Provided by: texlive-base_2023.20230613-3_all 
NAME
fmtutil - manage TeX formats and Metafont bases, per-user
fmtutil-sys - manage TeX formats and Metafont bases, system-wide
mktexfmt - create a TeX format or Metafont base
SYNOPSIS
fmtutil [-user|-sys] [OPTION] ... [COMMAND]
fmtutil-sys [OPTION] ... [COMMAND]
fmtutil-user [OPTION] ... [COMMAND]
mktexfmt FORMAT.fmt|BASE.base|FMTNAME
DESCRIPTION
fmtutil version r60154 (2021-08-03 23:55:56 +0200)
Rebuild and manage TeX fmts and Metafont bases, collectively called "formats" here.
(MetaPost no longer uses the past-equivalent "mems".)
If not operating in mktexfmt mode, exactly one command must be given, filename suffixes
should generally not be specified, no non-option arguments are allowed, and multiple
formats can be generated.
If the command name ends in mktexfmt, only one format can be created. The only options
supported are --help and --version, and the command line must be either a format name,
with extension, or a plain name that is passed as the argument to --byfmt (see below).
The full name of the generated file (if any) is written to stdout, and nothing else. The
system directories are used if they are writable, else the user directories.
By default, the return status is zero if all formats requested are successfully built,
else nonzero.
OPTIONS
--sys use TEXMFSYS{VAR,CONFIG}
--user use TEXMF{VAR,CONFIG}
--cnffile FILE
read FILE instead of fmtutil.cnf (can be given multiple times, in which case all
the files are used)
--dry-run, -n
don't actually build formts
--fmtdir DIR
write formats under DIR instead of TEXMF[SYS]VAR
--no-engine-subdir
don't use engine-specific subdir of the fmtdir
--no-error-if-no-format
exit successfully if no format is selected
--no-error-if-no-engine=ENGINE1,ENGINE2,...
exit successfully even if a required ENGINE
is missing, if it is included in the list.
--no-strict
exit successfully even if a format fails to build
--nohash
don't update ls-R files
--recorder
pass the -recorder option and save .fls files
--refresh
recreate only existing format files
--status-file FILE
append status information about built formats to FILE
--quiet
be silent
--catcfg
(does nothing, exists for compatibility)
--dolinks
(does nothing, exists for compatibility)
--force
(does nothing, exists for compatibility)
--test (does nothing, exists for compatibility)
Commands:
--all recreate all format files
--missing
create all missing format files
--byengine ENGINE
(re)create formats built with ENGINE
--byfmt FORMAT
(re)create format FORMAT
--byhyphen HYPHENFILE
(re)create formats that depend on HYPHENFILE
--enablefmt
FORMAT[/ENGINE] enable FORMAT, as built with ENGINE
--disablefmt FORMAT[/ENGINE]
disable FORMAT, as built with ENGINE If multiple formats have the same name and
different engines, /ENGINE specifier is required.
--listcfg
list (enabled and disabled) configurations, filtered to available formats
--showhyphen FORMAT
print name of hyphen file for FORMAT
--version
show version information and exit
--help show this message and exit
ENVIRONMENT
Explanation of trees and files normally used:
If --cnffile is specified on the command line (possibly multiple times), its
value(s) are used. Otherwise, fmtutil reads all the fmtutil.cnf files found by
running "kpsewhich -all fmtutil.cnf", in the order returned by kpsewhich. Files
specified via --cnffile are first tried to be loaded directly, and if not found and
the file names don't contain directory parts, are searched via kpsewhich.
In any case, if multiple fmtutil.cnf files are found, all the format definitions
found in all the fmtutil.cnf files are merged.
Thus, if fmtutil.cnf files are present in all trees, and the default layout is used
as shipped with TeX Live, the following files are read, in the given order.
