NAME

       arv-tool-0.8 - manual page for arv-tool-0.8 0.8.23

DESCRIPTION

   Usage:
       arv-tool-0.8 [OPTION?]
              command <parameters>

       Small utility for basic control of a Genicam device.

   Help Options:
       -h, --help
              Show help options

   Application Options:
       -n, --name=<pattern>

       -a, --address=<device_address>

       --register-cache={disable|enable|debug}
              Register cache policy

       --range-check={disable|enable|debug}
              Range check policy

       --access-check={disable|enable}
              Feature access check policy

       -t, --time
              Show execution time

       -d, --debug={<category>[:<level>][,...]|help}

       -v, --version
              Show version

       Command may be one of the following possibilities:

       genicam:
              dump the content of the Genicam xml data

       features:
              list all features

       values:
              list all available feature values

       description [<feature>] ...:
              show the full feature description

       control <feature>[=<value>] ...:
              read/write device features

       network <setting>[=<value>]...:
              read/write network settings

       If no command is given, this utility will list all the available devices.  For the control
       command, direct access to device registers is provided using a R[address] syntax in  place
       of a feature name.

EXAMPLES

       arv-tool-0.8  control  Width=128  Height=128  Gain  R[0x10000]=0x10  arv-tool-0.8 features
       arv-tool-0.8 description Width Height arv-tool-0.8 network mode=PersistentIP  arv-tool-0.8
       network    ip=192.168.0.1   mask=255.255.255.0   gateway=192.168.0.254   arv-tool-0.8   -n
       Basler-210ab4 genicam