Provided by: ioping_1.3-1_amd64 
NAME
ioping - simple disk I/O latency monitoring tool
SYNOPSYS
ioping [-ABCDJLNRWGYykq] [-a count] [-b count] [-c count] [-e seed] [-i interval]
[-l speed] [-r rate] [-t time] [-T time] [-s size] [-S wsize] [-o offset]
[-w deadline] [-p period] [-P period] [-I [format]] directory|file|device
ioping -h | -v
DESCRIPTION
This tool generates various I/O patterns and lets you monitor I/O speed and latency in
real time.
OPTIONS
-a, -warmup count
Ignore in statistics first count requests, default 1. First request usually is
much slower due to power-saving features.
-b, -burst count
Make series of count requests without delay, default 0. Aggressive power-saving
features slow down requests even after short delay.
-c, -count count
Stop after count requests, default 0 (infinite).
-e, -entropy seed
Set seed for random number generator, default 0 (random).
-i, -interval time
Set time between requests, default 1s.
-l, -speed-limit size
Set speed limit in size per second. Increases interval to request-size / speed.
-r, -rate-limit count
Set rate limit in count per second. Increases interval to 1 / rate.
-t, -min-time time
Minimal valid request time (0us). Too fast requests are ignored in statistics.
-T, -max-time time
Maximum valid request time. Too slow requests are ignored in statistics.
-s, -size size
Request size, default 4k.
-S, -work-size size
Working set size (1m for directory, whole size for file or device).
-o, -work-offset size
Starting offset in the file/device (0).
-w, -work-time time
Stop after time passed, default 0 (infinite).
-p, -print-count count
Print raw statistics for every count requests (see format below).
-P, -print-interval time
Print raw statistics for every time.
-A, -async
Use asynchronous I/O (io_setup(2), io_submit(2) etc syscalls).
-B, -batch
Batch mode. Be quiet and print final statistics in raw format.
-C, -cached
Use cached I/O. Suppress cache invalidation via posix_fadvise(2)) before read and
fdatasync(2) after each write.
-D, -direct
Use direct I/O (see O_DIRECT in open(2)).
-I, -time [format]
Print current time for each request. Optional argument defines time format in
strftime(3) notation, default is "%b %d %T" (Jan 01 00:00:00).
-J, -json
Print output in JSON format.
-L, -linear
Use sequential operations rather than random. This also sets default request size
to 256k (as in -size 256k).
-N, -nowait
Set RWF_NOWAIT on I/O, indicating to the kernel to do not wait if request cannot be
executed immediately. (see RWF_NOWAIT in preadv2(2))
-R, -rapid
Disk seek rate test, or bandwidth test if used together with -linear.
This option suppress human-readable output for each request (as -quiet), sets
default interval to zero (-interval 0), stops measurement after 3 seconds (-work-
time 3) and increases default working set size to 64m (-work-size 64m). Working
set (-work-size) should be increased accordingly if disk has huge hardware cache.
-W, -write
Use writes rather than reads. Safe for temporary file in directory target. Write
I/O gives more reliable results for systems where non-cached reads are not
supported or cached at some level.
Might be *DANGEROUS* for file/device: it will shred your data. In this case should
be repeated three times (-WWW).
-G, -read-write
Alternate read and write requests.
-Y, -sync
Use sync I/O (see O_SYNC in open(2)).
-y, -dsync
Use data sync I/O (see O_DSYNC in open(2)).
-k, -keep
Keep and reuse temporary working file "ioping.tmp" (only for directory target).
-q, -quiet
Suppress periodical human-readable output.
-h, -help
Display help message and exit.
-v, -version
Display version and exit.
Argument suffixes
For options that expect time argument (-interval, -print-interval and -work-time), default
is seconds, unless you specify one of the following suffixes (case-insensitive):
ns, nsec
nanoseconds (a billionth of a second, 1 / 1 000 000 000)
us, usec
microseconds (a millionth of a second, 1 / 1 000 000)
ms, msec
milliseconds (a thousandth of a second, 1 / 1 000)
s, sec seconds
m, min minutes
h, hour
hours
For options that expect "size" argument (-size, -speed-limit, -work-size and -work-
offset), default is bytes, unless you specify one of the following suffixes (case-
insensitive):
sector disk sectors (a sector is always 512).
