Ubuntu Manpage: lavrec - Record MJPEG-video from a zoran/video4linux-device

Provided by: mjpegtools_2.1.0+debian-7_amd64

NAME

       lavrec - Record MJPEG-video from a zoran/video4linux-device

SYNOPSIS

       lavrec [options] filename(s)

DESCRIPTION

       lavrec  can be used to record video in MJPEG format (either quicktime or AVI) from a zoran
       video-capture device, such as the Miro/Pinnacle DC10(+), the Iomega  Buz  or  Linux  Media
       Labs'  LML33, or from a generic video4linux device, such as the cheap Bt848 or Bt878 based
       TV-cards that are being sold in every computer shop around the corner.

OPTIONS

lavrec accepts the following options:

filename
The file to record to (*.avi, *.qt). Use a % to record to multiple files (using
file%02d.avi will record to file00.avi, file01.avi, etc). You can also give more
than one filename, which will have the same effect. This will avoid problems
resulting from filetype or filesystem size limits. AVI, for example, has a 2 GB
limit, as does ext2fs in 2.2.x kernels.

--software-encoding
By default, lavrec will capture in a mode that is only suitable for recording from
hardware MJPEG devices. Using this option will make lavrec use
software-JPEG-encoding (using libjpeg) which enables MJPEG-video-capture from many
generic video4linux devices (such as Bt848/Bt878-based ones).

--software-encoding-yuvp
This option adds support for the EM28XX USB driver. As this driver is V4L2. As the
original BTTV software implementation assumes that the driver supports V4L it will
not work with the EM28XX driver, not even with the V4L1 emulation layer. This
option enables two things:
It enables the V4L2 calls to make interaction with this driver possible
It select the cards YUV Packed format and converts this in software to YUV
Planar The process is after this the same as for the BTTV driver. ome things of
note are the fact that the EM28XX driver expects 48KHz audio recording. If you
choose slower things will work, but a lot of deleted/inserted frames will occur.
The lower the sample rate, the worse this problem gets. Recording at 48KHz is
therefore recommended. This code was tested and found working with a DVC100
Pinnacle Dazzle. This option should work with any EM28XX, but this hasnt been
tested. It might work for any other V4L2 device that outputs YUV packed format,
this has however not been tested. Feedback would be appreciated.

-f/--format [a|A|q|m]
The format in which the video should be saved to the harddisk.
a - MJPEG AVI
A - MJPEG AVI with fields exchanged
q - Quicktime
By default, lavrec will look at the extension of the first file (*.avi, *.qt) and
choose a format based on that.

-i/--input [p|P|n|N|s|S|t|T|f|a]
or

-i/--input input[:norm]
The recording source and the video source standard format.
p - PAL through Composite or 1st Bt8x8 input
P - PAL through SVHS- or 2nd Bt8x8 input
t - PAL through TV-tuner- or 3rd Bt8x8 input
n - NTSC through Composite or 1st Bt8x8 input
N - NTSC through SVHS- or 2nd Bt8x8 input
T - NTSC through TV-tuner- or 3rd Bt8x8 input
s - SECAM through Composite or 1st Bt8x8 input
S - SECAM through SVHS- or 2nd Bt8x8 input
f - SECAM through TV-tuner- or 3rd Bt8x8 input
a - (or every other letter) Autosense (default)
The input can be specified using either single letters or an input number with an
optional norm, where the number specifies the n'th input of the card, ranging from
1 to 10. Using a numerical input is necessary when using input four or higher with
a card that has more than three inputs, for instance the AverMedia 6 Eyes. When
using numeric input with the norm it must contain the whole norm name; valid names
are pal, ntsc and secam. You can use numeric input selection for cards with only
three inputs, too, which most Zoran based cards has. "-i 2:pal" used with a Buz
would be equivalent to "-i P", recording from the S-Video input in PAL format.

-d/--decimation num
Recording decimation, either 1, 2 or 4. This will decimate the size of the
recorded video horizontally and vertically. To use different horizontal and
vertical decimations, use two numbers, the first one being the horizontal and the
second one being the vertical (-d 12). Note: this option can only be used during
hardware recording.

-g/--geometry WxH(+X+Y)
For hardware recording: An X-style geometry string, giving the geometry of the
undecimated subframe to record. The default is the full frame, so 720x576/480+0+0
for Buz/LML33-users and 640x480+0+0 or 768x576+0+0 for DC10(+)-users. For
software recording: The size of the video to be captured. Currently, width and
height need to be a multiple of 16. You always capture the full frame since most
video4linux devices don´t support subframe capture.

-q/--quality num
Quality of the JPEG-video to be recorded (in percent). This must be a number
between 0 and 100. Lower quality should generally mean lower filesize, higher
quality will take more diskspace but will give more detailed perfectness in the
resulting recorded video. Default is 50%.

