Provided by: dwarfdump_20210528-1_amd64 
NAME
dwarfdump - dumps DWARF debug information of an ELF object
SYNOPSIS
dwarfdump [options] objectfilename
DESCRIPTION
The dwarfdump command prints or checks DWARF sections as requested by specific options.
With no options (but with the required objectfilename ) all sections print (but some
sections cannot be printed independently safely, so those are only printed at offsets
where the .debug_info section refers to those sections).
For split-dwarf (DWARF5) object files see Split Object Files, DWARF5 section 7.3.
Nearly all options are available in the traditional (single-letter) form and in a long-
options form with meaningful names. New options are only in the long-options form.
With no options dwarfdump prints a basic set of DWARF section information. If any option
is given on the command line the basic set is ignored and one must tell dwarfdump what to
print or check (for example by adding the -a option).
As of June 2011 the printing options and the checking options are mutually exclusive (if
checking options are selected the section details are not printed). When errors are
encountered dwarfdump does attempt to print sufficient context so that one can understand
exactly where the error is in the DWARF. This change makes checking really large object
files much easier.
The format is intended to be human readable. If a script is to parse the output, the
--format-dense (-d) option is useful.
As of December 2020 DWARF expressions are broken out to print each expression (DW_OP_plus
for example) in a block on a separate line. To restore the previous behavior, sort of
like --format-dense but only applying to blocks of DWARF expression operators (DW_OP*).
the --format-expr-ops-joined is useful. If the option is placed in the dwarfdump.conf
file (see the file itself for the format) it will apply without needing to put it on the
command line.
Not all sections actually exist in any given object file.
The output format may change from release to release, so it is unwise to depend too
heavily on the format.
Frame information (.debug_frame and .eh_frame) is heavily dependent on the ABI/ISA of the
object file. By default we use a generic set of register names handling up to 100
registers named r0-r99.
As of 2020 there are three different ways compiler writers separate the DWARF information
from an executable/shared-object. One is DWARF5 Split Dwarf (the --file-tied option is
useful for these). Another is GNU debuglink (libdwarf automatically finds the DWARF when
given the name of the executable, use --no-follow-debuglink to suppress this and make
possible printing the backtrace data in section .eh_frame). The third way is on MacOS:
the debug DWARF is in a separate object (dwarfdump/libdwarf automatically find it if it is
present, --no-follow-debuglink suppresses this finding).
In many cases one can get additional detail by specifying -v (sometimes -v -v gets even
more, see the --verbose discussion below). When printing DIEs (Debugging Information
Entries) the options -G (showing global offsets) and -M (naming the DW_FORM* of
attributes) (or their -- counterparts) can be a great aid to understanding DWARF..
The --format-registers (-R) option uses a built-in generic register name set handling up
to 1200 registers named r0-r1199.
The --file-abi=<abi> (-x abi=<abi>) description below shows how to name an abi and use
that to guide the --print-frame (-f) or --print-eh-frame (-F) processing.
One of --print-frame (-f) or --print-eh-frame (-F) implies lots of abi (register names,
register counts) in the output, but sections other than frame sections may also need
register names.
Unless the cpu for the object file being dumped has many registers, do not use --format-
registers or -file-abi=<abi> as those can be needlessly slow dumping frame sections.
Instead, use the correct abi (if it exists in dwarfdump.conf) or a generic such as --file-
abi=abi=generic100 or --file-abi=abi=generic500
.
The most useful abi choices are likely mips or x86 or x86_64 or ppc or arm
. Without --format-registers (-R) or -file-abi=<abi> (-x abi=<abi>) dwarfdump uses a
compiled-in generic set of register names. If no --file-name=<path> (-x name=<path>) is
given, dwarfdump looks for "./dwarfdump.conf", "$HOME/dwarfdump.conf",
"$HOME/.dwarfdump.conf", "<install-prefix>/lib/dwarfdump.conf" and takes the first it
finds. Use the --show-dwarfdump-conf option to see what dwarfdump finds. If one or more
--file-name=<path> (-x name=<path>) is given the last of these is used and all other such
files are ignored.
