download specific files (usually called selected download )
$ aria2c --select-file=1-4,8 file.torrent
NOTE:
The index is printed to the console using -S option.
Download a .torrent file, but do not download the torrent
$ aria2c --follow-torrent=false "http://host/file.torrent"
Specify the output file name
To specify the output file name for BitTorrent downloads, you need to know the index of
file in the torrent (see --show-files). For example, the output looks like this:
idx|path/length
===+======================
1|dist/base-2.6.18.iso
|99.9MiB
---+----------------------
2|dist/driver-2.6.18.iso
|169.0MiB
---+----------------------
To save 'dist/base-2.6.18.iso' in '/tmp/mydir/base.iso' and 'dist/driver-2.6.18.iso' in
'/tmp/dir/driver.iso', use the following command:
$ aria2c --dir=/tmp --index-out=1=mydir/base.iso --index-out=2=dir/driver.iso file.torrent
Change the listening ports for incoming peer connections
$ aria2c --listen-port=7000-7001,8000 file.torrent
NOTE:
Since aria2 doesn't configure firewalls or routers for port forwarding, it's up to you
to do so manually.
Specify conditions to stop seeding after torrent downloads finish
$ aria2c --seed-time=120 --seed-ratio=1.0 file.torrent
NOTE:
In the above example, the program stops seeding after 120 minutes since download
completed or seed ratio reaches 1.0.
Throttle upload speed
$ aria2c --max-upload-limit=100K file.torrent
Enable IPv4 DHT
$ aria2c --enable-dht --dht-listen-port=6881 file.torrent
NOTE:
DHT uses UDP. Since aria2 doesn't configure firewalls or routers for port forwarding,
it's up to you to do it manually.
Enable IPv6 DHT
$ aria2c --enable-dht6 --dht-listen-port=6881 --dht-listen-addr6=YOUR_GLOBAL_UNICAST_IPV6_ADDR
NOTE:
aria2 uses the same ports as IPv4 for IPv6.
Add and remove tracker URIs
Ignore all tracker announce URIs defined in file.torrent and use http://tracker1/announce
and http://tracker2/announce instead:
$ aria2c --bt-exclude-tracker="*" --bt-tracker="http://tracker1/announce,http://tracker2/announce" file.torrent
More advanced HTTP features
Load cookies
$ aria2c --load-cookies=cookies.txt "http://host/file.zip"
NOTE:
You can use Firefox/Mozilla/Chromium's cookie files without modification.
Resume download started by web browsers or other programs
$ aria2c -c -s2 "http://host/partiallydownloadedfile.zip"
NOTE:
This will only work when the initial download was not multi-segmented.
Client certificate authorization for SSL/TLS
Specify a PKCS12 file as follows:
$ aria2c --certificate=/path/to/mycert.p12
NOTE:
The file specified in --certificate must be contain one PKCS12 encoded certificate and
key. The password must be blank.
Alternatively, if PEM files are supported, use a command like the following:
$ aria2c --certificate=/path/to/mycert.pem --private-key=/path/to/mykey.pem https://host/file
NOTE:
The file specified in --private-key must be decrypted. The behavior when encrypted one
is given is undefined.
Verify SSL/TLS servers using given CA certificates
$ aria2c --ca-certificate=/path/to/ca-certificates.crt --check-certificate https://host/file
NOTE:
This option is only available when aria2 was compiled against GnuTLS or OpenSSL.
WinTLS and AppleTLS will always use the system certificate store. Instead of
`--ca-certificate install the certificate in that store.
RPC
Encrypt RPC traffic with SSL/TLS
Specify a server PKC12 file:
$ aria2c --enable-rpc --rpc-certificate=/path/to/server.p12 --rpc-secure
NOTE:
The file specified in --rpc-certificate must be contain one PKCS12 encoded certificate
and key. The password must be blank.
Alternatively, when PEM files are supported (GnuTLS and OpenSSL), specify the server
certificate file and private key file as follows:
$ aria2c --enable-rpc --rpc-certificate=/path/to/server.crt --rpc-private-key=/path/to/server.key --rpc-secure
And more advanced features
Throttle the download speed
Per-download:
$ aria2c --max-download-limit=100K file.metalink
Overall:
$ aria2c --max-overall-download-limit=100K file.metalink
Repair a damaged download
$ aria2c -V file.metalink
NOTE:
Repairing damaged downloads can be done efficiently when used with BitTorrent or
Metalink with chunk checksums.
Drop connections if download speed is lower than a specified limit
$ aria2c --lowest-speed-limit=10K file.metalink
Parameterized URI support
You can specify set of parts:
$ aria2c -P "http://{host1,host2,host3}/file.iso"
You can specify numeric sequence:
$ aria2c -Z -P "http://host/image[000-100].png"
NOTE:
The -Z option is required if the URIs don't point to the same file, such as in the
above example.
You can specify step counter:
$ aria2c -Z -P "http://host/image[A-Z:2].png"
Verifying checksums
$ aria2c --checksum=sha-1=0192ba11326fe2298c8cb4de616f4d4140213837 http://example.org/file
Parallel downloads of an arbitrary number of URIs, metalink, torrent
$ aria2c -j3 -Z "http://host/file1" file2.torrent file3.metalink
BitTorrent Encryption
Encrypt the whole payload using ARC4 (obfuscation):
$ aria2c --bt-min-crypto-level=arc4 --bt-require-crypto=true file.torrent
SEE ALSO
Project Web Site: https://aria2.github.io/
Metalink Homepage: http://www.metalinker.org/
The Metalink Download Description Format: RFC 5854
COPYRIGHT
Copyright (C) 2006, 2015 Tatsuhiro Tsujikawa
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301 USA
In addition, as a special exception, the copyright holders give permission to link the
code of portions of this program with the OpenSSL library under certain conditions as
described in each individual source file, and distribute linked combinations including the
two. You must obey the GNU General Public License in all respects for all of the code
used other than OpenSSL. If you modify file(s) with this exception, you may extend this
exception to your version of the file(s), but you are not obligated to do so. If you do
not wish to do so, delete this exception statement from your version. If you delete this
exception statement from all source files in the program, then also delete it here.