-C/--channel LIST:CHAN
Choose the channel to record from (xawtv-style). By default, lavrec will just use
the current TV channel.

-t/--time num
Recording time in seconds. The default is unlimited. To stop capturing video while
recording, use Ctrl-C.

-S/--single-frame
Single-frame capture mode. This means that one can capture individual frames from
the capture device.

-T/--time-lapse num
time-lapse factor, which means that only every <num>th frame is saved to the
recording file.

-w/--wait
If this option is given, lavrec will wait for the user to press enter before
starting to record.

-B/--batch
This option turns off all possible interactivity options and limits console output
as much as possible. Useful for cron/scheduled recordings.

-a/--audio-bitsize num
Audio size in bits, either 0, 8 or 16 (default). 0 means no audio.

-r/--audio-bitrate num
Audio sampling rate in Hz. This must be a sampling rate which is supported by the
soundcard. Often-supported audio sampling rate values are 11025, 22050 or 44100
(default).

-s/--stereo
Capture in stereo. By default, lavrec captures in mono.

-l/--audio-volume num
Recording level. This must be a value between 0 (no sound) and 100 (loud
recording). -1 (default) means to not touch the mixer settings at all.

-m/--mute
Mute sound output while recording. This can be useful when recording sound from
the microphone to disable echos. This option is disabled by default.

-R/--audio-source [l|m|c]
Recording source, either (l)ine-in, (m)icrophone or (c)d-rom. The default is to
record from line-in (l).

-U/--use-read
Use the read() system call rather than the mmap() system call for audio recording.
This may fix many audio recording problems.

-c/--synchronization [0|1|2]
Audio/video synchronization level efforts. (0) means no synchronization, (1) means
that lavrec will replicate frames for lost frames. (2) means that lavrec will
replicate frames for lost frames and do sync correction. Default is 2.

-n/--mjpeg-buffers num
Number of MJPEG-buffers. Default is 32. Try changing this number if you have many
lost frames.

-b/--mjpeg-buffer-size num
MJPEG buffersize in kilobytes. The default is 256 kB.

--max-file-size num
The maximum file size per JPEG file. By default, lavrec uses the maximum possible
size for that specific recording format.

--max-file-frames num
The maximum number of frames per per JPEG file. By default, the number of frames
is only limited by other factors, such as maximum file size.

--file-flush num
Flush the file to disk after every num frames captured.

-v/--verbose num
Verbosity level (0, 1 or 2). Default is 0.

ENVIRONMENT

       The following environment variables can be recognized by lavrec:

       LAV_VIDEO_DEV
               The video device. Default is /dev/video

       LAV_AUDIO_DEV
               The audio device. Default is /dev/dsp

       LAV_MIXER_DEV
               The mixer device. Default is /dev/mixer

OUTPUT

       Lavrec will output the current recording state. Typically, this looks like:
       0.06.14:22 int: 00040 lst:0 ins:0 del:0 ae:0 td1=0.014 td2=0.029
       The  first  part  is  the  time that has been spent recording (hours - minutes - seconds -
       frames).  int is the interval (in milliseconds) between two captured frames  (this  should
       be  around  40 for PAL/SECAM and 33 for NTSC).  lst is the number of lost frames.  ins and
       del are the number of frames inserted and deleted for sync correction.  ae is  the  number
       of audio errors.  td1 and td2 are the audio/video time-difference (out-of-sync'ness).

TYPICAL RECORDING SESSIONS

       Okay,  that's  a  lot of options. Now how would I normally record video?  Let's assume you
       want to record at VCD resolution (352x288) from PAL source.  You might  want  some  higher
       quality  than default (80%). You use default audio options and record to an AVI file. That
       having said, your recording command line would look like:

       From hardware MJPEG devices (S-video input)
               lavrec --format=a --input=P --quality=80 --decimation=2 /path/to/file.avi

       From normal video4linux devices
               lavrec --software-encoding --format=a  --input=p  --quality=80  --geometry=352x288
               /path/to/file.avi

BUGS

       lavrec  should  be  able  to detect automatically whether to use software JPEG encoding or
       whether to use the card's hardware JPEG encoding features (if available).

       Besides that, software JPEG encoding seems,  for  some  people,  to  cause  small  out-of-
       sync'ness. SMP support for JPEG encoding is currently work-in-progress.

AUTHOR

       This man page was written by Ronald Bultje.
       If  you  have questions, remarks, problems or you just want to contact the developers, the
       main mailing list for the MJPEG-tools is:
           mjpeg-users@lists.sourceforge.net
       For more info, see our website at
           http://mjpeg.sourceforge.net/