Some checking ( -k) options (See "Check DWARF Integrity" in the help output) print so-
called harmless errors. These are compiler errors that do not cause any known problem and
are only detected inside libdwarf itself. These are difficult to properly report in
dwarfdump and any error strings may not appear close to the time the error was
encountered.
If zlib compression was used on the DWARF sections in the object file being read the real
section names such as .zdebug_info etc will be reported by dwarfdump. When dwarfdump says
something is at offset 55 of .zdebug_info (or the like) keep in mind that the offset
applies to the uncompressed section (in memory), not the .zdebug_ compressed section in
objectfilename.
URI-STYLE INPUT STRINGS
The <objectfilename> and all the options taking name strings look for URIs and translate
the URI strings to characters by default. So any single % character is treated as if the
following two characters are hex digits representing the underlying true character.
Various characters are meaningful to shells (such as bash or sh) and to getopt (such as
the space character) If the URI translation does anything it prints the before and after
of the URI translation on standard output, so inspection of the first lines of output will
show if URI did anything. The actual options themselves are assumed to be non-URI. So in
the option --format-producer=S&T (-cS&T) the & character might cause input issues so
--format-producer=S%26T should be used instead. To actually input a single % character
(in a name, for example), double it to %% on the command line (or use %25).
Options --format-suppress-uri (-U) (turning off URI interpretation) and --format-suppress-
uri-msg (-q) (making finding URI sequences silent) give finer control of URI
interpretation.
As an example, to get a string 'a b' make the string 'a%20b' (here the quote (') is for
exposition not part of the string, though quote is certainly problematic in a name).
Instead of escaping " quotes in the string, type %25, as in 'a "b' should be typed
'a%20%25b'. Any characters can be typed in URI style, not just characters which are
problematic to the shell or getopt. We strongly suggest you not type URI-style characters
where such are not needed or use the % character itself in command line strings unless you
must.
URI-STYLE OUTPUT (printing)
Dwarfdump translates any characters in strings which are not ordinary printable ASCII (and
some which are ASCII) in the reverse of the previous section. It prints into a uri-style
output in the form %xx, where xx are hex digits in the form of ASCII 0-9a-0f. The percent
character(%) is printed as '%25'
This is a clumsy way to deal with UTF-8 strings and sensible way to deal with the low
ASCII values that on many systems cause one's terminal to behave oddly. Such translations
are not idempotent so dwarfdump avoids doing the translation more than once on any string.
See option --format-suppress-sanitize below to eliminate the output transformation.
PRINTING OPTIONS
--print-all (-a)
Print each section as independently as possible. Sections that can safely be
printed independently (like .debug_abbrev) have relevant info printed in the report
(sometimes dependent on -v).
--print-abbrev (-b)
Print the .debug_abbrev section. Because the DWARF specifications do not rule out
garbage data areas in .debug_abbrev (if they are not referenced from .debug_info)
any garbage bytes can result in this print failing.
--print-loc (-c)
Print locations lists.
--print-debug-gnu
Print the .debug_gnu_pubnames and .debug_gnu_typenames sections.
--print-fission
Print the .gdb_index, .debug_cu_index,
.debug_tu_index, .gnu.debuglink,
and .note.gnu.build-id sections.
--print-gnu-debuglink
Print .gnu_debuglink and .note.gnu.build-id sections
--elf (-E)
prints, for Elf objects, object file details. See the "Print ELF Section Headers"
section of the help file for additional choices on elf printing. If libdwarf or
dwarfdump is built without libelf this and related options are not available.
--print-frame (-f)
Print the .debug_frame section.
--print-eh-frame (-F)
Print the GNU .eh_frame section.
--print-info (-i)
Print the .debug_info section.
--print-fission (-I)
Print any .gdb_index, .debug_cu_index, and .debug_tu_index sections that exist in
the object.
--print-gnu-debuglink
If the .gnu_debuglink section is present its content is printed. If the
.note.gnu.build-id section is present its content is printed. If a DWARF
containing file named by the content of the .gnu_debuglink section exists the name
will be printed.
