Provided by: texlive-extra-utils_2023.20230613-2_all 
NAME
bundledoc - bundle all the files needed by a LaTeX document
SYNOPSIS
bundledoc [--version] [--help] [--[no]verbose] [--texfile=file.tex]
[--directory=directory] [--[no]localonly] [--exclude=string] [--include=filespec]
[--manifest=file] [--listdeps=[yes|no|only|rel]...] [--[no]keepdirs] [--config=file.cfg]
file.dep
DESCRIPTION
bundledoc is a post-processor for the snapshot package that bundles together all the
classes, packages, and files needed to build a given LaTeX document. It reads the .dep
file that snapshot produces, finds each of the files mentioned therein, and packages them
into a single archive file (e.g., a .tar.gz file), suitable for moving across systems,
transmitting to a colleague, etc.
As the simplest example possible, consider a LaTeX file called, say, hello.tex:
\RequirePackage{snapshot} % Needed by bundledoc
\documentclass[11pt]{article}
\begin{document}
Hello, world!
\end{document}
The "\RequirePackage{snapshot}" causes a hello.dep file to be produced. When bundledoc is
then given "hello.dep" as an argument, it locates the dependent files -- snapshot.sty,
article.cls, and size11.clo -- and bundles them into a single archive file, along with
hello.tex and a MANIFEST file (described in "OPTIONS", below).
OPTIONS
In the following descriptions, somefile refers to the name of your main LaTeX document (no
extension).
bundledoc requires the name of the dependency file produced by snapshot, normally
somefile.dep). (For convenience, the file can be specified without its .dep extension.)
The following options may also be given:
--version
Output the bundledoc script's version number. This overrides all of the remaining
options.
--help
Give a brief usage message. This overrides all of the remaining options.
--[no]verbose (default: "noverbose")
bundledoc normally does not output anything except error messages. With "--verbose",
it outputs copious status messages.
--texfile=main .tex file (default: somefile.tex)
snapshot's dependency file does not list the main LaTeX file (the one that gets passed
to latex). In order for bundledoc to find and bundle that file, bundledoc assumes it
has the same name as the snapshot dependency file but with a .tex extension. If this
is not the case, then use "--texfile" to specify the correct filename.
--directory=archive directory (default: somefile)
When bundledoc creates an archive (e.g., a .tar or .zip file) containing the
document's files, it puts all of them in a directory to avoid cluttering the current
directory with files. If the given dependency file is called somefile.dep then the
resulting archive will, by default, store all the dependent files in a somefile
directory. To change the directory name use the "--directory" option.
--[no]localonly (default: "nolocalonly")
Although bundledoc normally archives all of the files named in the .dep file, the
"--localonly" option tells bundledoc to exclude all files located in a directory other
than the .tex file's directory or one of its subdirectories.
--exclude=string (default: none)
While "--localonly" causes files outside of the .tex file's directory tree to be
omitted from the archive, "--exclude" provides finer-grained control over files to
omit from the archive. The "--exclude" option, which can be specified repeatedly on
the command line, causes all files whose name contains string to be omitted from the
archive.
--include=filespec (default: none)
The "--include" option, which can be specified repeatedly on the command line,
instructs bundledoc to include in the archive all of the files matching filespec, even
if they're not referenced in the .dep file.
--manifest=manifest file (default: MANIFEST)
In addition to the dependent files, bundledoc includes in the archive file one extra
file called, by default, ``MANIFEST''. MANIFEST is a text file that lists the
original filenames of all the dependencies. To change the filename from ``MANIFEST''
to something else, use the "--manifest" option. As a special case, "--manifest="""
tells bundledoc not to include a manifest file at all.
--listdeps=[yes|no|only|rel]...] (default: "no")
"--listdeps" accepts one or more of "yes", "no", "only", or "rel" as a comma-separated
list. As long as "no" does not appear in this list, bundledoc outputs all of the main
LaTeX file's dependencies. If the list contains "rel", then bundledoc outputs the
list of dependencies with relative pathnames. If the list contains "only", then
bundledoc exits after displaying the list, without producing an archive.
