Provided by: jacktrip_1.10.0+ds-1_amd64 
NAME
JackTrip - high-quality system for audio network performances
SYNOPSIS
jacktrip [-s|-c|-S|-C hostIPAddressOrURL] [options]
DESCRIPTION
JackTrip: A System for High-Quality Audio Network Performance over the Internet Copyright
© 2008-2022 Juan-Pablo Caceres, Chris Chafe. SoundWIRE group at CCRMA, Stanford
University This build of JackTrip is subject to LGPL license. JackTrip source code is
released under MIT and GPL licenses. See LICENSE.md file for more information. VERSION:
1.10.0
OPTIONS
REQUIRED ARGUMENTS: One of:
-s, --server
Run in P2P Server Mode
-c, --client <peer_hostname_or_IP_num>
Run in P2P Client Mode
-S, --jacktripserver
Run in Hub Server Mode
-C, --pingtoserver <peer_name_or_IP>
Run in Hub Client Mode
OPTIONAL ARGUMENTS:
-n, --numchannels #
Number of Input and Output Channels (# greater than 0, default: 2)
--receivechannels #
Number of receive Channels from the network (# greater than 0)
--sendchannels #
Number of send Channels to the network (# greater than 0)
-q, --queue # (2 or more)
Queue Buffer Length, in Packet Size (default: 4)
-r, --redundancy # (1 or more)
Packet Redundancy to avoid glitches with packet losses (default: 1)
-o, --portoffset #
Receiving bind port and peer port offset from default 4464
-B, --bindport #
Set only the bind port number (default: 4464)
-P, --peerport #
Set only the peer port number (default: 4464)
-U, --udpbaseport
Set only the server udp base port number (default: 61002)
-b, --bitres # (8, 16, 24, 32)
Audio Bit Rate Resolutions (default: 16, 32 uses floating-point)
-z, --zerounderrun
Set buffer to zeros when underrun occurs (default: wavetable)
-t, --timeout
Quit after 10 seconds of no network activity
-l, --loopback
Run in Loop-Back Mode
-j, --jamlink
Run in JamLink Mode (Connect to a JamLink Box)
-J, --clientname
Change default client name (default: JackTrip)
-K, --remotename
Change default remote client name when connecting to a hub server (the default is
derived from this computer's external facing IP address)
--appendthreadid
Append thread ID to client names
-L, --localaddress
Change default local host IP address (default: 127.0.0.1)
-D, --nojackportsconnect
Don't connect default audio ports in jack
--bufstrategy # (0, 1, 2, 3, 4)
Use alternative jitter buffer
--broadcast <broadcast_queue>
Duplicate receive ports with the specified broadcast_queue length. Broadcast
outputs have higher latency but less packet loss.
--udprt
Use RT thread priority for network I/O
OPTIONS FOR AUDIO PATCHING IN HUB SERVER MODE:
-p, --hubpatch # (0, 1, 2, 3, 4, 5)
Hub auto audio patch, only has effect if running HUB SERVER mode,
0=server-to-clients, 1=client loopback, 2=client fan out/in but not loopback,
3=reserved for TUB, 4=full mix, 5=no auto patching (default: 0)
-i, --includeserver
Include audio to and from the server in the mix when patching. Only affects -p 2
(client fan out/in but not loopback) and -p 4 (full mix) patch modes.
-u, --upmix
Upmix mono clients to stereo when patching
OPTIONAL SIGNAL PROCESSING:
-f, --effects # | paramString | help
Turn on incoming and/or outgoing compressor and/or reverb in Client - see `-f help'
for details
-O, --overflowlimiting i|o[w]|io[w]|n|help
Use audio limiter(s) in Client, i=incoming from network, o=outgoing to network,
io=both, n=no limiters, w=warn if limiting (default=n). Say -O help for more.
-a, --assumednumclients help|# (1,2,..)
Assumed number of Clients (sources) mixing at Hub Server (otherwise 2 assumed by
-O)
-T, --srate #
Set the sampling rate, works only on some audio backends (default: 48000)
-F, --bufsize #
Set the buffer size, works only on some audio backends (default: 128)
ARGUMENTS TO DISPLAY IO STATISTICS:
-I, --iostat <time_in_secs>
Turn on IO stat reporting with specified interval (in seconds)
-G, --iostatlog <log_file>
Save stat log into a file (default: print in stdout)
-x, --examine-audio-delay <print_interval_in_secs> | help
Print round-trip audio delay statistics. See `-x help' for details.
ARGUMENTS TO SIMULATE NETWORK ISSUES:
--simloss <rate>
Simulate packet loss
--simjitter <rate>,<d>
Simulate jitter, d is max delay in packets
ARGUMENTS FOR HUB CLIENT/SERVER AUTHENTICATION:
-A, --auth
Use authentication on the client side, or require it on the server side
--certfile
The certificate file to use on the hub server
--keyfile
The private key file to use on the hub server
--credsfile
The file containing the stored usernames and passwords
--username
The username to use when connecting as a hub client (if not supplied here, this is
read from standard input)
--password
The password to use when connecting as a hub client (if not supplied here, this is
read from standard input)
ARGUMENTS FOR THE GUI:
--gui Force JackTrip to run with the GUI. If not using VirtualStudio mode, command line
switches in the required arguments, optional arguments (except -l, -j, -L,
--appendthreadid), audio patching, and authentication sections will be honoured,
and default settings will be used where arguments aren't supplied. Options from
other sections will be ignored (and the last used settings will be loaded), except
for -V, and the --version and --help switches which will override this.
HELP ARGUMENTS:
-v, --version
Prints Version Number
-V, --verbose
Verbose mode, prints debug messages
-h, --help
Prints this Help
COPYRIGHT
Copyright © 2008-2022 Juan-Pablo Caceres, Chris Chafe. SoundWIRE group at CCRMA, Stanford
University This build of JackTrip is subject to LGPL license. JackTrip source code is
released under MIT and GPL licenses. See LICENSE.md file for more information.