--print-lines (-l)
Print the .debug_info section and the associated line section data.
--print-lines-short (-ls)
Print the .debug_info section and the associated line section data, but omit the
<pc> address. Useful when a comparison of line sections from objects with slight
differences is required.
--print-macinfo (-m)
Print the .debug_macinfo (DWARF 2,3,4) and .debug_macro (DWARF5) sections. The
.debug_macro reporting may show output labeled MACRONOTES, mentioning macro content
that might be questionable. See also --check-macros (-kw).
--print-ranges (-N)
Print .debug_ranges section. Because the DWARF specifications do not rule out
garbage data areas in .debug_ranges (if they are not referenced from .debug_info)
any garbage bytes can result in this print failing.
--print-pubnames (-p)
Print the .debug_pubnames section.
--print-str-offsets
Print the .debug_str_offsets section.
--print-aranges (-r)
Print the .debug_aranges section.
--print-strings (-s)
Print .debug_string section.
--print-static (-ta)
Print the IRIX only sections .debug_static_funcs and .debug_static_vars.
--print-type (-y)
Print the .debug_pubtypes section (and .debug_typenames, an SGI IRIX-only section).
Having dwarfdump print relocations may help establish whether dwarfdump understands any
relocations that might exist. Other tools may be more useful than dwarfdump for printing
object-file details. If dwarfdump or libelf is built without libelf the relocation
options are not available. See "Print Elf Relocation Data" in the help output for
additional relocation printing choices.
--reloc (-o)
Print all relocation records as well as we can manage. If libdwarf or dwarfdump
were built without libelf this option is unavailable.
--version (-V)
Print a dwarfdump date/version string and stop.
CHECKING OPTIONS
--check-all (-ka)
Turns on all checking options except --check-frame-extended (-kxe) (which might be
slow enough one might not want to use it routinely.)
--check-abbrev (-kb)
Checks for certain abbreviations section errors when reading DIEs.
--check-macros (-kw)
Checks for issues in DWARF5 .debug_macro and identifies issues that might be
questionable but not necessarily errors with the string MACRONOTES (and reports
some MACRONOTES that --print-macinfo will not show). It also checks
.debug_macinfo, but less thoroughly and never emits MACRONOTES for .debug_macinfo.
See also --print-macinfo (-m). (regrettably inconsistent spelling...).
--check-constants (-kc)
Checks for errors in constants in debug_info.
-check-show (-kd)
Turns on full reporting of error totals per producer. (the default shows less
detail).
--check-silent-ks
Turns off some verbose checking detection.
--check-attr-dup (-kD)
Turns on reporting of duplicated attributes. Duplicated attributes on a single
DW_TAG are improper DWARF, but at least one compiler emitted such.
--check-pubnames (-ke)
Turns on reading pubnames and checking for fde errors.
--check-frame-info (-kf)
Turns on checking for FDE errors (.debug_frame and .eh_frame).
--check-files-lines (-kF)
Turns on checking for line table errors.
--check-gaps (-kg)
Turns on checking for unused gaps in .debug_info (these gaps are not an error, just
a waste of space).
--check-unique (-kG)
Print only unique errors. Error lines are simplified (hex numbers removed, for
example) and when a given message string would otherwise appear again it is
suppressed.
--check-summary (-ki)
Causes a summary of checking results per compiler (producer) to be printed at the
end.
--check-loc (-kl)
Turns on locations list checking.
--check-ranges (-km)
Turns on checking of ranges.
--check-aranges (-kM)
Turns on checking of aranges.
--check-tag-attr (-kr)
Turns on DIE tag-attr combinations checking, looking for surprising attributes for
DIE tags. Prints a DWARF-CHECK message for each such found. It does not report
common extensions as errors. A summary of usage is printed at the end. Common
extensions to the standard are allowed as if standard. See the -C (--format-
extensions) option to show common extensions as DWARF-CHECK messages. See -kuf
(--check-usage-extended) to add additional details to the summary report.
--check-usage (-ku)
The same as -kr except only the summary is printed at the end, the detailed DWARF-
CHECK messages per instance are not printed.