KiB, k, kb
kilobytes (1 024 bytes)
page memory pages (a page is always 4KiB).
MiB, m, mb
megabytes (1 048 576 bytes)
GiB, g, gb
gigabytes (1 073 741 824 bytes)
TiB, t, tb
terabytes (1 099 511 627 776 bytes)
For options that expect "number" argument (-count and -print-count) you can optionally
specify one of the following suffixes (case-insensitive):
k kilo (thousands, 1 000)
m mega (millions, 1 000 000)
g giga (billions, 1 000 000 000)
t tera (trillions, 1 000 000 000 000)
EXIT STATUS
Returns 0 upon success. The following error codes are defined:
1 Invalid usage (error in arguments).
2 Error during preparation stage.
3 Error during runtime.
RAW STATISTICS
ioping -print-count 100 -count 200 -interval 0 -quiet .
99 10970974 9024 36961531 90437 110818 358872 30756 100 12516420
100 9573265 10446 42785821 86849 95733 154609 10548 100 10649035
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
(1) count of requests in statistics
(2) running time (nanoseconds)
(3) requests per second (iops)
(4) transfer speed (bytes per second)
(5) minimal request time (nanoseconds)
(6) average request time (nanoseconds)
(7) maximum request time (nanoseconds)
(8) request time standard deviation (nanoseconds)
(9) total requests (including warmup, too slow or too fast)
(10) total running time (nanoseconds)
JSON OUTPUT
With option -J|--json ioping prints json array of objects:
[
...
{
// timestamps
"timestamp": (unix time in seconds as float),
"localtime": (local time ISO 8601),
// io target
"target": {
"path": (target path),
"fstype": (filesystem name),
"device": (device name),
"device_size": (device size in bytes)
},
// io request
"io": {
"request": (request index),
"operation": (request type: "read" | "write"),
"size": (request size in bytes),
"time": (io time in ns),
"ignored": (ignored in statistics: true | false)
},
// statistics
"stat": {
"count": (nr reqeusts),
"size": (total io size in bytes),
"time": (total io time in ns),
"iops": (avg iops),
"bps": (avg rate),
"min": (min io time in ns),
"avg": (avg io time in ns),
"max": (max io time in ns),
"mdev": (standard deviation in ns)
},
// load statistics
"load": {
"count": (nr requests),
"size": (total io size in bytes),
"time": (total real time in ns),
"iops": (avg iops),
"bps": (avg rate)
},
},
...
]
EXAMPLES
ioping .
Show disk I/O latency using the default values and the current directory, until
interrupted. This command prepares temporary (unlinked/hidden) working file and
reads random chunks from it using non-cached read requests.
ioping -c 10 -s 1M /tmp
Measure latency on /tmp using 10 requests of 1 megabyte each.
ioping -R /dev/sda
Measure disk seek rate.
ioping -RL /dev/sda
Measure disk sequential speed.
ioping -RLB . | awk '{print $4}'
Get disk sequential speed in bytes per second.
ioping -J . | jq -r --stream 'fromstream(1|truncate_stream(inputs)) | [.localtime,
.io.time/1000000] | @tsv'
Select localtime and io time in milliseconds from json outout.
SEE ALSO
iostat(1), dd(1), fio(1), stress(1), stress-ng(1), dbench(1), sysbench(1), fsstress,
xfstests, hdparm(8), badblocks(8),
HOMEPAGE
⟨https://github.com/koct9i/ioping/⟩.
AUTHORS
This program was written by Konstantin Khlebnikov ⟨koct9i@gmail.com⟩.
Man-page was written by Kir Kolyshkin ⟨kir@openvz.org⟩.
Oct 2014 IOPING(1)