For fmtutil-sys:
TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/fmtutil.cnf
TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/fmtutil.cnf
TEXMFLOCAL $TEXLIVE/texmf-local/web2c/fmtutil.cnf
TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/fmtutil.cnf
For fmtutil-user:
TEXMFCONFIG $HOME/.texliveYYYY/texmf-config/web2c/fmtutil.cnf
TEXMFVAR $HOME/.texliveYYYY/texmf-var/web2c/fmtutil.cnf
TEXMFHOME $HOME/texmf/web2c/fmtutil.cnf
TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/fmtutil.cnf
TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/fmtutil.cnf
TEXMFLOCAL $TEXLIVE/texmf-local/web2c/fmtutil.cnf
TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/fmtutil.cnf
(where YYYY is the TeX Live release version).
According to the actions, fmtutil might update one of the existing cnf files or
create a new fmtutil.cnf, as described below.
Where format files are written:
By default, format files are (re)written in $TEXMFSYSVAR/ENGINE by fmtutil-sys, and
$TEXMFVAR/ENGINE by fmtutil-user, where /ENGINE is a subdirectory named for the
engine used, such as "pdftex".
For mktexfmt, TEXMFSYSVAR is used if it is writable, else TEXMFVAR.
If the --fmtdir=DIR option is specified, DIR is used instead of TEXMF[SYS]VAR, but
the /ENGINE subdir is still used by default.
In all cases, if the --no-engine-subdir option is specified, the /ENGINE subdir is
omitted.
Where configuration changes are saved:
If config files are given on the command line, then the first one given will be
used to save any changes from --enable or --disable.
If the config files are taken from kpsewhich output, then the algorithm is more
complicated:
1) If $TEXMFCONFIG/web2c/fmtutil.cnf or $TEXMFHOME/web2c/fmtutil.cnf appears in the
list of used files, then the one listed first by kpsewhich --all (equivalently, the
one returned by "kpsewhich fmtutil.cnf"), is used.
2) If neither of the above two are present and changes are made, a new config file
is created in $TEXMFCONFIG/web2c/fmtutil.cnf.
In general, the idea is that if a given config file is not writable, a higher-level
one can be used. That way, the distribution's settings can be overridden
system-wide using TEXMFLOCAL, and system settings can be overridden again in a
particular user's TEXMFHOME or TEXMFCONF.
Resolving multiple definitions of a format:
If a format is defined in more than one config file, then the definition coming
from the first-listed fmtutil.cnf is used.
Disabling formats:
fmtutil.cnf files with higher priority (listed earlier) can disable formats in
lower priority (listed later) fmtutil.cnf files by writing a line like this in the
higher-priority fmtutil.cnf file:
#! <fmtname> <enginename> <hyphen> <args>
The #! must be at the beginning of the line, with at least one space or tab
afterward, and there must be whitespace between each word on the list.
For example, you can disable the luajitlatex format by creating the file
$TEXMFCONFIG/web2c/fmtutil.cnf with the line
#! luajitlatex luajittex language.dat,language.dat.lua lualatex.ini
(As it happens, the luajittex-related formats are precisely why the
--no-error-if-no-engine option exists, since luajittex cannot be compiled on all
platforms. So this is not needed.)
fmtutil-user (fmtutil -user) vs. fmtutil-sys (fmtutil -sys):
When fmtutil-sys is run or the command line option -sys is used, TEXMFSYSCONFIG and
TEXMFSYSVAR are used instead of TEXMFCONFIG and TEXMFVAR, respectively. This is the
primary difference between fmtutil-sys and fmtutil-user.
See https://tug.org/texlive/scripts-sys-user.html for details.
Other locations may be used if you give them on the command line, or these trees
don't exist, or you are not using the original TeX Live.
Supporting development binaries:
If an engine name ends with "-dev", formats are created in the respective directory
with the -dev stripped. This allows for easily running development binaries in
parallel with the released binaries.
REPORTING BUGS
Report bugs to: tex-live@tug.org
TeX Live home page: <https://tug.org/texlive/>