--check-attr-encodings (-kE)
Checks the integer encoding representation of constant FORMs in debug_info,
computing whether these integer values could fit in fewer bytes if represented in
LEB128 and reports the space saving that would achieve.
--check-forward-refs (-kR)
Turns on reading DIEs and checking for forward declarations from
DW_AT_specification attributes. (which are not an error but can be a source of
inefficiency for debuggers).
--check-self-refs (-kS)
Turns on checking DIE references for circular references.
--check-tag-tag (-kt)
Turns on tag-tag combinations checking, looking for surprising parent-child DIE
relationships. It does not report common extensions as errors. Common extensions
to the standard are allowed as if standard. See the -C (--format-extensions)
option to show common extensions as errors.
--check-frame-basic (-kx)
Turns on basic frames checking for .debug_frame and .eh_frame).
--check-frame-extended (-kxe)
Turns off basic check_frames and turns on extended frame checking for .debug_frame
and .eh_frame. This option can be slow.
--check-type (-ky)
Turns on type_offset checking (ensuring local attribute offsets refer to what they
should) and that DW_AT_decl_file and some other offsets refer to appropriate
locations.
OPTION MODIFIERS
--format-extensions (-C)
This is a secondary option after --check-tag-tag (-kt) or --check-tag-attr (-kr) or
Normally when checking for tag-tag or tag-attribute combinations both the standard
combinations and some common extensions are allowed (not reported). With this
option the extensions are taken out of the class of allowed combinations.
-kuf (--check-usage-extended)
This modifies --check-tag-attr (-kr) or --check-usage (-ku) to print additional
details in the summary. Add the -kuf (--check-usage-extended) before or after the
option it modifies.
--format-dense (-d)
When printing DIEs, put all the attributes for each DIE on the same (long) line as
the TAG. This makes searching for DIE information (as with grep) much simpler as
the entire DIE is on one line.
--format-suppress-offsets (-D)
Turns off the display of section offsets and attribute values in printed output.
So the .debug_info output is just TAGs and Attributes. For pubnames (and the like)
it removes offsets from the output. For locations lists it removes offsets from
the output, but that is useless since the attribute values don't show so neither
does the location data.
--format-ellipsis (-e)
Turns on truncation of attribute and tag names. For example DW_TAG_foo becomes foo.
Not compatible with checking, only useful for printing DIEs.
--format-global-offsets (-G)
When printing, add global offsets to the offsets printed.
--format-limit=<num> (-H number)
When printing or checking .debug_info, this terminates the search after 'number'
compilation units. When printing frame information this terminates the FDE
reporting after 'number' FDEs and the CIE reporting (which occurs if one adds -v)
after 'number' CIEs. Example '--format-limit=1'
--format-attr-name (-M)
When printing, show the FORM for each attribute. If a -v is added (or more than
one) then details of any form indirection are also shown.
--format-suppress-lookup (-n)
When printing frames, this turns off the search for function names in inner scopes.
Unless the language used to build the object file supports function definitions in
inner scopes there is no point in looking for function names in inner scopes. And
a really large object the search can take more time than one wants to wait. This
option suppresses the inner scope search.
--file-output=<path> (-Ofile=<path>)
The <path> will be used as the file name for output instead of writing to stdout
(stdout is the default).
--format-suppress-data (-Q)
Suppresses section data printing (set automatically with a checking option).
--format-suppress-sanitize
Suppresses the default string-printing translations so non-ascii and non-printable
characters from the object file are printed as-is. See "URI-STYLE OUTPUT" above.
--format-suppress-uri (-U)
Suppresses the default URI translation of following options on the command line.
See "URI-STYLE INPUT STRINGS" above.
--format-registers (-R)
When printing frames for ABIs with lots of registers, this allows up to 1200
registers to be named (like R999) without choosing an ABI with, for example '-x
abi=ppc' or, equivalently, '--file-abi=ppc'
--verbose (-v)
Increases the detail shown when printing. In some sections, using more -v options
will increase the detail (one to four are useful) or may change the report to show,
for example, the actual line-data-commands instead of the resultant line-table.
