Provided by: rickslab-gpu-utils_3.8.0-1_all 
NAME
gpu-ls - display details about compatible GPU cards
SYNOPSIS
gpu-ls [--short | --long | --raw | --table]
gpu-ls [--pstates | --ppm | --features | --clinfo]
gpu-ls [--no_markup] [--force_all] [--verbose] [--no_fan] [--debug]
gpu-ls [--help | --about]
DESCRIPTION
gpu-ls displays most relevant parameters for installed and compatible GPUs. The default
behavior is to list relevant parameters by GPU. OpenCL platform information is added when
the --clinfo option is used. A brief listing of key parameters is available with the
--short command line option. A simplified table of current GPU state is displayed with
the --table option. The --no_fan can be used to ignore fan settings. The --pstate option
can be used to output the p-state table for each GPU instead of the list of basic
parameters. The --ppm option is used to output the table of available power/performance
modes instead of basic parameters. The --features option is used to output the table of
amdgpu pp features and their status instead of basic parameters. The --force_all option
will result in the attempt read of all of the sensors defined in rickslab-gpu-utils. The
--raw option will attempt to read all possible driver files and display a lightly
formatted version of the results. Finally, the --verbose option will result in
informational messages to be displayed. By default, output data is formatted and color
coded, so the --no_markup option can be specified to get plain text.
OPTIONS
--about
Will display details about gpu-ls.
--short
Will display short list of key descriptive parameters for each installed GPU.
--long
Will display long list of descriptive parameters and all of output for ppm, pstate,
features, and clinfo reports for each installed GPU.
--table
Will display table of basic GPU parameters.
--raw Will display a summary from the reading of all driver files, evening those not used
by rickslab-gpu-utils. The output will indicate which sensors are used and the
contents of all driver files that are readable.
--ppm Will display descriptions of available power performance modes.
--pstates
Will display P-state table for system and memory clocks.
--features
Will display PP Features table that gives details of driver feature status.
--clinfo
If the clinfo package is installed, openCL details will be included in the output
for each compatible GPU.
--no_fan
Will exclude fan information from the display. Useful with water cooled GPUs.
--no_markup
Outputs plain text instead of color formatted text.
--force_all
Forces the read of all configured sensors and includes a summary of sensors that
could not be read.
--verbose
Display informational messages generated during execution.
--debug
Will output additional useful debug/troubleshooting details to a log file.
-h, --help
Display help text and exit.
EXAMPLES
gpu-ls
This will display the basic parameters for all compatible GPUs. These include device ID,
GPU frequency/voltage control type, decoded device ID, card model, short card model,
display card model, card number, card path, PCIe ID, driver, vBIOS version, HWmon path,
current power, power cap, power cap range, fan enable, fan PWM mode, current fan PWM,
current fan speed, fan target speed, fan speed range, fan PWM range, current temp,
critical temp, current VddGF, Vddc range, current GPU loading, memory details, link speed,
link width, current Sclk p-state, current Sclk frequency, Sclk range, current Mclk p-
state, current Mclk frequency, Mclk range, power performance mode, and power force
performance level.
gpu-ls --short --verbose
This will produce a short list of key descriptive parameters for each installed GPU.
Informational messages on utility execution will be displayed before the GPU summary
output.
gpu-ls --clinfo
In addition to the basic parameters, openCL parameters are also displayed for each
compatible GPU. This option is dependent on the installation of clinfo.
gpu-ls --ppm
Instead of the basic parameters, a table of power/performance modes is displayed.
gpu-ls --pstates
Instead of the basic parameters, a table of power states or curve points is displayed.
gpu-ls --raw
This option will probe all possible driver files and display a summary that shows the
results of reading the files. If the driver file used by the utility, then the utility
keyword and description will be included in the output colored green. Details read from
each file are displayed in cyan.
CONFIGURATION
In order to get maximum capability of these utilities, you should be running with a kernel
that provides support of the GPUs you have installed. If using AMD GPUs, installing the
latest amdgpu driver package or the latest ROCm release, may provide additional
capabilities. If you have Nvidia GPUs installed, nvidia-smi must also be installed in
order for the utility reading of the cards to be possible. Writing to GPUs is currently
only possible for AMD GPUs, and only with compatible cards and with the AMD ppfeaturemask
set to 0xfffd7fff. This can be accomplished by adding amdgpu.ppfeaturemask=0xfffd7fff to
the GRUB_CMDLINE_LINUX_DEFAULT value in /etc/default/grub and executing sudo update-grub.
FILES
/usr/share/misc/pci.ids
The system list of all known PCI ID's (vendors, devices, classes and subclasses).
It can be updated with the update-pciids command.
/sys/class/drm/card*/device/pp_od_clk_voltage
Special driver file for each AMD GPU required by some rickslab-gpu-utils.
/etc/default/grub
The grub defaults file where amdgpu.ppfeaturemask needs to be set.
BUGS
Known to not work well with Fiji ProDuo cards and will issue warning messages for Fiji
Nano cards. Please report any additional bugs/issues at https://github.com/Ricks-Lab/gpu-
utils
SEE ALSO
clinfo(1), amdgpu(4), nvidia-smi(1), update-grub(8), update-pciids(8), lspci(8)
AVAILABILITY
The gpu-ls command is part of the rickslab-gpu-utils package and is available from
https://github.com/Ricks-Lab/gpu-utils