--[no]keepdirs (default: "nokeepdirs")
Normally, the archive file that bundledoc produces contains a single directory -- and
subdirectories, if the document refers explicitly to them -- in which all the
dependent files lie. If "--keepdirs" is specified, all the dependent files are stored
with their original pathnames. For example, if somefile.tex depends on
figures/somefigure.eps, article.cls, and snapshot.sty, then the somefile archive will
normally contain the following files:
• somefile/somefile.tex
• somefile/figures/somefigure.eps
• somefile/article.cls
• somefile/snapshot.sty
• somefile/MANIFEST
However, "--keepdirs" will cause the somefile archive to contain the following sorts
of filenames instead:
• home/me/mydocs/somefile.tex
• home/me/mydocs/figures/somefigure.eps
• usr/share/texmf/tex/latex/base/article.cls
• usr/share/texmf/tex/latex/snapshot/snapshot.sty
"--directory" is not used when "--keepdirs" is in effect. In addition, no manifest
file is written to the archive file as it contains redundant information.
--config=configuration file (default: <none>)
The "--config" option is used to point bundledoc to the appropriate configuration
(.cfg) file for your TeX distribution and operating system. bundledoc comes with a
few configuration files and it's easy to write more. See "CONFIGURATION FILES"
(below) for a description of the configuration file format. For convenience, the file
can be specified without its .cfg extension.
CONFIGURATION FILES
Format
Configuration files follow a fairly simple format. Lines beginning with "#" are comments.
Blank lines are ignored. All other lines are of the form:
variable: value
The current version of bundledoc recognizes the following variables:
bundle
The command to use to bundle a set of files into a single archive file
sink
The affix to a command to discard its output
find
The command to find a file within the TeX tree(s).
Values that are too long for one line can be split across multiple lines by using "\" as
the line-continuation symbol.
There are two environment variables that bundledoc makes available for use by
configuration-file commands: "BDBASE", which is set to somefile (as in "OPTIONS"), and
"BDINPUTS", which is set to a space-separated list of files that a command is to operate
upon. That is, when the command associated with "bundle" is running, "BDINPUTS" contains
the list of all the files that are to be archived. In contrast, when the command
associated with "find" is running, "BDINPUTS" contains the name of the file to search for.
Examples
The following configuration file parallels bundledoc's default values of the various
configuration-file variables, which represents a kpathsea-based TeX distribution running
on a generic Unix system, which doesn't necessarily have any of the GNU tools, such as
gzip or GNU tar:
# "Default" configuration file
# By Scott Pakin <scott+bdoc@pakin.org>
bundle: (tar -cvf - $BDINPUTS | compress > $BDBASE.tar.Z)
sink: > /dev/null 2>&1
find: kpsewhich -progname=latex $BDINPUTS
The parentheses in the "bundle:" line tell the Unix shell to run the command in a
subshell. This is to make the "sink:" affix work properly (i.e., so there aren't two
">"'s in the same command).
Notice how the commands treat "BDBASE" and "BDINPUTS" like any other environment variables
in a Unix shell, using "$" to take their value. Other operating systems use different
conventions for referring to environment variables. For instance, a configuration file
for a Windows-based TeX distribution would use "%BDBASE%" and "%BDINPUTS%" instead.
The value for "sink:" is specific to an operating system. The value for "find:" is
specific to a TeX distribution. "bundle:" is where the most opportunity for customization
lies. You can use "bundle:" to specify your favorite archive format. For example, you
can produce a shar file on Unix with something like:
bundle: (shar --archive-name="$BDBASE" $BDINPUTS > $BDBASE.sh)
or a CAB file on Microsoft Windows with something like:
bundle: cabarc -r -p N %BDBASE%.cab %BDINPUTS%
EXAMPLES
Assume that myfile.dep was produced from myfile.tex by following the instructions in the
Description section. The following command produces a .zip file with the MikTeX TeX
distribution running on Microsoft Windows:
bundledoc --config=miktex.cfg myfile.dep
This can be abbreviated to
bundledoc --config=miktex myfile
The following builds a .tar.gz archive with the TeX Live distribution running on a Unix-
like operating system. bundledoc will produce verbose output describing its operations.
All files not in the same directory tree as myfile.tex and all files containing ".fd" or
".sty" in their names are omitted. However, all .bib files in the current directory will
be included in the archive even though none of them are referenced by myfile.dep.