Two to four -v options make a difference when printing DIEs and rnglists (-i),
lines (-l), frames (-f,-F), gdb_index(-I). Additional -v beyond four do not
currently add-to or change the output.
--show-dwarfdump-conf
Shows what files are checked to find a dwarfdump.conf and its register naming
tables.
LIMITING OUTPUT
The simplest limiting option is to stop the examination/printing after <num> compilation
units. See -H and --format-limit above. This option also limits the number of FDEs and
CIEs printed from any .debug_frame or .eh_frame section.
The --search (-S) options print information about the compilation unit and DIE where the
string(s) appear. These cannot be combined with other options. At most one of each of
the following is effective (so for example one can only have one 'match', but one can have
a 'match', an 'any', and a 'regex'). Any --search (-S) causes the .debug_info section to
be inspected. No checking options or printing options should be supplied with
--search(-S) options. The strings should use URI-style to avoid any conflicts with the
command-line parser applicable (bash, sh, ...) or getopt(), as well as using URI to deal
with searching for strings in non-ASCII such as French, (etc) or the now-nearly-universal
UTF8.
These are particularly useful when the amount of DWARF information output by -i is
multiple gigabytes of data.
If -Sv used instead of -S , the number of occurrences is printed. (see below for an
example).
--search-match=<string> (-Smatch=string)
--search-match-count=<string> (-Svmatch=string)
When printing DIEs for each tag value or attribute name that matches 'string'
exactly print the compilation unit information and its section offset. Any CU with
no match is not printed. The 'string' is read as a URI string. The count (Sv)
form reports the count of occurrences.
--search-any=<string> (-Sany=string)
--search-any-count=<string> (-Svany=string)
When printing DIEs for each tag value or attribute name that contains 'string'
somewhere in the tag or attribute (case insensitive) print the compilation unit
information and its section offset. Any CU with no match is not printed. The
'string' is read as a URI string. The count (Sv) form reports the count of
occurrences.
--search-regex=string (-Sregex=string)
--search-regex-count=string (-Svregex=string)
When printing DIEs for each tag value or attribute name where the 'string' regular
expression matches print the compilation unit information and its section offset.
Any CU with no match is not printed. The 'string' is read as a URI string. The
count (Sv) form reports the count of occurrences.
The string cannot have spaces or other characters which are meaningful to getopt(3) and
the shell will strip off quotes and other characters. So the string is assumed to be in
URI style and is translated. In other words, to match 'a b' make the -S string 'a%20b'
Instead of escaping " quotes in the string, type %25, as in
'a "b' should be typed 'a%20%25b' (the ' are for exposition here, not part of the
strings). Any characters can be typed in URI style, not just characters which are
problematic to the shell or getopt.
The --search-any (-Sany) and --regex-any (-Sregex) options are only usable if regular-
expression library functions required are found at configure time.
The --search-print (-W) option is a modifier to the -S option, and increases the amount of
output -S prints. An example v modifier to the -S option is shown below. And we show the
-W in context with a -S option.
--search-match-count=string
Prints information about the DIEs that -S matches and prints the count of
occurrences.
-S match=string1 -W
--search-match=string1 --search-print-tree
Prints the parent tree and the children tree for the DIEs that --search-match
matches.
-S match=string2 -Wp
--search-match=string2 --search-print-parent
Prints the parent tree for the DIEs that -S matches.
-S match=string3 -Wc
--search-match=string3 --search-print-children
Prints the children tree for the DIEs that -S matches.
--format-gcc (-cg)
Restricts printing/checking to compilers whose producer string starts with 'GNU'
and turns off -cs.
--format-snc (-cs)
Restricts printing/checking to compilers whose producer string starts with 'SN' and
turns off -cg.
--format-producer=<name> (-c<name>)
Restricts printing/checking to compilers whose producer string contains 'name' (not
case sensitive). The 'name' is read as a URI string.
OTHER OPTIONS
-x name=<path>
--file-name=/p/a/t/h.conf (-xname=/p/a/t/h.conf)
The file path given is the name of a file assumed to be a dwarfdump.conf-like file.
