NAME

       GTKTerm - A simple GTK+ serial port terminal

SYNOPSIS

       gtkterm [ options ]

DESCRIPTION

       gtkterm is a simple GTK+ terminal used to communicate with the serial port.

OPTIONS

       gtkterm accepts the following options:

       -h, --help Help screen.

       -c, --config <configuration>
              Load configuration (default is "default").

       -p, --port <device>
              Serial port device (default /dev/ttyS0).

       -s, --speed <speed>
              Serial port speed (default 115200).

       -b, --bits <bits>
              Number of bits (default 8).

       -t, --stopbits <stopbits>
              Number of stopbits (default 1).

       -a, --parity <odd | even>
              Partity (default none).

       -w, --flow <Xon | CTS>
              Flow control (default none).

       -d, --delay <ms>
              End of line delay in ms (default none).

       -r, --char <char>
              Wait for a special char at end of line (default none).

       -f, --file <filename>
              Default file to send (default none).

       -e, --echo
              Set local echo.

       -x, --rts_time_before <ms>
              For rs485, time in ms before transmit with rts on

       -y, --rts_time_after <ms>
              For rs485, time in ms after transmit with rts on

       -e, --echo
              Switch on local echo

       -L, --disable-port-lock
              Do not lock serial port. Allows to send to serial port from different terminals.

AUTHOR

       gtkterm  was written by Julien Schmitt.  Maintained at https://github.com/Jeija/gtkterm by
       Willem van den Akker, Florian Euchner

       This manual page was written by  Sebastien  Bacher  <seb128@debian.org>,  for  the  Debian
       GNU/Linux system (but may be used by others).

                                        September 15, 2019                             GTKTerm(1)