Finally, no MANIFEST file will be produced.
bundledoc --config=texlive-unix.cfg --verbose --localonly \
--exclude=.fd --exclude=.cfg --include="*.bib" --manifest="" \
myfile.dep
FILES
The user must have previously installed snapshot.sty and used it to produce a dependency
file for his document. Besides that, the set of external files needed by bundledoc is
system-specific and depends on the configuration file used. (See "CONFIGURATION FILES",
above.)
bundledoc currently comes with two configuration files:
texlive-unix.cfg
Configuration file for TeX Live installations on Unix or Linux. TeX Live is a
kpathsea-based TeX distribution that runs on various flavors of Unix and Microsoft
Windows. texlive-unix.cfg assumes you have gzip and uses it to produce a .tar.gz
archive file. The configuration file has bundledoc use kpsewhich to find LaTeX files.
miktex.cfg
Configuration file for MikTeX installations. MikTeX is a popular TeX distribution for
Microsoft Windows. miktex.cfg assumes you have zip and uses it to produce a .zip
archive file. The configuration file now has bundledoc use kpsewhich to find LaTeX
files; older version of MikTeX required the rather nonstandard initexmf for this
purpose.
texlive-unix-arlatex.cfg
This is a variant of texlive-unix.cfg that uses arlatex instead of gzip to archive
files. arlatex is a script included in the bundledoc distribution that generates a
self-extracting .tex file based on LaTeX's "filecontents" environment.
NOTES
Including and excluding files
The "--localonly", "--exclude", and "--include" options provide control over the archive's
contents. "--exclude" and "--include" can be specified repeatedly on the command line.
The order in which these options are specified is immaterial; bundledoc processes file
inclusions and exclusions in the following order:
1. All files referenced by the .dep file are added to the list of files to archive.
2. If "--localonly" is specified, all files not found in the .tex file's directory are
removed from the list.
3. For each "--exclude" string specified, all files containing that string are removed
from the list.
4. For each "--include" file specification, the set of files designated by its expansion
are added to the list.
Issues When Running Under Microsoft Windows
First, because bundledoc is a Perl script, you should do one of the following to run it
under Windows:
• "perl bundledoc"
• Rename bundledoc to bundledoc.pl and run "bundledoc.pl". (This is assuming you have a
file association set up for .pl.)
• Run the pl2bat script (if you have it) to convert bundledoc to bundledoc.bat, then run
"bundledoc".
Second, Windows uses a multi-rooted filesystem (i.e., multiple drive letters). I wouldn't
be surprised if bad things were to happen if the files to be bundled are scattered across
drives. In addition, Windows supports ``UNC'' filenames, which have no drive letter at
all, just a machine and share name. UNC filenames are also untested waters for bundledoc.
Be careful!
Testing Status
I have tested bundledoc only with Perl v5.6.0 and later and only on the following
platforms:
• Linux + TeX Live
• Linux + teTeX
• Windows NT + MiKTeX
• Solaris + ??? (something kpathsea-based)
It is my hope that bundledoc works on many more platforms than those. I tried to make the
program itself fairly independent of the operating system; only the configuration files
should have to change to run bundledoc on a different system.
Future Work
I'd like bundledoc to work on as wide a variety of TeX distributions as possible. If your
platform is significantly different from the ones listed in "Testing Status" (e.g., if
you're running OS X) and you need to create a substantially different configuration file
from texlive-unix.cfg and miktex.cfg, please send it to me at the address listed in
"AUTHOR" so I can include it in a future version of bundledoc. (I make no promises,
though).
Once bundledoc works on all the major operating systems and TeX distributions it would be
really convenient if I could get bundledoc to detect the platform it's running on and
automatically select an appropriate configuration file.
Finally, it would be handy for bundledoc to include fonts in the archive file. At a
minimum, it should include .tfm files, but it would be even better if it included .mf,
.pfb, .ttf, and other common font formats, as well.
Acknowledgments
Thanks to Fabien Vignes-Tourneret for suggesting what became the "--localonly" option and
for a discussion that led to the "--exclude" and "--include" options; to Marius Kleiner
for updating bundledoc to properly handle document subdirectories; and to Frank Mittelbach
for suggesting using Kpathsea to help find .cfg files and to automatically append .cfg and
.dep extensions if necessary.
SEE ALSO
arlatex(1), gzip(1), kpsewhich(1), latex(1), perl(1), zip(1), the snapshot documentation
AUTHOR
Scott Pakin, scott+bdoc@pakin.org