The file path is read as a URI string.
-x abi=ppc
--file-abi=ppc
Selects the abi (from a dwarfdump.conf file) to be used in printing frame
information (here using ppc as an example). The abi is read as a URI string.
--format-group-number=<n> (-x groupnumber=<n>)
For an object file with both DWARF5 split dwarf (.debug_info.dwo for example) and
ordinary DWARF sections (.debug_info for example) in the single object file one
must use --format-group-number=2 to print the dwo sections. Adding --file-
tied=<path> naming the object file ties in the non-dwo skeleton sections (the
<path> is to the skeleton object file when the main object file is dwo/dwp).
-x tied=/t/i/depath
--file-tied=/t/i/depath
Used when opening a main object that is a .dwo or .dwp file. For example if
/path/to/myapp.dwp is the split-dwarf object and /path/to/myapp is the executable,
do "dwarfdump --file-tied=/path/to/myapp /path/to/myapp.dwp" . The tied file path
names the executable which has the .debug_addr section that may be referred to from
the main object. See Split Objects (aka Debug Fission) in the DWARF5 standard.
This cannot be used with MacOS debug or GNU debuglink, such files do not have a
Split Dwarf object file.
-x line5=s2l
--file-line5=s2l
Normally used only to test libdwarf interfaces. There are 4 different interface
function sets and to ensure they all work this option lets us choose which to use.
The options are 's2l' (default, Allows standard and two-level line tables using the
latest interface functions), 'std' (Allows standard single level line tables using
the latest interface functions), 'orig' (allows DWARF2,3,4 original line tables
using an older interface function set), 'orig2l' (allows original line tables and
some two-level line tables using an older interface set).
--print-producers
-P When checking this adds the list of compilation-unit names seen for each
producer-compiler to the printed checking results.
-q
--format-suppress-uri-msg
When a URI is found and translated while reading the command line, be quiet about
the URI translation. That is, don't print the original and translated option
strings.
-u cuname
--format-file=<file>
Turns on selective printing of DIEs (printing like -i). Only the DIEs for a
compilation unit that match the name provided are printed. If the compilation unit
is ./a/b/c.c the 'cuname' you provide should be c.c as the characters through the
final path-separating / are ignored. If 'cuname' begins with a / then the entire
name string of a compilation unit must match 'cuname'. The 'file' is read as a URI
string.
-U
--format-suppress-uri
Turn off the URI interpretation of the command line strings entirely. Must be be on
the command line before any URI strings encountered to be fully effective. Likely
something no one needs to do.
-h
--help Show this man page.
SPLIT DWARF
With Split Dwarf (DWARF5) the main body of the DWARF is in a separate file, often having
the name suffix .dwp or .dwo .
For example if /path/to/myapp.dwp is the split-dwarf object and /path/to/myapp is the
executable, do "dwarfdump --file-tied=/path/to/myapp /path/to/myapp.dwp" . The tied file
path names the executable which has the .debug_addr section and other sections that may be
referred to from the .dwo/.dwp object.
See Split Object Files (sometimes called Debug Fission) in the DWARF5 standard, section
7.3.
FILES
dwarfdump
./dwarfdump.conf
$(HOME)/.dwarfdump.conf
$(HOME)/dwarfdump.conf
<install-prefix>/lib/dwarfdump.conf
NOTES
In some cases compilers use DW_FORM_data1 (for example) and in such cases the signedness
of the value must be taken from context. Rather than attempt to determine the context,
dwarfdump prints the value with both signedness whenever there is ambiguity about the
correct interpretation. For example, "DW_AT_const_value 176(as signed = -80)".
For normal DWARF consumers that correctly and fully evaluate all attributes there is no
ambiguity of signedness: the ambiguity for dwarfdump is due to dwarfdump evaluating DIEs
in a simple order and not keeping track of much context.
BUGS
Support for printing certain DWARF5 location expressions is incomplete. Report problems
to libdwarf-list -at- linuxmail -dot- org
DWARFDUMP()